Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

An exciton crystal in a moiré excitonic insulator

Strong Coulomb interactions can drive electrons to crystallize into a Wigner lattice. Achieving the bosonic analogue—a crystal of excitons—has remained challenging owing to their short lifetimes and weaker interactions. Here we report the observation of a thermodynamically stable exciton crystal in an excitonic insulator coupled to a moiré potential. Using an electron–hole bilayer composed of a monolayer MoSe 2 and a WS 2 /WSe 2 moiré superlattice, we constructed a tunable extended Bose–Hubbard system with electrical control over exciton and charge doping in thermal equilibrium. Optical spectroscopy revealed spontaneous crystallization of long-lived excitons at one exciton filling per three moiré sites, manifested as strong Umklapp scattering peaks. Exciton transport measurements further showed a pronounced exciton resistance peak at the same filling. When doped away from net charge neutrality, this moiré electron–hole bilayer can host correlated insulating phases in which dipolar excitonic insulators form on top of the background of a hole Mott insulator or generalized Wigner crystals. In conclusion, these findings establish moiré electron–hole bilayers as a versatile platform for realizing correlated crystalline phases of bosons and fermions.

Qi, Ruishi [University of California, Berkeley, CA↗
DOE OSTI2024

Surfactant templated biogenic nanoporous silica thermal insulation composite

Carbon-sequestration biogenic insulation materials offer a promising solution for sustainable and energy-efficient buildings. However, minimizing energy-intensive manufacturing processes and ensuring a uniform microstructure are essential to achieve widespread application. In this work, we introduce cetyltrimethylammonium bromide (CTAB) surfactant as both synthesis and dispersion template for nanoporous silica to create biogenic straw-based thermal insulation composites. As the amount of nanoporous silica increases to 72 wt%, the elastic insulation composite dried using the solvent exchange method exhibits a density of 0.058 g cm –3 , a thermal conductivity of 30.3 mW m –1 K –1 and a flexural modulus of 3.96 MPa, while demonstrating materials circularity and fire retardance. The use of CTAB surfactant effectively captures nanoporous silica, preventing its loss during manufacturing and enhancing the homogeneity and dispersion of the silica within the composite. In addition, the results show that the ethanol solvent exchange drying at ambient conditions provides the optimum thermal insulation performance with less energy consumption compared to freeze-drying.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nonlinear electrical transport near the metal–insulator transition in V 4 O 7 thin films

Nonlinear electrical transport associated with correlated electronic states has been widely investigated in transition-metal oxides near metal–insulator transitions. Here, in this study, we investigate nonlinear transport and threshold switching in sputter-deposited V 4 O 7 thin films grown on fused silica substrates. Temperature-dependent transport measurements show a metal–insulator transition near 240 K with negligible thermal hysteresis, defining the temperature scale that governs the nonlinear electrical response. Current–voltage measurements reveal reproducible bipolar threshold switching over a broad temperature range, with the threshold voltage decreasing systematically as the transition temperature is approached. Electrothermal finite-element simulations reproduce the measured switching characteristics and show that switching occurs when localized Joule heating drives a confined region of the device toward the transition temperature. The simulated peak local temperature at threshold lies close to the intrinsic metal–insulator transition temperature of V 4 O 7 , establishing that the nonlinear electrical response originates from electrothermal feedback acting on the strongly temperature-dependent conductivity near the transition. These results identify V 4 O 7 thin films as a model correlated-oxide system in which volatile threshold switching emerges from proximity to an extended metal–insulator transition.

25 ENERGY STORAGE↗
DOE OSTI2025

Role of magnetic and structural symmetry breaking in forming the Mott insulating gap in Nb 3 ⁢Cl 8

The α-phase of the gapped insulator Nb 3 Cl 8 has recently emerged as the long-sought critical testing bed for examining the importance of strong interelectronic correlation vs symmetry breaking in understanding insulation of such Mott compounds. Structural symmetry breaking detected by density functional theory (DFT) energy lowering (such as dimer formation, disproportionation, or Jahn-Teller distortions) explains insulation in both d-electron Mott-like systems and in non-d-electron cases without recourse to strong correlation. Yet, in Nb 3 Cl 8 , structural symmetry breaking alone (viz. formation of Nb trimers) fails to explain insulation, leading instead to a partially occupied metallic flat band, in contrast with experimental observations. We examine the role of magnetic symmetry breaking, noting that Nb 3 Cl 8 is an observed paramagnet (not an antiferromagnet), thus potentially carrying also short-range ordered magnetic moments. Describing the latter as a polymorphous distribution of nonzero local moments with total zero net magnetization is demonstrated to lower the DFT total energy, while gapping the system without recourse to strong correlation or long-range magnetic order. This suggests that degeneracy removal by symmetry breaking in mean-field-like approaches—either structural, or magnetic, or both—can reduce or eliminate the need for strong correlation, allowing the use of DFT for such Mott systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Fermiology and transport properties of the candidate topological crystalline insulator SrAg 4 ⁢Sb 2

Compared to time-reversal symmetry-protected ℤ 2 topological insulators and Dirac/Weyl semimetals, there are significantly fewer candidates for topological crystalline insulators. SrAg 4 ⁢Sb 2 is predicted to exhibit topological crystalline insulator behavior when considering spin-orbit coupling. In this study, we systematically investigate single crystals of SrAg 4 ⁢Sb 2 using electrical transport and magnetic torque measurements, along with first-principles calculations. Our transport data reveals its compensated semimetal nature with a magnetoresistance up to around 700% at 2 K and 9 T. Analysis of de Haas–van Alphen oscillations uncovers a Fermi surface consisting of three distinct Fermi pockets with light effective masses. Comparison between the three-dimensional fermiology obtained from our oscillation data and the first-principles calculations demonstrates excellent agreement. This confirms the accuracy of the calculations, which indicate a band inversion centered at the 𝑇 point and identify the existence of nontrivial tube and needle hole Fermi pockets at Γ, alongside one trivial diamond electron pocket at the 𝐹 point in the Brillouin zone. Furthermore, symmetry and topology analysis results in two potential sets of topological invariants, suggesting the emergence of two-dimensional gapless Dirac surface states either on the 𝑎⁢𝑏 planes or on both the 𝑎⁢𝑏 planes and mirror planes, protected by crystal symmetries. Therefore, SrAg 4 ⁢Sb 2 emerges as a promising candidate topological crystalline insulator.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal activation signatures of the Anderson insulator and the Wigner solid forming near ν = 1

When interactions overcome disorder, integer quantum Hall plateaus support topological phases with different bulk insulators. In the center of the ν = 1 plateau the bulk is an Anderson-type insulator, while in the flanks of the plateau the bulk is the integer quantum Hall Wigner solid. We find that the activation energy along the ν = 1 plateau exhibits a very dramatic nonmonotonic dependence on the magnetic field, a dependence that is strongly correlated with the stability regions of the two phases. Furthermore, the activation energy has an unexpected minimum at the boundary between the Anderson insulator and the Wigner solid. Our findings constrain the theory of the integer quantum Hall Wigner solid, determine its thermodynamic properties, and reveal unusual behavior at the boundary between the Anderson insulator and the Wigner solid. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using state of the art laser technology

The increasing complexity and scale of pulsed power systems necessitate effective maintenance strategies to ensure optimal performance and safety. This report investigates the automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using advanced laser cleaning technologies. The motivation for this research stems from the limitations of current manual cleaning methods, which are labor-intensive and pose health risks due to hazardous materials. The study addresses the problem of surface flashover, a significant issue affecting insulator performance, by evaluating two innovative cleaning techniques: Pulsed Laser Cleaning (PLC) and Flash Lamp Annealing (FLA). Experimental results demonstrate that PLC effectively restores the dielectric strength of Rexolite insulators, while FLA shows limited success. The findings highlight the potential for automated cleaning solutions to enhance safety and efficiency in insulator maintenance, paving the way for future advancements in pulsed power technology.

42 ENGINEERING↗
NASA NTRS1972

Alternator insulation evaluation tests

Tests were conducted to predict the remaining electrical insulation life of a 60 KW homopolar inductor alternator following completion of NASA turbo-alternator endurance tests for SNAP-8 space electrical power systems application. The insulation quality was established for two alternators following completion of these tests. A step-temperature aging test procedure was developed for insulation life prediction and applied to one of the two alternators. Armature winding insulation life of over 80,000 hours for an average winding temperature of 248 degrees C was predicted using the developed procedure.

Penn, W. B.↗
NASA NTRS1972

Status of reusable surface insulation thermal protection system technology programs

The development of three low-density rigidized insulation materials for the shuttle TPS application is reported. These materials consist of one high purity silica system and two systems based on mullite, an aluminum silicate. Both systems consist of fibers joined together with appropriate binders to obtain a rigidized insulation composite. Both material systems require the application of a glassy coating to provide a wear resistant, high emittance surface and to prevent the absorption of water by the fiber matrix. The technology program has addressed the development of water impervious coatings, methods of assembling the materials in design concepts while minimizing the thermal stress in the insulation, achieving compatibility between the RSI material and the structural system, and test evaluations to demonstrate the feasibility of the surface insulation concept.

Greenshields, D. H.↗
NASA NTRS1972

Development of advanced materials composites for use as insulations for LH2 tanks

A study of internal insulation materials and fabrication processes for space shuttle LH2 tanks is reported. Emphasis was placed on an insulation system capable of reentry and multiple reuse in the Shuttle environment. Results are given on the optimization and manufacturing process scale-up of a 3D fiberreinforced foam insulation, BX-251-3D, derived from the Saturn S-4B internal insulation. It is shown that BX-251-3D can be satisfactorily installed in large-scale tanks under conditions that will permit a significant cost saving over the existing S-4B technology.

Lemons, C. R.↗
NASA NTRS1972

Development of techniques and instrumentation for the nondestructive evaluation of multi-layer insulation

The development of techniques and instrumentation suitable for the nondestructive evaluation of purged multilayer insulation prior to and after a shuttle orbiter flight is discussed. These techniques are desirable because of the possibility that corrosion, compression, or tearing of the insulation will degrade the performance of the insulation during subsequent flights. A second objective was the application of the developed technology to the evaluation of other insulation types. Three nondestructive evaluation techniques, electromagnetic, thermal, and acoustic were selected for evaluation. The results of evaluation of each technique are described.

Source record↗
NASA NTRS1972

Development of advanced material composites for use as internal insulation for LH2 tanks (gas layer concept)

A program is described that was conducted to develop an internal insulation system for potential application to the liquid hydrogen tanks of a reusable booster, where the tanks would be subjected to repeated high temperatures. The design of the internal insulation is based on a unique gas layer concept, in which capillary or surface tension effects are used to maintain a stable gas layer, within a cellular core structure, between the tank wall and the contained liquid hydrogen. Specific objectives were to select materials for insulation systems that would be compatible with wall temperatures of 350 F and 650 F during reentry into the earth's atmosphere, and to fabricate and test insulation systems under conditions simulating the operating environment. A materials test program was conducted to evaluate the properties of candidate materials at elevated temperatures and at the temperature of liquid hydrogen, and to determine the compatibility of the materials with a hydrogen atmosphere at the appropriate elevated temperature. The materials that were finally selected included Kapton polyimide films, silicone adhesives, fiber glass batting, and in the case of the 350 F system, Teflon film.

Gille, J. P.↗
NASA NTRS1973

Development of an external ceramic insulation for the space shuttle orbiter. Part 2: Optimization

The basic insulation improvement study concentrated upon evaluating variables which could result in significant near-term gains in mechanical behavior and insulation effectiveness of the baseline system. The approaches undertaken included: evaluation of small diameter fibers, optimization of binder: slurry characteristics, evaluation of techniques for controlling fiber orientation, optimization of firing cycle, and the evaluation of methods for improving insulation efficiency. A detailed discussion of these basic insulation improvement studies is presented.

Tanzilli, R. A.↗
NASA NTRS1975

New insulation attachment method eliminates compatibility bondline stresses

Auger-shaped single-point fastener attaches rigid surface insulation tiles to orbiter shuttle spacecraft. Method can be used to bond wide variety of materials, including insulation, elastomers, and fibrous materials. Since insulation is attached at only one point, insulation and structure are free to form without inducing bond separation.

Schneider, W. C.↗
NASA NTRS1974

Insulation of nonlinear and random vibrations in the mining industry

The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.

Zeveleanu, C.↗
NASA NTRS1974

High reliability sheathed, beryllia insulated, tungsten-rhenium alloy thermocouple assemblies; their fabrication and EMF stability

Tantalum sheathed, BeO insulated, W-3% Re/W-25% Re thermocouple assemblies were fabricated and their emf drift determined during 2059 hours of exposure at 2073 K in a gaseous helium environment. The sheathed thermocouple assemblies were constructed from aged thermoelements, specially heat-treated BeO insulators, and specially cleaned and etched tantalum sheaths. Their thermal emf drifts ranged from the equivalent of only -0.3 to -0.8 K drift per 1000 hours of exposure at 2073 K. No evidence of any gross chemical attack or degradation of the component materials was found. The emf drift and material behavior of some unsheathed, BeO insulated, W-3% Re/W-25% Re thermocouples at 2250 and 2400 K were also determined. Unsheathed thermocouples tested in an argon environment at 2250 K for 1100 hours and at 2400 K for 307 hours exhibited changes in thermal emf that typically ranged from the equivalent of a few degrees K to as much as +11 K. Post-test examinations of these thermocouples revealed some undesirable material degradation and interaction which included erosion of the BeO insulators and contamination of the thermoelements by tantalum from the tantalum blackbody enclosure in which the thermocouples were contained.

Burns, G. W.↗
NASA NTRS1976

Outline and comparison of the possible effects present in a metal-thin-film-insulator-semiconductor solar cell

The advantages possible with the insertion of a thin-film insulating or semi-insulating layer between a metal and a semiconductor to form the MIS photovoltaic device have been presented previously in the literature. This MIS configuration may be considered as a specific example of a more general class of photovoltaic devices: electrode-thin-film-insulator-semiconductor devices. Since the advantages of the configuration were pointed out, there has been considerable experimental interest in these photovoltaic devices. Because the previous analysis showed that the introduction of the insulator layer could produce several different but advantageous effects, this paper presents a further outline giving a comparison of these effects together with their ramifications.

Fonash, S. J.↗