Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYDROGEN MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Modeling the neutral hydrogen distribution in the post-reionization Universe: intensity mapping

We model the distribution of neutral hydrogen (HI) in the post-reionization era and investigate its detectability in 21 cm intensity mapping with future radio telescopes like the Square Kilometer array (SKA). We rely on high resolution hydrodynamical N-body simulations that have a state-of-the-art treatment of the low density photoionized gas in the inter-galactic medium (IGM). The HI is assigned a-posteriori to the gas particles following two different approaches: a halo-based method in which HI is assigned only to gas particles residing within dark matter halos; a particle-based method that assigns HI to all gas particles using a prescription based on the physical properties of the particles. The HI statistical properties are then compared to the observational properties of Damped Lyman-α Absorbers (DLAs) and of lower column density systems and reasonable good agreement is found for all the cases. Among the halo-based method, we further consider two different schemes that aim at reproducing the observed properties of DLAs by distributing HI inside halos: one of this results in a much higher bias for DLAs, in agreement with recent observations, which boosts the 21 cm power spectrum by a factor ∼ 4 with respect to the other recipe. Furthermore, we quantify the contribution of HI in the diffuse IGM to both Ω{sub HI} and the HI power spectrum finding to be subdominant in both cases. We compute the 21 cm power spectrum from the simulated HI distribution and calculate the expected signal for both SKA1-mid and SKA1-low configurations at 2.4 ≤ z ≤ 4. We find that SKA will be able to detect the 21 cm power spectrum, in the non-linear regime, up to k ∼ 1 h/Mpc for SKA1-mid and k ∼ 5 h/Mpc for SKA1-low with 100 hours of observations. We also investigate the perspective of imaging the HI distribution. Our findings indicate that SKA1-low could detect the most massive HI peaks with a signal to noise ratio (SNR) higher than 5 for an observation time of about 1000 hours at z = 4, for a synthesized beam width of 2'. Detection at redshifts z≥2.4 with SKA1-mid would instead require a much longer observation time to achieve a comparable SNR level.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlation and transport properties for mixtures at constant pressure and temperature

Transport properties of mixtures of elements in the dense plasma regime play an important role in natural astrophysical and experimental systems, e.g., inertial confinement fusion. In this paper, we present a series of orbital-free molecular dynamics simulations on dense plasma mixtures with comparison to a global pseudo ion in jellium model. Hydrogen is mixed with elements of increasingly high atomic number (lithium, carbon, aluminum, copper, and silver) at a fixed temperature of 100 eV and constant pressure set by pure hydrogen at 2g/cm 3 , namely, 370 Mbars. We compute ionic transport coefficients, such as self-diffusion, mutual diffusion, and viscosity for various concentrations. Small concentrations of the heavy atoms significantly change the density of the plasma and decrease the transport coefficients. The structure of the mixture evidences a strong Coulomb coupling between heavy ions and the appearance of a broad correlation peak at short distances between hydrogen atoms. Finally, the concept of an effective one component plasma is used to quantify the overcorrelation of the light element induced by the admixture of a heavy element.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational Fluid Dynamics Modeling of Nickel Hydrogen Batteries

An electrochemical Ni-H2 battery model has been expanded to include thermal effects. A thermal energy conservation equation was derived from first principles. An electrochemical and thermal coupled model was created by the addition of this equation to an existing multiphase, electrochemical model. Charging at various rates was investigated and the results validated against experimental data. Reaction currents, pressure changes, temperature profiles, and concentration variations within the cell are predicted numerically and compared with available data and theory.

Cullion, R.↗

NLTE model stellar atmospheres with line blanketing near the series limits

In this paper we study the influence of line-merging regions at the intermediate long-wavelength side of a continuum threshold on the computed model atmosphere structure and predicted spectrum. In order to model these regions sufficiently accurately, we have developed two concepts. First, we have extended the occupation probability formalism of Hummer and Mihalas to non-local thermodynamic equilibrium (non-LTE) plasmas. Second, in order to treat the very complicated opacity in the line merging region, we have generalized the concept of opacity distribution functions to treat non-LTE situations. All Rydberg states are consistently included within this framework, so that no arbitrary cutoff of high (LTE) levels is made. We have calculated several pure hydrogen models atmospheres for two effective temperatures, T(sub eff) = 20000 and 35000 K, and discussed the differences between models calculated with various treatments of the line merging. In particular, we have shown that the error in the predicted profiles of Balmer lines resulting from the neglect of line merging is typically of the order of 3-4%, while the errors in the far-UV portion of the Balmer continuum reaches 15-35%. The errors generally decrease with increasing effective temperature. At the same time, the internal accuracy of the models is shown to be about or below 0.5% for all predicted spectral features. We conclude that for interpreting current high-accuracy spectrophotometric observations models including the line merging are necessary, and that the formalism developed in this paper is capable of providing a sufficiently accurate and robust modeling technique.

Hubeny, I.↗

Reduced-order CFD modeling of cryogenic hydrogen isotope extrusion for pellet fueling

This study presents a reduced-order model (ROM) for computational fluid dynamics (CFD) simulations of cryogenic hydrogen isotope extrusions, focusing on protium (H₂) and deuterium (D₂) piston extruders. Using a 2D axisymmetric ROM in ANSYS-Polyflow, significant computational savings were achieved (runtime reduced from 9∼24 h to 3∼5 min), with extrusion force discrepancies between the 2D ROM and 3D models being on the order of 1%. Parametric studies identified optimal cutoff shear rates in the viscosity model (0.01/s for H₂ and 0.001/s for D₂), providing recommendations for future simulations. Finally, a comprehensive comparison of ROM results with experimental data was performed across varying geometries, cryogenic materials, temperatures, extrusion lengths, and piston velocities. Predictions at low extrusion temperatures met the objective of providing quick and efficient solutions with an acceptable extrusion force error of approximately 10% or less, validating the effectiveness of the 2D ROM approach. However, at high temperatures closer to the triple point, extrusion force error grows, which necessitates developing an improved model that accounts for temperature effects, e.g. melting. Nevertheless, the findings still represent a significant improvement in efficiency of CFD modeling of cryogenic hydrogenic extrusion. The ROM framework can also be extended to tritium (T2) and screw extruders, which will ultimately provide a fast and effective tool for optimizing pellet injector design for ITER and future reactor systems.

Fan, Joy [ORNL] (ORCID:0000000229751735)↗

Constructing Hubbard models for the hydrogen chain using sliced-basis density matrix renormalization group

Sliced-basis DMRG(sb-DMRG) is used to simulate a chain of hydrogen atoms and to construct low-energy effective Hubbard-like models. The downfolding procedure first involves a change of basis to a set of atom-centered Wannier functions constructed from the natural orbitals of the exact DMRG one-particle density matrix. The Wannier function model is then reduced to a fewer-parameter Hubbard-like model, whose parameters are determined by minimizing the expectation value of the Wannier Hamiltonian in the ground state of the Hubbard Hamiltonian. This indirect variational procedure not only yields compact and simple models for the hydrogen chain, but also allows us to explore the importance of constraints in the effective Hamiltonian, such as the restricting the range of the single-particle hopping and two-particle interactions, and to assess the reliability of more conventional downfolding. The entanglement entropy for a model's ground state, cut in the middle, is an important property determining the ability of DMRG and tensor networks to simulate the model, and here we study its variation with the range of the interactions. Counterintuitively, we find that shorter ranged interactions often have larger entanglement.

36 MATERIALS SCIENCE↗

The Physical Nature of Subdwarf A Stars: White Dwarf Impostors

We address the physical nature of subdwarf A-type (sdA) stars and their possible link to extremely low mass (ELM) white dwarfs (WDs). The two classes of objects are confused in low-resolution spectroscopy. However, colors and proper motions indicate that sdA stars are cooler and more luminous, and thus larger in radius, than published ELM WDs. We demonstrate that surface gravities derived from pure hydrogen models suffer a systematic ∼1 dex error for sdA stars, likely explained by metal line blanketing below 9000 K. A detailed study of five eclipsing binaries with radial velocity orbital solutions and infrared excess establishes that these sdA stars are metal-poor ≃1.2 M {sub ⊙} main sequence stars with ≃0.8 M {sub ⊙} companions. While WDs must exist at sdA temperatures, only ∼1% of a magnitude-limited sdA sample should be ELM WDs. We conclude that the majority of sdA stars are metal-poor A–F type stars in the halo, and that recently discovered pulsating ELM WD-like stars with no obvious radial velocity variations may be SX Phe variables, not pulsating WDs.

79 ASTRONOMY AND ASTROPHYSICS↗

A Correction for GALEX Spectroscopic UV Flux Distributions from Comparisons with CALSPEC and IUE

The CALSPEC database of absolute spectral energy distributions (SEDs) from the Hubble Space Telescope is based on pure hydrogen model atmosphere calculations for three unreddened white dwarf stars and represents the current UV flux calibration standard with a precision approaching 1% for well observed stars. Following our previous work to correct International Ultraviolet Explorer (IUE) fluxes, this paper provides an average correction for the Galaxy Evolution Explorer (GALEX) spectral database that places GALEX fluxes on the current CALSPEC scale. Our correction is derived by comparing GALEX spectroscopic flux distributions with CALSPEC and corrected IUE SEDs. This recalibration is relevant for any project based on GALEX archival spectroscopic data, e.g., UV or multi-wavelength analyses, correlating GALEX spectra with other existing or future databases, and planning of new observations. The recalibration will be applied to our planned catalog of corrected GALEX SEDs.

79 ASTRONOMY AND ASTROPHYSICS↗

HyRAM (Hydrogen Risk Assessment Models) v. 1.0 (alpha)

HyRAM is a software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards (thermal effects from jet fires, thermal pressure effects from deflagrations) on people and structures. HyRAM incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of hydrogen release and flame physics. Version 1.0.0.280 can be used to quantify the likelihood and thermal consequences associated with gaseous hydrogen releases from user-defined hydrogen installations.

Groth, Katrina M.↗

On the tokamak first wall response to the edge localized mode bursts

The effects of wall outgassing on the H-mode pedestal recovery after edge localized mode (ELM) crash is examined with a simplified model of hydrogen adsorption/desorption processes. The parameters governing the dynamics of the wall response to the ELM crash are found. It is shown that within adopted hydrogen adsorption/desorption model a significant impact of the wall outgassing on the pedestal recovery can be observed for the wall surface temperature range between 500 K and 800 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A film-rupture model of hydrogen-induced, slow crack growth in alpha-beta titanium

The appearance of the terrace like fracture morphology of gaseous hydrogen induced crack growth in acicular alpha-beta titanium alloys is discussed as a function of specimen configuration, magnitude of applied stress intensity, test temperature, and hydrogen pressure. Although the overall appearance of the terrace structure remained essentially unchanged, a distinguishable variation is found in the size of the individual terrace steps, and step size is found to be inversely dependent upon the rate of hydrogen induced slow crack growth. Additionally, this inverse relationship is independent of all the variables investigated. These observations are quantitatively discussed in terms of the formation and growth of a thin hydride film along the alpha-beta boundaries and a qualitative model for hydrogen induced slow crack growth is presented, based on the film-rupture model of stress corrosion cracking.

Nelson, H. G.↗

Mechanism of the α-to-β phase transformation in the LaNi 5 -H 2 system

High-energy synchrotron in situ X-ray powder diffraction has been used to elucidate the mechanism of the hydriding phase transformation in a LaNi 5 model hydrogen storage intermetallic in real time. The transformation proceeds at 10 ºC via the transient growth of an interfacial phase, the {gamma} phase, with lattice parameters intermediate between those of the α (dilute solid solution) and β (concentrated hydride) phases. The γ phase forms to partially accommodate the 24% change in unit cell volume between the α and β phases during hydriding and dehydriding. The α, γ and β phases coexist at the nanoscopic level.

08 HYDROGEN↗

Multisite Proton–Coupled Electron Transfer at a Keggin-Type Polyoxotungstate

Proton−coupled electron transfer (PCET) governs many redox transformations, but is thermodynamically constrained when proton and electron transfer occur at a single site. Here, we introduce a new multisite PCET (MSPCET) platform, based on the Keggin-type polyoxotungstate, [VW 12 O 40 ] 3− (VW 12 ). Pairing VW 12 with either Brønsted bases or acids yields reagent pairs with tunable effective bond dissociation free energies (BDFE eff ) over 15 kcal mol −1 , enabling both oxidative and reductive H atom transfer reactions. Kinetic studies on the oxidative pathway by using 2,4,6- t Bu 3 PhOH as a model hydrogen atom (H atom) donor reveal a product-like, entropy-dominated concerted proton−electron transfer (CPET) pathway from a preorganized hydrogen-bonded complex. By contrast, reductive H atom transfer reactions exhibit larger ΔH ‡ values, measurable kinetic isotope effects, and balanced Brønsted slope, consistent with synchronous CPET-type mechanism. Extension to N−H, O−H, and C−H substrates demonstrates the versatility of the VW 12 MS-PCET platform for tunable (de)hydrogenation.

Charge transfer↗

Stability of shock waves in high temperature plasmas

The Dyakov-Kontorovich criteria for spontaneous emission of acoustic waves behind shock fronts are investigated for high temperature aluminum and beryllium plasmas. To this end, the Dyakov and critical stability parameters are calculated from Rankine-Hugoniot curves using a more realistic equation of state (EOS). The cold and ionic contributions to the EOS are obtained via scaled binding energy and mean field theory, respectively. A screened hydrogenic model, including l-splitting, is used to calculate the bound electron contribution to the electronic EOS. The free electron EOS is obtained from Fermi-Dirac statistics. Predictions of the model for ionization curves and shock Hugoniot are found to be in excellent agreement with available experimental and theoretical data. It is observed that the electronic EOS has significant effect on the stability of the planar shock front. While the shock is stable for low temperatures and pressures, instability sets in as temperature rises. The basic reason is ionization of electronic shells and consequent increase in electronic specific heat. The temperatures and densities of the unstable region correspond to those where electronic shells get ionized. With the correct modeling of bound electrons, we find that shock instability for Al occurs at a compression ratio {approx}5.4, contrary to the value {approx}3 reported in the literature. Free electrons generated in the ionization process carry energy from the shock front, thereby giving rise to spontaneously emitted waves, which decay the shock front.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE EXCITATION AND FORMATION OF CIRCUMSTELLAR FULLERENES

We compare and analyze the Spitzer mid-infrared spectrum of three fullerene-rich planetary nebulae in the Milky Way and the Magellanic Clouds: Tc1, SMP SMC 16, and SMP LMC 56. The three planetary nebulae share many spectroscopic similarities. The strongest circumstellar emission bands correspond to the infrared active vibrational modes of the fullerene species C{sub 60} and little or no emission is present from polycyclic aromatic hydrocarbons. The strengths of the fullerene bands in the three planetary nebulae are very similar, while the ratios of the [Ne III]15.5 {mu}m/[Ne II]12.8 {mu}m fine structure lines, an indicator of the strength of the radiation field, are markedly different. This raises questions about their excitation mechanism and we compare the fullerene emission to fluorescent and thermal models. In addition, the spectra show other interesting and common features, most notably in the 6-9 {mu}m region, where a broad plateau with substructure dominates the emission. These features have previously been associated with mixtures of aromatic/aliphatic hydrocarbon solids. We hypothesize on the origin of this band, which is likely related to the fullerene formation mechanism, and compare it with modeled hydrogenated amorphous carbon that present emission in this region.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiconfiguration time-dependent Hartree approach for electron-nuclear correlation in strong laser fields

The multiconfiguration time-dependent Hartree approach is applied to study the electron-nuclear correlation in the dynamics of molecules subject to strong external laser fields, using the example of a model hydrogen molecular ion. The ground state of the system is well described by as few as two single-particle functions per degree of freedom. A significantly larger but moderate number of configurations is required to predict laser-induced fragmentation probabilities and high-order harmonic generation spectra accurately, showing that the correlation between electronic and nuclear degree of freedom is strongly increased by the presence of the laser field.

74 ATOMIC AND MOLECULAR PHYSICS↗

Techno-economic Model and Analysis for Hydrogen (H2) Pipeline Transportation

Presentation at the 9th ELAEE (Latin American Energy Economics Meeting) July 28th – 30th, 2024 in PUC-Rio, Rio de Janeiro, Brazil. The presentation highlights the FECM/NETL Hydrogen Pipeline Cost Model (H2_P_COM). The model estimates costs for transporting gaseous hydrogen in a pipeline from a source, such as a hydrogen production facility, to a final destination which may be a user of the hydrogen or a distribution center where hydrogen in the pipeline is diverted to multiple end users.

Cunha, Luciane↗

Development of a Turnkey Hydrogen Fueling Station Final Report

The transition to hydrogen as a fuel source presents several challenges. One of the major hurdles is the cost-effective production of hydrogen in small quantities (less than 1MMscf/month). In the early demonstration phase, hydrogen can be provided by bulk distribution of liquid or compressed gas from central production plants; however, the next phase to fostering the hydrogen economy will likely include onsite generation and extensive pipeline networks to help effect a pervasive infrastructure. Providing inexpensive hydrogen at a fleet operator’s garage or local fueling station is a key enabling technology for direct hydrogen Fuel Cell Vehicles (FCVs). The objective of this project was to develop a comprehensive, turnkey, stand-alone, commercial hydrogen fueling station for FCVs with state-of-the-art technology that is cost-competitive with current hydrocarbon fuels. Such a station would promote the advent of the hydrogen fuel economy for buses, fleet vehicles, and ultimately personal vehicles. Air Products, partnering with the U.S. Department of Energy (DOE), The Pennsylvania State University, Harvest Energy Technology, and QuestAir, developed a turnkey hydrogen fueling station on the Penn State campus. Air Products aimed at designing a station that would have 65% overall station efficiency, 82% PSA (pressure swing adsorption) efficiency, and the capability of producing hydrogen at $3.00/kg (gge) H2 at mass production rates. Air Products designed a fueling station at Penn State from the ground up. This project was implemented in three phases. The first phase evaluated the various technologies available in hydrogen generation, compression, storage, and gas dispensing. In the second phase, Air Products designed the components chosen from the technologies examined. Finally, phase three entailed a several-month period of data collection, full-scale operation, maintenance of the station, and optimization of system reliability and performance. Based on field data analysis, it was determined by a proprietary hydrogen-analysis model that hydrogen produced from the station at a rate of 1500 kg/day and when produced at 1000 stations per year would be able to deliver hydrogen at a price of $3.03/kg (gge) H2. The station’s efficiency was measured to be 65.1%, and the PSA was tested and ran at an efficiency of 82.1%, thus meeting the project targets. From the study, it was determined that more research was needed in the area of hydrogen fueling. The overall cost of the hydrogen energy station, when combined with the required plot size for scaled-up hydrogen demands, demonstrated that a station using steam methane reforming technology as a means to produce on–site hydrogen would have limited utility in the marketplace. Alternative hydrogen supplies, such as liquid or pipeline delivery to a refueling station, need to be included in the exploration of alternative energy site layouts. These avenues need to be explored before a definitive refueling station configuration and commercialization pathway can be determined.

08 HYDROGEN↗