SEARCH · Engineering Papers

Results for “Ellipsoids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Influence of nonequilibrium radiation and shape change on aerothermal environment of Jovian entry body

Radiative transfer equations are derived under nonequilibrium conditions which include multilevel energy transitions. The nonequalibrium results, obtained with and without ablation injection in the shock layer, are found to be greatly influenced by the temperature distribution in the shock layer. In the absence of ablative products, the convective and radiative heating to the entry body are reduced significantly under nonequilibrium conditions. The influence of nonequilibrium is found to be greater at higher entry altitudes. With coupled ablation and carbon phenolic injection, 16 chemical species are used in the ablation layer for radiation absorption. Equilibrium and nonequilibrium results are compared under peak heating conditions. A 45 degree sphere cone, a 35 degree hyperboloid, and a 45 degree ellipsoid were used to study probe shape change. Results indicate that the shock layer flow field and heat transfer to the body are influenced significantly by the probe shape change. The effect of shape change on radiative heating of the afterbodies is found to be considerably larger for the sphere cone and ellipsoid than for the hyperboloid.

Tiwari, S. N.↗

NASA NTRS1981

Low thrust chemical orbit to orbit propulsion system propellant management study

Low thrust chemical propulsion systems were sized for transfer of large space systems from LEO to GEO. The influence of propellant combination, tankage and insulation requirements, and propellant management techniques on the LTPS mass and volume were studied. Liquid oxygen combined with hydrogen, methane or kerosene were the propellant combinations. Thrust levels of 445, 2230, and 4450 N were combined with 1, 4 and 8 perigee burn strategies. This matrix of systems was evaluated using multilayer insulation and spray-on-foam insulation systems. Various combinations of toroidal, cylindrical with ellipsoidal domes, and ellipsoidal tank shapes were investigated. Results indicate that low thrust (445 N) and single perigee burn approaches are considerably less efficient than the higher thrust level and multiple burn strategies. A modified propellant settling approach minimized propellant residuals and decreased system complexity, in addition, the toroid/ellipsoidal tank combination was predicted to be shortest.

Dergance, R. H.↗

NASA NTRS1980

Collapse, equilibrium, and fragmentation of rotating, adiabatic clouds

Numerical calculations of the collapse of adiabatic clouds from uniform density and rotation initial conditions show that when restricted to axisymmetry, the clouds form either near-equilibrium spheroids or rings. Rings form in the collapse of low thermal energy clouds and have a ratio of rotational kinetic energy to the absolute value of gravitational potential energy greater than approximately 0.43. When the axisymmetric constraint is removed and an initial m = 2 density variation is introduced, clouds either collapse to form near-equilibrium ellipsoids or else fragment into binary systems through a bar phase. Ellipsoids form in the collapse of high thermal energy clouds and have a rotational kinetic energy/absolute value of gravitational potential energy ratio less than approximately 0.27. The results are consistent with the critical values of the rotational kinetic energy/absolute value of gravitational potential energy ratio for instabilities in Maclaurin spheroids, and suggest that protostellar clouds may undergo a dynamic fragmentation in the nonisothermal collapse regime.

Boss, A. P.↗

NASA NTRS1980

Baffle design for earth radiation rejection in the Cryogenic Limb-Scanning Interferometer/Radiometer

The Cryogenic Limb-Scanning Interferometer/Radiometer (CLIR) is being developed to observe infrared emissions of the earth's upper atmosphere from space. The earth's surface is an extended source of intense background radiation with a small angular separation from the desired scene. The CLIR employs an off-axis Gregorian Telescope whose primary mirror and baffles are cooled by an open-cycle cryogen system. A system of specular annular baffles has been developed to minimize both stray light problems and cryogen consumption by retro-mapping the aperture into itself. Each off-axis ray which enters the aperture and strikes the specular baffle surface is reflected so that it passes out of the aperture and is not absorbed on a cryogenic surface. The specular baffle which lies closest to the aperture is an ellipsoid whose foci trace out the circular aperture on revolution about the axis. Its theoretical 'ray trace' efficiency is 100 percent. A subsequent baffle has an elliptical cross section whose near focus traces out the central hole in the ellipsoidal baffle and whose far focus traces out the aperture. Its theoretical efficiency is about 90 percent. These baffles reduce the earth radiation heat load on the cryogenic cooler by an order of magnitude, changing it from the dominant cause of cryogen consumption to a relatively small effect. An aperture shield is also desirable to reduce cryogen consumption, stray light, and contamination.

Bremer, J. C.↗

NASA NTRS1982

Extended range X-ray telescope: X-ray microscope design

A glancing incidence X-ray microscope using a confocal hyperboloid ellipsoid mirror was designed to couple optically a Wolter 1 telescope to a CCD focal plane detector. Both the RMS spot size and the point spread function calculations were used to evaluate the resolution, defocusing, and vignetting effects of the system for microscope focal lengths of 1, 1.5, and 2 meters and for magnifications varying from 2 to 10x. For the specific application with the S-056 telescope, a 2 meter, 8x microscope with a fabrication ratio of the microscope mirror length to the inner diameter at hyperboloid ellipsoid intersection of 2.5 was designed to be used with a thinned, back illuminated CCD detector array with 320 by 512, 30 micron pixels.

Shealy, D. L.↗

NASA NTRS1981

The influence of the interplanetary magnetic field and thermal pressure on the position and shape of the magnetopause

An ellipsoidal model, in which the size of an ellipsoid of revolution with a constant eccentricity is inversely proportional to the sixth root of the stream pressure of the solar wind, is used to represent the location of the dayside magnetopause and to study the influences of the interplanetary magnetic field and thermal pressure on its location. The effects of the IMF and thermal pressure on the location of the magnetopause are calculated analytically by using the Chapman-Ferraro theory. The changes in magnetopause size, shape and orientation caused by including the thermal pressure are inversely proportional to the square of the sonic Mach number of the solar wind and are sufficient to explain the observed slight departure of the magnetotail from the expected aberration due to the earth's orbital motion. The results suggest that little angular momentum is being carried away from the sun by the solar wind.

Zhuang, H. C.↗

NASA NTRS1982

On the distribution of orbits among long-period comets

The distribution of the axes defining the planes and orientations of the orbits of 542 long-period comets are analyzed. The directions of the perihelia and of the oriented plane normals show significant nonuniformity in their distributions. The preferred direction of perihelia near the apex of solar motion is refined to an (1 sigma) error circle of 20.6 deg, and possible concentrations of the plane normals and the directions of perihelion velocity along roughly orthogonal directions are noted, although the error circles extend to nearly full hemispheres. Planes of preference (and avoidance) are found from the distribution ellipsoids of the three orbital axes, with the perihelion directions lying preferentially along the galactic plane. The distribution ellipsoids of all three sets of orbital axes exhibit anisotropies roughly twice those expected for random distributions.

Bogart, R. S.↗

NASA NTRS1983

Composites with periodic microstructure

For an elastic body containing periodically distributed inhomogeneities, a general procedure is developed for estimating the overall properties of the composite in terms of several infinite series which, for the isotropic matrix (but anisotropic inclusions), depend only on the geometry of the inhomogeneities and hence can be calculated once and for all for each geometry. These infinite series are obtained and tabulated for ellipsoidal inhomogeneities, and the results are used to estimate the overall elastic moduli of composites which contain spherical or ellipsoidal voids or elastic inclusions.

Iwakuma, T.↗

NASA NTRS1984

Analysis of axisymmetric body effects on rotor aerodynamics using modified slender body theory

A modified slender body theory was used in modelling the flowfield around an axisymmetric body at zero angle of attack. The model was defined in an attempt to characterize body-induced effects on helicopter rotor performance and loading using efficient computation methods. The streamfunction for an axial source distribution was applied in the body model, which was then adapted to the helicopter analysis code (CAMRAD). The body-induced velocities were calculated for separate locations on the rotor disk. Three different rotor models in nonuniform inflow with a free wake geometry were considered. Comparison of predictions with data on ellipsoidal and axisymmetric bodies showed good agreement for moderately thick ellipsoidal bodies. Oscillatory blade bending moments were increased by the presence of the body, but overall performance impact was negligible. Computational efficiency was 10-20 percent better than with a potential flow panel code.

Yamauchi, G. K.↗

NASA NTRS1984

The precise computation of geoid undulation differences with comparison to results obtained from the global positioning system

Ellipsoidal height differences have been determined for 13 station pairs in the central Ohio region using measurements made with the Global Positioning System. This information was used to compute geoid undulation differences based on known orthometric heights. These differences were compared to gravimetrically-computed undulations (using a Stokes integration procedure, and least squares collocation having an internal r.m.s. agreement of plus or minus 1 cm in undulation differences). The two sets of undulation differences have an r.m.s. discrepancy of plus or minus 5 cm while the average station separation is of the order of 14 km. This good agreement suggests that gravimetric data can be used to compute accurate geoid undulation differences that can be used to convert ellipsoidal height differences obtained from GPS to orthometric height differences.

Engelis, T.↗

NASA NTRS1986

Speckle interferometry applied to asteroids and other solar system objects

Speckle interferometry is a high angular resolution technique that allows study of resolved asteroids. By following the changing size, shape, and orientation of minor planets, and with a few general assumptions (e.g., geometric scattering, triaxial ellipsoid figures, no albedo features), it is possible to directly measure an asteroid's true dimensions and the direction of its spin axis in one or two nights. A particular subset of triaxial ellipsoid figures are equilibrium shapes, and would imply that some asteroids are thoroughly fractured. Such shapes if they exist among the asteroids would allow a determination of bulk density since there is a unique relation among spin period, size, shape, and density. The discovery of even a single rubble pile, (just as the finding of even one binary asteroid by speckle interferometric techniques) would drastically alter the notion of asteroids as small solid planets. The Pluto/Charon system was studied to aid in improving the orbital elements necessary to predict the eclipse/occultation season currently in progress. Four asteroids were reduced to their size, shape, and pole direction: 433 Eros, 532 Herculina, 511 Davida, and 2 Pallas.

Drummond, J. D.↗

NASA NTRS1986

Stress on the surface of Venus: Analysis of data provided by Venera-15 and Venera-16

There are no large-scale sedimentation and erosion processes on Venus, therefore the observed deformation must be formed on the surface or close to it, and in the ellipsoids of stresses one of the main axes must be perpendicular to the surface. According to the deformation visible on photography from Venera-15, 16, the orientations of the ellipsoids of stresses are established in the different sections of the Montes Maxwell and the northern parquet. A geological model is established, according to which the Montes Maxwell is an arched vault and the region to the south a conjugate bend, separated by a shift zone.

Ronka, L. B.↗

NASA NTRS1987

Shapes of small satellites

The accurate measurement of limb coordinates on small satellite is the major technique for evaluating their sizes and shapes in the absence of good stereoscopic image coverage. The shapes of satellites may be clues to their internal structure if they are relaxed into ellipsoids. The distinction between irregular and ellipsoidal satellites can now be made quantitatively with the availability of many accurate limb profiles of satellites. The residuals from these fit ellipses provide a convenient and quantitative measure of the topography on the satellites. Departures from gravitational (and tidal) equipotentials would be greater, but on the average this is a good measure of the relaxed or nonrelaxed nature of the shape of the objects. The limb topography is also related to specific forms on the objects, and a systematic survey of these forms on small and larger objects is underway.

Thomas, P.↗

NASA NTRS1986

Breakdown characteristics of an isolated conducting object in a uniform electric field

A laboratory experiment was conducted to determine the physical processes involved in the electrical breakdown of a particular spark gap arrangement. The gap consists of an isolated conducting ellipsoid located midway between two large flat electrodes. Gradual increase of the applied electric field, E, in the gap produces corona on the ellipsoid tips followed by flashover in a leader-arc sequence. The leader phase consists of the abrupt formation of ionized channels which partially bridge the gap and then decay prior to the arc. Measurements of dE/dt and of current were made, and photographs were taken with an image converter. Experimental parameters are listed.

Grothaus, M. G.↗

NASA NTRS1984

Simulation and analysis of airborne antenna radiation patterns

The objective is to develop an accurate and efficient analytic solution for predicting high frequency radiation patterns of fuselage-mounted airborne antennas. This is an analytic study of airborne antenna patterns using the Uniform Geometrical Theory of Diffraction (UTD). The aircraft is modeled in its most basic form so that the solution is applicable to general-type aircraft. The fuselage is modeled as a perfectly conducting composite ellipsoid; whereas, the wings, stabilizers, nose, fuel tanks, and engines, are simulated as perfectly conducting flat plates that can be attached to the fuselage and/or to each other. The composite-ellipsoid fuselage model is necessary to successfully simulate the wide variety of real world fuselage shapes. Since the antenna is mounted on the fuselage, it has a dominant effect on the resulting radiation pattern so it must be simulated accurately, especially near the antenna. Various radiation patterns are calculated for commercial, private, and military aircraft, and the Space Shuttle Orbiter. The application of this solution to numerous practical airborne antenna problems illustrates its versatility and design capability. In most cases, the solution accuracy is verified by the comparisons between the calculated and measured data.

Kim, J. J.↗

NASA NTRS1988

The shape and internal structure of Mimas

The present effort to determine the shape of Mimas proceeds on the basis of limb profiles from six Voyager images; the fitting of ellipses to the limbs indicates that the shape is a triaxial ellipsoid. The satellite mass determined by Kozai (1957), in conjunction with a second-order theory for the ellipsoidal figure of equilibrium, leads to a satellite mean radius determination of 198.8 + or - 0.6 km, and a mean density of 1.137 + or - 0.018 g/cu cm. It is suggested that Mimas is probably differentiated, with a rocky core and a water-ice crust; alternatively, Mimas has a cosmic composition of ice and rock and is undifferentiated.

Dermott, Stanley F.↗

NASA NTRS1988

Radii, shapes, and topography of the satellites of Uranus from limb coordinates

The present use of limb coordinates to ascertain radii, shape and local topographic characteristics for the five large Uranian satellites directly measured satellite ellipsoidal shapes, determining radii with subpixel accuracy. While Umbriel, Titania, and Oberon are spherical, Miranda and Ariel are noted to be ellipsoids whose equatorial bulges agree with previously determined mean densities. Miranda's topography exhibits substantial deformation of cratered terrain and the younger coronae, as well as uplift and complex faulting at coronae margins.

Thomas, P. C.↗

NASA NTRS1988

Effective permittivity of dielectric mixtures

General mixing formulas are derived for discrete scatterers immersed in a host medium. The inclusion particles are assumed to be ellipsoidal. The electric field inside the scatterers is determined by quasi-static analysis, assuming the diameter of the inclusion particles to be much smaller than one wavelength. The results are applicable to general multiphase mixtures, and the scattering ellipsoids of the different phases can have different sizes and arbitrary ellipticity distribution and axis orientation, i.e., the mixture may be isotropic or anisotropic. The resulting mixing formula is nonlinear and is suitable for iterative solutions. The formula contains a quantity called the apparent permittivity, and with different choices of this quantity, the result leads to the generalized Lorentz-Lorenz formula, the generalized Polder-van Santen formula, and the generalized coherent potential-quasicrystalline approximation formula. The results are applied to calculating the complex effective permittivity of dry and wet snow, and sea ice.

Sihvola, Ari H.↗