Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Euler flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A comparison of Euler and Navier-Stokes solutions for supersonic flow over a conical delta wing

The flow around a thin elliptic cone at Mach number 2 and angle of attack 10 deg is simulated numerically, comparing the results obtained using a fine grid and the Navier-Stokes (NS) equations with those obtained using both coarse and fine grids and the Euler (E) equations. On the coarse grid, the E results are found to reproduce roughly the NS predictions of leading-edge separation and primary and secondary vortices on the leeward surface, but the E solution on the fine NS grid (showing no separation and a crossflow-shock-induced vorticity) reveals this agreement to be spurious. The fine-grid E prediction is shown to be a valid solution of the E equations, indicating their unsuitability as approximators of viscous flow. The imposition of a Kutta condition on the E computation is found to be ineffective in correcting this discrepancy.

Newsome, R. W.↗
NASA NTRS1975

Time-dependent hydrodynamic phenomena in the envelopes of the Be stars

Temporal and angular variations in the motion and distribution of circumstellar material about Be stars are studied by means of a simple hydrodynamical approach. The flow variables are each written as the sum of a known, steady-state axisymmetric term and a smaller component which contains both temporal and angular dependence. Substitution of these dichotomous expressions for the flow variables into Euler's equation and the continuity equation leads to a set of linearized equations for the terms which depend on time and angle. Solutions can be found to a somewhat approximated version of the linearized equations, and these solutions explain the qualitative features of the observed short-time variations.

Morgan, T. H.↗
NASA NTRS1986

Upwind relaxation algorithms for Euler/Navier-Stokes equations

A description of and results from a solution algorithm for the compressible Navier-Stokes equations are presented. The main features of the algorithm are second or third order accurate upwind discretization of the convection and pressure derivatives and a relaxation scheme for the unfactored implicit backward Euler time method, implemented in a finite-volume formulation. Upwind methods were successfully used to obtain solutions to the Euler equations for flows with strong shock waves. The particular upwind method being used is based on the flux vector splitting technique developed by Van Leer and both second and third order accurate discretizations were developed. Currently, the most widely used implicit solution technique for the Navier-Stokes equations use approximate factorization (AF) methods to treat multidimensional problems. The time integration scheme being used in the present algorithm corresponds to a line Gauss-Seidel relaxation method. This method produces good convergence rates for steady-state flows, and most of the algorithm was vectorized on the NASA Langley VPS 32 computer. The Navier-Stokes algorithm was tested for several two-dimensional flow problems. Solutions for the problems gave excellent results. The presented effort is directed toward the extension of the scheme to the full three-dimensional Navier-Stokes equations.

Thomas, J. L.↗
NASA NTRS1989

A computational challenge - Euler solution for ellipses

The Euler equations for flow past an ellipse are solved numerically. A computationally complex problem involving inviscid flow past an elliptical two-dimensional surface at subcritical Mach number and angle of attack is introduced. A lifting solution for any combination of grid and/or angle of attack which is nonsymmetric is obtained.

Pulliam, Thomas H.↗
NASA NTRS1990

Viscous shock profiles and primitive formulations

Weak solutions of hyperbolic systems in primitive (non-conservation) form for which a consistent conservation form exists are considered. It is shown that primitive formulations, shock relations are not uniquely defined by the states to either side of the shock but also depend on the viscous path connecting the two. Scheme-dependent high order correction terms are derived that enforce consistent viscous shock profiles. The resulting primitive algorithm is conservative to the order of approximation. One dimensional Euler calculations of flows containing strong shocks clearly show that conservation errors in primitive flow calculations are of comparable quality.

Karni, S.↗
NASA NTRS1991

Calculation Of Aeroelastic Transients Using Euler Equations

Method for calculation of transient aeroelastic effects on airplane wings based on Euler equations of flow. Conforming grids facilitate calculations of flows about changing shapes. Capability to compute aeroelastic effects reduces cost of developing aircraft.

Guruswamy, Guru P.↗
NASA NTRS1990

Performance of a parallel code for the Euler equations on hypercube computers

The performance of hypercubes were evaluated on a computational fluid dynamics problem and the parallel environment issues were considered that must be addressed, such as algorithm changes, implementation choices, programming effort, and programming environment. The evaluation focuses on a widely used fluid dynamics code, FLO52, which solves the two dimensional steady Euler equations describing flow around the airfoil. The code development experience is described, including interacting with the operating system, utilizing the message-passing communication system, and code modifications necessary to increase parallel efficiency. Results from two hypercube parallel computers (a 16-node iPSC/2, and a 512-node NCUBE/ten) are discussed and compared. In addition, a mathematical model of the execution time was developed as a function of several machine and algorithm parameters. This model accurately predicts the actual run times obtained and is used to explore the performance of the code in interesting but yet physically realizable regions of the parameter space. Based on this model, predictions about future hypercubes are made.

Barszcz, Eric↗
NASA NTRS1991

Euler/experiment correlations of sonic boom pressure signatures

The ability of inviscid computational fluid dynamics (CFD) codes to compute sonic boom pressure signatures is examined using three different codes that solve the Euler equations of fluid flow on structured hexahedral and unstructured tetrahedral grids. The results of these Euler codes were evaluated by comparing the computed pressure signatures with near-field experimental data. The computational pressure signatures were determined at distances of one body length or less below the configuration in the plane of symmetry and extrapolated to experimental distances. The extrapolated CFD pressure signatures gave acceptable correlations with experimental data, provided that fine grids were used near the surface and downstream of the configuration.

Cliff, Susan E.↗
NASA NTRS1992

Some recent applications of Navier-Stokes codes to rotorcraft

Many operational limitations of helicopters and other rotary-wing aircraft are due to nonlinear aerodynamic phenomena incuding unsteady, three-dimensional transonic and separated flow near the surfaces and highly vortical flow in the wakes of rotating blades. Modern computational fluid dynamics (CFD) technology offers new tools to study and simulate these complex flows. However, existing Euler and Navier-Stokes codes have to be modified significantly for rotorcraft applications, and the enormous computational requirements presently limit their use in routine design applications. Nevertheless, the Euler/Navier-Stokes technology is progressing in anticipation of future supercomputers that will enable meaningful calculations to be made for complete rotorcraft configurations.

Mccroskey, W. J.↗
NASA NTRS1995

A comparison of design variables for control theory based airfoil optimization

This paper describes the implementation of optimization techniques based on control theory for airfoil design. In our previous work in the area it was shown that control theory could be employed to devise effective optimization procedures for two-dimensional profiles by using either the potential flow or the Euler equations with either a conformal mapping or a general coordinate system. We have also explored three-dimensional extensions of these formulations recently. The goal of our present work is to demonstrate the versatility of the control theory approach by designing airfoils using both Hicks-Henne functions and B-spline control points as design variables. The research also demonstrates that the parameterization of the design space is an open question in aerodynamic design.

Reuther, James↗
NASA NTRS1996

Research in Parallel Algorithms and Software for Computational Aerosciences

Phase 1 is complete for the development of a computational fluid dynamics CFD) parallel code with automatic grid generation and adaptation for the Euler analysis of flow over complex geometries. SPLITFLOW, an unstructured Cartesian grid code developed at Lockheed Martin Tactical Aircraft Systems, has been modified for a distributed memory/massively parallel computing environment. The parallel code is operational on an SGI network, Cray J90 and C90 vector machines, SGI Power Challenge, and Cray T3D and IBM SP2 massively parallel machines. Parallel Virtual Machine (PVM) is the message passing protocol for portability to various architectures. A domain decomposition technique was developed which enforces dynamic load balancing to improve solution speed and memory requirements. A host/node algorithm distributes the tasks. The solver parallelizes very well, and scales with the number of processors. Partially parallelized and non-parallelized tasks consume most of the wall clock time in a very fine grain environment. Timing comparisons on a Cray C90 demonstrate that Parallel SPLITFLOW runs 2.4 times faster on 8 processors than its non-parallel counterpart autotasked over 8 processors.

Domel, Neal D.↗
NASA NTRS1996

Research in Parallel Algorithms and Software for Computational Aerosciences

Phase I is complete for the development of a Computational Fluid Dynamics parallel code with automatic grid generation and adaptation for the Euler analysis of flow over complex geometries. SPLITFLOW, an unstructured Cartesian grid code developed at Lockheed Martin Tactical Aircraft Systems, has been modified for a distributed memory/massively parallel computing environment. The parallel code is operational on an SGI network, Cray J90 and C90 vector machines, SGI Power Challenge, and Cray T3D and IBM SP2 massively parallel machines. Parallel Virtual Machine (PVM) is the message passing protocol for portability to various architectures. A domain decomposition technique was developed which enforces dynamic load balancing to improve solution speed and memory requirements. A host/node algorithm distributes the tasks. The solver parallelizes very well, and scales with the number of processors. Partially parallelized and non-parallelized tasks consume most of the wall clock time in a very fine grain environment. Timing comparisons on a Cray C90 demonstrate that Parallel SPLITFLOW runs 2.4 times faster on 8 processors than its non-parallel counterpart autotasked over 8 processors.

Domel, Neal D.↗
NASA NTRS2019

Numerical Predictions of Dust-Induced Heat Flux Augmentation in Hypersonic Blunt-Body Flows Using a Discontinuous Galerkin Multiphase Flow Solver

Recent interest in human-scale missions to Mars has motivated the need for high-fidelity simulations of reentry flows. During a dust storm, there can be high levels of suspended dust in the Martian atmosphere, which cannot only enhance erosion of thermal protection systems but also transfer energy and momentum to the shock layer, thereby significantly augmenting the surface heat flux. Second-order finite-volume schemes are typically employed for hypersonic flow simulations, but such schemes suffer from a number of disadvantages. An attractive alternative is discontinuous Galerkin methods, which benefit from arbitrarily high spatial order of accuracy, geometric flexibility, and other properties. To enable accurate computations of high-speed particle-laden flows, an Euler-Lagrange methodology was developed in which the Eulerian field of the carrier gas is calculated using a discontinuous Galerkin scheme while the disperse phase is treated with Lagrangian particle tracking. We discuss challenges associated with coupling these two formulations and how to handle them. Momentum and energy transfer between the carrier gas and the particle phase is considered, and the importance of accounting for interparticle collisions is assessed. In addition, we describe the physical model of the particle phase and examine effects of its uncertainties on the numerical solution. We demonstrate the performance of the Euler-Lagrange method in representative testcases, with focus on the accurate prediction of particle trajectories and heating augmentation. Quantitative comparisons with experiments are provided.

Ching, Eric J.↗
NASA NTRS1988

Computation of steady and unsteady vortex-dominated flows with shock waves

The unsteady Euler equations have been derived in the conservation form for the flow relative motion with respect to a rotating frame of reference. The resulting equations are solved by using a central-difference finite-volume scheme with four-state Runge-Kutta time stepping. For steady flow applications local time stepping is used, and for unsteady applications the minimum global time stepping is used. A three-dimensional fully vectorized computer program has been developed and applied to steady and unsteady maneuvering delta wings. The capability of the three-dimensional program has been demonstrated for a rigid sharp-edged delta wing undergoing uniform rolling in a conical flow and rolling oscillations in a locally conical flow.

Kandil, Osama A.↗
NASA NTRS2001

The Development of a Factorizable Multigrid Algorithm for Subsonic and Transonic Flow

The factorizable discretization of Sidilkover for the compressible Euler equations previously demonstrated for channel flows has been extended to external flows.The dissipation of the original scheme has been modified to maintain stability for moderately stretched grids. The discrete equations are solved by symmetric collective Gauss-Seidel relaxation and FAS multigrid. Unlike the earlier work ordering the grid vertices in the flow direction has been found to be unnecessary. Solutions for essential incompressible flow (Mach 0.01) and supercritical flows have obtained for a Karman-Trefftz airfoil with it conformally mapped grid,as well as a NACA 0012 on an algebraically generated grid. The current work demonstrates nearly 0(n) convergence for subsonic and slightly transonic flows.

Roberts, Thomas W.↗
NASA NTRS1976

Transonic flow calculations

The development of relaxation methods to calculate transonic flows is discussed. Rather accurate predictions can be made for a number of flows of interest using the transonic potential flow equation, which may be derived from the Euler equations for inviscid compressible flow by introducing the assumption that the flow is irrotational. Once the choice of a mathematical model has been settled, the numerical procedure for actually computing a solution contains two main elements: the construction of a discrete approximation which converges to the solution of the continuous problem in the limit as the mesh width is reduced to zero, and the solution of the resulting set of nonlinear difference equations by a convergent iterative scheme. The choice of an appropriate coordinate system and its influence on the accuracy of the discrete approximation is discussed. Several applications of the general method are described.

Jameson, A.↗