Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Winds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

High-efficiency wind turbine

Vertical axis wind turbine incorporates several unique features to extract more energy from wind increasing efficiency 20% over conventional propeller driven units. System also features devices that utilize solar energy or chimney effluents during periods of no wind.

Hein, L. A.↗

Climatological characteristics of high altitude wind shear and lapse rate layers

Indications of the climatological distribution of wind shear and temperature lapse and inversion rates as observed by rawinsonde measurements over the western United States are recorded. Frequencies of the strongest shear, lapse rates, and inversion layer strengths were observed for a 1 year period of record and were tabulated for the lower troposphere, the upper troposphere, and five altitude intervals in the lower stratosphere. Selected bivariate frequencies were also tabulated. Strong wind shears, lapse rates, and inversion are observed less frequently as altitude increases from 175 millibars to 20 millibars. On a seasonal basis the frequencies were higher in winter than in summer except for minor influences due to increased tropopause altitude in summer and the stratospheric wind reversal in the spring and fall.

Ehernberger, L. J.↗

RW Sextantis, a disk with a hot, high-velocity wind

The continuum spectrum of the flickering blue variable RW Sex was observed from 10,000 to 1150 A. The star is a cataclysmic variable currently stabilized at maximum, and the spectrum is dominated by an accretion disk, with flat spectrum in the ultraviolet, except at more than 5000 A, where a blackbody near 7000 K is seen. A distance of 400 pc is derived, if the latter arises from an F type main sequence star. The accretion rate required is near 10 to the -8th solar masses per year. Only weak emission is seen, except for Lyman alpha; strong, broad UV absorption lines are seen with centers displaced up to -3000 km/s, with terminal velocities up to -4500 km/s, the velocity of escape from a white dwarf. The low X-ray flux may arise from absorption within an unusually dense, hot wind from the innermost portions of the disk. The estimated mass loss rate is nearly 10 to the -12th solar masses per year.

Greenstein, J. L.↗

Construction and test of flexible walls for the throat of the ILR high-speed wind tunnel

Aerodynamic tests in wind tunnels are jeopardized by the lateral limitations of the throat. This influence expands with increasing size of the model in proportion to the cross-section of the throat. Wall interference of this type can be avoided by giving the wall the form of a stream surface that would be identical to the one observed during free flight. To solve this problem, flexible walls that can adapt to every contour of surface flow are needed.

Igeta, Y.↗

Transition research in low-disturbance high-speed wind tunnels

The technical requirements and test data from the Mach 3.5 Pilot Low-Disturbance Tunnel are presented. This unique facility provides a test region with essentially zero-acoustic noise and simulates, for the first time, the low-disturbance conditions of atmospheric flight. Applications to the test results of linear stability theory with the e exp N method indicate that transition locations for both simple and complex flows are well predicted by using N of about 9 to 11.

Beckwith, I. E.↗

The new French high-speed wind tunnel

The plans for the wind tunnel at Issey-les-Moulineaux are discussed in relation to concerns about the Law of Similitude and propeller speed.

WIND TUNNELS - ISSY-LES-MOULINEAUX (FR )↗

High-speed Wind Tunnels

Wind tunnel construction and design is discussed especially in relation to subsonic and supersonic speeds. Reynolds Numbers and the theory of compressible flows are also taken into consideration in designing new tunnels.

Ackeret, J↗

An Investigation of the Aerodynamic Characteristics in Pitch of an XB-52 Airplane Model in a High-Speed Wind Tunnel

A wind-tunnel investigation of a 0.049-scale model of the Boeing XB-52 airplane was made at Mach numbers from 0.30 to 0.925 and at corresponding Reynolds numbers from about 2.3 x 10(exp 6) to 4.3 x 10(exp 6). The results of the investigation indicate satisfactory static longitudinal stability throughout the test Mach-number range and some loss in tail effectiveness beginning at about 0.80 Mach number. A comparison of the results of these tests with those of the same model in the Boeing Airplane Company's wind tunnel showed close agreement of lift- and drag-divergence Mach numbers. Slight differences were observed in tail effectiveness and the position of the stick-fixed neutral point.

Cleary, Joseph W.↗

Estimating Sea Surface Salinity and Wind Using Combined Passive and Active L-Band Microwave Observations

Several L-band microwave radiometer and radar missions have been, or will be, operating in space for land and ocean observations. These include the NASA Aquarius mission and the Soil Moisture Active Passive (SMAP) mission, both of which use combined passive/ active L-band instruments. Aquarius s passive/active L-band microwave sensor has been designed to map the salinity field at the surface of the ocean from space. SMAP s primary objectives are for soil moisture and freeze/thaw detection, but it will operate continuously over the ocean, and hence will have significant potential for ocean surface research. In this innovation, an algorithm has been developed to retrieve simultaneously ocean surface salinity and wind from combined passive/active L-band microwave observations of sea surfaces. The algorithm takes advantage of the differing response of brightness temperatures and radar backscatter to salinity, wind speed, and direction, thus minimizing the least squares error (LSE) measure, which signifies the difference between measurements and model functions of brightness temperatures and radar backscatter. The algorithm uses the conjugate gradient method to search for the local minima of the LSE. Three LSE measures with different measurement combinations have been tested. The first LSE measure uses passive microwave data only with retrieval errors reaching 1 to 2 psu (practical salinity units) for salinity, and 1 to 2 m/s for wind speed. The second LSE measure uses both passive and active microwave data for vertical and horizontal polarizations. The addition of active microwave data significantly improves the retrieval accuracy by about a factor of five. To mitigate the impact of Faraday rotation on satellite observations, the third LSE measure uses measurement combinations invariant under the Faraday rotation. For Aquarius, the expected RMS SSS (sea surface salinity) error will be less than about 0.2 psu for low winds, and increases to 0.3 psu at 25 m/s wind speed for warm waters (25 C). To achieve the required 0.2 psu accuracy, the impact of sea surface roughness (e.g. wind-generated ripples) on the observed brightness temperature has to be corrected to better than one tenth of a degree Kelvin. With this algorithm, the accuracy of retrieved wind speed will be high, varying from a few tenths to 0.6 m/s. The expected direction accuracy is also excellent (less than 10 ) for mid to high winds, but degrades for lower speeds (less than 7 m/s).

Yueh, Simon H.↗

High resolution wind measurements for offshore wind energy development

A method, apparatus, system, article of manufacture, and computer readable storage medium provide the ability to measure wind. Data at a first resolution (i.e., low resolution data) is collected by a satellite scatterometer. Thin slices of the data are determined. A collocation of the data slices are determined at each grid cell center to obtain ensembles of collocated data slices. Each ensemble of collocated data slices is decomposed into a mean part and a fluctuating part. The data is reconstructed at a second resolution from the mean part and a residue of the fluctuating part. A wind measurement is determined from the data at the second resolution using a wind model function. A description of the wind measurement is output.

Nghiem, Son Van↗