Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “G&C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Investigation of the isoscalar monopole response in the proton-rich nucleus 14 O

Deuteron inelastic scattering on 14 O was measured in inverse kinematics using an active-target time projection chamber and a magnetic spectrograph. The experimental technique enabled precise measurements of deuteron recoiling particles in coincidence with beam-like fragments detected in the spectrograph focal plane. The double differential cross section was reconstructed for scattering angles of 3–6 degrees and excitation energies up to 26 MeV. The monopole strength distribution was obtained from the data using a multipole decomposition analysis. The results were compared to quasiparticle random-phase approximation (QRPA) and generator coordinate method (GCM) calculations. The QRPA calculation accurately describes experimental data in the energy range of 13 to 26 MeV. GCM calculations assuming a 12 C (g . s .) + p + p cluster configuration were used to determine the 0 + strength in 14 O below 13 MeV. The monopole transition strength of these cluster states provides a good description of the experimental distribution in the 9–11 MeV region, while the 0$^{+}_{2}$ state accounts for only a small fraction of the experimental strength around 6 MeV.

Active target↗
NASA NTRS2002

Desulfonatronum paiuteum sp. nov.: A New Alkaliphilic, Sulfate-Reducing Bacterium, Isolated from Soda Mono Lake, California

A novel alkaliphilic, sulfate reducing bacterium strain MLF1(sup T) was isolated from sediments of soda Mono Lake, California. Gram-negative vibrion cells, motile by singular polar flagellum, with sizes 0.5 - 0.6x 1.2 - 2.0 micron occurred singly, in pairs or short spirilla. Growth was observed over the temperature range of +15 C to +48 C (optimum +37 C), NaCl concentration range is greater than 1 - 7 %, wt/vol (optimum 3 %, wt/vol) and pH range 7.8 - 10.5 (optimum pH 9.0 - 9.4). The novel isolate is strictly alkaliphilic, requires high carbonate concentration in medium, obligately anaerobic and catalase negative. As electron donors strain MLF1(sup T) uses hydrogen, formate, ethanol. Sulfate, sulfite, and thiosulfate (but not sulfur or nitrate) can be used as electron acceptors. The sole end product of growth on formate was H2S. Strain MLF1(sup T) is resistant to kanamycin and gentamycin, but sensitive to chloramphenicol and tetracycline. Na2MoO4 inhibits growth of strain MLF1(sup T). The sum of G+C in DNA is 63.1 mol% (by HPLC method). On the basis of physiological and molecular properties, the isolate was considered as novel species of genus Desulfonatronum; and the name Desulfonatronum paiuteum sp. nov., is proposed (type strain MLF1(sup T) = ATCC BAA-395(sup T) = DSMZ 14708(sup T).

Pikuta, Elena↗
NASA NTRS2003

Desulfonatronum Thiodismutans sp. nov., a Novel Alkaliphilic, Sulfate-reducing Bacterium Capable of Lithoautotrophic Growth

A novel alkaliphilic, sulfate-reducing bacterium, strain MLF1(sup T), was isolated from sediments of soda Mono Lake, California. Gram-negative vibrio-shaped cells were observed, which were 0.6-0.7 x 1.2-2.7 microns in size, motile by a single polar flagellum and occurred singly, in pairs or as short spirilla. Growth was observed at 15-48 C (optimum, 37 C), > 1-7 % NaCI, w/v (optimum, 3%) and pH 8.0-10.0 (optimum, 9.5). The novel isolate is strictly alkaliphilic, requires a high concentration of carbonate in the growth medium and is obligately anaerobic and catalase-negative. As electron donors, strain MLF1(sup T) uses hydrogen, formate and ethanol. Sulfate, sulfite and thiosulfate (but not sulfur or nitrate) can be used as electron acceptors. The novel isolate is a lithoheterotroph and a facultative lithoautotroph that is able to grow on hydrogen without an organic source of carbon. Strain MLF1(sup T) is resistant to kanamycin and gentamicin, but sensitive to chloramphenicol and tetracycline. The DNA G+C content is 63.0 mol% (HPLC). DNA-DNA hybridization with the most closely related species, Desulfonatronum lacustre Z-7951(sup T), exhibited 51 % homology. Also, the genome size (1.6 x 10(exp 9) Da) and T(sub m) value of the genomic DNA (71 +/- 2 C) for strain MLF1(sup T) were significantly different from the genome size (2.1 x 10(exp 9) Da) and T(sub m) value (63 +/- 2 C) for Desulfonatronum lacustre Z-7951(sup T). On the basis of physiological and molecular properties, the isolate was considered to be a novel species of the genus Desulfonatronum, for which the name Desulfonatronum thiodismutans sp. nov. is proposed (the type strain is MLF1(sup T) = ATCC BAA-395(sup T) = DSM 14708(sup T)).

Pikuta, Elena V.↗
NASA NTRS2002

Tindallia Californiensis sp. nov.: A New Halo-Alkaliphilic Primary Anaerobe, Isolated from Meromictic soda Mono Lake in California and the Correction of Diagnosis for Genus Tindallia

A novel extremely halo-alkaliphilic, bacterium strain APO (sup T) was isolated from sediments of the athalassic, meromictic, soda Mono Lake in California. Gram positive, spore-forming, slightly curved rods with sizes 0.6-0.7x 2.5-4.0 micrometers which occur singly, in pairs or short curved chains. Cells, are motile by singular subcentral flagellum. Strain APO (sup T) is mesophilic: growth was observed over the temperature range of +10 C to +48 C (optimum +37 C), NaCl concentration range 1-20 %, wt/vol (optimum 3-5%, wt/vol) and pH range 8.0-11.0 (optimum pH 9.5). The novel isolate is strictly halo-alkaliphilic, requires sodium chloride in medium, obligately anaerobic and catalase-negative. Strain APO (sup T) is organo-heterotroph with fermentative type of metabolism, and uses as substrates: peptone, badotryptone, casamino acids, yeast extract, L-serine, L-lysine, L-histidine, L-arginine, and pyruvate. The main end products of growth on peptone medium were: lactate, acetate, propionate, and ethanol. Strain APO (sup T) is resistant to kanamycin, but sensitive to chloramphenicol, tetracycline, and gentamycin. The sum of G+C in DNA is 44.4 mol% (by HPLC method). On the bait of physiological and molecular properties, the isolate was considered as novel species of genus Tindallia; and the name Tindallia californiensis sp. nov., is proposed for new isolate (type strain APO (sup T) - ATCC BAA_393(sup T) = DSMZ 14871 (sup T)).

Pikuta, Elena↗
NASA NTRS2003

Tindallia californiensis sp. nov., a new anaerobic, haloalkaliphilic, spore-forming acetogen isolated from Mono Lake in California

A novel extremely haloalkaliphilic, strictly anaerobic, acetogenic bacterium strain APO was isolated from sediments of the athalassic, meromictic, alkaline Mono Lake in California. The Gram-positive, spore-forming, slightly curved rods with sizes 0.55- 0.7x1.7-3.0 microns were motile by a single laterally attached flagellum. Strain APO was mesophilic (range 10-48 C, optimum of 37 C); halophilic (NaCl range 1-20% (w/v) with optimum of 3-5% (w/v), and alkaliphilic (pH range 8.0-10.5, optimum 9.5). The novel isolate required sodium ions in the medium. Strain APO was an organotroph with a fermentative type of metabolism and used the substrates peptone, bacto-tryptone, casamino acid, yeast extract, L-serine, L-lysine, L-histidine, L-arginine, and pyruvate. The new isolate performed the Stickland reaction with the following amino acid pairs: proline + alanine, glycine + alanine, and tryptophan + valine. The main end product of growth was acetate. High activity of CO dehydrogenase and hydrogenase indicated the presence of a homoacetogenic, non-cycling acetyl-coA pathway. Strain APO was resistant to kanamycin but sensitive to chloramphenicol, tetracycline, and gentamycin. The G+C content of the genomic DNA was 44.4 mol% (by HPLC method). The sequence of the 16s rRNA gene of strain APO possessed 98.2% similarity with the sequence from Tindullia magadiensis Z-7934, but the DNA-DNA hybridization value between these organisms was only 55%. On the basis of these physiological and molecular properties, strain APO is proposed to be a novel species of the genus Tindallia with the name Tindallia californiensis sp. nov., (type strain APO = ATCC BAA-393 - DSM 14871).

Pikuta, E. V.↗
NASA NTRS2012

Carbon Consequences of Forest Disturbance and Recovery Across the Conterminous United States

Forests of North America are thought to constitute a significant long term sink for atmospheric carbon. The United States Forest Service Forest Inventory and Analysis (FIA) program has developed a large data base of stock changes derived from consecutive estimates of growing stock volume in the US. These data reveal a large and relatively stable increase in forest carbon stocks over the last two decades or more. The mechanisms underlying this national increase in forest stocks may include recovery of forests from past disturbances, net increases in forest area, and growth enhancement driven by climate or fertilization by CO2 and Nitrogen. Here we estimate the forest recovery component of the observed stock changes using FIA data on the age structure of US forests and carbon stocks as a function of age. The latter are used to parameterize forest disturbance and recovery processes in a carbon cycle model. We then apply resulting disturbance/recovery dynamics to landscapes and regions based on the forest age distributions. The analysis centers on 28 representative climate settings spread about forested regions of the conterminous US. We estimate carbon fluxes for each region and propagate uncertainties in calibration data through to the predicted fluxes. The largest recovery-driven carbon sinks are found in the South central, Pacific Northwest, and Pacific Southwest regions, with spatially averaged net ecosystem productivity (NEP) of about 100 g C / square m / a driven by forest age structure. Carbon sinks from recovery in the Northeast and Northern Lake States remain moderate to large owing to the legacy of historical clearing and relatively low modern disturbance rates from harvest and fire. At the continental scale, we find a conterminous U.S. forest NEP of only 0.16 Pg C/a from age structure in 2005, or only 0.047 Pg C/a of forest stock change after accounting for fire emissions and harvest transfers. Recent estimates of NEP derived from inventory stock change, harvest, and fire data show twice the NEP sink we derive from forest age distributions. We discuss possible reasons for the discrepancies including modeling errors and the possibility of climate and/or fertilization (CO2 or N) growth enhancements.

Williams, Christopher A.↗
NASA NTRS1988

Mychonastes desiccatus Brown sp. nova (Chlorococcales, Chlorophyta)--an intertidal alga forming achlorophyllous desiccation-resistant cysts

An intertidal Chlorella-like alga Mychonastes desiccatus Brown sp. nova, capable of forming achlorophyllous desiccation-resistant cysts, has been grown in unialgal culture. This small alga was first isolated from a dried sample of a well-studied microbial mat. The mat, located at North Pond, Laguna Figueroa, San Quintin, Baja California, Mexico, is a vertically-stratified microbial community which forms laminated sediments. Morphology, pigment composition and G+C content are within the range typical for the genus Chlorella s. 1. Unlike other chlorellae, however, upon desiccation M. desiccatus forms an achlorophyllous, lipid-filled cyst (thick-walled resting stage) in which no plastid is evident. Rewetting leads to chloroplast differentiation, excystment and recovery of the fully green alga. During desiccation, sporopollenin is deposited within a thickening cell wall. Encystment cannot be induced by growth in the dark. The formation of desiccation-induced cysts allows the alga to survive frequent and intermittent periods of dryness. These chlorellae tolerate wide ranges of acidity and temperature; they both grow and form cysts in media in which sodium ions are replaced with potassium. Although the cysts tolerate crystalline salts, the cell grow optimally in concentrations corresponding from three-quarters to full-strength seawater.

NASA Discipline Exobiology↗
DOE OSTI2021

Coarse Woody Debris Decomposition Assessment Tool: Model validation and application

Coarse woody debris (CWD) is a significant component of the forest biomass pool; hence a model is warranted to predict CWD decomposition and its role in forest carbon (C) and nutrient cycling under varying management and climatic conditions. A process-based model, CWDDAT (Coarse Woody Debris Decomposition Assessment Tool) was calibrated and validated using data from the FACE (Free Air Carbon Dioxide Enrichment) Wood Decomposition Experiment utilizing pine ( Pinus taeda ), aspen ( Populous tremuloides ) and birch ( Betula papyrifera ) on nine Experimental Forests (EF) covering a range of climate, hydrology, and soil conditions across the continental USA. The model predictions were evaluated against measured FACE log mass loss over 6 years. Four widely applied metrics of model performance demonstrated that the CWDDAT model can accurately predict CWD decomposition. The R 2 (squared Pearson’s correlation coefficient) between the simulation and measurement was 0.80 for the model calibration and 0.82 for the model validation ( P <0.01). The predicted mean mass loss from all logs was 5.4% lower than the measured mass loss and 1.4% lower than the calculated loss. The model was also used to assess the decomposition of mixed pine-hardwood CWD produced by Hurricane Hugo in 1989 on the Santee Experimental Forest in South Carolina, USA. The simulation reflected rapid CWD decomposition of the forest in this subtropical setting. The predicted dissolved organic carbon (DOC) derived from the CWD decomposition and incorporated into the mineral soil averaged 1.01 g C m -2 y -1 over the 30 years. The main agents for CWD mass loss were fungi (72.0%) and termites (24.5%), the remainder was attributed to a mix of other wood decomposers. These findings demonstrate the applicability of CWDDAT for large-scale assessments of CWD dynamics, and fine-scale considerations regarding the fate of CWD carbon.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Uranus Flagship-class Orbiter and Probe Using Aerocapture

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest National Academies of Sciences Planetary Decadal Survey. Since the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies bordering 13-15 years and require a large amount of propellant (wet mass percentages of around 60-70%) for the orbit insertion maneuver, leaving less mass for the scientific payload and a planetary probe. Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture has been considered for several past missions but it has not been demonstrated. However, recent developments in thermal protection systems (TPS), guidance and control (G&C), and interplanetary navigation capabilities show the potential for using rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. Aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) that can be used for a robust atmospheric entry probe. Additionally, the aerocapture maneuver would reduce the interplanetary transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion. Recent work has shown that a flagship-class mission can be conducted in a shorter time than fully-propulsive missions if using aerocapture. This paper will consider the merits of including aerocapture as the orbit-insertion mechanism for a Uranus mission. Specifically, the implications of aerocapture orbit insertion for in-situ atmospheric probes will be discussed. The Uranus Orbiter and Probe concept mission study [3] is considered as the potential payload. Results from a recent NASA Space Technology Mission Directorate (STMD)-funded activity that is designing an aerocapture mission for a Uranus orbiter will be presented.

Soumyo Dutta↗
NASA NTRS1968

The Use of Large Lithium-Drifted, Germanium Diodes for Gamma-Ray Spectral Measurements at Balloon Altitudes

A series of balloon-borne experiments has been initiated at the Oak Ridge National Laboratory (ORNL) in cooperation with the Space Sciences Laboratory of the NASA G. C. Marshall Space Flight Center to determine the feasibility of using large (greater than 20 cc) lithium-drifted, germanium diodes to investigate the spectrum of atmospheric gamma rays (60 keV < E < 1.5 MeV) at altitudes corresponding to a few grams per cm (sup 2) residual atmosphere. The results of these measurements will also provide a basis for designing an appropriate shield for a multi-diode, highly directional gamma-ray spectrometer for use in astrophysical measurements. Two flights were accomplished during 1967 using the same two diodes and basic instrument package. Both flights were launched at the NCAR Scientific Balloon Flight Base, Palestine, Texas, and attained a float altitude of 117, 000 ft. The measured atmospheric gamma-ray spectrum shows at least one distinct line at 511 keV (annihilation radiation) superimposed on a continuous distribution of gamma rays attributable to both energy-degraded gamma rays and brems-strahlung photons. A second diode, encased in a passive shield of plastic and lead, shows the expected lines resulting from both neutron inelastic scattering and capture in the germanium. Data acquisition was accomplished on an event-by-event basis through the use of 512-channel, on-board ADC and word-generator circuits and a ground-based, on-line telemetry decoder. The decoder makes it possible to store the data in the memory of a modified pulse-height analyzer simultaneously with storage on magnetic tape. This provides a real-time visual observation of the data as it is accumulated and greatly facilitates preflight calibrations.

Chapman, G. T.↗
DOE OSTI2020

Operando Tailoring of Defects and Strains in Corrugated β-Ni(OH) 2 Nanosheets for Stable and High-Rate Energy Storage

Nickel hydroxide represents a technologically important material for energy storage, such as hybrid supercapacitors. It has two different crystallographic polymorphs, α- and β-Ni(OH) 2 , showing advantages in either theoretical capacity or cycling/rate performance, manifesting a trade-off trend that needs to be optimized for practical applications. In this work, the synergistic superiorities in both activity and stability of corrugated β-Ni(OH) 2 nanosheets are demonstrated through an electrochemical abuse approach. With ≈91% capacity retention after 10 000 cycles, the corrugated β-Ni(OH) 2 nanosheets can deliver a gravimetric capacity of 457 C g -1 at a high current density of 30 A g -1 , which is nearly two and four times that of the regular α- and β-Ni(OH) 2 , respectively. Operando spectroscopy and finite element analysis reveal that greatly enhanced chemical activity and structural robustness can be attributed to the in situ tailored lattice defects and the strain-induced highly curved micromorphology. This work demonstrates a multi-scale defect-and-strain co-design strategy, which is helpful for rational design and tuned fabrication of next-generation electrode materials for stable and high-rate energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High‐Rate Polymeric Redox in MXene‐Based Superlattice‐Like Heterostructure for Ammonium Ion Storage

Abstract Achieving both high redox activity and rapid ion transport is a critical and pervasive challenge in electrochemical energy storage applications. This challenge is significantly magnified when using large‐sized charge carriers, such as the sustainable ammonium ion (NH 4 + ). A self‐assembled MXene/n‐type conjugated polyelectrolyte (CPE) superlattice‐like heterostructure that enables redox‐active, fast, and reversible ammonium storage is reported. The superlattice‐like structure persists as the CPE:MXene ratio increases, accompanied by a linear increase in the interlayer spacing of MXene flakes and a greater overlap of CPEs. Concurrently, the redox activity per unit of CPE unexpectedly intensifies, a phenomenon that can be explained by the enhanced de‐solvation of ammonium due to the increased volume of 3 Å‐sized pores, as indicated by molecular dynamic simulations. At the maximum CPE mass loading (MXene:CPE ratio = 2:1), the heterostructure demonstrates the strongest polymeric redox activity with a high ammonium storage capacity of 126.1 C g −1 and a superior rate capability at 10 A g −1 . This work unveils an effective strategy for designing tunable superlattice‐like heterostructures to enhance redox activity and achieve rapid charge transfer for ions beyond lithium.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ligand Protonation Triggers H 2 Release from a Dinickel Dihydride Complex to Give a Doubly “T”-Shaped Dinickel(I) Metallodiradical

The dinickel(II) dihydride complex (1 K ) ofapyrazolate-based compartmental ligand with b-diketiminato (nacnac) chelate arms (L - ), providing two pincer-type {N 3 } binding pockets, has been reported to readily eliminate H 2 and to serve as a masked dinickel(I) species. Discrete dinickel(I) complexes (2 Na , 2 K ) of L - are now synthesized via a direct reduction route. They feature two adjacent T-shaped metalloradicals that are antiferromagnetically coupled, giving an S = 0 ground state. The two singly occupied local d x 2 -y 2 type magnetic orbitals are oriented into the bimetallic cleft, enabling metal–metal cooperative 2 e - substrate reductions as shown by the rapid reaction with H 2 or O 2 . X-ray crystallography reveals distinctly different positions of the K + in 1 K and 2 K , suggesting a stabilizing interaction of K + with the dihydride unit in 1 K . H 2 release from 1 K is triggered by peripheral g-C protonation at the nacnac subunits, which DFT calculations show lowers the barrier for reductive H 2 elimination from the bimetallic cleft.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrazone-Linked Heptazine Polymeric Carbon Nitrides for Synergistic Visible-Light-Driven Catalysis

Heptazine-based conjugated polymeric carbon nitrides (PCNs) are promising metal-free photocatalysts, yet their synthesis is challenging due to the electron-deficiency and insolubility of heptazine units. Indeed, heptazine-containing polymers have only been prepared through nucleophilic substitution with amines by using toxic cyameluric chloride as the starting material. Herein, we report the novel and environmentally friendly method for preparing heptazine-based mesoporous PCNs with hydrazone links formed through a simple Schiff base condensation of melem-NH 2 and aldehydes. Unlike cyameluric chloride, melem-NH 2 is non-toxic, stable, and can be readily obtained from melem and hydrazine in solution. We demonstrate that the hydrazone linkages and the heptazine units synergistically enhance the photocatalytic activity of PCNs in visible-light-driven aerobic oxidation of benzyl alcohol to benzaldehyde. In particular, the polymer constructed from melem-NH2 and p-phthalaldehyde shows 17 times more activity than graphitic carbon nitride (g-C 3 N 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improved Bounds for Burning Fence Graphs

Graph burning studies how fast a contagion, modeled as a set of fires, spreads in a graph. The burning process takes place in synchronous, discrete rounds. In each round, a fire breaks out at a vertex, and the fire spreads to all vertices that are adjacent to a burning vertex. Additionally, the burning number of a graph G is the minimum number of rounds necessary for each vertex of G to burn. We consider the burning number of the \(m \times n\) Cartesian grid graphs, written \(G_{m,n}\) . For \(m = \omega (\sqrt{n})\) , the asymptotic value of the burning number of \(G_{m,n}\) was determined, but only the growth rate of the burning number was investigated in the case \(m = O(\sqrt{n})\) , which we refer to as fence graphs. We provide new explicit bounds on the burning number of fence graphs \(G_{c\sqrt{n},n}\) , where \(c > 0\) .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Aboveground and belowground contributions to ecosystem respiration in a temperate deciduous forest

In this study, we developed a three-way carbon dioxide (CO 2 ) flux-partitioning algorithm that separates net ecosystem exchange (NEE) into aboveground plant respiration (R above ), belowground root and soil respiration (R below ), and gross primary production (GPP). We applied this algorithm to a coupled dataset of continuous chamber-measured soil respiration and eddy covariance (EC)-measured NEE of CO 2 in an oak-hickory (Quercus-Carya) deciduous broadleaf forest from 2006 to 2015. We found that on annual time scale, R below dominated over R above with the former accounting for 66.9–86.4% and the latter 13.6–33.1%, of the total ecosystem respiration (R eco ). The ratio of R below to R above varied seasonally, ranging from 1.77 to 7.25 in growing season, and 1.02 to 4.57 in non-growing season. The temperature sensitivity (E 0 ) of R below was significantly higher than that of R above , and E 0 of R eco responded differently to air and soil temperature. Over the whole study period, annual mean R above , R below , and GPP were 243, 806, and 1170 g C m –2 , respectively, with annual R eco accounting for 89.6% of GPP, of which 68.8% was lost as R below and 20.8% lost as R above , and leaving only 10% of the carbon fixation in ecosystems. Furthermore, these estimates, however, did not consider potential light inhibition of leaf respiration. If we accept the presence of light inhibition, then the daytime three-way partitioning method would underestimate annual R above by 20.4% whereas the nighttime method would overestimate R above by 23.9% and GPP by 4.7%, compared with estimates accounting for light inhibition in leaves.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

(CrMnCoNiTi) 3 O 4 high-entropy spinel oxide as a high-performance electrode for supercapacitors

In this study, spinel-structured (CrMnCoNiTi)₃O₄ high-entropy oxides (HEOs) have been successfully synthesized using the solution combustion method, and their performance as supercapacitor electrode materials was investigated. These HEOs exhibit excellent performance, stemming from the unique high-entropy effect and lattice distortion. This structure effectively buffers volumetric strain during cycling, conferring the material with extremely high structural stability and specific capacity. The material demonstrates a high specific capacity of 491.5 C∙g⁻¹ at a current density of 0.5 A∙g⁻¹. Furthermore, it shows extraordinary cycling stability: after 10,000 charge/discharge cycles at 5 A∙g⁻¹, the capacity retention rate is 99%, and the Coulombic efficiency consistently remains close to 100%. Ex-situ structural characterizations further reveal that this excellent cycling durability originates from a cooperative multination valence reconstruction mechanism within an entropy-stabilized spinel framework. Additionally, a symmetric supercapacitor assembled using this material and 1 M KOH electrolyte successfully extended the working voltage to 1.2 V. This research highlights the great potential of high-entropy oxides in synergizing high energy density and ultra-long cycling life, laying a solid foundation for the development of next-generation high-performance supercapacitor electrode materials.

High entropy oxides↗