Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INCLUSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Characterization of Oxide + TiN Inclusions in Fe-16 Mass Pct Cr Ferritic Alloy Using Automatic SEM-EDS Analysis

The assessment of automatic SEM-EDS results is significant to reveal the possible inaccuracy of the results and the limitation of this characterization technique in analyzing inclusions. In current research, the oxide + TiN inclusion in Fe-16 mass pct Cr ferritic alloy is characterized by emphasizing the effects of Mg addition and N content on the composition, morphology, homogeneity of dispersion, and size distribution of inclusions; the assessment of automatic SEM-EDS results in rapid analysis concerning its limitation and the utilization of its advantage to clarify the formation mechanism of inclusions are conducted. The nature of inclusions is revealed. Mg addition makes the number density of inclusions larger and the size of inclusions finer. The effect of N content on the size of oxde + TiN was not obvious. Automatic SEM-EDS analysis is deficient in detecting light elements and low content elements in the inclusions and distinguishing between TiN and oxide + TiN. Optimizing the experimental design and combining automatic SEM-EDS results with manual SEM-EDS and optical microscopy results can contribute to delivering accurate and speedy results.

36 MATERIALS SCIENCE↗

Motion and Detachment Behaviors of Liquid Inclusion at Molten Steel–Slag Interfaces

The fundamental physics of particles adsorbed at the liquid interfaces has numerous applications in a wide field. In the current study, the motion and detachment behaviors of the liquid nonmetallic inclusion from molten steel–slag interfaces were theoretically studied by developing a force balance model. According to the model calculations, the thin-film drainage is the main stage of the inclusion separation. The capillary force is the main driving force of the inclusion rebounding at the drainage stage. The effect of triple interface among the steel, slag, and inclusion after the film rupture does not seem to be the main factor for the inclusion detachment. The current model can predict the critical inclusion size of the detachment. The vertical terminal velocities of the inclusion, inclusion size, and slag surface tension are the key factors of the detachment.

36 MATERIALS SCIENCE↗

Effects of particle inclusions on cracking in ultrathin barrier films

Here, the effects of particle inclusions with different mechanical properties on the development of cracks in ultra-thin barrier films have been studied. Two types of particles, alumina and poly(styrene-b-methyl methacrylate) with large differences in their elastic modulus were used, representing both hard and soft inclusions. Particles were seeded onto polyethylene naphthalate substrates and subsequently coated with atomic layer deposited Al 2 O 3 as a barrier film. Ca corrosion tests used to determine the performance of the barrier films revealed that soft polymer particle inclusions severely affect the development of cracking in barrier films as compared to stiff ceramic particles. Tensile tests also confirmed that the barrier films with polymer particle inclusions have the lowest value of critical onset strain. Parametric simulations, conducted by varying the elastic modulus of the particle inclusions over a wide range, resulted in a larger strain energy release rate near particle inclusions which promotes crack formation and negatively impacts the performance of barrier films with softer particle inclusions. Thus, the combination of high residual stresses in the barrier films with the presence of soft particle inclusions is found the most detrimental for the development of high-performance ultrathin barrier films.

36 MATERIALS SCIENCE↗

Methodologies for Reservoir Characterization Using Fluid Inclusion Gas Chemistry

The purpose of this project was to: 1) evaluate the relationship between geothermal fluid processes and the compositions of the fluid inclusion gases trapped in the reservoir rocks; and 2) develop methodologies for interpreting fluid inclusion gas data in terms of the chemical, thermal and hydrological properties of geothermal reservoirs. Phase 1 of this project was designed to conduct the following: 1) model the effects of boiling, condensation, conductive cooling and mixing on selected gaseous species; using fluid compositions obtained from geothermal wells, 2) evaluate, using quantitative analyses provided by New Mexico Tech (NMT), how these processes are recorded by fluid inclusions trapped in individual crystals; and 3) determine if the results obtained on individual crystals can be applied to the bulk fluid inclusion analyses determined by Fluid Inclusion Technology (FIT). Our initial studies however, suggested that numerical modeling of the data would be premature. We observed that the gas compositions, determined on bulk and individual samples were not the same as those discharged by the geothermal wells. Gases discharged from geothermal wells are CO 2 -rich and contain low concentrations of light gases (i.e. H 2 , He, N, Ar, CH4). In contrast many of our samples displayed enrichments in these light gases. Efforts were initiated to evaluate the reasons for the observed gas distributions. As a first step, we examined the potential importance of different reservoir processes using a variety of commonly employed gas ratios (e.g. Giggenbach plots). The second technical target was the development of interpretational methodologies. We have develop methodologies for the interpretation of fluid inclusion gas data, based on the results of Phase 1, geologic interpretation of fluid inclusion data, and integration of the data. These methodologies can be used in conjunction with the relevant geological and hydrological information on the system to create fluid models for the system. The hope is that the methodologies developed will allow bulk fluid inclusion gas analysis to be a useful tool for estimating relative temperatures, identifying the sources and origins of the geothermal fluids, and developing conceptual models that can be used to help target areas of enhanced permeability.

15 GEOTHERMAL ENERGY↗

Transient Behavior and Thermodynamics of Inclusions in Al-Ti-Deoxidized and Ca-Treated Steel

Ti-alloyed steels have severe nozzle clogging problems, which are detrimental to the steel production process. However, little research on the Al-Ti-Ca-O complex inclusion in molten steel has been carried out. Based on that, experiments with different calcium additions were carried out in an Al{sub 2}O{sub 3} crucible at 1873 K to investigate the variation of inclusions in Ti-bearing Al-killed steel in the current article. It was found that calcium treatment significantly influenced the morphology, composition distribution, and size of oxides in Ti-bearing Al-killed steel. Inclusions with a higher CaO or TiO{sub x} content were liquid at 1873 K (1600 °C), indicating that the inclusions in Ti-contained steel can be modified to liquid ones through the proper calcium treatment process. The appropriate amount of calcium should be added to the steel depending upon the aluminum and titanium contents. Thermodynamics of the inclusions in the Al-Ti-Ca-O molten steel system at high temperature and during the solidification process were comprehensively calculated, including all types of inclusions such as calcium oxide, aluminum oxide, titanium oxide, calcium aluminate, calcium titanate, and liquid inclusion. The thermodynamic calculations agree well with the experimental results and can precisely predict the formation of the inclusions in Al-Ti-Ca deoxidized steel.

36 MATERIALS SCIENCE↗

Evolution of Oxide Inclusions in Si-Mn-Killed Steel During Protective Atmosphere Electroslag Remelting

The current study was motivated to reveal the evolution of MnO-SiO{sub 2}-Al{sub 2}O{sub 3} inclusions during protective atmosphere electroslag remelting (P-ESR), and the effect of slag composition on the inclusion evolution. The oxide inclusions in the consumable steel electrode were ternary (7.1-26.4 mass pct) MnO-(53.3-82.8 mass pct) SiO{sub 2}-(8.3-23.1 mass pct) Al{sub 2}O{sub 3} without exception, which were fully removed during the P-ESR in two ways: a portion of these inclusions were dissociated in its individual chemical species into liquid steel, whereas the others were removed by absorbing them into molten slag before liquid metal droplets collected in liquid metal pool during P-ESR. The oxide inclusions both in liquid metal pool and in remelted ingots are mostly MgAl{sub 2}O{sub 4} (containing about 3 mass pct MgO) and Al{sub 2}O{sub 3} inclusions, irrespective of the SiO{sub 2} contents (1.9 to 9.0 mass pct) in the slag. These inclusions readily formed in the liquid metal pool as a result of the reaction between alloying elements and the dissolved oxygen in liquid steel that dissociated from MnO-SiO{sub 2}-Al{sub 2}O{sub 3} inclusions.

36 MATERIALS SCIENCE↗

The speciation of copper in natural fluid inclusions at temperatures up to 700 °C

Copper K-edge X-ray absorption spectra were recorded from natural polyphase brine fluid inclusions in miarolitic quartz from the Omsukchan Granite, Russia, as a function of temperature up to 700 C. The inclusions studied represent two distinct fluids, which contain either 0.02 or 0.94 wt.% Cu homogeneously distributed in solution at temperatures above salt dissolution (350-550 C). X-ray absorption near edge structure (XANES) spectra of the solution phase in the Cu-poor inclusions exhibit an intense edge feature near 8983 eV that is characteristic of the linear [CuCl{sub 2}]{sup -} complex. This spectrum was obtained at all temperatures between 200 and 700 C and from around 15 inclusions. Extended X-ray absorption fine structure (EXAFS) spectra recorded at 550 C were modelled to give a Cu-Cl bond length of 2.11(2) {angstrom}, also consistent with [CuCl{sub 2}]{sup -}. XANES spectra of the Cu-rich inclusions appear similar to that of [CuCl{sub 2}]{sup -} but are shifted to higher energy. This spectrum was obtained between 350 and 700 C and from all three inclusions studied. EXAFS recorded at 700 C gave a Cu-ligand bond length of 2.19(1) {angstrom}. This complex is yet to be identified. The results for the Cu-poor inclusions indicate that [CuCl{sub 2}]{sup -} is stable at magmatic temperatures, extending the known range of this complex by 200 C. This is the first time that Cu speciation has been determined at these temperatures and provides an example of how inclusions can be used as sample cells for the spectroscopic study of fluids at extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of high-Zr inclusions in an alloy containing U, Pu, Np, Am, Zr and rare-earth elements

Researchers commonly observe high-Zr inclusions in actinide-Zr alloys. As there is very little published data on the crystal structures of these inclusions, it has generally been assumed that the inclusions were impurity-stabilized a-Zr. However, new electron-diffraction data from two high-Zr inclusions in an alloy containing U, Pu, Np, Am, Zr, and rare-earth elements show that these inclusions are not a-Zr (which has a hexagonal structure) but instead have a face-centered cubic structure. This data is unique in that it combines single-crystal diffraction patterns and microchemical analyses from individual inclusions. More data on other high-Zr inclusions is clearly required. However, the present results suggest that caution is needed in assuming that all high-Zr inclusions in actinide-Zr alloys are a-Zr.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Relationship between crystallographic structure of the Ti{sub 2}O{sub 3}/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness

A new method based on electron back scattered diffraction (EBSD) is proposed to determine the structure of titanium oxide/MnS complex inclusion which induced the formation of intragranular acicular ferrite (IAF) in heat-affected zone (HAZ) in steel processed by oxide metallurgy route. It was found that the complex inclusion was Ti{sub 2}O{sub 3}/MnS, the orientation relationship between Ti{sub 2}O{sub 3} and MnS was also examined, and the crystallographic orientation relationship among IAF, Ti{sub 2}O{sub 3}/MnS complex inclusion, austenite, bainite formed at lower temperature is researched systematically. It was observed that MnS precipitated on Ti{sub 2}O{sub 3} at specific habit plane and direction and MnS had a specific orientation relationship ((0001) Ti{sub 2}O{sub 3}//(111) MnS), <10–10> Ti{sub 2}O{sub 3}//<110> MnS) with respect to Ti{sub 2}O{sub 3}. Intragranular acicular ferrite (IAF) nucleated on MnS part of the Ti{sub 2}O{sub 3}/MnS complex inclusion had no specific orientation relationship with MnS. IAF and the surrounding bainite had different Bain groups, so that there was an increase in high angle boundaries, which was beneficial for the toughness of HAZ. - Highlights: • The inclusion of TiO{sub x}/MnS that induced IAF formation is identified to be Ti{sub 2}O{sub 3}/MnS. • The inclusion is identified based on electron back scattered diffraction (EBSD). • MnS and Ti{sub 2}O{sub 3} had specific orientation relationship of Ti{sub 2}O{sub 3}/MnS complex inclusion. • The IAFs formed on the same inclusion tend to be in one Bain group. • IAF and the surrounding bainite tend to be in different Bain groups.

36 MATERIALS SCIENCE↗

Predicting the Optical Properties of Matrix Composites Containing Spherical Inclusions with Metal Shells

Individual small particles consisting of an insulating core and a metal shell exhibit more intricate behavior when exposed to electromagnetic radiation than continuous metal particles. A composite medium containing a large number of such particles is therefore bound to have new optical properties. If the inclusions are small relative to the wavelength of electromagnetic radiation, the optical characteristics of an inhomogeneous medium can be estimated from its effective permittivity. On the basis of the generalized effective field approximation, a formula is derived to calculate the effective dielectric characteristics of a matrix composite containing spherical inclusions with shells. The formula can be considered a generalization of the classical Maxwell–Garnett formula for a matrix medium with inhomogeneous inclusions consisting of anisotropic cores and isotropic shells. Using the formula, the frequency dependences of the real and imaginary parts of the effective permittivity in the 0.282–0.855 μm range of wavelengths are calculated for a composite consisting of an α-quartz matrix and spherical nanoinclusions with α-quartz cores and silver shells. The dependences are obtained for different relative volume fractions of cores in the inclusions and of inclusions in the composite. The frequency dependences of the refractive index, the extinction coefficient of the composite, and the transmittance and reflectance of a thin composite film are calculated for the range of wavelengths indicated above. It is shown that inclusions with metal shells in a matrix composite result in an additional plasmon resonance, compared to a composite containing all-metal inclusions. With a matrix composite, the additional plasmon resonance is observed at a wavelength of 0.33–0.34 μm in the ultraviolet range and is much less intense than the principal plasmon resonance. The additional plasmon resonance is responsible for the very low transmittance of a composite film in the ultraviolet region. At a constant volume fraction of inclusions in the composite, an increase in the volume fraction of the cores in them shifts the principal plasmon resonance to longer wavelengths and lowers its intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cumberland Falls chondritic inclusions - Mineralogy/petrology of a forsterite chondrite suite

The mineralogy and petrology of a suite of chondritic inclusions from the Cumberland Falls aubrite are investigated in order to clarify the relation of the inclusions to each other, forsterite chondrites, and the aubrites. Thin sections of nine chondritic inclusions and the achondritic matrix of Cumberland Falls were examined in reflected light, then analyzed for up to 12 elements by electron microprobe techniques. Minerals detected in abundant quantities include low-Ca pyroxene, olivine, plagioclase, kamacite, taenite, schreibersite, troilite, ferroan alabandite and daubreelite; diospide, oldhamite and a Ti-rich sulfide are found in one or two inclusions. The mineralogic compositions indicate similar degrees of reduction for the inclusions in the Cumberland Falls meteorites and in four meteorites identified as forsterite chondrites (Kakangari, Mt. Morris, Pontlyfni and Winona). The inclusions are found to be of a primitive composition, corresponding to petrological types 2 or 3, while the identification of jadeitic pyroxene in nearly all inclusions indicates a substantial degree of shock. The results suggest that the inclusions formed from nebular material that condensed and accreted over a broad redox range, and experienced tertiary shock in a collision with an enstatite meteorite in which the Cumberland Falls meteorite formed.

Neal, C. W.↗

Fluid inclusions in stony meteorites - A cautionary note

Newly discovered fluid inclusions in thin sections of Bjurbole chondrules, shergottite EETA79001, lunar meteorite ALHA81005, and Apollo 16 glasses possess physical properties similar to those of fluid inclusions found in thin sections of five stony meteorites recently described by Warner et al. (1983). The distribution and physical properties of these new fluid inclusions indicate they may be artifacts of thin section preparation; it is suggested that saw coolant was sucked into vacuum vesicles in glasses and minerals through submicroscopic fractures produced during sawing. The similarities between these fluid inclusions and fluid inclusions previously described by Warner et al. (1983) indicate that many of the fluid inclusions reported earlier may be artifacts. Consequently, the origin of any fluid inclusions observed in thin sections of extraterrestrial materials must be interpreted with caution. The most probable true extraterrestrial fluid inclusions are those that have been observed in grains prepared without exposure to liquids of any kind.

Rudnick, R. L.↗

Presolar isotopic and chemical signatures in hibonite-bearing refractory inclusions from the Murchison carbonaceous chondrite

The mineralogy and the major-element composition of phases within individual hibonite-bearing inclusions were determined, using SEM with EDAX analysis, for 37 hibonite-bearing inclusions which comprised 26 spinel-hibonite-perovskite inclusions, ten platy hibonite crystal fragments, and one blue hibonite aggregate. Results from all inclusions studied indicated the presence of correlations in hibonite isotopic systematics and chemistry. Namely, no inclusion had both a large Ti-50 anomaly and radiogenic Mg-26, and inclusions that were depleted in the ultrarefractory elements had radiogenic Mg-26 with the exception of those which a had a large Ti-50 anomaly. These features establish a relationship between chemical and isotopic characteristics of the inclusions which must predate their formation. It is suggested that depletions in ultrarefractory elements observed in these inclusions may be a memory of stellar condensation and are not necessarily related to a condensation event in the solar nebula.

Ireland, Trevor R.↗

Trace element compositions of spinel-rich refractory inclusions from the Murchison meteorite

Three spinel-rich, perovskite-bearing, pyroxene-rimmed, hibonite-free inclusions from the Murchison C2 chondrite have volatility controlled, modified group II REE patterns. Two have high Eu/Yb ratios, two have small positive Ce anomalies and one has high refractory siderophiles for a group II inclusion. Two additional spinel-rich inclusions have subchondritic Ce/La ratios and negative Eu and Yb anomalies, the Eu anomalies being larger than the Yb ones. One of these inclusions is enriched in La relative to all HREE and the other is enriched in HREE relative to all LREE except La, possibly suggesting the presence of an ultrarefractory component in the latter. One hibonite-rich inclusion has a group III REE pattern with a negative Ce anomaly. A calcium dialuminate-bearing inclusion known to have crystallized from a melt at 2100-1800K has a modified group II REE pattern, rather than a pattern which would be predicted from the evaporation expected from such a droplet, e.g., a group III or ultrarefractory pattern. Volatile element contents of these inclusions are among the lowest found in any refractory inclusions.

Yoneda, S.↗

Isotopically distinct reservoirs in the solar nebula: Isotope anomalies in Vigarano meteorite inclusions

The isotopic compositions of Mg, Ca, Ti, Cr, Zn, Sr, Ba, Nd, and Sm were measured in four relatively unaltered refractory inclusions from the Vigarano carbonaceous chondrite meteorite. Three of the inclusions (USNM 1623-2, 1623-3, and 1623-8) show similar Mg, Ca, Ti, and Cr isotopic compositions to those found in most inclusions in the Allende carbonaceous chondrite. This indicates that these Vigarano inclusions sampled the same isotopic reservoirs as the majority of the Allende inclusions that isotope signatures in the latter were not significantly modified by the secondary alteration that permeates most Allende inclusions. In contrast, inclusion 1623-5 has large deficits in Mg-26, Ca-48, and Ti-50 and small but distinct Cr-54, Zn-66, Sr-84, Ba-135, Ba-137, and Sm-144 anomalies. The magnitudes of these unusual anomalies in the refractory elements are within analytical uncertainty of those found in the Allende 'FUN" inclusion C1, yet 1623-5 has a very different bulk chemical composition from C1. The fact that 1623-5 and C1 have identical isotopic anomalies yet have significantly distinct major and trace element contents provide convincing evidence for the presence of isotopically distinct reservoirs in the early solar system.

Loss, R. D.↗

Studies of Magmatic Inclusions in the Basaltic Martian Meteorites Shergotty, Zagami, EETA 79001 and QUE 94201

Currently there are 12 meteorites thought by planetary scientists to be martian samples, delivered to the Earth after violent impacts on that planet's surface. Of these 12 specimens, 4 are basaltic: Shergotty, Zagami, EETA 79001 and QUE 94201. Basalts are particularly important rocks to planetary geologists- they are the most common rocks found on the surfaces of the terrestrial planets, representing volcanic activity of their parent worlds. In addition, because they are generated by partial melting of the mantle and/or lower crust, they can serve as guide posts to the composition and internal processes of a planet. Consequently these four meteorites can serve as 'ground-truth' representatives of the predominant volcanic surface rocks of Mars, and offer researchers a glimpse of the magmatic history of that planet. Unfortunately, unraveling the parentage of a basaltic rock is not always straightforward. While many basalts are simple, unaltered partial melts of the mantle, others have undergone secondary processes which change the original parental chemistry, such as assimilation of other crustal rocks, mixing with other magmas, accumulation, re-equilibration between mineral species after crystallization, loss of late-stage magmatic fluids and alteration by metamorphic or metasomatic processes. Fortunately, magmatic inclusions can trap the evolving magmatic liquid, isolating it from many of these secondary processes and offering a direct look at the magma during different stages of development. These inclusions form when major or minor phases grow skeletally, surrounding small amounts of the parental magma within pockets in the growing crystal. The inclusion as a whole (usually consisting of glass with enclosed crystals) continues to represent the composition of the parental magma at the time the melt pocket closed, even when the rock as a whole evolves under changing conditions. The four basaltic martian meteorites contain several distinct generations of melt inclusions; those found within early-forming pigeonite, intermediate and late-forming Ti, Fe-oxides and sulfides, and intermediate to late-forming phosphates. In this summer' s study we have made a detailed study of all of the various forms of inclusions found within the 4 basaltic martian meteorites listed above. Glasses and minerals within the inclusions were analyzed using the Camera SX-100 Electron Microprobe in Building 31. The mineralogy and textural context of the inclusions will then be used to explore the crystallization history of these specimens, and to investigate any differences in crystallization history or parental magma compositions between these rocks. In this manner, the magmatic inclusions provide a road map backwards toward the 'parental' compositions for the basaltic martian meteorites and provide significant insight into the igneous processes found within the crust of Mars.

Harvey, Ralph P.↗

Organization of P, S, and Fe Inclusions in a Freshwater Magnetococcus

Magnetotactic bacteria are a heterogeneous group of motile, mainly aquatic procaryotes that align and swim along geomagnetic field lines. They are of interest to astrobiologists because of the magnetite crystals found in the Mars meteorite ALH84001 which share many characteristics with the magnetite produced intracellularly by magnetotactic bacteria. These bacteria are diverse morphologically, physiologically and phylogenetically, sharing a few key characteristics: 1) the presence of intracellular membrane-bound magnetic crystals (magnetosomes), usually but not always arranged in chains; 2) motility by means of flagella; and 3) microaerophillic or anaerobic physiology. The bilophotrichous (having two flagella bundles) magnetotactic cocci (MC) are ubiquitous in aquatic habitats but have proven extremely difficult to cultivate. Because only several marine strains have been isolated and grown in axenic culture, little is known about the physiology and the biogeochemical roles of the MC. We studied the composition and distribution of intracellular structures in an uncultured MC, designated ARB-1. To do this, a combination of light microscopy, environmental scanning electron microscopy (ESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) were used. Cells of ARB-1 were separated from sediments collected from Baldwin Lake (Los Angeles Arboretum, Arcadia, CA). They are large spherical to oblate spheroidal Gram-negative cells, ranging from 1 to 4 micrometers along the maximum dimension, which is perpendicular to the direction of swimming. Cells have two large phosphorus-containing inclusions that comprise a large percentage of the cell volume. Many smaller sulfur inclusions are located at the convex end of the cell. Most of the cellular Fe is present in the magnetosomes. These may be arranged as a clump at the concave end of the cell, near the two flagella bundles, or as chains, or as both a clump and chains. The magnetosomes were identified as magnetite (Fe3O4) by selected area electron diffraction (SAED) and high resolution TEM. We saw a trend between cell size and organization of the magnetosomes. Smaller, more spherical cells were more likely to have chains than were larger, more oblate cells. This may indicate different populations of cells, or it may be attributed to variations in cell growth cycle. The size distribution (length) of magnetosomes in chains was similar to that of magnetosomes in clusters, except that there was a larger size range for clustered magnetosomes. Magnetosomes from ARB-1 cells average 82 nm in length. If plotted on a graph of length as a function of aspect ratio, they fall within the single domain region of the plot. If compared with the size distributions of magnetite from ALH84001 and magnetosomes from the cultured magnetotactic vibrio MV-1, the magnetites produced by ARB-1 cells are, on average, larger and have a wider range of aspect ratio. ARB-1 cells have a specific organization of the P, S, and Fe inclusions. The P inclusions always occupy the majority of the cell volume and separate the S inclusions from the disorganized clumps of magnetosomes and the flagella bundles. The P inclusions may contain polyphosphate, which could play several roles in motility, adaptation to stress, growth and division, buoyancy, and energy. The S inclusions might be a way to store S, a potential energy source, when the cells move from sulfide to oxygen zones. The consistency of P, S, and Fe organization in ARB-1 cells suggests that these inclusions have some specific and interactive functions.

Cox, Lea↗

Geometric Modeling of Inclusions as Ellipsoids

Nonmetallic inclusions in gas turbine disk alloys can have a significant detrimental impact on fatigue life. Because large inclusions that lead to anomalously low lives occur infrequently, probabilistic approaches can be utilized to avoid the excessively conservative assumption of lifing to a large inclusion in a high stress location. A prerequisite to modeling the impact of inclusions on the fatigue life distribution is a characterization of the inclusion occurrence rate and size distribution. To help facilitate this process, a geometric simulation of the inclusions was devised. To make the simulation problem tractable, the irregularly sized and shaped inclusions were modeled as arbitrarily oriented, three independent dimensioned, ellipsoids. Random orientation of the ellipsoid is accomplished through a series of three orthogonal rotations of axes. In this report, a set of mathematical models for the following parameters are described: the intercepted area of a randomly sectioned ellipsoid, the dimensions and orientation of the intercepted ellipse, the area of a randomly oriented sectioned ellipse, the depth and width of a randomly oriented sectioned ellipse, and the projected area of a randomly oriented ellipsoid. These parameters are necessary to determine an inclusion s potential to develop a propagating fatigue crack. Without these mathematical models, computationally expensive search algorithms would be required to compute these parameters.

Bonacuse, Peter J.↗