Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High spatial resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Rapid retrieval of first-order spatiotemporal distortions for ultrashort laser pulses

High-intensity, ultrashort laser sources are a foundational pillar for High-Energy-Density (HED) physics, and as the repetition-rates of these systems increase, diagnostics must be developed to match their data collection speed. Characterization of any spatiotemporal distortions in the laser pulse is necessary in order to standardize results across facilities. Here, we have previously developed a laser diagnostic called Spatially and Temporally Resolved Intensity and Phase Evaluation Device: Full Information from a Single Hologram, or STRIPED FISH, to measure the full spatiotemporal laser electric field on a single shot. In order to provide rapid feedback, we here adapt the STRIPED FISH retrieval algorithm, which typically has computation times of up to 30 minutes due to the high spatial resolution of the device and its retrieval of the complete four-dimensional pulse field, to distill the key electric field quantities into a handful of scalars for rapid assessment of the pulse's first order distortions. Here, our new, rapid non-iterative retrieval algorithm is validated with simulated and experimental data, and it provides, within seconds, the same first-order information as given by the full analysis. This algorithm is suitable for on-shot assessment of spatiotemporal distortions and can be adapted to assess high repetition-rate laser quality in HED experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Scalable Generation of High-fidelity Synthetic Population Ensembles

Used within social simulations, synthetic population ensembles enable uncertainty quantification (UQ) methods for obtaining more robust model inference and prediction. A synthetic population ensemble is a series of plausible virtual reconstructions of an area’s population at the granularity of people and residences, generated stochastically to preserve privacy of the source population survey’s respondents. In this paper, we demonstrate the production of large synthetic population ensembles for the U.S. via Oak Ridge National Laboratory’s UrbanPop framework to support modeling of high spatial resolution energy affordability metrics from nationwide social surveys in collaboration with the fusionACS project. The study involves two scenarios: creating ensembles for (1) 17 U.S. metropolitan areas in 2019 and (2) full U.S. Census Divisions in 2023, with each scenario consisting of 41 population instances (a base realization and 40 replicates). To accomplish this task at scale, we configured an integrated system within a research cloud, comprised of virtual containerizations, GPU-enhanced functionality, and orchestrated deployments of UrbanPop’s maturing Likeness Python ecosystem. Results demonstrate we maintained high-fidelity approximations of residential totals by areas of interest and the demographic characteristics of neighborhoods while reducing manual workflow burdens. Finally, we discuss plans to fine-tune and further develop our automated workflows for truly distributed job orchestration to increase computational efficiency, as well as provide an outlook for broadening applications of the ensembles.

Cluster computing↗
DOE OSTI2022

Full-scale Demonstration of Multi-process Sensor at a Cycling PC-fired Boiler

The main objective of this research program is to design, manufacture, and demonstrate a miniaturized, multi-process, monitoring system (mMPMS) for boiler condition management and easy system deployment to obtain a higher spatial resolution. This system will facilitate a Condition-Based Maintenance (CBM) philosophy that actively monitors the health of assets to predict and prevent failures and maximize availability and generating capacity at a reduced cost. CBM systems can provide boiler data that the advanced process control (APC) system can utilize for plant performance optimization, which is increasingly relevant as coal power plants shift from predominantly base-load operation to predominantly transient operation involving large load swings. The mMPMS is based on an electrochemical sensor that provides a real-time indication of the risk of damage to key locations in the radiant or convective section of a coal-fired boiler such as metal loss rates, heat flux, metal surface temperature, and deposit thickness. These indications can be utilized to optimize boiler performance as well as improve boiler availability in conjunction with corresponding operating conditions. This monitoring system was developed and tested in the high-temperature regions of coal-fired utility boilers in this project but can be applied to many other industries and applications as well. This project leveraged the existing electrochemical noise-based monitoring system and the new sensor design is small enough to be installed through the webbing of the waterwalls without the need for long shut-downs to bend tubes and to make it feasible to obtain high spatial resolution in the boiler. Data is transferred to the plant distributed control system (DCS) and any other control system. The sensor body that houses the sensor assembly was designed to ensure good conductive contact with boiler tubes to ensure the sensor is held at an identical temperature to the tube surface temperature. The data acquisition and signal conditioning modules were redesigned into a small footprint with optimized cooling of the module. System software was developed specifically for the new signal conditioning module and is compatible with plant PLCs. After the preliminary testing at a pilot-scale facility, the three mMPMS were installed at a full-scale pulverized coal-fired plant, PacifiCorp’s Hunter 3. The systems were demonstrated over 20,000 hours at the plant during regular operation. Also, the sensor data was fed to the plant’s advanced process control system to evaluate the corrosion control by the operation changes and utilized to understand the impacts of load cycling with different ramping up and down speeds. At the end of the project, the systems were converted to the permanent installation at the power plant to be used with the advanced process control system installed at the plant.

Advanced Sensors, Corrosion, Ash Deposition, Optim↗
DOE OSTI2024

Optical Photometric Indicators of Galaxy Cluster Relaxation

Abstract The most dynamically relaxed clusters of galaxies play a special role in cosmological studies as well as astrophysical studies of the intracluster medium (ICM) and active galactic nucleus feedback. While high-spatial-resolution imaging of the morphology of the ICM has long been the gold standard for establishing a cluster’s dynamical state, such data are not available from current or planned surveys, and thus require separate, pointed follow-up observations. With optical and/or near-IR photometric imaging, and red-sequence cluster finding results from those data, expected to be ubiquitously available for clusters discovered in upcoming optical and millimeter-wavelength surveys, it is worth asking how effectively photometric data alone can identify relaxed cluster candidates, before investing in, e.g., high-resolution X-ray observations. Here we assess the ability of several simple photometric measurements, based on the redMaPPer cluster finder run on Sloan Digital Sky Survey data, to reproduce X-ray classifications of dynamical state for an X-ray selected sample of massive clusters. We find that two simple metrics contrasting the bright central galaxy (BCG) to other cluster members can identify a complete sample of relaxed clusters with a purity of ∼40% in our data set. Including minimal ICM information in the form of a center position increases the purity to ∼60%. However, all three metrics depend critically on correctly identifying the BCG, which is presently a challenge for optical red-sequence cluster finders.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

TomoGAN: low-dose synchrotron x-ray tomography with generative adversarial networks: discussion

Synchrotron-based x-ray tomography is a noninvasive imaging technique that allows for reconstructing the internal structure of materials at high spatial resolutions from tens of micrometers to a few nanometers. In order to resolve sample features at smaller length scales, however, a higher radiation dose is required. Therefore, the limitation on the achievable resolution is set primarily by noise at these length scales. We present TomoGAN, a denoising technique based on generative adversarial networks, for improving the quality of reconstructed images for low-dose imaging conditions. We evaluate our approach in two photon-budget-limited experimental conditions: (1) sufficient number of low-dose projections (based on Nyquist sampling), and (2) insufficient or limited number of high-dose projections. In both cases, the angular sampling is assumed to be isotropic, and the photon budget throughout the experiment is fixed based on the maximum allowable radiation dose on the sample. Evaluation with both simulated and experimental datasets shows that our approach can significantly reduce noise in reconstructed images, improving the structural similarity score of simulation and experimental data from 0.18 to 0.9 and from 0.18 to 0.41, respectively. Furthermore, the quality of the reconstructed images with filtered back projection followed by our denoising approach exceeds that of reconstructions with the simultaneous iterative reconstruction technique, showing the computational superiority of our approach.

42 ENGINEERING↗
DOE OSTI2021

In Situ Inference for Earth System Predictability

An understanding of future evolution in precipitation extremes is critical to numerous DOE mission questions. Extreme events are by nature short time-scale events that are difficult to diagnose in available model data. Accurate modeling of extreme events necessarily requires high spatial resolution at the storm scale locally. However, the environment in which storms grow is dependent on global, remote, processes. These complex spatiotemporal relationships are impossible to diagnose at resolutions required to accurately model storms responsible for extreme precipitation. At exascale, climate simulations will produce results at fine enough resolution to investigate these relationships. However, the resulting data from these simulations will be far too large to save for post-simulation analysis. We advocate for fitting statistical models inside the simulations as they run, a context known as in situ, which will facilitate scientific investigations using the full fine-scale data stream. Figure 1 shows an example of the type of model we could consider, a Bayesian hierarchical spatial regression model. Precipitation extremes at each grid cell are modeled using extreme value distributions. Since extremes are rare, fitting models to individual grid cells can result in high variance and poor estimates. Instead, the model can be made more robust by smoothing the parameters of the extreme value model across space. Additionally, the parameters themselves can be functionally linked to other variables elsewhere in the simulation. Thus, we can use the fine-scale data to build more robust models for extremes that link extreme behavior to other climate patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

In Situ Inference for Earth System Predictability

Focal Area: Focal Area 3: Insight gleaned from complex simulated data using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge-guided AI. Science Challenge: An understanding of future evolution in precipitation extremes is critical to numerous DOE mission questions. Extreme events are by nature short time-scale events that are difficult to diagnose in available model data. Accurate modeling of extreme events necessarily requires high spatial resolution at the storm scale locally. However, the environment in which storms grow is dependent on global, remote, processes. These complex spatiotemporal relationships are impossible to diagnose at resolutions required to accurately model storms responsible for extreme precipitation. At exascale, climate simulations will produce results at fine enough resolution to investigate these relationships. However, the resulting data from these simulations will be far too large to save for post-simulation analysis. We advocate for fitting statistical models inside the simulations as they run, a context known as in situ, which will facilitate scientific investigations using the full fine-scale data stream. Figure 1 shows an example of the type of model we could consider, a Bayesian hierarchical spatial regression model. Precipitation extremes at each grid cell are modeled using extreme value distributions. Since extremes are rare, fitting models to individual grid cells can result in high variance and poor estimates. Instead, the model can be made more robust by smoothing the parameters of the extreme value model across space. Additionally, the parameters themselves can be functionally linked to other variables elsewhere in the simulation. Thus, we can use the fine-scale data to build more robust models for extremes that link extreme behavior to other climate patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Automating the detection of hydrological barriers and fragmentation in wetlands using deep learning and InSAR

The loss of hydrological connectivity and fragmentation of natural wetlands is a widespread driver of wetland degradation. Understanding where and how natural connectivity is impaired is essential for managing, protecting and remediating these ecosystems. Wetland Interferometric Synthetic Aperture Radar (Wetland InSAR) can provide information on surface flow orientation in wetlands at a high spatial resolution, which can be used for barrier detection. However, the broad application of this approach is constrained by the labour-intensive manual delineation of barriers based on mapped water levels. This study presents the first deep learning-based methodology for the automated detection of hydrological barriers. We trained a deep convolutional network to segment edge features of hydrological barriers in 25 image pairs captured by ALOS PALSAR-1 L-Band InSAR between 2006 and 2011. The training dataset consists of manually labelled and delineated barriers showing abrupt changes in water surface elevation and wrapped interferograms with high coherence. We tested this method across three wetland sites: the Everglades and southern Louisiana wetlands (United States) and the Cienaga de Zapata (Cuba). Across these sites, the convolutional network detected hydrological barriers with up to 84% accuracy. The model performed particularly well for linear hydrological barriers such as roads, dikes, and channels. Notably, some barriers impede flow only seasonally, appearing during low water levels and disappearing when water levels rise. Our automated approach to detecting and assessing wetland hydrologic connectivity can be applied more broadly to support the effective management of fragmented wetland ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Direct electron beam patterning of electro-optically active PEDOT:PSS

The optical and electronic tunability of the conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has enabled emerging applications as diverse as bioelectronics, flexible electronics, and micro- and nano-photonics. High-resolution spatial patterning of PEDOT:PSS opens up opportunities for novel active devices in a range of fields. However, typical lithographic processes require tedious indirect patterning and dry etch processes, while solution-processing methods such as ink-jet printing have limited spatial resolution. Here, we report a method for direct write nano-patterning of commercially available PEDOT:PSS through electron-beam induced solubility modulation. The written structures are water stable and maintain the conductivity as well as electrochemical and optical properties of PEDOT:PSS, highlighting the broad utility of our method. We demonstrate the potential of our strategy by preparing prototypical nano-wire structures with feature sizes down to 250 nm, an order of magnitude finer than previously reported direct write methods, opening the possibility of writing chip-scale microelectronic and optical devices. We finally use the high-resolution writing capabilities to fabricate electrically-switchable optical diffraction gratings. We show active switching in this archetypal system with >95 % contrast at CMOS-compatible voltages of +2 V and -3 V, offering a route towards highly-miniaturized dynamic optoelectronic devices.

42 ENGINEERING↗
DOE OSTI2021

Converting existing optical detectors into fast x-ray detectors

Here, the very short burn time and small size of burning plasmas created at advanced laser-fusion facilities will require high-spatial-resolution imaging diagnostics with fast time resolution. These instruments will need to function in an environment of extremely large neutron fluxes that will cause conventional diagnostics to fail because of radiation damage and induced background levels. One solution to this challenge is to perform an ultrafast conversion of the x-ray signals into the optical regime before the neutrons are able to reach the detector and then to relay image the signal out of the chamber and into a shielded bunker, protected from the effects of these neutrons. With this goal in mind, the OMEGA laser was used to demonstrate high-temporal-resolution x-ray imaging by using an x-ray snout to image an imploding backlighter capsule onto a semiconductor. The semiconductor was simultaneously probed with the existing velocity interferometry system for any surface reflector (VISAR) diagnostic, which uses an optical streak camera and provided a one-dimensional image of the phase in the semiconductor as a function of time. The phase induced in the semiconductor was linearly proportional to the x-ray emission from the backlighter capsule. This approach would then allow a sacrificial semiconductor to be attached at the end of an optical train with the VISAR and optical streak camera placed in a shielded bunker to operate in a high neutron environment and obtain time-dependent one-dimensional x-ray images or time-dependent x-ray spectra from a burning plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Spatially resolved x-ray detection with photonic crystal scintillators

We study the self-collimation phenomenon in photonic crystals (PhC) of wide bandgap materials for ultra-fast and high spatial resolution x-ray detection. We work on various heavy inorganic scintillators: BaF 2 , GaN, ZnO, CsI:Tl, NaI:Tl, LYSO, WO 4 compounds, and plastic scintillators. Conventional scintillator detectors do not rely on a direct detection mechanism; hence, they require intricate design and fabrication processes. We offer a PhC design to observe self-collimation phenomena and overcome the ongoing spatial resolution challenges with these types of materials. We investigate the photonic band diagrams and iso-frequency contours. Fourier transforms based on finite-difference time-domain and frequency domain simulations are done for verifying and analyzing the self-collimation with the selected material. Light extraction efficiency at the PhC–air interface, depending on the truncation distance from the excitation point, is measured. Beam divergence values are calculated at 1 mm propagation distance. The vertical field profiles are obtained to observe the confinement. For the spatial resolution analysis, cross-sectional beam profiles have been examined. Furthermore, Gaussian envelopes are fitted to beam profiles for a consistent data analysis, and full-width-at-half-maximum values are considered. As a result, we theoretically prove and demonstrate the spatially resolved x-ray detection at the sub-micrometer level for a wide range of scintillator materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of N in Ammonium-bearing Silicates with Electron Probe Microanalysis (EPMA)

Nitrogen is a primary constituent of Earth’s atmosphere and an essential component of many biological processes. Recent developments in understanding N incorporation into silicate minerals suggest that the solid earth and lithosphere could provide a substantial reservoir for the planetary N budget. Furthermore, determining the concentration and distribution of low abundances of N in silicates presents a significant challenge in microanalysis. We tested capabilities for high spatial resolution quantification of low levels of N using EPMA with the goal of developing standards to be used in coupled N and noble gas analyses of silicate minerals. We investigated the concentration and distribution of N in a suite of ammonium-bearing silicate minerals that reflect the dominant N-bearing phases of the lithosphere: tobelite, buddingtonite, ammonioleucite, tsaregorodtsevite, and hyalophane. These minerals form during NH4-rich alteration of K-bearing silicate minerals, and the bonding environment of N in each mineral is likely to differ based on crystal structure. Using an optimized analytical routine for N quantification enables sensitivity approaching 0.02 weight% N and high-resolution quantitative mapping of sub-micron variations in N contents.

58 GEOSCIENCES↗
DOE OSTI2023

Storage and Diffusion of Carbon and Nitrogen in Crustal Materials

Nitrogen is a primary constituent of Earth’s atmosphere and an essential component of many biological processes. Recent developments in understanding N incorporation into silicate minerals suggest that the solid earth and lithosphere could provide a substantial reservoir for the planetary N budget. Furthermore, determining the concentration and distribution of low abundances of N in silicates presents a significant challenge in microanalysis. We tested capabilities for high spatial resolution quantification of low levels of N using EPMA with the goal of developing standards to be used in coupled N and noble gas analyses of silicate minerals. We investigated the concentration and distribution of N in a suite of ammonium-bearing silicate minerals that reflect the dominant N-bearing phases of the lithosphere: tobelite, buddingtonite, ammonioleucite, tsaregorodtsevite, and hyalophane. These minerals form during NH 4 -rich alteration of K-bearing silicate minerals, and the bonding environment of N in each mineral is likely to differ based on crystal structure. Using an optimized analytical routine for N quantification enables sensitivity approaching 0.02 weight% N and high-resolution quantitative mapping of sub-micron variations in N contents.

58 GEOSCIENCES↗
DOE OSTI2023

Aerosol-Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review

An emergent direct-write approach, aerosol-jet printing (AJP), is gaining attention for the deployment of rapid and affordable microadditively manufactured energy-efficient sensors and printed electronics. AJP enables a broad range of ink viscosities (0.001–1 Pa s) for printing diverse materials ranging from ceramics and metals to polymers and biological matter. Reproducible, high-spatial-resolution features (≈10 µm), and wide standoff distances (1–11 mm) between the nozzle and the substrate facilitate conformal printing of complex geometrical designs on nonplanar—e.g., stepped or curved—surfaces. Here this paper aims to provide a comprehensive overview of state-of-the-art AJP-based sensors (e.g., strain and temperature gauges, biosensors, photosensors, humidity and surface acoustic wave sensors, dielectric elastomer actuators, and motion, smoke, and hazardous gas detectors) and to discuss prospective applications. The drive toward cost-effective devices that are smaller, lighter, and better-performing remains a frontier challenge in the field of printed electronics. Consequently, as AJP becomes increasingly utilized in the high-volume manufacturing of miniaturized active and passive sensors, it opens a pathway for facile large-scale fabrication of devices for a wide range of consumer and industrial applications, including transportation, agriculture, infrastructure, aerospace, national defense, and healthcare.

3-dimensional↗
DOE OSTI2025

Temperature and Water Levels Collectively Regulate Methane Emissions From Subtropical Freshwater Wetlands

Abstract Wetlands are the largest and most climate‐sensitive natural sources of methane. Accurately estimating wetland methane emissions involves reconciling inversion (“top‐down”) and process‐based (“bottom‐up”) models within the global methane budget. However, estimates from these two model types are inherently interdependent and often reveal substantial discrepancies. To enhance the reliability of both approaches, we need a comprehensive understanding of wetland methane emissions and an independent high‐resolution long‐term flux data set. Here, we employed a data‐driven random forest approach to identify key variables influencing methane emissions from subtropical freshwater wetlands in the Southeastern United States. The model‐estimated monthly mean methane fluxes fit well with measured methane fluxes ( R 2 = 0.67) at four representative FLUXNET‐CH4 wetland sites across the region. Variable importance analysis highlighted the sensitivity of subtropical freshwater wetland methane emissions to variations in both temperature and water levels. High temperatures facilitate methanogenesis by enhancing microbial activities, while elevated water levels maintain anaerobic conditions necessary for methane production. Notably, the response of methane emissions to water level fluctuations is contingent on temperature conditions, and vice versa. Moreover, we constructed the first high‐spatial‐resolution (∼1 km × 1 km) and long‐term (1982–2010) gridded regional wetland methane flux product for the Southeastern United States, estimating annual methane emissions from subtropical freshwater wetlands in the region at 4.93 ± 0.11 Tg CH 4 yr −1 for 1982–2010. This new benchmark product holds promise for validating and parameterizing uncertain wetland methane emission processes in bottom‐up models and provides improved prior information for top‐down models.

He, Keqi [Earth and Climate Sciences Nicholas Scho↗
DOE OSTI2021

Signal Origin of Electrochemical Strain Microscopy and Link to Local Chemical Distribution in Solid State Electrolytes

Electrochemical strain microscopy (ESM) is a distinguished method to characterize Li-ion mobility in energy materials with extremely high spatial resolution. The exact origin of the cantilever deflection when the technique is applied on solid state electrolytes (SSEs) is currently discussed in the literature. Under-standing local properties and influences on ion mobility in SSEs is of utmost importance to improve such materials for next generation batteries. Here, the exact signal formation process of ESM when applied on sodium super ionic conductor (NASICON)-type SSE containing Na- and Li-ions is investigated. Changes in the dielectric properties, which are linked to the local chemical composition, are found to be responsible for the observed contrast in the deflection of the cantilever instead of a physical volume change as a result of Vegard´s Law. The cantilever response is strongly reduced in areas of high sodium content which is attributed to a reduction of the tip-sample capacitance in comparison to areas with high lithium content. This is the first time a direct link between electrostatic forces in contact mode and local chemical information is demonstrated on SSEs. Furthermore, the results open up new possibilities in information gain since dielectric proper-ties are sensitive to subtle changes in local chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U

The In Situ Nanoprobe (ISN, 19-ID) beamline will be a new best-in-class long beamline to be constructed as part of the Advanced Photon Source Upgrade (APS-U) project [1, 2]. To achieve long working distance at high spatial resolution, the ISN instrument will be positioned 210 m downstream of the x-ray source, in a dedicated satellite building, currently under construction [3]. The ISN instrument will use a nano-focusing Kirkpatrick-Baez (K-B) mirror system, which will focus hard x-rays to a focal spot as small as 20 nm, with a large working distance of 61 mm. The large working distance provides space for various in situ sample cells for x-ray fluorescence tomography and ptychographic 3D imaging, allows the use of a separate, independent vacuum chambers for the optics and sample, and provides the flexibility to run experiments in vacuum or at ambient pressure. A consequence of the small spot size and large working distance are stringent requirements for high angular stability of the K-B mirrors (5 nrad V-mirror and 16 nrad H-mirror) and high relative stability be-tween focus spot and sample (4 nmRMS). Additional features include fly-scanning up to 2 kg mass, sample plus in situ cell, at 1 mm/s in vertical and/or horizontal directions over an area of 10 mm x 10 mm. Environmental capabili-ties will include heating and cooling, flow of fluids and applied fields, as required for electrochemistry and flow of gases at high temperature for catalysis. To achieve these capabilities and precise requirements we have used precision engineering fundamentals to guide the design process.

Kearney, Steven P.↗
DOE OSTI2020

X-ray and gamma-ray tomographic imaging of fuel relocation inside sodium fast reactor test assemblies during severe accidents

The present work reports on x-ray and gamma-ray high-spatial resolution computerized tomography measurements of the Pin Bundle Metallic Fuel Relocation (PBR) assemblies tested in the Metallic Uranium Safety Experiment (MUSE) facility at Argonne National Lab (ANL). The aim of the study was to characterize fuel relocation structures that develop during severe core accidents pertaining to SFR assemblies; these include but are not limited to advanced core disruption recreated in the PBR-1 assembly, and cladding breach recreated in the PBR-2 assembly. We report the x-ray tomography measurements were able to resolve small quantities of relocation fuel; with increased presence of relocation fuel, the x-ray 1measurements spatially mapped the material but could not resolve the inner regions of these. The gamma-tomography measurements showed improved results, resolving the relocation structures in great detail. The upper plenum of the PBR-1 assembly where the molten uranium was initially inserted presented high structural damage, reflected by the partial and complete disintegration of the central rods. Relocation fuel filled the subchannels, adhering to surviving cladding walls and the assembly casing. In the lower portion of the measured section, the tomogram degrades due to photon starvation effects hinting at the increased amount of relocation fuel potentially plugging the assembly; flow blockage in this section was difficult to determine due to the tomogram’s degradation from photon starvation. Small fragments were observed further down the assembly, dislodged from the initial insertion of the molten material. This section was used as an unperturbed assembly reference, with a calculated blockage of less than 1% from the present fragments. The PBR-2 assembly was characterized by columnar relocation structures propagating through the subchannels. Three of the relocation structures were captured in the measured section, with evidence of cross migration on to adjacent subchannels. The measured section in this assembly captures the leading edge of two structures. The calculated flow blockage was 16% in the planes where the three relocation structures are present, but this quickly decreases to approximately 5% past the leading edge of two of the structures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗