Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Stable Silicene in Graphene/Silicene Van der Waals Heterostructures

Silicene-based van der Waals heterostructures are theoretically predicted to have interesting physical properties, but their experimental fabrication has remained a challenge because of the easy oxidation of silicene in air. Here, the fabrication of graphene/silicene van der Waals heterostructures by silicon intercalation is reported. Density functional theory calculations show weak interactions between graphene and silicene layers, confirming the formation of van der Waals heterostructures. The heterostructures show no observable damage after air exposure for extended periods, indicating good air stability. The I–V characteristics of the vertical graphene/silicene/Ru heterostructures show rectification behavior.

36 MATERIALS SCIENCE↗

Investigation on the Current Transport Characteristics of SrTiO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7−x} Heterostructure

By the combined use of the sol-gel and pulsed laser deposition methods, the SrTiO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7−x} (STO/YBCO) heterostructure was prepared on a LaAlO{sub 3} substrate. XRD results and φ scanning test showed that the prepared STO/YBCO heterostructure had good biaxial texture. Moreover, a Pt electrode was sputtered on the STO/YBCO heterostructure to investigate the current density-voltage (J − V) characteristic curves of STO/YBCO in the 50–300 K temperature range. The results showed that the STO/YBCO heterostructure had good rectifying characteristics. With an applied positive bias voltage smaller than 3.7 V, the current density of the STO/YBCO heterostructure decreased with the decrease of temperature; for higher voltages, on the contrary, the current density increased with the decrease of temperature. When the YBCO experienced superconducting transition, the turn-on voltage (V{sub t}) changed suddenly due to the sudden opening of the superconducting energy gap of YBCO. The V{sub t} variation obtained from the experiment was essentially consistent with the known value of the YBCO superconducting energy gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-step synthesis of Bi{sub 2}Te{sub 3}-Te nanoarrays with sheet-rod multiple heterostructure

Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in large scale, using Te nanorod arrays as the in-situ templates under solvothermal process. The array is formed by the ordered Bi{sub 2}Te{sub 3}-Te rods where Bi{sub 2}Te{sub 3} sheets distribute from the top face to the bottom face along the Te rod vertically. The microstructure of the heterostructure was studied through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The electrical conductivity and Seebeck coefficient of the arrays were also studied. The course of reaction was monitored so as to propose a possible growth mechanism of such novel heterostructure. The key for the preparation of such heterostructure is to balance the velocity between the dissolution of Te rods and the formation of Bi{sub 2}Te{sub 3} sheets. This synthetic approach could be promising to prepare self-assembled low-dimensional nanoarrays of metals and semiconductors with high yield. - Graphical abstract: Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in a large scale using Te nanorod arrays as the in-situ templates under the solvothermal process. Display Omitted

36 MATERIALS SCIENCE↗

Three-dimensional Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures for improving photocatalytic activity

Highlights: • Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O 3D network heterostructures are prepared via a simple precipitatation method. • Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O networks exhibit much enhanced photocatalytic activity. • High photocatalytic activity is attributed to its heterostructure and 3D architectures. - Abstract: Three-dimensional Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures were fabricated by loading Ag{sub 2}O nanoparticles on WO{sub 3}·0.33H{sub 2}O 3D networks via a simple chemical precipitation method. The Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures exhibited much enhanced photocatalytic activity for the degradation of methylene blue (MB) under simulated solar light irradiation. The optimal molar ratio of Ag{sub 2}O and WO{sub 3}·0.33H{sub 2}O is 1:2. The outstanding photocatalytic activity of the Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O can be attributed to its large surface area of the three-dimensional networks, the enhanced sunlight absorption and the prevention of electrons–holes combination from the heterostructures. The experiment result demonstrates that wide band gap semiconductor (WO{sub 3}·0.33H{sub 2}O) modified by narrow band gap metal oxide (Ag{sub 2}O) with 3D architecture will be an effective route to enhance its photocatalytic activity.

36 MATERIALS SCIENCE↗

Rapid preparation of TiO2-SiO2 heterostructure photonic crystal in the near-infrared region via a modified electrophoresis-assisted self-assembly process

Highlights: • TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated. • The voltage played an important role in the electrophoresis-assisted self-assembly. • The photonic band gap of photonic crystal was in the near-infrared region. • The drawing process can accelerate the speed of self-assembling. - Abstract: TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated by a modified electrophoresis-assisted self-assembly process. The effect of voltage on preparation and properties of TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was discussed. The results of the tests show that TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal with different structures can be rapidly fabricated by controlling the voltage. With the increase of voltage, the TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal is more likely to form an ordered hexagonal array and shows a more bright and uniform color. Meanwhile, the central wavelength of the photonic band gap will be blue shifted in the near-infrared region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

P-n heterostructured TiO2/NiO double-shelled hollow spheres for the photocatalytic degradation of papermaking wastewater

Highlights: • P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared. • A cubic-structured NiO layer is grown on surface of anatase TiO{sub 2} hollow sphere. • TiO{sub 2}/NiO show high photocatalytic activity for papermaking wastewater degradation. • The COD{sub Cr} removal rate of wastewater reaches 98.1% after 6 h of photodegradation. - Abstract: P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared through sol–gel and hydrothermal processes. TiO{sub 2}/NiO nanomaterials were comprehensively characterized, and the results reveal that a cubic-structured NiO layer is successfully grown on the surface of the anatase TiO{sub 2} hollow sphere to achieve a p-n heterostructure. The thickness of TiO{sub 2} shell is ∼20 nm, and that of NiO shell is 10–25 nm. Compared with the pure TiO{sub 2} hollow spheres, the prepared p-n heterostructures display a considerably higher photocatalytic activity for papermaking wastewater degradation under UV light irradiation. The chemical oxygen demand removal rate of papermaking wastewater reaches 98.1% after 6 h of photodegradation with DSTN2 as the photocatalyst. The enhanced photocatalytic activity is due to the synergetic effects of p-n heterostructures and the large specific surface area of the catalyst; these effects may promote the separation of photogenerated electron–hole pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electronic Properties of Interfaces in Graphene and Hexagonal Boron Nitride Lateral Heterostructures

The in-plane heterostructures composed of graphene and hexagonal boron nitride (G/BN), as the first kind of two-dimensional metal/semiconductor heterostructures of one-atom thickness, are attractive for both fundamental low-dimensional physics and nanoscale devices because of the tailorable electronic properties. The atomic structures and electronic properties of interfaces in lateral G/BN heterostructures are investigated by first-principles calculations. The symmetric armchair interfaces have a similar formation energy but a larger band gap compared with the nonsymmetric interfaces. G/BN heterostructures with zigzag-type interfaces constructed under the guide of Clar’s rule are found to possess a lower formation energy than those with abrupt interfaces and open a finite band gap. In addition to the zigzag and armchair interfaces, other misorientated interfaces with pentagon and heptagon rings are also stable with low formation energies of 4.4–6.8 eV/nm. These theoretical results are important to clarify the correlation between atomic structures and electronic properties of in-plane G/BN heterostructures and establish a fundamental picture for further theoretical studies and device design.

36 MATERIALS SCIENCE↗

Highly Asymmetric Graphene Layer Doping and Band Structure Manipulation in Rare Earth–Graphene Heterostructure by Targeted Bonding of the Intercalated Gadolinium

Heterostructures consisting of vertically stacked two-dimensional (2D) materials have recently gained large attention due to their highly controllable electronic properties and resulting quantum phases. In contrast to the mechanically stacked multilayered systems, which offer exceptional control over a stacking sequence or interlayer twist angles, the epitaxially grown 2D materials express unprecedented quality and stability over wafer-scale lengths. However, controlling the growth conditions remains a major obstacle toward the formation of complex, epitaxial heterostructures with well-defined electronic properties. Here, we synthesized a trilayer graphene heterostructure on the SiC(0001) substrate with two specific interlayer locations occupied by gadolinium. We applied multitechnique methodology based on low-temperature scanning tunneling microscopy/spectroscopy (STM/S) and angle-resolved photoelectron spectroscopy (ARPES) to determine the intercalant’s locations in the complex, epitaxial graphene heterostructure. Our approach relies on very high quality and large, micrometer-scale homogeneity of the synthesized system. The experimentally determined electronic structure is dominated by the two topmost graphene layers. Overall, our spectroscopic results show quantitative agreement between global ARPES, local STM/S, and density functional theory predictions. The characterized electronic properties primarily reflect highly anisotropic doping levels between the two corresponding graphene layers, which significantly affect the band structure topology. Two pairs of hybridized massive Dirac bands from our initial synthesis–the bilayer graphene on the SiC(0001) substrate–are transformed upon Gd intercalation into two pairs of massless Dirac bands with a new hybridization region in between. Our results open perspectives in the realization of exotic 2D quantum materials via atomically precise synthesis of epitaxial, multilayered graphene–rare earth heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-Step Synthesis and Operando Electrochemical Impedance Spectroscopic Characterization of Heterostructured MoP–Mo 2 N Electrocatalysts for Stable Hydrogen Evolution Reaction

Here this study presents a novel synthesis of self-standing MoP and Mo 2 N heterostructured electrocatalysts with enhanced stability and catalytic performance. Facilitated by the controlled phase and interfacial microstructure, the seamless structures of these catalysts minimize internal resistivity and prevent local corrosion, contributing to increased stability. The chemical synthesis proceeds with etching step to activate the surface, followed by phosphor-nitriding in a chemical vapor deposition chamber to produce MoP-Mo 2 N@Mo heterostructured electrocatalysts. X-ray diffraction analyses confirm the presence of MoP, Mo 2 N, and Mo phases in the electrocatalyst. Morphology studies using scanning electron microscopy characterizes the hierarchical growth of structures, indicating successful formation of the heterostructure. X-ray photoelectron spectroscopy (XPS) analyses of the as-synthesized and post-catalytic activity samples reveal the chemical shift in terms of binding energy (BE) of Mo 3d XPS peak, especially after catalytic activity. The XPS BE shifts attributed to changes in oxidation state, electron transfer, and surface reconstruction during catalysis. Electrochemical evaluation of the catalysts demonstrates the superior performance of the MoP-Mo 2 N@Mo heterostructured catalyst in hydrogen evolution reactions (HER), with lower overpotentials and enhanced Tafel slopes. Stability tests reveal changes in double layer capacitance over time, suggesting surface reconstruction and increased active surface area during catalysis. Operando electrochemical impedance spectroscopy (EIS) further elucidates the dynamic changes in resistance and charge transfer during HER. Overall, comprehensive understanding of the synthesis, characterization, and electrochemical behavior of the developed MoP-Mo 2 N@Mo heterostructured electrocatalyst as presented in this paper highlights their potential utilization in sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photovoltaic Effect of a Ferroelectric-Luminescent Heterostructure under Infrared Light Illumination

Here in this report, ferroelectric-luminescent heterostructure is designed to convert the infrared light into electric power. We use BiFeO 3 (BFO) as the ferroelectric layer, and Y 2 O 3 :Yb,Tm (YOT) as the upconversion layer. Different from the conventional ferroelectric materials, this heterostructure exhibits switchable and stable photovoltaic effects under the 980 nm illumination, whose energy is much lower than the bandgap of BFO. The energy transfer mechanism in this heterostructure is therefore studied carefully. It is found that the highly efficient non-radiative energy transfer process from YOT to BFO plays a critical role in achieving the below-bandgap-photon excited photovoltaic effects in this heterostructure. Our results also indicate that by introducing asymmetric electrodes, both the photovoltage and photocurrent are further enhanced when the built-in field and the depolarization field are aligned. The construction of ferroelectric-luminescent heterostructure is consequently proposed as a promising route to enhance photovoltaic effects of ferroelectric materials by extending the absorption of the solar spectrum.

14 SOLAR ENERGY↗

Heterostructured Lepidocrocite Titanate-Carbon Nanosheets for Electrochemical Applications

Lepidocrocite-type titanates that reversibly intercalate sodium ions at low potentials (~0.6 V vs Na/Na + ) are promising anode candidates for sodium-ion batteries. However, large amounts of carbon additives are often used to improve their electrical conductivity and overcome poor cycling performance in the electrode composites. To ameliorate electronic transport issues of lepidocrocite titanate (K 0.8 Ti 1.73 Li 0.27 O 4 , KTL) in sodium-ion batteries, we have designed and synthesized heterostructures of exfoliated lepidocrocite-type titanium oxide (LTO) nanosheets with alternating carbon layers via a solution-based self-assembly approach. Positively charged dopamine (Dopa) was used as the carbon precursor and intercalated between negatively charged exfoliated titania nanosheets through electrostatic interaction. Dopa-intercalated LTO was then annealed under argon to form conductive carbon layers between titania sheets. The carbon content in the heterostructures was controlled by modifying the self-assembly conditions (i.e., pH, stirring duration, and Dopa-to-LTO ratio). Electrodes were prepared using carbonized heterostructures (LTO-C) without adding more carbon to the composites and tested in sodium half-cell configurations. Further, higher capacities and improved capacity retention over 250 cycles and lower impedance were observed, as the carbon content of LTO-C heterostructures was increased from 0% (LTO nanosheets) to 30%. These results indicate that the self-assembly approach for 2D heterostructured electrode materials is a promising strategy to overcome electronic transport limitations of layered transition-metal oxides and improve their electrochemical performance for next-generation energy storage applications.

25 ENERGY STORAGE↗

Anion Exchange of Ruddlesden–Popper Lead Halide Perovskites Produces Stable Lateral Heterostructures

Heterostructures of three-dimensional (3D) halide perovskites are unstable because of facile anion interdiffusion at halide interfaces. Two-dimensional (2D) Ruddlesden–Popper halide perovskites (RPPs) show suppressed and anisotropic ion diffu-sion that could enable stable RPP heterostructures, yet the direct and general growth of lateral RPP heterostructures remains challenging. Here we show that halide miscibility in RPPs decreases with perovskite layer thickness (n), enabling the for-mation of sharp halide lateral heterostructures from n = 1 and 2 RP lead iodide microplates via anion exchange with hydro-gen bromide vapor. In contrast, RPPs with n = 3 form more diffuse lateral heterojunctions, more similar to those in 3D perov-skites. The anion exchange behaviors are further modulated by the spacer and A-site cations in the RPP structures. These new insights, and kinetic studies of the exchange reactions, enable the preparation of lateral heterostructures from various n = 2 RPPs that are more stable against anion interdiffusion and degradation for potential device applications.

Roy, Chris R.↗

Synthesis of freestanding single-crystal perovskite films and heterostructures by etching of sacrificial water-soluble layers

Here, the ability to create and manipulate materials in two-dimensional (2D) form has repeatedly had transformative impact on science and technology. In parallel with the exfoliation and stacking of intrinsically layered crystals 1, 2, 3, 4, 5 , atomic-scale thin film growth of complex materials has enabled the creation of artificial 2D heterostructures with novel functionality 6, 7, 8, 9 and emergent phenomena, as seen in perovskite heterostructures 10, 11, 12 . However, separation of these layers from the growth substrate has proved challenging, limiting the manipulation capabilities of these heterostructures with respect to exfoliated materials. Here we present a general method to create freestanding perovskite membranes. The key is the epitaxial growth of water-soluble Sr 3 Al 2 O 6 on perovskite substrates, followed by in situ growth of films and heterostructures. Millimetre-size single-crystalline membranes are produced by etching the Sr 3 Al 2 O 6 layer in water, providing the opportunity to transfer them to arbitrary substrates and integrate them with heterostructures of semiconductors and layered compounds 13, 14 .

36 MATERIALS SCIENCE↗

Indirect excitons in van der Waals heterostructures at room temperature

Indirect excitons (IXs) are explored both for studying quantum Bose gases in semiconductor materials and for the development of excitonic devices. IXs were extensively studied in III–V and II–VI semiconductor heterostructures where IX range of existence has been limited to low temperatures. Here, we present the observation of IXs at room temperature in van der Waals transition metal dichalcogenide (TMD) heterostructures. Here, this is achieved in TMD heterostructures based on monolayers of MoS2 separated by atomically thin hexagonal boron nitride. The IXs we realize in the TMD heterostructure have lifetimes orders of magnitude longer than lifetimes of direct excitons in single-layer TMD and their energy is gate controlled. The realization of IXs at room temperature establishes the TMD heterostructures as a material platform both for a field of high-temperature quantum Bose gases of IXs and for a field of high-temperature excitonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial growth of highly symmetrical branched noble metal-semiconductor heterostructures with efficient plasmon-induced hot-electron transfer

Epitaxial growth is one of the most commonly used strategies to precisely tailor heterostructures with well-defined compositions, morphologies, crystal phases, and interfaces for various applications. However, as epitaxial growth requires a small interfacial lattice mismatch between the components, it remains a challenge for the epitaxial synthesis of heterostructures constructed by materials with large lattice mismatch and/or different chemical bonding, especially the noble metal-semiconductor heterostructures. Here, we develop a noble metal-seeded epitaxial growth strategy to prepare highly symmetrical noble metal-semiconductor branched heterostructures with desired spatial configurations, i.e., twenty CdS (or CdSe) nanorods epitaxially grown on twenty exposed (111) facets of Ag icosahedral nanocrystal, albeit a large lattice mismatch (more than 40%). Importantly, a high quantum yield (QY) of plasmon-induced hot-electron transferred from Ag to CdS was observed in epitaxial Ag-CdS icosapods (18.1%). This work demonstrates that epitaxial growth can be achieved in heterostructures composed of materials with large lattice mismatches. The constructed epitaxial noble metal-semiconductor interfaces could be an ideal platform for investigating the role of interfaces in various physicochemical processes.

36 MATERIALS SCIENCE↗

Enhanced valley splitting of WSe 2 in twisted van der Waals WSe 2 /CrI 3 heterostructures

Van der Waals (vdW) heterostructures composed of different two-dimensional (2D) materials offer an easily accessible way to combine properties of individual materials for applications. Owing to the discovery of a set of unanticipated physical phenomena, the twisted 2D vdW heterostructures have gained considerable attention recently. Here, we report enhanced valley splitting in twisted 2D vdW WSe 2 /CrI 3 heterostructures. In particular, the splitting can be 1200% (or 5.18 meV) of the value for a non-twisted heterostructure. According to the $k ∙ p$ model, this value is equivalent to a ~20T external magnetic field applied perpendicular to the 2D sheet. The thermodynamic stability of 2D vdW WSe 2 /CrI 3 heterostructures, on the other hand, depends linearly on the interlayer twisting angle.

36 MATERIALS SCIENCE↗

Cavity electrodynamics of van der Waals heterostructures

Van der Waals heterostructures host many-body quantum phenomena that are tunable in situ using electrostatic gates. Their constituent two-dimensional materials and gates can naturally form plasmonic self-cavities, confining light in standing waves of current density due to finite-size effects. The plasmonic resonances of typical graphite gates fall in the gigahertz to terahertz range, corresponding to the same microelectronvolt to millielectronvolt energy scale as the phenomena in van der Waals heterostructures that they electrically control. This raises the possibility that the built-in cavity modes of graphite gates are relevant for shaping the low-energy physics of these heterostructures. However, probing these cavity-coupled electrodynamics is challenging as devices are notably smaller than the diffraction limit at the relevant wavelengths. Here we report on the intrinsic cavity conductivity of gate-tunable graphene heterostructures. As the carrier density is tuned, we observe coupling and spectral weight transfer between graphene and graphite plasmonic cavity modes in the ultrastrong coupling regime. We present an analytical model to describe the results and provide general principles for cavity design. Our findings show that intrinsic cavity effects are important for understanding the low-energy electrodynamics of van der Waals heterostructures and open a pathway for useful functionality through cavity control.

Electronic properties and materials↗

Mosaic lateral heterostructures in two-dimensional perovskite

Lateral heterostructures are important for exploring exotic physics, developing new devices and achieving device miniaturization. Endo-epitaxial growth occurring in patterned templates presents a promising strategy to realize extensive patterned areas in heterostructures, as recently demonstrated with two-dimensional (2D) covalent materials. However, the conventional lithography and etching processes used to prepare patterned templates are too aggressive for 2D lead halide perovskites, owing to their inherently soft and unstable ionic lattice. Here we create square holes of controllable size within 2D lead halide perovskites, enabling the fabrication of continuous lateral heterostructures over large areas. We demonstrate that the square holes form through spontaneous etching, a process initiated by internal strain and stabilized along the [100]/[010] crystallographic direction. Furthermore, the size of the square holes can be controlled by adjusting the etching time and temperature. Moreover, by incorporating a rapid solvent evaporation growth technique, the edges of the square holes act as templates for epitaxial growth of another type of perovskite, incorporating different halide or metal ions. Finally, we realized a series of mosaic lateral heterostructures that can emit various colours for light-emitting devices. As a result, this synthesis of diverse 2D perovskite mosaic lateral heterostructures provides valuable insights into the structural characteristics of perovskites and offers a versatile material platform for the development of complex integrated emitting devices.

Organic–inorganic nanostructures↗