Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Effect of Ni content in Cu 1-x Ni x coating on microstructure evolution and mechanical properties of W/Mo joint via low-temperature diffusion bonding

The 93W and Mo1 refractory metals were bonded with different Cu 1- x Ni x coating interlayers of various Ni content using plasma-activated sintering at 700 °C. The effects of the Ni content in the Cu 1- x Ni x coating interlayer on the interfacial microstructure evolution and mechanical properties of the W/Mo joints were studied. The maximum average shear strength of the W/Mo joint was 316.5 MPa when the Ni content of the Cu 1- x Ni x coating interlayer was 25 %. When the Ni content of the Cu 1- x Ni x coating interlayer was below 50 %, the atomic diffusion at the W/Mo joint interface was adequate without the formation of intermetallic compounds, as demonstrated by the High Resolution Transmission Electron Microscope analyses of the joints. The presence of Ni in Cu 1- x Ni x promoted diffusion bonding at the interface, which contributed to the high mechanical properties of the W/Mo joint. With an increase in the Ni content of the Cu 1- x Ni x coating interlayer, the MoNi intermetallic compound (IMC) nucleated and grew at the Cu 1- x Ni x coating/Mo1 interface. When the Ni content of the Cu 1- x Ni x coating interlayer was above 50 %, the generation of a brittle MoNi IMC weakened the shear strength of the W/Mo joint dramatically.

36 MATERIALS SCIENCE↗

Electronic structure and optical properties of the HoCoSi and ErNiSi compounds

The electronic structure and the optical properties of the HoCoSi and ErNiSi compounds are studied. Spin-polarized band calculations are performed in the local electron density approximation corrected for the strong electron–electron interactions in the 4f shell of a rare-earth ion (LSDA + U method [11]). The optical constants are measured by ellipsometry in a wide wavelength range, and the frequency dependences of a number of spectral parameters are determined. The calculated densities of states are used to interpret the structural features of the interband optical conductivities of the intermetallic compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical Hydrogen Evolution at Ordered Mo 7 Ni 7

Ni–Mo alloys containing up to ~15 mol % Mo are excellent non-noble electrocatalysts for the hydrogen evolution reaction (HER) in alkaline aqueous electrolytes. To date, studies have not addressed the details of HER activity of ordered Ni–Mo intermetallic compounds, which can contain a significantly larger fraction of Mo (up to 50 mol %) than can be accessed through high-temperature alloying. Here, we present a straightforward and facile synthesis of three phase-pure electrocatalyst powders using a precipitation–reduction approach: ordered Mo7Ni7, disordered Ni0.92Mo0.08, and pure Ni. The Ni0.92Mo0.08 alloy exhibited a nearly 10-fold higher mass-specific HER activity than either pure Ni or Mo7Ni7, where much of the difference could be attributed to relative surface area. Therefore, we attempted to quantify and account for differences in surface areas using electron microscopy, impedance spectroscopy, and gas adsorption measurements. These data suggest that Ni–Mo alloys and intermetallic compounds exhibit substantial pseudocapacitance at potentials near the onset of hydrogen evolution, which can cause impedance spectroscopy to overestimate the interfacial capacitance, and thus the electrochemically active surface area, of these materials. From these observations, we postulate Mo redox activity as the chemical basis for the observed pseudocapacitance of Ni–Mo composites. Furthermore, using gas adsorption measurements, rather than capacitance, to estimate active surface area, we find that ordered Mo7Ni7 is more intrinsically active than the Ni0.92Mo0.08 alloy, implying that Mo7Ni7 intermetallics with high surface area will also give higher mass-specific activities than alloys with comparable roughness.

36 MATERIALS SCIENCE↗

Multiple superconducting states induced by pressure in Mo 3 Sb 7

Tuning competing ordering mechanisms with hydrostatic pressure in the 4 d intermetallic compound Mo 3 Sb 7 reveals an intricate interplay of structure, magnetism, and superconductivity. Synchrotron x-ray diffraction and magnetic susceptibility measurements, both employing diamond anvil cell technologies, link a first-order structural phase transition to a doubling of the superconducting transition temperature. In contrast to the spin-dimer picture for Mo 3 Sb 7 , we deduce from x-ray absorption near-edge structure and dc magnetization measurements at ambient pressure that Mo 3 Sb 7 should possess only very small, itinerant magnetic moments. As a result, the pressure evolution of the superconducting transition temperature strongly suggests its enhancement is due to a difference in the phonon density-of-states with changed crystal symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creating Binary Cu–Bi Compounds via High-Pressure Synthesis: A Combined Experimental and Theoretical Study

Exploration beyond the known phase space of thermodynamically stable compounds into the realm of metastable materials is a frontier of materials chemistry. The application of high pressure in experiment and theory provides a powerful vector by which to explore this uncharted phase space, allowing discovery of complex new structures and bonding in the solid state. We harnessed this approach for the Cu–Bi system, where the realization of new phases offers potential for exotic properties such as superconductivity. This potential is due to the presence of bismuth, which, by virtue of its status as one of the heaviest stable elements, forms a critical component in emergent materials such as superconductors and topological insulators. To fully investigate and understand the Cu–Bi system, we welded theoretical predictions with experiment to probe the Cu–Bi system under high pressures. By employing the powerful approach of in situ X-ray diffraction in a laser-heated diamond anvil cell (LHDAC), we thoroughly explored the high-pressure and high-temperature (high-PT) phase space to gain insight into the formation of intermetallic compounds at these conditions. We employed density functional theory (DFT) calculations to calculate a pressure versus temperature phase diagram, which correctly predicts that CuBi is stabilized at lower pressures than Cu11Bi7, and allows us to uncover the thermodynamic contributions responsible for the stability of each phase. Detailed comparisons between the NiAs structure type and the two high-pressure Cu–Bi phases, Cu11Bi7 and CuBi, reveal the preference for elemental segregation within the Cu–Bi phases, and highlight the unique channels and layers formed by ordered Cu vacancies. The electron localization function from DFT calculations account for the presence of these “voids” as a manifestation of the lone pair orientation on the Bi atoms. Our study demonstrates the power of joint experimental–computational work in exploring the chemistry occurring at high-PT conditions. The existence of multiple high-pressure-stabilized phases in the Cu–Bi binary system, which can be readily identified with in situ techniques, offers promise for other systems in which no ambient pressure phases are known to exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Structure, and Complex Magnetism of MIr 2 In 8 (M = Eu, Sr)

In this paper, we report the synthesis, crystal structure, and physical properties of two new polar intermetallic compounds, EuIr 2 In 8 and SrIr 2 In 8 . Both were synthesized in good yield using In metal as a reactive flux medium, enabling the growth of large crystals for physical property measurements. They crystallize in the orthorhombic space group Pbam with the CeFe 2 Al 8 structure type, which is sometimes also referred to as the CaCo 2 Al 8 structure type. The two analogues have unit cell parameters of a = 13.847(3) Å, b = 16.118(3) Å, and c = 4.3885(9) Å for M = Eu and a = 13.847(3) Å, b = 16.113(3) Å, and c = 4.3962(9) Å for M = Sr at room temperature. SrIr 2 In 8 is a diamagnetic metal with no local magnetic moments on either the Sr or Ir sites, and the diamagnetic contribution from core electrons overwhelms the expected Pauli paramagnetism normally seen in intermetallic compounds. Magnetism in EuIr 2 In 8 is dominated by the local Eu moments, which order antiferromagnetically at 5 K in low applied fields. Increasing the field strength depresses the magnetic ordering temperature and also induces a spin reorientation at lower temperature, indicating complex competing magnetic interactions. Finally, low-temperature heat capacity measurements show a significant enhancement of the Sommerfeld coefficient in EuIr 2 In 8 relative to that in SrIr 2 In 8 , with estimated values of γ = 118(3) and 18.0(2) mJ mol –1 K –2 , respectively.

36 MATERIALS SCIENCE↗

New CeMgCo{sub 4} and Ce{sub 2}MgCo{sub 9} compounds: Hydrogenation properties and crystal structure of hydrides

Two new ternary intermetallic compounds, CeMgCo{sub 4} (C15b pseudo-Laves phase, MgCu{sub 4}Sn type) and Ce{sub 2}MgCo{sub 9} (substitution derivative of PuNi{sub 3} type) were synthesized by mechanical alloying method. The structural and hydrogenation properties of these compounds were studied by X-ray diffraction and Pressure-Composition-Temperature measurements. Both compounds absorb hydrogen at room temperature and pressures below 10 MPa forming hydrides with maximum compositions CeMgCo{sub 4}H{sub 6} and Ce{sub 2}MgCo{sub 9}H{sub 12}. Single plateau behavior was observed in P-C isotherm during hydrogen absorption/desorption by Ce{sub 2}MgCo{sub 9} alloy. The CeMgCo{sub 4}-H{sub 2} system is characterized by the presence of two absorption/desorption plateaus corresponding to formation of {beta}-CeMgCo{sub 4}H{sub 4} and {gamma}-CeMgCo{sub 4}H{sub 6} hydride phases. The structure of {beta}-hydride CeMgCo{sub 4}H(D){sub 4} was determined from X-ray and neutron powder diffraction data. In this structure initial cubic symmetry of CeMgCo{sub 4} is preserved and hydrogen atoms fill only one type of interstitial sites, triangular MgCo{sub 2} faces. These positions are occupied by 70% and form octahedron around Mg atom with Mg-D bond distances 1.84 A. - Graphical abstract: Crystal structure of the {beta}-CeMgCo{sub 4}D{sub 4.2} deuteride. Octahedra of D-sites around Mg atoms are shown. Highlights: Black-Right-Pointing-Pointer Two new ternary compounds have been synthesized in the Ce-Mg-Co system. Black-Right-Pointing-Pointer Below 100 bar H{sub 2} CeMgCo{sub 4} and Ce{sub 2}MgCo{sub 9} reversibly absorb hydrogen at room temperature. Black-Right-Pointing-Pointer Crystal structure of cubic CeMgCo{sub 4}D{sub 4.2} deuteride has been determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying the Role of APB Tubes on the Work-hardening of Ordered Phases

For sixty years, it has been theorized that antiphase boundary (APB) tubes, which are defects produced by deformation, contribute to the high strength of ordered alloys or intermetallic compounds. The concept of an APB tube was originally proposed by Vidoz and Brown [A.E. Vidoz, L.M. Brown, "On work-hardening in ordered alloys", Philosophical Magazine, 7 (1962) 1167–1175] in 1962 to explain the ~50% increase in strength observed when an alloy, such as Ni 3 Fe, is chemically ordered compared to when it is disordered. The existence of APB tubes was only definitively confirmed by Chou and Hirsch in 1981 [C.T. Chou, P.B. Hirsch Antiphase domain boundary tubes in plastically deformed ordered Fe 30.5 at.% Al alloy, Philosophical Magazine, A. 44 (1981) 1415–1419] using a transmission electron microscope (TEM). Prior to the current work, there had been no studies trying to correlate the presence of APB tubes with their effect on the mechanical properties. The main finding of this project was that APB tubes do not contribute to the strength of the strongly-ordered intermetallic compounds FeAl and Ni 3 Al. This was shown by removing the APB tubes by heating the materials and showing that the mechanical properties were unaffected. In addition, in-situ deformation experiments were undertaken in a TEM on both disordered and ordered Ni 3 Fe, in which it was shown that defects (superdislocations) in the ordered alloy underwent many more interaction events than defect (dislocations) in the disordered alloy. This difference can explain the increase in the increase in strength observed when this material is ordered. The project supported a PhD student, Rachel Osmundsen, who successfully defended her thesis in April, 2022. It also supported the principal investigator, Ian Baker, two PhD exchange students and an undergraduate researcher. The work involved collaborations with the following people and use of the following facilities: Dr. Si Chen, Advanced Photon Source at Argonne National Laboratory, for synchrotron X-ray diffraction; and Dr. Katherine Shanks and Dr. Kelly Nygren, Cornell High Energy Synchrotron Source (CHESS), for synchrotron X-ray diffraction. The work led to 12 papers published in refereed journals with two papers currently submitted to journals. There were also 16 presentation made at conferences and universities on the work, ten of which were invited.

36 MATERIALS SCIENCE↗

Structure and Phase Transformation in the Giant Magnetostriction Laves-Phase SmFe 2

As one class of the most important intermetallic compounds, the binary Laves-phase is well-known for their abundant magnetic properties. Samarium-iron alloy system, SmFe 2 , is a prototypical Laves compound that shows strong negative magnetostriction but relatively weak magnetocrystalline anisotropy. SmFe 2 has been identified as a cubic Fd$ \overline{3}\ $m structure at room temperature, however, the cubic symmetry does not match the spontaneous magnetization along the [111] cubic direction. Here we studied the crystal structure of SmFe 2 by high-resolution synchrotron X-ray powder diffraction and X-ray total scattering methods. SmFe 2 is found to adopt a centrosymmetric trigonal R$ \overline{3}\ $m structure at room temperature, which transforms to an orthorhombic Imma structure at 200 K. This transition is in agreement with the changes of easy magnetization direction from [111] cubic to [110] cubic direction, and is further evidenced by the inflexion of thermal expansion behavior, the sharp decline of the magnetic susceptibility in the FC-ZFC curve, and the anomaly in the specific heat capacity measurement. Lastly, the revised structure and phase transformation of SmFe 2 could be useful to understand the magnetostriction and related physical properties of other RM 2 -type pseudo-cubic Laves-phase intermetallic compounds.

36 MATERIALS SCIENCE↗

CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17): Site-Selective Substitution, Electronic Structure, Chemical Bonding, and Structural Transformation

CoSn-type intermetallic compounds have emerged as a model platform for Kagome-derived flat-band physics, where subtle chemical perturbations can strongly influence electronic structure and phase stability. Here, we present a combined experimental and theoretical study of Sb-substitution in CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17) to elucidate the interplay between site selectivity, solubility limit, chemical bonding, and electronic structure. Rietveld refinements on Neutron powder diffraction data confirmed the selective Sb-substitution at the electron-rich In2 (2d) site forming the honeycomb substructure, while the In1 (1a) site within the Kagome layer remains exclusively occupied by In. Density functional theory (DFT) calculations revealed that pristine CoSn-type NiIn hosts Ni 3d-dominated flat bands near the Fermi level (EF), originating from the Kagome-like Ni substructure. Partial replacement of In by Sb within the honeycomb layer alters these flat-band features below EF, reducing the density of states and suppressing the flat-band topology near the Fermi level. Orbital-resolved electronic structure and chemical-bonding analyses show that Sb-substitution enhances Ni-p-block (In/Sb) covalency and optimizes charge compensation, stabilizing the CoSn-type structure up to the solubility limit x ≈ 0.17. Beyond the limit, the higher-Sb compositions show satellite reflections consistent with an incommensurately modulated phase. These results establish a link between site-selective chemical substitution, bonding optimization, and flat-band electronic structure evolution, providing fundamental insights into how chemical substitution influences the electronic properties of Kagome-based intermetallic compounds.

Roy, Nilanjan [National Institute of Technology Si↗

Hydrogenation of palladium rich compounds of aluminium, gallium and indium

Palladium rich intermetallic compounds of aluminium, gallium and indium have been studied before and after hydrogenation by powder X-ray diffraction and during hydrogenation by in situ thermal analysis (DSC) at hydrogen gas pressures up to 39 MPa and temperatures up to 700 K. Very weak DSC signals and small unit cell increases of below 1% for AlPd{sub 2}, AlPd{sub 3}, GaPd{sub 2}, Ga{sub 5}Pd{sub 13}, In{sub 3}Pd{sub 5}, and InPd{sub 2} suggest negligible hydrogen uptake. In contrast, for both tetragonal modifications of InPd{sub 3} (ZrAl{sub 3} and TiAl{sub 3} type), heating to 523 K at 2 MPa hydrogen pressure leads to a rearrangement of the intermetallic structure to a cubic AuCu{sub 3} type with an increase in unit cell volume per formula unit by 3.6-3.9%. Gravimetric analysis suggests a composition InPd{sub 3}H{sub a}pprox{sub 0.8} for the hydrogenation product. Very similar behaviour is found for the deuteration of InPd{sub 3}. - Graphical abstract: In situ differential scanning calorimetry of the hydrogenation of tetragonal InPd{sub 3} (ZrAl{sub 3} type) at 1.3 MPa hydrogen pressure.

36 MATERIALS SCIENCE↗

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗

Observations of a dynamical-to-kinematic diffraction transition in plastically deformed polycrystalline intermetallic YCu

Unlike most intermetallic compounds, polycrystalline YCu, a B2 (CsCl-type) intermetallic, is ductile at room temperature. The mechanisms for this behavior are not fully understood. In situ neutron diffraction was used to investigate whether a stress-induced phase transformation or twinning contribute to the ductility; however, neither mechanism was found to be active in YCu. Surprisingly, this study revealed that the intensities of the diffraction peaks increased after plastic deformation. It is thought that annealing the samples created nearly perfect crystallinity, and subsequent deformation reduced this high degree of lattice coherency, resulting in a modified mosaic structure that decreased or eliminated the extinction effect. Analysis of changes in diffraction peak intensity showed a region of primary plasticity that exhibits significant changes in diffraction behavior. Fully annealed samples initially contain diffracting volumes large enough to follow the dynamical theory of diffraction. When loaded beyond the yield point, dislocation motion disrupts the lattice perfection, and the diffracting volume is reduced to the point that diffraction follows the kinematic theory of diffraction. Since the sample preparation and deformation mechanisms present in this study are common in numerous material systems, this dynamical to kinematic diffraction transition should also be considered in other diffraction experiments. These measurements also suggest the possibility of a new method of investigating structural characteristics. (C) 2014 Published by Elsevier Ltd. on behalf of Acta Materialia Inc.

36 MATERIALS SCIENCE↗

Interface-correlated bonding properties for a roll-bonded Ti/Al 2-ply sheet

Highlights: • The feasible post roll-bonding annealing condition of Ti/Al clad was deduced. • The optimum thickness of the TiAl{sub 3} IMC diffusive layer is about 200 nm. • A ‘zipper-like’ failure mode at the interface yields the maximum bonding strength. - Abstract: We investigated the influence of annealing conditions on the interface-correlated microstructural evolution and subsequent bonding properties of a warm roll-bonded Ti/Al clad sheet. A TiAl{sub 3} intermetallic compound layer with a thickness of 160 nm was initially generated at the joint interface between the Ti and Al alloys by warm rolling. When the annealing time and temperature were increased to a maximum of 6 h and 650 °C, respectively, the thickness of the TiAl{sub 3} layer increased to 320 nm. The feasible annealing conditions for the optimum bonding strength were within 550 °C-6 h and 600 °C-3 h. An improvement in the bonding strength between Ti and Al is strongly correlated with the generation of considerable metallurgical bonding. This is manifested in the zipper-like failure mode that occurs at the TiAl{sub 3} joint interface for a layer thickness of less than 300 nm.

36 MATERIALS SCIENCE↗

Study on a novel orientation domain of Mg17Ce2 in aged Mg–Y–Ce alloy by HAADF–STEM

Highlights: • A novel 90 degree orientation domain is verified in Mg{sub 17}Ce{sub 2} granules. • Orientations of domain–Ι and Π are parallel and perpendicular to α-Mg matrix. • A 〈 1-bar 010〉 direction is unchanged among domain–Ι, domain–Π and α-Mg matrix. • Domain–Ι matches the α-Mg matrix better than the domain–Π. - Abstract: After solid solution and aging treatment, Mg–3.0 wt%Y–1.0 wt%Ce ternary alloys were characterized using high angle annular dark field scanning transmission electron microscopy. The main precipitates are dominated by β{sup ′} phase and Mg{sub 17}Ce{sub 2}, a Ni{sub 17}Th{sub 2}–type intermetallic compound. An orientation domain can be discerned generally in Mg{sub 17}Ce{sub 2} granules. This domain structure of Mg{sub 17}Ce{sub 2} always consists of two types of domains (defined as domain–Ι and domain–Π) with a 90 degree orientation difference. In terms of crystallographic orientation relationships among α-Mg matrix and both domains, the domain–Ι is parallel to α-Mg matrix, whereas, the domain–Π is perpendicular to α-Mg matrix. It can be certain that a 〈 1-bar 010〉 direction is an unchanged orientation. Due to nearly equal values of lattice parameters (a and c) of Mg{sub 17}Ce{sub 2}, both domain–Ι and domain–Π can matches well with α-Mg matrix. Comparatively, the interfacial matching between domain–Ι and α-Mg matrix is better, suggesting that the domain–Ι is dominant.

36 MATERIALS SCIENCE↗