Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ILs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Super p-sulfur cathodes for quasi-solid-state lithium-sulfur-batteries

Lithium-Sulfur (Li-S) batteries have become a promising candidate to meet the current energy storage demand, with its natural abundance of materials, high theoretical capacity of 1672 mAhg-1, high energy density of 2600 Whkg-1, low cost and lower environmental impact. Sulfide based solid state electrolytes (SSEs) have received greater attention due to their higher ionic conductivity, compatible interface with sulfur-based cathodes, and lower grain boundary resistance. However, the interface between SSEs and cathodes has become a challenge in all solid-state Li-S batteries due to the rigidity of the participating surfaces. A hybrid electrolyte containing SSE coupled with a small amount of ionic liquid, was essential to improve the interface contact of the SSE with the electrodes. Coating-based cathodes were successfully fabricated using water-based carboxymethyl cellulose (CMC) solution and Styrene butadiene rubber (SBR) as the binder with low sulfur loading (0.70 mgcm-2) as well as high sulfur loading (4.0 mgcm-2). Solid-state composite powder-based cathodes pressed onto SSE (loading 4.0 mgcm-2) with enhanced electronic and ionic conductivity were fabricated with Super P: Sulfur (SP:S) and SSE. Ionic Liquids (IL) prepared using Lithium bis(trifluoromethyl sulfonyl)imide (LiTFSI) as salt, with premixed pyrrolidinium bis(trifluoromethyl sulfonyl)imide (PYR) as solvent and 1,3-dioxolane (DOL) as diluent were used to wet both SSE-electrode interfaces. The effect of IL dilution, co-solvent amount, LiTFSI concentration, C rate at which the batteries are tested and the effect of SSE inside the cathode, were systematically studied and optimized to develop a quasi-solid-state electrolyte Li-S battery (QSSLSB) with higher capacity retention and cyclability. LiTFSI (2M) dissolved in PYR:DOL(1:1) found to be optimum IL combination for low sulfur loading QSSLSBs reaching 500 mAh/g after 100 cycles while LiTFSI (3M) in PYR:DOL(1:3) was the optimum IL concentration for higher loading QSSLSBs reaching 400 mAh/g after 100 cycles. This work reports promising results of QSSLSB based on novel Li6PS5F0.5Cl0.5 Li-argyrodite solid-state electrolyte (SSE) with minute amount of IL, Super P-Sulfur (SP:S) cathode, and Li-anode. It also offers a new insight into the intimate interfacial contacts between the SSE and carbon-sulfur cathodes, which will be critical for improved electrochemical performance of quasi-solid-state lithium-sulfur batteries with high sulfur loading in the future.

25 ENERGY STORAGE↗
DOE OSTI2021

Synchrotron fluorescence imaging of individual mouse beta-cells reveals changes in zinc, calcium, and iron in a model of low-grade inflammation

Pancreatic beta-cells synthesize and secrete insulin maintaining an organism's energy homeostasis. In humans, beta-cell dysfunction and death contribute to the pathogenesis of type 2 diabetes (T2D). Although the causes of beta-cell dysfunction are complex, obesity-induced low-grade systemic inflammation plays a role. For example, obese individuals exhibiting increased levels of proinflammatory cytokines IL-6 and IL-1beta have a higher risk of beta-cell dysfunction and T2D. Interestingly, obesity-induced inflammation changes the expression of several cellular metal regulating genes, prompting this study to examine changes in the beta-cell metallome after exposure to proinflammatory-cytokines. Here, primary mouse beta-cells were exposed to a combination of IL-6 and IL-1beta for 48 hours, were chemically fixed and imaged by synchrotron X-ray fluorescent microscopy. Quantitative analysis showed a surprising 2.4-fold decrease in the mean total cellular content of zinc from 158 ± 57.7 femtograms (fg) to 65.7 ± 29.7 fg; calcium decreased from 216 ± 67.4 to 154.3 ± 68.7 fg (control vs. cytokines, respectively). The mean total cellular iron content slightly increased from 30.4 ± 12.2 to 47.2 ± 36.4 fg after cytokine treatment; a sub-population of cells (38%) exhibited larger increases of iron density. Changes in the subcellular distributions of zinc and calcium were observed after cytokine exposure. Beta-cells contained numerous iron puncta that accumulated still more iron after exposure to cytokines. These findings provide evidence that exposure to low levels of cytokines is sufficient to cause changes in the total cellular content and/or subcellular distribution of several metals known to be critical for normal beta-cell function.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Evidence for a cytokine-sensitive network of iron-associated genes that protects pancreatic islets against ferroptosis

Background/Objectives: The micronutrient iron is closely connected to inflammation and is among the complex factors contributing to beta-cell failure in diabetes. High levels of dietary iron increase the risk of developing type 2 diabetes, and excessive iron uptake by beta-cells can cause oxidative stress and inhibit function. Elevated levels of proinflammatory cytokines in obese individuals, such as interleukin (IL)-1beta and IL-6, increase the risk of developing type 2 diabetes, and there is evidence that these low levels of circulating cytokines can lead to islet dysfunction. Methods: In this study, gene microarray and other data were analyzed for expression differences in islets treated for 48 h with 10 pg/mL IL-1beta + 20 pg/mL IL-6 as a model of low-grade inflammation versus untreated. Results: Three iron-associated genes were among the most cytokine-sensitive in the mouse genome: Hamp, Steap4, and Lcn2. These proteins are all involved with increasing/retaining cellular iron. We hypothesized that increased cellular iron would lead to increased susceptibility to ferroptosis. Surprisingly, 24 h pre-exposure to low-grade inflammation, which upregulates this iron-gene network, prevented subsequent erastin-induced ferroptosis. We also found that Steap4 overexpression reduced islet dysfunction caused by high-dose proinflammatory cytokines (10× low-dose), suggesting an overall protective effect. Steap4 overexpression also upregulated Hamp and Lcn2, suggesting Steap4 regulates these cytokine-sensitive iron genes.; in contrast, ferritin and ferroportin gene expression, which are not sensitive to cytokines, were unchanged. Conclusions: These data suggest an inflammation-induced network of genes involved in cellular iron uptake and retention plays a protective role in islets against oxidative stress and ferroptosis.

IL-1β↗
DOE OSTI2025

Data for Identifying the best high-biomass sorghum hybrids based on biomass yield potential and feedstock quality affected by nitrogen fertility management under various environments

Data were collected from agronomy fields in Urbana and Ewing, IL, during the 2022 and 2023 growing seasons. The dataset includes dry biomass yield, nitrogen, phosphorus, and potassium concentrations and removals, and chemical composition elements (cellulose, hemicellulose, lignin, and soluble fractions) for 13 high-biomass sorghum hybrids. data_sharing.xlsx contains 20 columns and 104 rows. Below is the explanation of all variables in the file: Year: 2022; 2023 Location: Urbana, IL; Ewing, IL N rate (kg-N/ha): 0; 112 Hybrid #: H1-H13 Pedigree: Pedigree for 13 hybrids Dry biomass yield (Mg/ha): Aboveground dry biomass yield N (g/kg): Nitrogen concentration in plant tissue P (g/kg): Phosphorus concentration in plant tissue K (g/kg): Potassium concentration in plant tissue N (kg/ha): Nitrogen removal by aboveground biomass P (kg/ha): Phosphorus removal by aboveground biomass K (kg/ha): Potassium removal by aboveground biomass Cellulose (g/kg): Cellulose concentration in plant tissue Hemicellulose (g/kg): Hemicellulose concentration in plant tissue Lignin (g/kg): Lignin concentration in plant tissue Soluble (g/kg): Soluble concentration in plant tissue Cellulose (Mg/ha): Cellulose content in aboveground biomass Hemicellulose (Mg/ha): Hemicellulose content in aboveground biomass Lignin (Mg/ha): Lignin content in aboveground biomass Soluble (Mg/ha): Soluble content in aboveground biomass

environmental adaptability↗
DOE OSTI2025

Crystallization of nanopore-confined imidazolium ionic liquids probed by temperature-resolved in situ grazing-incidence wide angle X-ray scattering (GIWAXS)

The crystallization behavior of ionic liquids (ILs) 1-butyl-3-methylimidazolium [BMIM] hexafluorophosphate [PF 6 ] and chloride [Cl] is investigated upon confinement in 2.3 or 8.2 nm diameter silica nanopore arrays, along with the effects of covalently modifying the pore walls with 1-(3-trimethoxysilylpropyl)3-methylimidazolium [TMS-MIM] + groups. In situ grazing-incidence wide angle x-ray scattering (GIWAXS) is performed during heating from as low as -110 °C to room temperature. Partially ordered “nanodomains” are observed in both ILs in the bulk molten state, but they are disrupted by nanoconfinement. Melting point depression consistent with capillary effects is observed for [BMIM][PF 6 ] in 2.3 nm pores. However, the melting point is elevated for [BMIM][PF 6 ] in 8.2 nm pores, which provide sufficient space to stabilize the crystalline phase. For [BMIM][Cl], crystallization is observed only in 8.2 nm bare silica pores, but the melting point is severely depressed. Tethering with IL-like [TMS-MIM + ] also promotes the crystallization of [BMIM][PF 6 ], resulting in elevated melting points. The combined effects of a larger pore size and pore surface tethering on [BMIM][PF 6 ] result in a single stable crystal phase that persists from -140 °C to 25 °C (vs. the bulk melting point of -11 °C). These results show that when ILs are used in confined systems, complex crystallization behavior can emerge depending on the counterion, pore size, and surface modification that require consideration of ion layering in the confined space in addition to surface free energy effects.

He, Yuxin [University of Kentucky, Lexington, KY (↗
DOE OSTI2026

Effect of Oil Viscosity and Impact of Ionic Liquid Additive on Electrically Induced Pitting in Rolling Contact

Electrically induced bearing damage (EIBD) is a growing concern in electric drivetrains, where electrical discharge currents generate localized pitting that accelerates wear and premature failure. While ionic liquids (ILs) have shown promise as lubricant additives due to their natural physical adsorption, strong capabilities of tribofilm formation, and high molecular tunability, their role in mitigating EIBD is little known. This gap is especially evident because lubricant viscosity and film thickness affect discharge behavior, and additive performance in these regimes has not been well explored. In this study, tribological tests were performed using a ball-on-disk pure rolling-contact system under an applied voltage on polyalphaolefin oils of three viscosities (4, 10, and 150 cSt measured at 100 °C), with and without the addition of a phosphonium-phosphate IL. Surface damage was analyzed using scanning electron microscopy (SEM) and stylus profilometry. Damage quantification was based on pit morphology analysis of SEM images. The results provide new insights into how oil viscosity governs the discharge behavior and how an IL additive could influence the pit formation. While viscosity seems to play a significant role, an IL additive shows potential to reduce EIBD and deserves further study.

electrically induced bearing damage (EIBD)↗
DOE OSTI2024

Tailoring the Gating Effect of Organic Cage via a Porous Liquid Approach

Porous liquids (PLs) represent a new frontier in material design combining the merits of solid porous host and liquid phase in gas separation and catalysis. Herein, the PL construction approach is harnessed to tailor the gating effect of organic cages toward enhanced gas separation. A type-II fluorinated PL (F-PL) is developed via liquifying a fluorinated organic cage (F-cage) by a fluorinated ionic liquid (F-IL). The F-cage is featured by a small window size (≈5.1 Å), high surface area, good stability under highly ionic conditions, and abundant fluorine moieties. The F-IL possesses high steric hindrance (bulky cation) and structure similarity with the F-cage (fluorinated alkyl chain in the anion). The existing status structure integrity of F-cage in F-IL upon F-PL formation is illustrated via spectroscopy and X-ray-based techniques. The existence of rigid voids in F-PL is illustrated by positron annihilation lifetime spectroscopy (PALS) and the improved gas uptake capacity than F-IL via pressure-swing CO 2 uptake isotherms (0–40) bar. Further, the comparison of the gas uptake behavior (CO 2 , N 2 , CH 4 , and Xe) of F-PL and F-cage, combining the computational simulation, highlights that the PL construction can be leveraged to tune the window size of porous scaffolds, leading to enhanced gas selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Metal Organic Framework Derived Solid Electrolyte for Lithium–Sulfur Batteries

Lithium–sulfur batteries (LSBs) are currently considered as promising candidates for next-generation energy storage technologies. However, their practical application is hindered by the critical issue of the polysulfide-shuttle. Herein, a metal organic framework (MOF)-derived solid electrolyte is presented to address it. The MOF solid electrolyte is developed based on a Universitetet i Oslo (UIO) structure. By grafting a lithium sulfonate (-SO 3 Li) group to the UIO ligand, both the ionic conductivity and the polysulfide-suppression capability of the resulting -SO 3 Li grafted UIO (UIOSLi) solid electrolyte are greatly improved. After integrating a Li-based ionic liquid (Li-IL), lithium bis(trifluoromethanesulfonyl)imide in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, the resulting Li-IL/UIOSLi solid electrolyte exhibits an ionic conductivity of 3.3 × 10 -4 S cm -1 at room temperature. Based on its unique structure, the Li-IL/UIOSLi solid electrolyte effectively restrains the polysulfide shuttle and suppresses lithium dendritic growth. Lithium–sulfur cells with the Li-IL/UIOSLi solid electrolyte and a Li 2 S 6 catholyte show stable cycling performance that preserves 84% of the initial capacity after 250 cycles with a capacity-fade rate of 0.06% per cycle.

25 ENERGY STORAGE↗
DOE OSTI2021

Ready Access to Anhydrous Anionic Lanthanide Acetates by Using Imidazolium Acetate Ionic Liquids as the Reaction Medium

Abstract Access to lanthanide acetate coordination compounds is challenged by the tendency of lanthanides to coordinate water and the plethora of acetate coordination modes. A straightforward, reproducible synthetic procedure by treating lanthanide chloride hydrates with defined ratios of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium acetate ([C 2 mim][OAc]) has been developed. This reaction pathway leads to two isostructural crystalline anhydrous coordination complexes, the polymeric [C 2 mim] n [{Ln 2 (OAc) 7 } n ] and the dimeric [C 2 mim] 2 [Ln 2 (OAc) 8 ], based on the ion size and the ratio of IL used. A reaction with an IL : Ln‐salt ratio of 5 : 1, where Ln=Nd, Sm, and Gd, led exclusively to the polymer, whilst for the heaviest lanthanides (Dy−Lu) the dimer was observed. Reaction with Eu and Tb resulted in a mixture of both polymeric and dimeric forms. When the amount of IL and/or the size of the cation was increased, the reaction led to only the dimeric compound for all the lanthanide series. Crystallographic analyses of the resulting salts revealed three different types of metal‐acetate coordination modes where η 2 μκ 2 is the most represented in both structure types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Genotype-Environment-Management Interactions in Biomass Yield and Feedstock Composition of Photoperiod-Sensitive Energy Sorghum

Recently introduced photoperiod-sensitive (PS) biomass sorghum (Sorghum bicolor L. Moench) needs to be investigated for their yield potential under different cultivation environments with reasonable nitrogen (N) inputs. The objectives of this study were to (1) evaluate the biomass yield and feedstock quality of four sorghum hybrids with different levels of PS ranging from very PS (VPS) hybrids and to moderate PS (MPS) hybrids, and (2) determine the optimal N inputs (0~168 kg N ha -1 ) under four environments: combinations of both temperate (Urbana, IL) and subtropical (College Station, TX) regions during 2018 and 2019. Compared to TX, the PS sorghums in central IL showed higher yield potential and steady feedstock production with an extended day length and with less precipitation variability, especially for the VPS hybrids. The mean dry matter (DM) yields of VPS hybrids were 20.5 Mg DM ha -1 and 17.7 Mg DM ha -1 in IL and TX, respectively. The highest N use efficiency occurred at a low N rate of 56 kg N ha -1 by improving approximately 33 kg DM ha -1 per 1.0 kg N ha -1 input. Approximately 70% of the PS sorghum biomass can be utilized for biofuel production, consisting of 58-65% of the cell-wall components and 4-11% of the soluble sugar. Finally, this study demonstrated that the rainfed temperate area (e.g., IL) has a great potential for the sustainable cultivation of PS energy sorghum due to their observed high yield potential, stable production, and low N requirements.

09 BIOMASS FUELS↗
DOE OSTI2021

Understanding Gas Absorption in Multivalent Ionic Liquids via Solute-Solvent Interaction Analyses

Solute-solvent interactions are often evaluated to understand and explain gas solubilities. This information is regularly used to interpret gas solubility and separation within ionic liquids (ILs). Here, we use several different quantum chemical and previous molecular dynamics simulation results to show that strong solute-solvent interactions neither lead to high solubility nor to high selectivity, with respect to other solutes. Instead, the solute-solvent interaction strength with different isolated IL ions is affected by the electrostatic extremes. Also, the solute-solvent interaction with different IL molecules is strongly correlated to the molecular volumes or polarizabilities (within a series of same-anion based ILs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unraveling the individual influences of supports and ionic liquid coatings on the catalytic properties of supported iridium complexes and iridium clusters

In this work, supported iridium complexes were synthesized by the reaction of Ir(CO) 2 (acac) (acac = acetylacetonato) with SiO 2 , γ-Al 2 O 3 , and MgO. Extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectra demonstrate that the iridium was present as atomically dispersed species anchored to each support. The samples were treated in flowing H 2 at 673 K to form supported iridium clusters. EXAFS spectra and high-angle annular dark-field scanning transmission electron microscopy images demonstrate that the average diameter of the iridium clusters on each support was approximately 1.2 nm. Furthermore, the catalysts before and after cluster formation were coated with each of a family of 1,3-dialkylimidazolium ionic liquids (ILs) having varying electron-donor tendencies probed by their υ(C2H) frequencies determined by IR spectroscopy. The coated and uncoated samples were tested as catalysts for partial hydrogenation of 1,3-butadiene in a flow reactor at 333 K, with turnover frequencies determined from differential conversions. The individual influences of the IL coatings and supports on the catalyst performance were found to depend strongly on whether the iridium was site-isolated complexes or present in clusters. The IL coatings as ligands exerted dominant effects on the clusters as catalysts, whereas the supports exerted dominant effects on the isolated iridium atoms. The results indicate how to tune the effects of metal nuclearity, IL coatings, and supports on the electronic environments and catalytic properties of the metals.

1,3-Butadiene hydrogenation↗
DOE OSTI2024

Rheology characterization of ionic liquids under high pressure and high temperature

Ionic liquids (ILs) are liquid salts that exist at or below ambient temperatures and are composed of ion pairs. They offer promising alternatives to toxic, hazardous, highly flammable, and volatile solvents in various applications such as solution preparation, dispersion, gel formation, composites, and polymer melts. ILs possess unique and interesting characteristics, including excellent chemical and thermal stability and low vapor pressures. Understanding the rheological properties of ILs is essential to optimizing IL performance. This paper presents a comparative analysis of the rheological properties of two ionic liquids, Nsingle bondHexylpyridinium tetrafluoroborate (HPyBF4) and Nsingle bondHexylpyridinium bromide (HPyBr), under different shear rates, temperatures, and pressures. Rheological measurements were performed under varying controlled pressure and temperature conditions. The experimental investigation covered a pressure range of 689–12,411 kPa [100–1800 psi] and a temperature range from room temperature up to 522 kelvin (K) [480°F]. The primary objective is to explore and compare the flow behavior and viscoelastic characteristics of HPyBF4 and HPyBr under high-pressure and high-temperature conditions. The experimental data showed that HPyBF4 and HPyBr exhibited shear-thinning behavior, and pressure had an insignificant effect on rheology compared to the temperature effect. Under the same testing conditions, HPyBr showed higher shear stress and viscosity than HPyBF4. This research significantly contributes to the improved understanding of the rheological behavior of these specific ionic liquids and their suitability for diverse industrial and scientific applications, particularly in high-pressure and high-temperature environments.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Heat generation in electric double layer capacitors with neat and diluted ionic liquid electrolytes under large potential window between 5 and 80 °C

Here, this study investigates the effect of temperature on the heat generation and the associated electrochemical phenomena occurring in IL-based EDLCs. The EDLCs consisted of two identical activated carbon electrodes with neat Pyr14TFSI or Pyr14TFSI diluted in propylene carbonate (PC) as electrolytes. The instantaneous heat generation rate at each electrode was measured by isothermal calorimetry between 5 and 80 °C under constant current cycling and potential window of 2.5 V. First, the instantaneous heat generation rate was similar at each electrode in neat IL. However, it was smaller at the negative electrode in diluted IL and featured endothermic dips growing with increasing temperature > 40 °C due to overscreening effects, ion desolvation, and/or decomposition of PC. The irreversible heat generation was similar in each half-cell and decreased with increasing temperature due to the reduction in internal resistance, particularly with neat IL. The irreversible heat generation exceeded Joule heating in all cases, especially at high temperature and low current. This was attributed to ion desorption and charge redistribution in the porous electrodes. Finally, the reversible heat generation for both electrolytes was larger at the positive than at the negative electrode due to the difference in anion and cation sizes.

25 ENERGY STORAGE↗
DOE OSTI2020

Ion-gated carbon molecular sieve gas separation membranes

Membrane technology lies at the heart of many industrial gas separation processes and applications. Molecular sieving membranes that break the Robeson limit are desirable for energy-efficient gas separation. In this paper, we report a facile strategy of directly integrating ionic liquids (ILs) into porous membranes. Particularly, the ILs form an ultra-thin layer on the carbon molecular sieve (CMS) membranes rather than penetrating into the pores, acting as a smart gate for gas entry to boost the selectivity. The hybrid membrane exhibits CO 2 permeability >600 barrer and enhanced CO 2 /N 2 selectivity >50, which surpasses the Robeson limit and shows potential in CO 2 /N 2 separation process. Molecular dynamics simulations confirm the gating effect of the IL layer of molecular thickness. In conclusion, this work demonstrates a universal strategy to improve CMS membrane performance by creating an IL-membrane interface and tuning the ion-pore interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrochemical, thermodynamic, and physical properties of tetradecyltrihexylphosphonium ([P 6,6, 6,14 ] + ) and methyl-propyl piperidinium containing ionic liquids and their propylene carbonate solutions

Here, the viscosity, conductivity, electrochemical window and related thermodynamic properties such as excess volume and dynamic viscosity deviation of two phosphonium ionic liquids were measured and calculated for “as-supplied” and dried neat liquids and also v/v mixtures of 99/1, 95/5, 90/10, 75/25, and 50/50 of the ionic liquids with propylene carbonate (PC). Tetradecyltrihexylphosphonium dicyanamide ([P 6,6,6,14 ] + dicyanamide), Cyphos 105, and tetradecyltrihexylphosphonium bis(trifluororomethanesulfonyl)imide (called bistriflimide) ([P 6,6,6,14 ] + bistriflimide), Cyphos 109, ionic liquids were studied. Generally speaking, there were slight differences in the measured properties of the wet and dried IL solutions which were reflected in differences if the calculated properties. The measured and calculated properties were compared with those collected and derived from a piperidinium-based ionic liquid, methyl-propyl piperidinium bistriflimide. Arrhenius plots for both the viscosity and conductivity were linear, with the linearity of the Litovitz plots being slightly higher. The viscosity and conductivity of the phosphonium solutions yielded Walden Plots that differed from Walden plots of piperidinium solutions and other ionic liquid solutions. For the phosphonium based ionic liquids, the ionicity was found to increase with increasing dilution in propylene carbonate. The electrochemical windows of the ionic liquids were determined as a function of the concentration of the ionic liquid present in the solution. The size of the window generally initially decreased and then increased with the addition of PC for the [P 6,6,6,14 ] + dicyanamide ionic liquid increasing from 3.4 V in the 95/5 v/v (volume Cyphos 105) to volume of PC solvent) to 3.7 in the 50/50 dried IL case. The electrochemical windows of the dried liquids were slightly larger 3.5 V for the 95/5 v/v and 4.2 V for the 50/50 v/v Cyphos 105/PC solutions. The electrochemical window was larger and the conductivity was higher for the piperidinium IL solutions, but since the ionicity increases with dilution, the phosphonium based IL solutions may prove favorable for processes such as electrochemical reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oil miscible phosphonium-phosphate ionic liquid as novel antiwear and antipitting additive for low-viscosity rear axle lubricants

Here we explored the feasibility of using a phosphonium phosphate ionic liquid as a candidate anti-wear and anti-pitting additive for rear axle lubricant. This particular IL was first added to a VHVI8 base oil at 2–3% concentration and demonstrated effective surface protection for wear and micro-cracking under rolling-sliding contacts. The promising results directed to a step further to produce a series of IL-containing low-viscosity (about a half of SAE 75W-90) fully formulated gear oils. Selected IL-containing experimental oils showed superior mitigation of rolling contact fatigue to a commercial SAE 75W-90 gear oil in bench-scale rolling-sliding tests. Full-scale hub dynamometer tests were then conducted and demonstrated more than 3% power output and torque generation for an IL-containing low-viscosity gear oil benchmarked against commercial baselines.

36 MATERIALS SCIENCE↗
DOE OSTI2021

TRIM27-mediated ubiquitination of PPARγ promotes glutamate-induced cell apoptosis and inflammation

Neurotoxicity induced by glutamate (Glu) is often used to study the signaling mechanism of neurological disorders. The identification of specific genetic factors that cause Glu-induced neurotoxicity provides evidence for the common pathways of neuronal apoptosis and inflammation. TRIM27 has been found to induce apoptosis and inflammation. Nevertheless, there is little evidence that TRIM27 is associated with Glu-induced neurotoxicity. We found that TRIM27 expression was increased in epilepsy patients and in HT22 cells following Glu treatment. Glu-mediated cell apoptosis, decreased PPARγ expression, and increased levels of cleaved Caspase-3 and IL-1β expression in HT22 cells were significantly inhibited by TRIM27 knockdown. TRIM27 overexpression significantly induced cell apoptosis and expression of cleaved Caspase-3 and IL-1β, but inhibited PPARγ expression in HT22 cells, which were reversed by ROZ, suggesting the involvement of PPARγ in TRIM27-mediated cell apoptosis and inflammation in HT22 cells. Mechanically, TRIM27 ubiquitinates and degrades PPARγ, following induces cleaved Caspase-3 and IL-1β expression. Clinically, increased expression of TRIM27 in epilepsy patients was associated with decreased PPARγ expression. Taken together, our study suggests that TRIM27-mediated ubiquitination of PPARγ promotes Glu-induced HT22 cell apoptosis and IL-1β release.

60 APPLIED LIFE SCIENCES↗