Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARDNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Identification of the Hard X-Ray Source Dominating the E > 25 keV Emission of the Nearby Galaxy M31

We report the identification of a bright hard X-ray source dominating the M31 bulge above 25 kiloelectronvolts from a simultaneous NuSTAR-Swift observation. We find that this source is the counterpart to Swift J0042.6+4112, which was previously detected in the Swift BAT All-Sky Hard X-Ray Survey. This Swift BAT source had been suggested to be the combined emission from a number of point sources; our new observations have identified a single X-ray source from 0.5 to 50 kiloelectronvolts as the counterpart for the first time. In the 0.5-10 kiloelectronvolt band, the source had been classified as an X-ray Binary candidate in various Chandra and XMM-Newton studies; however, since it was not clearly associated with Swift J0042.6+4112, the previous E is less than 10 kiloelectronvolts observations did not generate much attention. This source has a spectrum with a soft X-ray excess (kT approximately equal to 0.2 kiloelectronvolts) plus a hard spectrum with a power law of gamma approximately equal to 1 and a cutoff around 15-20 kiloelectronvolts, typical of the spectral characteristics of accreting pulsars. Unfortunately, any potential pulsation was undetected in the NuSTAR data, possibly due to insufficient photon statistics. The existing deep HST (Hubble Space Telescope) images exclude high-mass (greater than 3 times the radius of the moon) donors at the location of this source. The best interpretation for the nature of this source is an X-ray pulsar with an intermediate-mass (less than 3 times the radius of the moon M) companion or a symbiotic X-ray binary. We discuss other possibilities in more detail.

galaxies: bulges – galaxies: individual (M31)↗
NASA NTRS2016

NuSTAR Hard X-Ray Survey of the Galactic Center Region. II. X-Ray Point Sources

We present the first survey results of hard X-ray point sources in the Galactic Center (GC) region by NuSTAR. We have discovered 70 hard (3-79 keV) X-ray point sources in a 0.6 deg(sup 2) region around SgrA* with a total exposure of 1.7 Ms, and 7 sources in the Sgr B2 field with 300 ks. We identify clear Chandra counterparts for 58 NuSTAR sources and assign candidate counterparts for the remaining 19. The NuSTAR survey reaches X-ray luminosities of approx. 4× and approx. 8 ×10(exp 32) erg/s at the GC (8 kpc) in the 3-10 and 10-40 keV bands, respectively. The source list includes three persistent luminous X-ray binaries (XBs) and the likely run-away pulsar called the Cannonball. New source-detection significance maps reveal a cluster of hard (>10 keV) X-ray sources near the Sgr A diffuse complex with no clear soft X-ray counterparts. The severe extinction observed in the Chandra spectra indicates that all the NuSTAR sources are in the central bulge or are of extragalactic origin. Spectral analysis of relatively bright NuSTAR sources suggests that magnetic cataclysmic variables constitute a large fraction (>40%-60%). Both spectral analysis and logN-logS distributions of the NuSTAR sources indicate that the X-ray spectra of the NuSTAR sources should have kT > 20 keV on average for a single temperature thermal plasma model or an average photon index of Lambda = 1.5-2 for a power-law model. These findings suggest that the GC X-ray source population may contain a larger fraction of XBs with high plasma temperatures than the field population.

center - X-rays: binaries - diffuse background↗
NASA NTRS2017

Luminosity-dependent Changes of the Cyclotron Line Energy and Spectral Hardness in Cepheus X-4

Context. X-ray spectra of accreting pulsars are generally observed to vary with their X-ray luminosity. In particular, the hardness of the X-ray continuum is found to depend on luminosity. In a few sources, the correlation between the energy of the cyclotron resonance scattering feature (CRSF) and the luminosity is clear. Different types (signs) of the correlation are believed to reflect different accretion modes. Aims. We analyse two NuSTAR observations of the transient accreting pulsar Cep X-4 during its 2014 outburst. Our analysis is focused on a detailed investigation of the dependence of the CRSF energy and of the spectral hardness on X-ray luminosity, especially on short timescales. Methods. To investigate the spectral changes as a function of luminosity within each of the two observations, we used the intrinsic variability of the source on the timescale of individual pulse cycles (tens of seconds), the so-called pulse-to-pulse variability. Results. We find that the NuSTAR spectrum of Cep X-4 contains two CRSFs: the fundamental line at ~30 keV and its harmonic at ~55 keV. We find for the first time that the energy of the fundamental CRSF increases and the continuum becomes harder with increasing X-ray luminosity not only between the two observations, that is, on the long timescale, but also within an individual observation, on the timescale of a few tens of seconds. We investigate these dependencies in detail including their non-linearity. We discuss a possible physical interpretation of the observed behaviour in the frame of a simple one-dimensional model of the polar emitting region with a collisionless shock formed in the infalling plasma near the neutron star surface. With this model, we are able to reproduce the observed variations of the continuum hardness ratio and of the CRSF energy with luminosity.

Vybornov, V.↗
NASA NTRS2017

Identification of the Hard X-Ray Source Dominating the E>25 keV Emission of the Nearby Galaxy M31

We report the identification of a bright hard X-ray source dominating the M31 bulge above 25 keV from a simultaneous NuSTAR-Swift observation. We find that this source is the counterpart to Swift J0042.6+4112, which was previously detected in the Swift BAT All-sky Hard X-ray Survey. This Swift BAT source had been suggested to be the combined emission from a number of point sources; our new observations have identified a single X-ray source from 0.5 to 50 keV as the counterpart for the first time. In the 0.5-10 keV band, the source had been classified as an X-ray Binary candidate in various Chandra and XMM-Newton studies; however, since it was not clearly associated with Swift J0042.6+4112, the previous E<10 keV observations did not generate much attention. This source has a spectrum with a soft X-ray excess (kT ∼ 0.2 keV) plus a hard spectrum with a power law of G ~ 1 and a cutoff around 15-20 keV, typical of the spectral characteristics of accreting pulsars. Unfortunately, any potential pulsation was undetected in the NuSTAR data, possibly due to insufficient photon statistics. The existing deep HST images exclude high-mass (>3 solar mass) donors at the location of this source. The best interpretation for the nature of this source is an X-ray pulsar with an intermediate-mass (<3 solar mass) companion or a symbiotic X-ray binary. We discuss other possibilities in more detail.

Yukita, M.↗
NASA NTRS2018

A Simple, Velocity Dependent, Collision Probability Algorithm for Small Combined Hard Body Radii Close Approach Events

Over the last few years progress has been made in the velocity dependent collision probability problem. Recent progress in this problem has been approached via integration of the probability flux into the surface of the combined hard body object. The algorithm presented uses the surface flux approach and is designed to compute the collision probability rate between two objects given their time dependent states and state error covariance matrices. With regards to the computation of the collision probability (Pc) rate, two major differences exist between the development of this algorithm and the usual Pc algorithm. First, the shape of the at-risk volume is assumed to be a cube rather than a sphere. The size of the cube is chosen so that it circumscribes the usual hard body sphere chosen for the spherical Pc problem. This will result in half the length of a side of the cube being equal to the hard body radius (HBR) of the sphere. Second, it is assumed that the HBR of the cube is much smaller than the smallest combined position uncertainty (σ(sub min) > 5*HBR) at each time point of evaluation. This is necessary as the actual collision probability calculation is based on a first order, small variable expansion in the position components of the Gaussian probability density function. This leads to the collision probability rate being to second order in the combined HBR. The collision probability rate is in a concise, closed form containing exponential and error functions.

Frisbee, Joe↗
NASA NTRS2018

A NICER Look at the Aql X-1 Hard State

We report on a spectral-timing analysis of the neutron star low-mass X-ray binary(LMXB)AqlX-1 with the Neutron Star Interior Composition Explorer (NICER) on the International Space Station (ISS). AqlX-1 wasobserved with NICER during a dim outburst in 2017 July, collecting approximately 50 ks of good exposure. The spectral and timing properties of the source correspond to that of a (hard) extreme island state in the atoll classification. We find that the fractional amplitude of the low-frequency (<0.3Hz) band-limited noise shows adramatic turnover as a function of energy: it peaks at 0.5keV with nearly 25% rms, drops to 12% rms at 2keV,and rises to 15% rms at 10keV. Through the analysis of covariance spectra, we demonstrate that band-limited noise exists in both the soft thermal emission and the power-law emission. Additionally, we measure hard timelags, indicating the thermal emission at 0.5keV leads the power-law emission at 10 keV on a timescale of 100ms at 0.3Hz to10ms at 3Hz. Our results demonstrate that the thermal emission in the hard state is intrinsically variable, and is driving the modulation of the higher energy power-law. Interpreting the thermal spectrum as disk emission, we find that our results are consistent with the disk propagation model proposed for accretion onto black holes.

Bult, Peter↗
NASA NTRS2022

The Long-stable Hard State of XTE J1752-223 and the Disk Truncation Dilemma

The degree to which the thin accretion disks of black hole X-ray binaries are truncated during hard spectral states remains a contentious open question in black hole astrophysics. During its singular observed outburst in 2009–2010, the black hole X-ray binary XTE J1752−223 spent ∼1 month in a long-stable hard spectral state at a luminosity of ∼0.02–0.1 L Edd . It was observed with 56 RXTE pointings during this period, with simultaneous Swift-XRT daily coverage during the first 10 days of the RXTE observations. While reflection modeling has been extensively explored in the analysis of these data, there is disagreement surrounding the geometry of the accretion disk and corona implied by the reflection features. We reexamine the combined, high signal-to-noise, simultaneous Swift and RXTE observations, and perform extensive reflection modeling with the latest relxill suite of reflection models, including newer high disk density models. We show that reflection modeling requires that the disk be within ∼5 R ISCO during the hard spectral state, while weaker constraints from the thermal disk emission imply higher truncation (Rin = 6–80 R ISCO ). We also explore more complex coronal continuum models, allowing for two Comptonization components instead of one, and show that the reflection features still require only a mildly truncated disk. Finally we present a full comparison of our results to previous constraints found from analyses of the same data set.

Accretion↗
NASA NTRS2009

HX-POL-A Balloon-Borne Hard X-Ray Polarimeter

We report on the design and estimated performance of a balloon-borne hard X-ray polarimeter called HX-POL. The experiment uses a combination of Si and Cadmium Zinc Telluride detectors to measure the polarization of 50 keV-400 keV X-rays from cosmic sources through the dependence of the angular distribution of Compton scattered photons on the polarization direction. On a one-day balloon flight, HX-POL would allow us to measure the polarization of bright Crab-like sources for polarization degrees well below 10%. On a longer (15-30 day) flight from Australia or Antarctica, HX-POL would be be able to measure the polarization of bright galactic X-ray sources down to polarization degrees of a few percent. Hard X-ray polarization measurements provide unique venues for the study of particle acceleration processes by compact objects and relativistic outflows. In this paper, we discuss the overall instrument design and performance. Furthermore, we present results from laboratory tests of the Si and CZT detectors. Index Terms Gamma-ray astronomy, gamma-ray astronomy detectors, polarization, semiconductor radiation detectors, X-ray astronomy, X-ray astronomy detectors.

Krawczynski, H.↗
NASA NTRS2010

GaN-Based High Temperature and Radiation-Hard Electronics for Harsh Environments

We develop novel GaN-based high temperature and radiation-hard electronics to realize data acquisition electronics and transmitters suitable for operations in harsh planetary environments. In this paper, we discuss our research on metal-oxide-semiconductor (MOS) transistors that are targeted for 500 (sup o)C operation and >2 Mrad radiation hardness. For the target device performance, we develop Schottky-free AlGaN/GaN MOS transistors, where a gate electrode is processed in a MOS layout using an Al2O3 gate dielectric layer....

AlGaN/GaN↗
NASA NTRS2012

Characterization of New Hard X-ray Cataclysmic Variables

Aims. We aim at characterizing a sample of nine new hard X-ray selected Cataclysmic Variable (CVs), to unambiguously identify them as magnetic systems of the Intermediate Polar (IP) type. Methods. We performed detailed timing and spectral analysis by using X-ray, and simultaneous UV and optical data collected by XMM−Newton, complemented with hard X-ray data provided by INTEGRAL and Swift. The pulse arrival time were used to estimate the orbital periods. The broad band X-ray spectra were fitted using composite models consisting of different absorbing columns and emission components. Results. Strong X-ray pulses at the White Dwarf (WD) spin period are detected and found to decrease with energy. Most sources are spin-dominated systems in the X-rays, though four are beat dominated at optical wavelengths. We estimated the orbital period in all system (except for IGR J16500-3307), providing the first estimate for IGRJ08390-4833, IGRJ18308-1232, and IGR J18173-2509. All X-ray spectra are multi-temperature. V2069 Cyg and RX J0636+3535 poses a soft X-ray optically thick component at kT approx. 80 eV. An intense K (sub alpha) Fe line at 6.4 keV is detected in all sources. An absorption edge at 0.76 keV from OVII is detected in IGR J08390-4833. The WD masses and lower limits to the accretion rates are also estimated. Conclusions. We found all sources to be IPs. IGR J08390-4833, V2069 Cyg, and IGR J16500-3307 are pure disc accretors, while IGR J18308-1232, IGR J1509-6649, IGR J17195-4100, and RX J0636+3535 display a disc-overflow accretion mode. All sources show a temperature gradient in the post-shock regions and a highly absorbed emission from material located in the pre-shock flow which is also responsible for the X-ray pulsations. Reflection at the WD surface is likely the origin of the fluorescent iron line. There is an increasing evidence for the presence of a warm absorber in IPs, a feature that needs future exploration. The addition of two systems to the subgroup of soft X-ray IPs confirms a relatively large (∼ 30%) incidence.

hard X-ray↗
NASA NTRSDate not supplied

Influence of Feed Rate on Microstructure and Hardness of Conventionally Spun-formed Al 6061-O Plate

The effect of feed rate on the mechanical properties and microstructure of a 7.35-mm-thick section from a spin-formed Al 6061 cylinder is investigated via microhardness mapping and electron backscatter diffraction (EBSD) analysis. The through-thickness hardness and microtexture profiles, corresponding to a true thickness strain of ≈ 0.3, are utilized to evaluate microstructural variations that could influence mechanical anisotropy and spin formability. The microhardness data reveal distinct gradients from the outer to the inner mold line that vary with feed rate and may be a function of the level of forming strain in the material. The microtextural mapping data expose a minor influence from feed rate, but contain trends through the material cross-section that suggest variations in the location-dependent stress states. The results demonstrate for the first time that the relationship between spin forming deformation and hardness or texture variations can be exploited to optimize processing parameters and mechanical response.

Spin forming↗
NASA NTRS1972

Long-term temporal variations of the hard X-ray flux from the Centaurus region.

An X-ray telescope aboard OSO 3 observed the Centaurus region daily from October 1967 to February 1968, and also for five days in June 1968. For this period, we derive a stable minimum flux of 0.33 plus or minus 0.33 photons per sq cm per sec between 7.7 and 38 keV from a persistent hard X-ray source around 305 deg longitude. Several single days show enhanced fluxes; and two extensive flaring episodes, one with a soft and the other with a very hard spectrum, last at least 10 days.

Schwartz, D. A.↗
NASA NTRS1973

SCO X-1: Origin of the radio and hard X-ray emissions

The consequences of models for the central radio source and the hard X-ray ( 30 keV) emitting region in Sco X-1 are examined. It was found that the radio emission could result from noncoherent synchrotron radiation and that the X-rays may be produced by bremsstrahlung. It is shown that both mechanisms require a mass outflow from Sco X-1. The radio source is located at r approximately 3x10 to the 12th power cm from the center of the star, and its linear dimensions do not exceed 3x10 to the 13th power cm. The magnetic field in the radio source is on the order of 1 gauss. If the hard X-rays are produced by thermal bremsstrahlung, their source is located at 10 to the 9th power approximately r approximately 5x10 to the 9th power cm, the temperature is 2x10 to the 9th power K, and the emission measure is 2x10 to the 56th power/cu cm. This hot plasma loses energy inward by conduction and outward by supersonic expansion. The rates of energy loss for both processes are about 10 to the 36th power erg/s, comparable to the total luminosity of Sco X-1.

Ramaty, R.↗
NASA NTRS1972

Hardness of kamacite and shock histories of 119 meteorites.

Use of metallographic and X-ray diffraction techniques to study the shock histories of 119 iron and stony-iron meteorites, and measurement of the hardness of kamacite in these specimens and in artificially shocked-unannealed and annealed meteorite specimens. Shock increases kamacite hardness, but complications introduced by other physical and chemical properties of meteorites limit its utility as a shock indicator. About 50% of the meteorites studied show evidence for preterrestrial shock loading to pressures of greater than or equal to 130 kb, and 40% have not been shocked to such high pressures. The remaining meteorites have been heat-altered in such a way that their shock histories cannot be determined explicitly. These results, together with those obtained previously, indicate that the plurality, if not the majority, of all iron and stony-iron meteorites sampled by the earth were shocked to pressures of greater than or equal to 130 kb during preterrestrial collisions between asteroidal-sized objects.

Jain, A. V.↗
NASA NTRS1973

He, Ne and Ar in chondritic Ni-Fe as irradiation hardness sensors.

Noble gas analyses of the Ni-Fe of 9 L, 5 H, and 2 LL chondrites quantitatively support previous suggestions of radiogenic He-4 recoil and He-3 deficits. Furthermore, noble gases in the Ni-Fe show evidence for in situ produced radiogenic He-4 and in some cases for recoil loss of Ar-38 and gain of Ne-21. The ratio of spallogenic Ar-38 and Ne-21 in the metal phase is found to correlate strongly with He-3/Ne-21 and Ne-22/Ne-21 in bulk samples of these chondrites. This is proof of the dependence of these ratios on the irradiation hardness experienced by the meteoroid in space. 'Hardness indices' n equals 1.9-2.2 are found, indicating that on the average the stone meteoroids from which the samples came were smaller in mass than iron meteoroids. The spallogenic Ne-21/Ar-38 ratio in metallic Ni-Fe can be used with the semi-empirical production model deduced from the Grant iron meteorite to calibrate spallogenic He-3/Ne-21 and Ne-21/Ar-38 in bulk samples of L, LL and H chondrites for meteoroid size and sample location allowing the estimation of minimal meteoroid masses.

Nyquist, L.↗
NASA NTRS1973

Optical, hard X-ray, and microwave emission during the impulsive phase of flares

A study was made of the variation in hard (E greater than or equal to 10 keV) X-radiation, H-alpha, and microwave emission during the impulsive phase of solar flares. Most important, the observations showed that there is an optical impulsive component in addition to the well-known hard X-ray and microwave spikes. Properties of these H-alpha kernels are given. Further analysis shows that the rise time in the 20- to 32-keV X-ray spike depends on the slope in the electron spectrum. A picture of the impulsive phase is given that is consistent with observations of the three above emissions.

Vorpahl, J. A.↗
NASA NTRS1974

Friction behavior of 304 stainless steel of varying hardness lubricated with benzene and some benzyl structures

The lubricating properties of some benzyl and benzene structures were determined by using 304 stainless steel surfaces strained to various hardness. Friction coefficients and wear track widths were measured with a Bowden-Leben type friction apparatus by using a pin-on-disk specimen configuration. Results obtained indicate that benzyl monosulfide, dibenzyl disulfide, and benzyl alcohol resulted in the lowest friction coefficients for 304 stainless steel, while benzyl ether provided the least surface protection and gave the highest friction. Strainhardening of the 304 stainless steel prior to sliding resulted in reduced friction in dry sliding. With benzyl monosulfide, dibenzyl disulfide, and benzyl alcohol changes in 304 stainless steel hardness had no effect upon friction behavior.

Buckley, D. H.↗