Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Assessment of the Sentinel-6Michael Frielich extension to the TOPEX/Jason Sea Surface Height Climate Data Record referenced to ITRF2020

The recent launch of Sentinel-6 Michael Freilichoffers the possibility of continuing global mean sea level (GMSL) monitoring well into the currentdecade. In this presentation we report Sentinel-6/Jason-3inter-mission bias estimates based on direct sea surface height (SSH) collinear differences of near coincident measurements during the verification phase, and with comparisons to a global network of tide gauges. In an effort to provide a more consistent SSH time series and seamlesstransition to Sentinel-6, we have generated orbits for the entire time span based on the revised ITRF2020terrestrial reference frame.We reportthe efficacy ofcorrection algorithm revisions leading to the development of the NASA MEaSURE’s V6.0 sea surface height Climate Data Record(MEaSUREs -Integrated Multi-Mission Ocean Altimeter Data for Climate Research (MEaSUREs-SSH) | PO.DAAC / JPL / NASA).We provide an assessment of recent improvements to the accuracy of the 30+ year sea surface height time series, describe continuing calibration/validation activities, and evaluate the subsequent impact on current global mean sea level estimates, and the accounting of the ocean mass budget.

B D Beckley↗
NASA NTRSDate not supplied

The Global Water Monitor: Wetland surface height dynamics for Ecology, Conservation, and Resource Management

The Global Water Monitor (GWM) offers surface water-related products for lakes, river reaches and wetland zones. The surface elevation change products are derived from satellite radar altimeters, such as the Jason/Sentinel series, and can span multiple decades. While the current instruments are profiling, they offer surface water height at specific locations, thus contributing to parallel observation of wetland surface water extent. GWM wetland products are “operational” with routine updates within 1-2days of satellite overpass. There is also assurance of product continuity to at least the end of 2030. Currently, the GWM holds products for a small selection (~40) of diverse wetlands for objectives that focus on conservation and water/fisheries resource monitoring. These sites have been requested by various organizations also looking to the effects of climate change and anthropogenic influences. Many of the current GWM wetland regions are in National Parks such as the Everglades (USA), the Wasur (Rep. Indonesia), and the Kakadu marshes (Australia). They also include coastal river deltas of the Danube, Mekong, Amazon, Orinoco and Ganges Rivers, and the internal Okavango Delta in Botswana. The preliminary set also ensures a diverse range of wetlands e.g., the shallow pot-hole lake region of the Sand Hills and the coastal Black Swamp of the USA, the peat fields of Malaysia and rice growing fields of Yilinzhen in China. Extensive wetlands in Brazil (the Pantanal), South Sudan (the Sudd Marshes) and Belarus (the Pinsk) are also featured, as are the mangrove regions of the Sundarbans (India) and the Laguna Terminos (Mexico). The Usangu wetland (Tanzania) is also included, a focus region where wetland ecology strongly competes with demands from irrigation, livestock, and the needs of downstream hydro-electric power. The nadir-pointing altimeter instruments record height variations regardless of vegetation or canopy cover, and height dynamics at 10-day or monthly resolution reveal seasonal and inter-annual variations as well as longer-term declining or re-charging trends. These products provide a unique, multi-decadal data set that can stand-alone or serve with cross-validation or image-fusion efforts.

Charon Birkett↗
NASA NTRSDate not supplied

Modeling and Simulation Credibility Assessment of Finite Element Models for Fall From Heights Injury Scenarios

Finite element (FE) computational models of the whole human body are being used to investigate the injury modalities and mechanisms arising from suited astronauts’ ExtraVehicular Activities (EVAs). These FE whole body models – simplified Elemance and THUMS pedestrian versions – have undergone a series of verification and validation (V&V) assessments for applications in automotive, domestic, and contact sports arenas. However, the FE models’ Modeling and Simulation (M&S) credibility assessments for simulating suited astronaut injuries due to fall from heights in altered gravity environments are limited. The current study evaluates the M&S credibility of simplified Elemance and THUMS pedestrian FE models based on eight credibility factors – data pedigree, input pedigree, code verification, solution verification, conceptual validation, referent validation, results uncertainty, and results robustness – as per NASA-STD-7009A [1]. These credibility factors were assigned ordinal scores ranging between 0 to 4, with a score of 0 in the case of insufficient evidence and 4 when all data for the model is known, used appropriately, and traceable to the Real-World System (RWS) with acceptable accuracy, precision, and uncertainty. The credibility factor sufficiency thresholds were assigned upon guidance from NASA EVA subject matter experts. The factor scores were ascertained through the evaluation of M&S credibility assessment procedures described in the published literature and FE model reports. The M&S credibility scores for the Elemance and THUMS FE models vary between 1 and 3 for data pedigree, input pedigree, and referent validation credibility factors, and between 0 and 1 for code verification, solution verification, conceptual validation, results uncertainty and results robustness. The results show that these FE models are credible for simulating fall from heights injury scenarios in specific kinematic and kinetic ranges that correlate with highway and contact sports-related external conditions. Multiple credibility elevation strategies are prescribed to improve the Elemance and THUMS models’ credibility for use in the EVA fall from height injury scenarios.

R A Perkins↗
NASA NTRS2011

High Temperature Monitoring the Height of Condensed Water in Steam Pipes

An in-service health monitoring system is needed for steam pipes to track through their wall the condensation of water. The system is required to measure the height of the condensed water inside the pipe while operating at temperatures that are as high as 250 deg. C. The system needs to be able to make real time measurements while accounting for the effects of cavitation and wavy water surface. For this purpose, ultrasonic wave in pulse-echo configuration was used and reflected signals were acquired and auto-correlated to remove noise from the data and determine the water height. Transmitting and receiving the waves is done by piezoelectric transducers having Curie temperature that is significantly higher than 250 deg. C. Measurements were made at temperatures as high as 250 deg. C and have shown the feasibility of the test method. This manuscript reports the results of this feasibility study.

fluid height monitoring↗
NASA NTRS1998

Geometric Retrieval of Cloud Top Height from MISR Imagery

This paper presents the above three processing steps starting from an accurate and efficient project of multi-angle MISR image data to the ellipsoid surface, followed by a mathematical derivation which separates the cloud motion and height, and finally an automatic image matching and ray intersection algorithm for high resolution cloud top height retrieval.

Image↗
NASA NTRS2020

The Relationship Between MAIAC Smoke Plume Heights and Surface PM

Biomass burning is a source of fine particulate matter (PM2.5) air pollution, which adversely impacts human health. However, quantifying the health effects from biomass burning PM2.5 is difficult. Monitoring networks generally lack the spatial density needed to capture the heterogeneity of biomass burning smoke. Satellite aerosol optical depth (AOD) can be used to fill spatial gaps but does not distinguish surface‐level aerosols. Plume height (PH) observations may provide constraints on the vertical distribution of smoke and its impact on surface concentrations. We assessed PH characteristics from Multi‐Angle Implementation of Atmospheric Correction (MAIAC) and evaluated its correlation with colocated PM2.5 and AOD measurements. PH is generally highest over the western United States. The ratio PM2.5:AOD generally decreases with increasing PH:PBLH (planetary boundary layer height), showing that PH has the potential to refine surface PM2.5 estimates for collections of smoke events.

satellite retrieved smoke plume heights↗
NASA NTRS1966

Scanning photometer system automatically determines atmospheric layer height

Two photometers, placed a given distance apart, determine the height of nonuniform luminous layers in a synchronous manner. Photometer outputs are correlated by a simple analog correlation computer to automatically give the luminous layer height. This system is used to determine visibility ceilings at airports.

Wolff, M.↗
NASA NTRS1971

Determination of stratospheric temperature and height gradients from nimbus 3 radiation data

To improve the specification of stratospheric horizontal temperature and geopotential height fields from satellite radiation data, needed for high flying aircraft, a technique was derived to estimate data between satellite tracks using interpolated IRIS 15-micron data from Nimbus III. The interpolation is based on the observed gradients of the MRIR 15-micron radiances between subsatellite tracks. The technique was verified with radiosonde data taken within 6 hours of the satellite data. The sample varied from 1126 pairs at low levels to 383 pairs at 10 mb using northern hemisphere data for June 15 to July 20, 1969. The data were separated into five latitude bands. The Rms temperature differences were generally from 2 to 5 C for all levels above 300 mb. From 500 to 300 mb RMS differences vary from 4 to 9C except at high latitudes which show values near 3C. The RMS differences between radiosonde heights and those calculated hydrostatically from the surface were from 30 to 280 meters increasing from the surface to 10 mb. Integration starting at 100 mb reduced the RMS difference in the stratosphere to 20 to 120 meters from 70 to 10 mb. From a comparison with actual operational maps at 50 and 10 mb, it appears the techniques developed produce analyses in general agreement with those from radiosonde data. In addition, they are able to indicate details over areas of sparse data not shown by conventional techniques.

Nicholas, G. W.↗
NASA NTRS1972

Determination of ILS category 2 decision height window requirements

A method for determining the appropriate longitudinal and lateral decision height dispersion limits for any airplane/control system combination during an instrument landing approach is presented. An example is worked out to clarify the steps required. It is shown that the current longitudinal decision height dispersion limits are well suited for a DC-8 with the example control system, but that the lateral limits are too loose to guarantee acceptable touchdowns with the example system subjected to recommended wind and shear disturbances.

Johnson, W. A.↗
NASA NTRS1972

Laboratory and field evaluation of an underwater sand height gage

An underwater sand height gage was investigated. This instrument consisted of two transducers, one screened and one unscreened. Laboratory experimentation included static and dynamic tests with three test sands--fine, medium, and coarse. Field tests were conducted at Rudee Inlet, Virginia Beach, Virginia. Test results showed a linear response to up to 10 inches of sand loading. Deviation observed in identical tests appeared to be due to variation in the density of sand. Density differences reflected varying packing styles which, in turn, were a consequence of grain size and flow regime. Further evaluations of the sand height gage reflect this instrument's potential.

Swift, D. J. P.↗
NASA NTRS1972

Correlation techniques and measurements of wave-height statistics

Statistical measurements of wave height fluctuations have been made in a wind wave tank. The power spectral density function of temporal wave height fluctuations evidenced second-harmonic components and an f to the minus 5th power law decay beyond the second harmonic. The observations of second harmonic effects agreed very well with a theoretical prediction. From the wave statistics, surface drift currents were inferred and compared to experimental measurements with satisfactory agreement. Measurements were made of the two dimensional correlation coefficient at 15 deg increments in angle with respect to the wind vector. An estimate of the two-dimensional spatial power spectral density function was also made.

Guthart, H.↗
NASA NTRS1972

Mixing-height measurement by lidar, particle counter, and rawinsonde in the Williamette Valley, Oregon

The feasibility of using laser radar (lidar) to measure the spatial distribution of aerosols and water vapor in the earth's mixing or boundary layer is shown. From these data the important parameter of actual mixing height was determined, that is, the maximum height to which particulate pollutants actually mix. Data are shown for simultaneous lidar, rawinsonde, and aircraft-mounted condensation nuclei counter and temperature measurements. The synoptic meteorology is also presented. The Williamette Valley, Oregon, was chosen for the measurements because of its unique combination of meteorology, terrain, and pollutant source, along with an ongoing Oregon State University study of the natural ventilation of this valley.

Mccormick, M. P.↗
NASA NTRS1973

Effect of parallactic refraction correction on station height determination

The effect of omitting the parallactic refraction correction for satellite optical observations in the determination of station coordinates is analyzed for a large satellite data distribution. A significant error effect is seen in station heights. A geodetic satellite data distribution of 23 close earth satellites, containing 30,000 optical observations obtained by 13 principal Baker-Nunn camera sites, is employed. This distribution was used in a preliminary Goddard Earth Model (GEM 1) for the determination of the gravity field of the earth and geocentric tracking station locations. The parallactic refraction correction is modeled as an error on the above satellite data and a least squares adjustment for station locations is obtained for each of the 13 Baker-Nunn sites. Results show an average station height shift of +8 meters with a dispersion of plus or minus 0.7 meters for individual sites. Station latitude and longitude shifts amounted to less than a meter. Similar results are obtained from a theoretical method employing a probability distribution for the satellite optical observations.

Lerch, F. J.↗
NASA NTRS1973

Neutral thermosphere temperatures from density scale height measurements.

During each 4-min satellite interrogation period the Explorer 32 density gages measured the atmospheric density approximately every 2 sec. Over certain segments of the satellite orbit these measurements determined the neutral atmospheric density scale height. The scale heights measured at an altitude of 400 (plus or minus 50) km have been analyzed to infer thermospheric temperatures. The results confirm an earlier conclusion from the density data of the same experiment that the diurnal temperature variation is latitude dependent.

Newton, G. P.↗
NASA NTRS1973

Two frequency radar interferometry applied to the measurement of ocean wave height.

Description of a technique for measuring the rms wave height averaged over an area of the sea that is much greater than any horizontal scale of the surface waves. The measurement method involves a nadir looking radar that transmits and receives two continuous monochromatic signals simultaneously. Signal processing at the receiver requires the computation of a correlation function which is shown to depend only on the statistical rms surface elevation of specular points and not on the temporal or spatial frequency spectrum of the wave height or slope. Laboratory measurements have been conducted on wind driven waves, and the measured correlation function compares favorably with the underlying theory.

Weissman, D. E.↗
NASA NTRS1974

Cloud top height variability of strong convective cells

Cloud top height variability of cloud domes above the cirrostratus anvil was investigated for two severe local storm occurrences over Texas on May 12 and 13, 1972. Twenty-three domes were monitored and the average maximum height was 1.6 km above the anvil. It was estimated that a dome would take a maximum of about 6 min to grow from the anvil level to peak altitude based on measurements over the last 2 min of the growth period when the upward vertical velocity averaged 4 m/sec. The extreme vertical growth rate was 27 m/sec for a 30-sec period. This vertical growth rate compared with a range of 11.4-19.4 m sec determined from a method of estimating vertical motions based on laboratory measurements. Average dome collapse was at the same rate as the average ascent for the first 90 sec after the maximum altitude was reached.

Shenk, W. E.↗
NASA NTRS1975

Height of helium emission in the chromosphere

Filtergrams of the limb show the He I D3 chromosphere as a shell which is separated from the limb by a gap. The height of maximum D3 contribution occurs at about 1350 km above the limb and is independent of the intensity of the D3 emission. We interpret this effect as the height to which coronal EUV radiation is capable of penetrating the atmosphere.

Pope, T.↗