SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Most supernovae are profoundly radioactive and the Gamma Ray Observatory is an ideal instrument for detecting their unique gamma ray line and X-ray signatures. How the observation of these hard photons can be used to do supernova science will be addressed, with particular emphasis being placed on Type Ia explosions and nearby events.
The United States spends approximately four million dollars each year searching for near-Earth objects (NEOs). The objective is to detect those that may collide with Earth. The majority of this funding supports the operation of several observatories that scan the sky searching for NEOs. This, however, is insufficient in detecting the majority of NEOs that may present a tangible threat to humanity. A significantly smaller amount of funding supports ways to protect the Earth from such a potential collision or "mitigation." In 2005, a Congressional mandate called for NASA to detect 90 percent of NEOs with diameters of 140 meters of greater by 2020. Defending Planet Earth: Near-Earth Object Surveys and Hazard Mitigation Strategies identifies the need for detection of objects as small as 30 to 50 meters as these can be highly destructive. The book explores four main types of mitigation including civil defense, "slow push" or "pull" methods, kinetic impactors and nuclear explosions. It also asserts that responding effectively to hazards posed by NEOs requires national and international cooperation. Defending Planet Earth: Near-Earth Object Surveys and Hazard Mitigation Strategies is a useful guide for scientists, astronomers, policy makers and engineers.
The solar-wind Ba release experiment with the Active Magnetospheric Particle Tracer Explorers is discussed. The explosion of the two Ba-containing canisters produced a rapidly expanding cloud of neutral Ba, which was rapidly ionized by the UV radiation from the sun. A static electric field of about 1-2 mV/m was detected inside the diamagnetic cavity created by the ion cloud. This field is in the same direction as the solar-wind electric field, suggesting that this field may be able to penetrate into the cloud. Electrostatic emissions were observed inside the diamagnetic cavity at the Ba ion plasma frequency.
During the Space Shuttle Program, one of the most hazardous operation that occurred was the loading of liquid hydrogen (LH2) during fueling operations of the spacecraft. Due to hydrogen's low explosive limit, any amount leaked could lead to catastrophic event. Hydrogen's chemical properties make it ideal as a rocket fuel; however, the fuel is deemed unsafe for most commercial use because of the inability to easily detect the gas leaking. The increased use of hydrogen over traditional fossil fuels would reduce greenhouse gases and America's dependency on foreign oil. Therefore a technology that would improve safety at NASA and in the commercial sector while creating a new economic sector would have a huge impact to NASA's mission. The Chemochromic Detector for sensing hydrogen gas leakage is a color-changing detector that is useful in any application where it is important to know not only the presence but also the location of the hydrogen gas leak. This technology utilizes a chemochromicpigment and polymer matrix that can be molded or spun into rigid or pliable shapes useable in variable temperature environments including atmospheres of inert gas, hydrogen gas, or mixtures of gases. A change in color of the detector material indicates where gaseous hydrogen leaks are occurring. The irreversible sensor has a dramatic color change from beige to dark grey and remains dark grey after exposure. A reversible pigment changes from white to blue in the presence of hydrogen and reverts back to white in the presence of oxygen. Both versions of the sensor's pigments were comprised of a mixture of a metal oxide substrate and a hydro-chromic compound (i.e., the compound that changed color in the presence of hydrogen) and immediately notified the operator of the presence of low levels of hydrogen. The detector can be used in a variety of formats including paint, tape, caulking, injection molded parts, textiles and fabrics, composites, and films. This technology brings numerous benefits over the traditional hydrogen sensors: The technology has excellent temperature stability (4K to 373 K), it can be used in cryogenic fluid applications, it is easy to apply and remove; it requires no power to operate; it has a quick response time; the leak points can be detected visually or electronically; it is nonhazardous, thus environmentally friendly; it can be reversible or irreversible; it does not require on-site monitoring; has a long shelf life; the detector is very durable; and the technology is inexpensive to manufacture.
We report a detailed analysis of a flare/failed eruption in Active Region 12018 on April 3, 2014, using observations from SDO/AIA, IRIS, STEREO and Hinode/SOT. Initially, we observed multiple jets originating from the cusp of a large coronal bright point (null-point topology) 1-2 hours prior to the slow rise of a filament. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. Multiple blobs were observed, most likely formed in a breakout current sheet near the cusp during the filament slow rise. During the explosive flare reconnection phase, plasmoids also appeared and moved bidirectionally (speed=100-285 km/s, periodicity~70 s) in the flare current sheet below the erupting filament. The tiny jet-like features in the fan loops were detected during the filament slow-rise/pre-flare phase associated with slow interchange/breakout reconnection at 3D null followed by multiple plasmoids moving along the fan-loops/separatrix. We will discuss why our interpretation is more robust than the nanoflare heating/flows suggested by Antolin et al. (2021).
Aluminum has been identified as a compound within regolith and is likely to become a core component of our infrastructure on the lunar surface as in-situ resource utilization (ISRU) capabilities are advanced Large-scale components, outfitting, and repairs of aluminum materials can be fabricated with robotic wire arc additive manufacturing (WAAM) in order to inhabit the moon’s surface long term WAAM is a high value process for lunar advanced manufacturing as it does not require special containment to reduce explosion hazards such as powder-based additive processes and feedstock The welding process of cold metal transfer (CMT) is a relatively new variation of gas metal arc welding (GMAW, also known as MIG) that relies on the detection of a short circuit in the welding process to control the deposition droplet action, resulting in lower heat input and splatter compared to conventional MIG welding The past year was spent developing the CMT-WAAM process for aluminum materials, tested specialty feedstock, tested within the high vacuum environment, and advanced the MSFC capability to perform complex toolpathing from solid models Upcoming and future work includes large depositions working towards material certification for multiple feedstocks, in-situ monitoring, work to use recycled materials for the AM feedstock, and the design and fabrication of a parabolic flight experiment payload.
We have obtained high resolution echelle spectroscopy of the recurrent nova T CrB (T Coronae Borealis). We find that the surface lithium abundance in T CrB is significantly enhanced compared to field M giants, where it is not detectable. We offer possible explanations for this in terms of either a delay in the onset of convection in the giant star, enhanced coronal activity due to star-spots or the enhancement of Li resulting from the nova explosion(s).
Since the complexity of software systems continues to grow, most engineers face two serious problems: the state space explosion problem and the problem of how to debug systems. In this paper, we propose a game-theoretic approach to full branching time model checking on three-valued semantics. The three-valued models and logics provide successful abstraction that overcomes the state space explosion problem. The game style model checking that generates counter-examples can guide refinement or identify validated formulas, which solves the system debugging problem. Furthermore, output of our game style method will give significant information to engineers in detecting where errors have occurred and what the causes of the errors are.
As a result of the Phase I study, we have demonstrated that a mission to a smallbody (asteroid, comet) whose objective is to conduct a seismic experiment to understandthe interior structure, can be accomplished with small (<200 kg) spacecraft launched on asmall launch vehicle (Athena IIc).We modeled the seismic response of a small body and calculated that the energynecessary to propagate through the body and be detected by a seismometer. Thesecalculations provide guidance as to the type of energy source that is required. A simpleenergy source similar to a NASA standard initiator (NSI) can be used, although a singleNSI is insufficient. An NSI is an explosive pyrotechnic that is used to sever connectionson spacecraft. Use of such an energy source has illustrated two additional areas of study -anchoring of the source and sensor to the surface and understanding the efficiency ofenergy propagation from the source into the surface.The spacecraft has the ability to carry and deploy a series of source/sensors toconduct the experiment by placing them on the surface. We identified a suite of candidatenear-Earth asteroids as targets and used one 1991VG as the target to calculate the missiontrajectory and ∆V requirements. Spacecraft and launch vehicle performance are launchthat any of the candidates could be reached with appropriate mass and launch margins.Sources and sensors are deployed from arm attached to the spacecraft. Thespacecraft maneuvers next to the target body and presses the sensor against the surfaceand releases it. After emplacing all of the surface packages, the sensors are monitored fora period of time to measure the seismic noise. Finally, the active seismic experiment isconducted.The work conducted during Phase I demonstrates that a small mission can be designed to conduct an active seismic experiment on a small near-Earth body. Whileother targets may require more performance, the basic architecture is viable for anytarget.We have identified a number of specific technical areas that require more detailed study. Those areas are largely focused on the detailed analysis and design of the source mechanism and anchoring it to the surface. Such topics will be part of a Phase IIproposal.
Similar to the planets and moons in our solar system, terrestrial exoplanets may be shaped by volcanism and tectonics. The magnitudes and rates of geological activity on terrestrial exoplanets will be intimately linked to their sizes and internal heating rates, and can either facilitate, or preclude, the existence of habitable environments. In order to place bounds on the potential for such activity, we estimate total internal heating rates for 52 exoplanets, with masses and radii up to ~ 8M(sub E) and 2R(sub E), respectively, assuming that internal heating is drawn from both radiogenic and tidal sources. We then compare these internal heating rates to those of the bodies in our solar system in an attempt to constrain the rates of volcanic activity on extrasolar worlds. We find that all of the exoplanets surveyed are likely to exhibit volcanic activity at their surfaces. We also find that at least 25% of the of the planets in our study may be extrasolar ocean worlds, the majority of which may contain internal oceans beneath layers of surface ice. These planets may be similar in structure to the icy moons of the giant planets and may have persistent cryovolcanic activity at their surfaces. Volcanic activity on exoplanets could be detected by next-generation space telescopes in transit spectra. In the case of planets with densities and/or effective temperatures that are consistent with H2O-rich compositions, spectral identification of excess water vapor and other molecules that are explosively vented into space during cryovolcanic eruptions could serve as a way to infer the presence of subsurface oceans, and therefore indirectly assess their habitability. Considering the implications for habitability, our results suggest that characterizing Earth-like exoplanets in terms of the potential for geological activity at their surfaces should be a priority in the coming years.
We report the Fermi Large Area Telescope discovery of gamma-ray pulsations from the 22.7 ms pulsar A in the double pulsar system J0737−3039A/B. This is the first mildly recycled millisecond pulsar (MSP) detected in the GeV domain. The 2.7 s companion object PSR J0737−3039B is not detected in gamma rays. PSR J0737−3039A is a faint gamma-ray emitter, so that its spectral properties are only weakly constrained; however, its measured efficiency is typical of other MSPs. The two peaks of the gamma-ray light curve are separated by roughly half a rotation and are well offset from the radio and X-ray emission, suggesting that the GeV radiation originates in a distinct part of the magnetosphere from the other types of emission. From the modeling of the radio and the gamma-ray emission profiles and the analysis of radio polarization data, we constrain the magnetic inclination alpha and the viewing angle zeta to be close to 90 deg., which is consistent with independent studies of the radio emission from PSR J0737−3039A. A small misalignment angle between the pulsar's spin axis and the system's orbital axis is therefore favored, supporting the hypothesis that pulsar B was formed in a nearly symmetric supernova explosion as has been discussed in the literature already.
We explore high-redshift gamma-ray bursts (GRBs) as promising tools to probe pre-galactic metal enrichment. We utilize the bright afterglow of a Population III (Pop III) GRB exploding in a primordial dwarf galaxy as a luminous background source, and calculate the strength of metal absorption lines that are imprinted by the first heavy elements in the intergalactic medium (IGM). To derive the GRB absorption line diagnostics, we use an existing highly resolved simulation of the formation of a first galaxy which is characterized by the onset of atomic hydrogen cooling in a halo with virial temperature approximately greater than10(exp 4) K.We explore the unusual circumburst environment inside the systems that hosted Pop III stars, modeling the density evolution with the self-similar solution for a champagne flow. For minihalos close to the cooling threshold, the circumburst density is roughly proportional to (1 + z) with values of about a few cm(exp −3). In more massive halos, corresponding to the first galaxies, the density may be larger, n approximately greater than100 cm(exp −3). The resulting afterglow fluxes are weakly dependent on redshift at a fixed observed time, and may be detectable with the James Webb Space Telescope and Very Large Array in the near-IR and radio wavebands, respectively, out to redshift z approximately greater than 20. We predict that the maximum of the afterglow emission shifts from near-IR to millimeter bands with peak fluxes from mJy to Jy at different observed times. The metal absorption line signature is expected to be detectable in the near future. GRBs are ideal tools for probing the metal enrichment in the early IGM, due to their high luminosities and featureless power-law spectra. The metals in the first galaxies produced by the first supernova (SN) explosions are likely to reside in low-ionization stages (C II, O I, Si II and Fe II). We show that, if the afterglow can be observed sufficiently early, analysis of the metal lines may distinguish whether the first heavy elements were produced in a pair-instability supernova or a core-collapse (Type II) SN, thus constraining the initial mass function of the first stars.
Like the planets and moons in our solar system, the surfaces of terrestrial exoplanets may be shaped by volcanic activity. The magnitudes and rates of volcanic activity on terrestrial exoplanets will be intimately linked to their sizes and internal heating rates and can either facilitate or preclude the existence of habitable environments. In order to place bounds on the potential for such activity, we estimate total internal heating rates for 53 exoplanets with masses and radii up to∼8M⊕and 2R⊕, respectively, assuming that internal heating is drawn from both radiogenic and tidal sources. We then compare these internal heating rates to those of the planets and moons in our solar system in an attempt to constrain the expected rates of volcanic activity on these extrasolar worlds. We find that all 53 of the exoplanets surveyed are likely to have volcanic activity at their surfaces, and that at least 26% of these planets may be extrasolar ocean worlds. The majority of these ocean worlds may be similar in structure to the icy moons of the giant planets, having internal oceans beneath layers of surface ice. If so, these planets may exhibit cryovolcanism (i.e., icy volcanism)at their surfaces. Recent studies have shown that extrasolar volcanism could be detected by high-resolution spectrographs on existing ground-based telescopes. In the case of planets with densities and/or effective temperatures that are consistent with H2O-rich compositions, spectral identification of excess water vapor and other molecules that are explosively vented into space during cryovolcanic eruptions could serve as a way to infer the presence of subsurface oceans, and therefore indirectly assess their habitability. Considering the implications for habitability, our results suggest that continued characterization of terrestrial exoplanets in terms of their potential for volcanic activity should be a priority in the coming years.
Our hypothesis is that metabolic gases play a role in the initial explosive growth phase of bubble formation during hypobaric exposures. Models that account for optimal internal tensions of dissolved gases to predict the probability of occurrence of venous gas emboli were statistically fitted to 426 hypobaric exposures from National Aeronautics and Space Administration tests. The presence of venous gas emboli in the pulmonary artery was detected with an ultrasound Doppler detector. The model fit and parameter estimation were done by using the statistical method of maximum likelihood. The analysis results were as follows. 1) For the model without an input of noninert dissolved gas tissue tension, the log likelihood (in absolute value) was 255.01. 2) When an additional parameter was added to the model to account for the dissolved noninert gas tissue tension, the log likelihood was 251.70. The significance of the additional parameter was established based on the likelihood ratio test (P < 0.012). 3) The parameter estimate for the dissolved noninert gas tissue tension participating in bubble formation was 19. 1 kPa (143 mmHg). 4) The additional gas tissue tension, supposedly due to noninert gases, did not show an exponential decay as a function of time during denitrogenation, but it remained constant. 5) The positive sign for this parameter term in the model is characteristic of an outward radial pressure of gases in the bubble. This analysis suggests that dissolved gases other than N2 in tissues may facilitate the initial explosive bubble-growth phase.
We report results from a comprehensive follow-up observing campaign of the afterglow of GRB 030226 including VLT spectroscopy, VLT polarimetry, and Chandra X-ray observations. In addition, we present BOOTES-1 wide-field observations at the time of the occurrence of the burst. First observations at ESO started 0.2 days after the event when the gamma ray burst (GRB) afterglow was at a magnitude of R approximately 19 and continued until the afterglow had faded below the detection threshold (R greater than 26). No underlying host galaxy was found. The optical light curve shows a break around 0.8 days after the burst, which is achromatic within the observational errors, supporting the view that it was due to a jetted explosion. Close to the break time the degree of linear polarization of the afterglow light was less than 1.1%, which favors a uniform-jet model rather than a structured one. VLT spectra show two absorption line systems at redshifts z = 1.962 plus or minus 0.001 and 1.986 plus or minus 0.001, placing the lower limit for the redshift of the GRB close to 2. We emphasize that the kinematics and the composition of the absorbing clouds responsible for these line systems are very similar to those observed in the afterglow of GRB 021004. This corroborates the picture in which at least some GRBs are physically related to the explosion of a Wolf-Rayet star.
Gamma-Ray Bursts (GRBs) are the most luminous explosions in space and trace the cosmic star formation history back to the first generations of stars. Their bright afterglows allow us to trace the abundances of heavy elements to large distances, thereby measuring cosmic chemical evolution. To date GRBs have been detected up to distances of z=8.23 and possibly even beyond z~9. This makes GRBs a unique and powerful tool to probe the high-z Universe up to the re-ionization era. We discuss the current status of the field, place it in context with other probes, and also discuss new mission concepts that have been planned to utilize GRBs as probes.
The Roadmap for the Structure and Evolution of the Universe (SEU) theme embraces three fundamental, scientific quests: (1) To explain structure in the Universe and forecast our cosmic destiny. (2) To explore the cycles of matter and energy in the evolving Universe. (3) To examine the ultimate limits of gravity and energy in the Universe. These quests are developed into six, focused research campaigns addressing the objectives of one or more quests: Identify dark matter and learn how it shapes galaxies and systems of galaxies; Find out where and when the chemical elements were made; Understand the cycles in which matter, energy, and magnetic field are exchanged between stars and the gas between stars; Discover how gas flows in disks and how cosmic jets are formed; Identify the sources of gamma-ray bursts and high-energy cosmic rays; and Measure how strong gravity operates near black holes and how it affects the early Universe. These campaigns lead to a portfolio of future major missions of strong scientific and popular appeal, strongly endorsed by the scientific community and which has undergone significant initial study. Some of these missions are in a state of readiness that makes ideal candidates for the present Office of Space Science Strategic Plan; others may well feature in the next Strategic Plan. Each provides a golden scientific opportunity to advance our understanding of the Universe. Our highest priority science objectives are addressed by five Observatory Class Missions, unranked by science, but in approximate order of readiness: A high-energy gamma-ray facility that will observe relativistic jets and study the sources of cosmic gamma ray bursts; An ultra-sensitive X-ray telescope, optimized for spectroscopy, to examine the hot gas linked with clusters of galaxies, the disks around black holes, and supernova explosions; A large, radio telescope in deep space to map central regions of distant quasars and perform astrometric investigations; An orbiting gravitational coalescing, massive black holes and test how gravity waves distort spacetime; A pair of Earth-orbiting, optical telescopes that will detect flashes of light produced when ultra high-energy cosmic rays impact the upper atmosphere so as to determine their arrival directions and energies. A new program for supporting pertinent international collaboration is strongly endorsed and maintaining a strong Explorer program is important. The flexibility to exploit exceptional opportunities, such as attaching payloads to space station, should also be acquired. A strong technology development program must be initiated now to enable this mission set.
The purpose of this paper is to provide an overview of the current trends and practices in small-satellite software verification and validation. This document is not intended to promote a specific software assurance method. Rather, it seeks to present an unbiased survey of software assurance methods used to verify and validate small satellite software and to make mention of the benefits and value of each approach. These methods include simulation and testing, verification and validation with model-based design, formal methods, and fault-tolerant software design with run-time monitoring. Although the literature reveals that simulation and testing has by far the longest legacy, model-based design methods are proving to be useful for software verification and validation. Some work in formal methods, though not widely used for any satellites, may offer new ways to improve small satellite software verification and validation. These methods need to be further advanced to deal with the state explosion problem and to make them more usable by small-satellite software engineers to be regularly applied to software verification. Last, it is explained how run-time monitoring, combined with fault-tolerant software design methods, provides an important means to detect and correct software errors that escape the verification process or those errors that are produced after launch through the effects of ionizing radiation.