Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

Future NASA robotic missions utilizing an entry system into Venus and the outer planets, results in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or AVCOAT. Previously, mission planners had to assume the use of fully dense carbon phenolic heatshields similar to what was flown on Pioneer Venus or Galileo. Carbon phenolic is a robust TPS material, however, its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-term sustainability of CP will continue to pose challenges. NASA has decided to invest in new technology development rather than invest in reviving carbon phenolic. The HEEET project, funded by STMD is maturing a game changing Woven Thermal Protection System technology. HEEET is a capability development project and is not tied to a single mission or destination, therefore, it is challenging to complete ground testing needed to demonstrate a capability that is much broader than any single mission or destination would require. This presentation will status HEEET progress. Near term infusion target for HEEET is the upcoming New Frontiers (NF-4) class of competitively selected Science Mission Directorate (SMD) missions for which it is incentivized.

thermal protection↗
NASA NTRS2017

Ablation and Heating During Atmospheric Entry and Its Effect on Airburst Risk

Large meteoroids and asteroids entering the atmosphere endure tremendous heating from the shock heated air, and thereby lose a significant fraction of their mass during atmospheric entry a process known as ablation. The predicted evolution of the asteroids mass as it passes through the atmosphere can affect both the predicted energy deposition profile relevant to an airburst event, or the residual mass that strikes the ground in the case of an impact event. This presentation is divided roughly into two parts. In the first part, an overview of traditional models for heat transfer and ablation that are historically used in the meteor physics community is presented, and the validity in the asteroid entry regime discussed. Sensitivity analyses performed using the recently developed Fragment-Cloud Model (FCM) will be presented which show illustrate the range of sizes and entry parameters for which the predicted asteroid threat is most sensitive to the models for ablation and heat transfer. The second part of the presentation shall focus on recent work done under NASAs Asteroid Threat Assessment Project (ATAP) to develop new models for heat transfer and ablation using high-fidelity numerical simulation in concert with state-of-the-art experiments. Coupled computational fluid dynamics (CFD)radiation transport simulations preformed using the state-of-the-art entry modeling tools at NASA show that, for large meteoroids and asteroids, there can significant attenuation of the heat transfer to the surface (95 in some cases) by the products of ablation. In addition to the heat transfer, new models for the material response and ablation of asteroidal material have been developed [cite]. In the current work, we present finding from recent novel experiments performed in the arc jet facility at NASA Ames, which allows us to, in part, simulate the extreme environment experienced by the asteroid during entry. Briefly, the experimental set-up was comprised of a 1.5 conical article of machined H5 chondrite, which was exposed to a high-enthalpy flow resulting in approximately 4 kWcm2 of heating to the surface. A still frame capture from high-speed video taken during this experiment can be seen in Figure 1. In this figure, we can observe some of the major mechanisms for meteoroid ablation, such as melt flow, spallation (mechanical removal of material), and vaporization. Major findings from this, and other experiments will be discussed, as well progress on utilizing the data from the experiments to inform and develop improved models for ablation.

Asteroids↗
NASA NTRS2016

Heatshield for Extreme Entry Environment Technology (HEEET) Development Status

The Heatshield for Extreme Entry Environment Technology (HEEET) Project is a NASA STMD (Space Technology Mission Directorate) and SMD (Science Mission Directorate) co-funded effort. The goal is to develop and mission infuse a new ablative Thermal Protection System that can withstand extreme entry. It is targeted to support NASA's high priority missions, as defined in the latest decadal survey, to destinations such as Venus and Saturn in-situ robotic science missions. Entry into these planetary atmospheres results in extreme heating. The entry peak heat-flux and associated pressure are estimated to be between one and two orders of magnitude higher than those experienced by Mars Science Laboratory or Lunar return missions. In the recent New Frontiers community announcement NASA has indicated that it is considering providing an increase to the PI (Principal Investigator) managed mission cost (PIMMC) for investigations utilizing the Heatshield for Extreme Entry Environment Technology (HEEET) and in addition, NASA is considering limiting the risk assessment to only their accommodation on the spacecraft and the mission environment.

Thermal Protection System↗
NASA NTRS2019

Advances in Entry System Technologies - Continuing the Ames' Innovation Heritage

Advances in Entry Systems Technologies -- Continuing the Ames' Innovation Heritage" will provide an overview of recent accomplishments in the areas of entry systems, TPS materials, arcjet testing, etc.Hypervelocity Entry is a Hard Problem !Use of atmospheric drag is the most efficient way to slow down. Protection fromthe entry heating demands comprehensive understanding of the hypervelocity,reacting flow (aero-thermodynamics), and selection, design, testing and verificationof the integrated entry system, especially thermal protection system.

Venkatapathy, Ethiraj↗
NASA NTRS2019

Heatshield Entry Modeling Using a Design, Analysis, and Optimization Toolbox

The Mars Science Laboratory (MSL) was protected during its Mars atmospheric entry by an instrumented heatshield that used NASA's Phenolic Impregnated Carbon Ablator (PICA). PICA is a lightweight carbon fiber/polymeric resin material that offers excellent performances for protecting probes during planetary entry. The Mars Entry Descent and Landing Instrument (MEDLI) suite on MSL offers unique in-flight validation data for models of atmospheric entry and material response. MEDLI recorded, among others, time-resolved in-depth temperature data of PICA using thermocouple sensors assembled in the MEDLI Integrated Sensor Plugs (MISP). The objective of this work is to showcase the capability of the Design, Analysis, and Optimization of Thermal Protection Materials (DAOTPM) software. DAO-TPM is a Python based framework that works as a link between mission design, aerothermal and radiative environment computation, Thermal Protection Systems (TPS) microstructure analysis, material response and optimization tools. The toolbox has a Graphical User Interface (GUI) that allows the user to build as well as run the various software and utilities used to design, analyze and optimize a heatshield during atmospheric entry.

Meurisse, Jeremie B. E.↗
NASA NTRS2019

The Multi-Mission Earth Entry Vehicle for Sample Return Missions – Past, Present, and Future

The Multi-Mission Earth Entry Vehicle (MMEEV) is an enabling technology developed at NASA’s Langley Research Center (LaRC) over the last two decades for returning samples to Earth across a wide array of space science missions. Currently, the MMEEV is being considered for NASA’s Mars Sample Return (MSR) mission. The original vehicle concept, the Earth Entry Vehicle (EEV), was innovated at LaRC in 1998 as a robust solution to return Mars soil samples to Earth under stringent backward contamination requirements. These backward contamination requirements drove the EEV to have higher reliability than any capsule previously designed for a return-to-Earth sample return mission. The EEV achieved this high reliability by employing a passive (no active systems) vehicle architecture optimized for fault tolerance in a compact, low-mass configuration that is extensible to virtually any sample return mission. The original EEV concept utilized a carbon-carbon primary structure with high-density carbon phenolic thermal protection system. The capsule had a 60-degree sphere-cone forebody and a backshell geometry uniquely tailored to produce aerodynamics that would passively re-orient the vehicle if it entered the atmosphere with an off-nominal attitude. Contrary to every other sample return capsule conceived at the time, the EEV was designed to land without a parachute. The vehicle incorporated an integral energy-absorbing crushable structure that protected the Mars sample for landings on surfaces ranging from soft soil to solid concrete. This paper describes 20 years of technological advancements LaRC has incorporated into the EEV architecture to evolve it from the original, MSR-enabling vehicle, to a true multi-mission capability relevant to any sample return mission. The vehicle’s unique Integrated Composite Stiffener Structure (ICoSS) has been optimized for specific strength - supporting high-G atmospheric entries with steep entry angles that produce precise landing footprints on the ground. The vehicle geometry has been refined through wind tunnel testing and computational fluid dynamics simulations to improve the vehicle’s aerodynamic stability and robustness to off-nominal conditions from hypersonic to subsonic flight. The resulting configuration of the current MMEEV architecture is described, with details provided on its sample carrying capacity and atmospheric entry trajectory capabilities. The upgraded vehicle performance is mapped into current space science objectives, showing how the MMEEV supports future sample return missions and continues to be an enabling technology for NASA’s vision to return samples from Mars.

J M Corliss↗
NASA NTRS2019

Robotic Mars Sample Return and Earth entry vehicle concept development

NASA has studied potential Mars Sample Return over many decades, and the most recent Planetary Science Decadal Survey recommended making significant progress on this topic one of its highest priority goals. Recent inter-agency discussions and scientific support are lending credence to current Mars Sample Return planning activities, which notionally target launch of Sample Retrieval Lander and Earth Return Orbiter flight elements in 2026, and return of Martian samples to Earth in 2031. As part of the Mars Sample Return architecture under consideration, an Earth Entry Vehicle would perform the final phase by protecting the samples through severe entry environments using a 60-deg. sphere-cone flying on a passive/ballistic trajectory. The Earth Entry Vehicle design activities in particular are considering a variety of potential challenges, including: minimizing vehicle mass due to the need to travel to Mars and back to Earth, vehicle robustness to Micrometeroid and Orbital Debris impacts, capability to withstand severe entry environments while minimizing landing ellipse size, and providing impact load attenuation during a high-speed landing to meet Martian sample tube load limits and ensure sample containment in off-nominal scenarios. The present work provides a snapshot of current study work in progress, and highlights paths being taken to address these various design challenges for the conceptual Earth Entry Vehicle.

Corliss, James↗
NASA NTRSDate not supplied

Arc-jet Testing of Continuously Woven Aeroshells–Spiderweave–for Adaptable Deployable Entry Placement Technology

The Adaptable, Deployable Entry Placement Technology (ADEPT) is an entry system that, when deployed, creates a large, umbrella-like drag surface that can be used to decelerate spacecraft during atmospheric entry, resulting in lower entry loads and heating than a rigid aeroshell of equivalent mass. Until needed for entry, the system can remain stowed, enabling missions to overcome launch vehicle fairing diameter constraints. 12-inch diameter umbrella-like articles, similar to a small reentry probe using ADEPT, were tested in the Ames 20-MWAerodynamic Heating Facility. Performance of the test articles built with a novel, continuously woven aeroshell construction (called Spiderweave) is compared against those built with legacy construction styles. In addition, candidate thermal protective layer treatments applied to structurally sensitive regions of the aeroshell are assessed using data from on-board instrumentation as well as facility optical instruments.

ADEPT↗
NASA NTRSDate not supplied

Mars Entry, Descent, and Landing Instrumentation 2 Trajectory, Aerodynamics, and Atmosphere Reconstruction

On February 18th, 2021, the Mars 2020 entry system successfully delivered the Perseverance rover to the surface of Mars at Jezero Crater. The entry capsule carried a set of instrumentation installed on the heat shield and backshell, named the Mars Entry, Descent, and Landing Instrumentation 2. The instruments include pressure transducers, thermocouples, heat flux gauges, and radiometers to measure the aerodynamic and aerothermodynamic performance of the entry vehicle. This paper describes the trajectory and atmosphere reconstruction results based on the pressure sensor measurements. The process uses a Kalman filter approach to estimate the freestream atmospheric properties from the pressure measurements combined with a model of the pressure distribution of the heatshield and other sensor inputs, including an inertial measurement unit and other on-board navigation sensors, and several external atmospheric observations. The results indicate upper altitude density was up to 150% higher than nominal, which is consistent with the observed early entry guidance start time. The density below 40 km was within 12% the pre-flight predictions. The reconstructed axial force coefficient was approximately 2% lower than the pre-flight prediction across the flight range.

Christopher D Karlgaard↗
NASA NTRSDate not supplied

Demonstration of Linear Covariance Analysis Techniques to Evaluate Entry Descent and Landing Guidance Algorithms, Vehicle Configurations, Analysis Techniques, and Trajectory Profiles

Linear covariance analysis techniques have been previously developed to analyze closed-loop entry, descent, and landing (EDL) scenarios and the initial validation efforts are under-way confirming the generated GN&C system performance results. Given both the theoretical foundation and previous conceptual demonstration, this work begins to flex the potential of linear covariance analysis for atmospheric flight and highlight its versatility and reliability by evaluating multiple entry guidance algorithms, vehicle configurations, trajectory profiles, environment conditions, and analysis techniques for a variety of trade studies. To demonstrate the benefit linear covariance analysis can provide in producing rapid yet accurate performance data, two entry profiles are adopted including the NASA Mars Science Laboratory (MSL) and Exploration Flight Test-1 (EFT-1) while utilizing two different guidance algorithms, the Apollo Final Phase (AFP) and the Fully Numeric Predictor-Corrector Entry Guidance (FNPEG) with different navigation sensor suites in a 6 degree-of-freedom (6-DOF) simulation environment. Results are shown using both linear covariance and Monte Carlo analysis techniques to high-light the consistency between the two methodologies and continue the validation maturation of linear covariance analysis for entry, descent, and landing.

EDL↗
NASA NTRSDate not supplied

A TPS Design Analysis of Entry Probe Delivery from Orbit for Ice Giant Missions

Previous investigation of direct delivery of a probe into Neptune’s atmosphere showed said approach to be challenging due to high stagnation pressures and heat loads. Entering at a high entry flight path angle (EFPA) results in stagnation pressure beyond current Heatshield for Extreme Entry Environment Technology (HEEET) qualification, while entering at a lower EFPA results in higher heat loads, leading to required HEEET thicknesses beyond manufacturing capabilities. Aerocapture is an enticing alternative entry scenario because it enables a fast trip and the placement of a payload in orbit around Neptune that can also reach Triton. Here, we investigate entry conditions associated with delivering a probe from orbit to assess feasibility. We consider whether 1) this entry scenario results in reasonable conditions, and 2) HEEET single insulating layer (mid-density carbon phenolic, 3MDCP) can be used to decrease mass, risk, and cost.

H. S. Alpert↗
NASA NTRSDate not supplied

A TPS Design Analysis of Entry Probe Delivery from Orbit for Ice Giant Missions

Previous investigation of direct delivery of a probe into Neptune’s atmosphere showed said approach to be challenging due to high stagnation pressures and heat loads. Entering at a high entry flight path angle (EFPA) results in stagnation pressure beyond current Heatshield for Extreme Entry Environment Technology (HEEET) qualification, while entering at a lower EFPA results in higher heat loads, leading to required HEEET thicknesses beyond manufacturing capabilities. Aerocapture is an enticing alternative entry scenario because it enables a fast trip and the placement of a payload in orbit around Neptune that can also reach Triton. Here, we investigate entry conditions associated with delivering a probe from orbit to assess feasibility. We consider whether 1) this entry scenario results in reasonable conditions, and 2) HEEET single insulating layer (mid-density carbon phenolic, 3MDCP) can be used to decrease mass, risk, and cost.

Hannah S. Alpert↗
NASA NTRSDate not supplied

Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness

The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.

Mars Sample Return↗
NASA NTRSDate not supplied

Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness

The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.

Mars Sample Return↗
NASA NTRSDate not supplied

NASA's Innovative Entry Systems and TPS Technologies Enabling Commercial Space Missions

For over six decades, the NASA Ames Entry Systems and Technology Division has been a cornerstone of U.S. space exploration, delivering critical atmospheric entry solutions since Project Mercury and now increasingly supporting the commercial space sector. The Division provides reliable entry system solutions through a unique blend of expertise, national facilities, and systems integration knowledge, a combination that is difficult to replicate outside a dedicated government entity. Consistently successful, the TS Division remains central to NASA’s exploration objectives and significantly contributes to the transfer of technology to the commercial space sector, supporting more than ten commercial space companies and supplying flight heatshields to three of them in the past five years. Its strengths in Thermal Protection System (TPS) materials, aerothermodynamics, ground test facilities, and Entry, Descent, and Landing (EDL) systems engineering drive rapid development and sustained U.S. competitiveness in space. The Division's expertise in reusable and ablative thermal protection systems, as well as mechanically deployable entry systems primarily developed for NASA missions, now benefits commercial space missions. This presentation will highlight the vision and needs of these commercial space companies, how NASA-invented technologies meet mission requirements, and how these technologies enable and distinguish their efforts.

Ethiraj Venkatapathy↗
NASA NTRS1994

Aerothermodynamic methods for a Mars environmental survey Mars entry

Computational fluid dynamics models for the thermodynamics and transport properties used in an equilibrium version of the Langley aerothermodynamics upwind relaxation algorithm (LAURA) for Mars atmospheric entries are described. In addition, the physical models used in a nonequilibrium version of LAURA for Mars-entry flows are described. Uncertainties exist in defining constants used in the transport properties for the equilibrium model and in many of the physical models for the nonequilibrium version. Solutions from the two codes using the best available constants are examined at the Mars-entry conditions characteristics of the Mars environmental survey mission. While the flowfields are near thermal equilibrium, chemical nonequilibrium effects are present in the entry cases examined. Convective heating at the stagnation point for these flows (assuming fully catalytic wall boundary conditions) is approximately 100 W/cm(exp 2). Radiative heating is negligible.

AEROTHERMODYNAMIC METHODS↗
NASA NTRS2008

Entry, Descent, and Landing Communications for the 2007 Phoenix Mars Lander

This paper addresses NASA's requirement on the 2007 Phoenix Mars Lander to provide spacecraft communications during entry, descent, and landing on Mars to allow the identification of probable root cause should any mission failure occur. The Phoenix mission launched on 4 August 2007 and will land on 25 May 2008 on the northern plains of Mars to conduct a three-month study of the Martian environment. The paper discusses the architectural trades in designing a communications link and surveys the entry, descent, and landing communications approaches taken by previous missions. It then discusses the Phoenix-specific constraints and degrees of freedoms and presents a novel and robust implementation approach to entry, descent, and landing communications. The overall methodology and conclusions described herein can serve as a pathfinder for the entry, descent, and landing communications architecture and implementation of future Mars landed missions.

communications↗
NASA NTRS2012

Entry, Descent, and Landing Communications for the 2011 Mars Science Laboratory

The Mars Science Laboratory (MSL), established as the most advanced rover to land on the surface of Mars to date, launched on November 26th, 2011 and arrived to the Martian Gale Crater during the night of August 5th, 2012 (PDT). MSL will investigate whether the landing region was ever suitable to support carbon-based life, and examine rocks, soil, and the atmosphere with a sophisticated suite of tools. This paper addresses the flight system requirement by which the vehicle transmitted indications of the following events using both X-band tones and UHF telemetry to allow identification of probable root causes should a mission anomaly have occurred: Heat-Rejection System (HRS) venting, completion of the cruise stage separation, turn to entry attitude, atmospheric deceleration, bank angle reversal commanded, parachute deployment, heatshield separation, radar ground acquisition, powered descent initiation, rover separation from the descent stage, and rover release. During Entry, Descent, and Landing (EDL), the flight system transmitted a UHF telemetry stream adequate to determine the state of the spacecraft (including the presence of faults) at 8 kbps initiating from cruise stage separation through at least one minute after positive indication of rover release on the surface of Mars. The flight system also transmitted X-band semaphore tones from Entry to Landing plus one minute although since MSL was occulted, as predicted, by Mars as seen from the Earth, Direct-To-Earth (DTE) communications were interrupted at approximately is approx. 5 min after Entry ( approximately 130 prior to Landing). The primary data return paths were through the Deep Space Network (DSN) for DTE and the existing Mars network of orbiting assets for UHF, which included the Mars Reconnaissance Orbiter (MRO), Mars Odyssey (ODY), and Mars Express (MEX) elements. These orbiters recorded the telemetry data stream and returned it back to Earth via the DSN. The paper also discusses the total power received during EDL and the robustness of the telecom design strategy used to ensure EDL communications coverage.

relay operations↗