Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

First-Principles Study on the Electronic Properties of PDPP-Based Conjugated Polymer via Density Functional Theory

In this study, we focus on computational predictions of the electronic and optical properties of a one-dimensional periodic model of a single chain of a diketopyrrolopyrrole (DPP)-based conjugated polymer (PDPP3T) as a function of electronic configuration changes due to charge injection. Here, we employ density functional theory (DFT) to explore the ground-state and excited-state electronic properties as well as optical properties influenced by charge injection. We utilize both the Heyd–Scuseria–Ernzerhof (HSE06) and Perdew–Burke–Ernzerhof (PBE) functionals to predict the band gap and compute the absorption spectrum. Our DFT results point out that utilizing the HSE06 functional in conjunction with momentum sampling over the Brillouin zone can appropriately predict the band gap and absorption spectrum in good agreement with experimental data. Moreover, we explore the influence of charge-carrier injection on the electronic configuration of the PDPP3T polymer. Our results indicate that the injection of charge carriers into the PDPP3T semiconducting polymer model greatly affects the electrical properties and ends in a low band gap and high mobility of charge carriers in PDPP3T polymers, offering the potential to tailor the material electronic performance for organic photovoltaic and optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Nanoscale Three-Dimensional Imaging of Degradation in Composite Si-Containing Anodes

The use of silicon (Si) in next-generation lithium-ion battery (LIB) anodes has the potential to dramatically improve electrochemical performance over current LIB graphite (Gr) anodes, due to silicon’s higher specific capacity.1 However, widespread implementation of Si-containing anodes is inhibited by issues such as significant Si volume expansion during lithiation and an unstable solid-electrolyte interphase (SEI), resulting in unreliable performance and poor cycle life. Currently, composite anodes with both Si and graphite active materials are used to increase capacity and mitigate some of the limitations associated with Si. In composite electrodes with a heterogeneous distribution of components with varying electrical properties (including Si, Gr, conductive carbon additive, and binder), it is important to understand the local distribution of each component to correlate with electrochemical processes, particularly localized degradation and heterogeneous aging, and to optimize performance. To investigate Si-containing composite anodes in the nanoscale, we use scanning spreading resistance microscopy (SSRM), a form of scanning probe microscopy (SPM) that probes local electronic resistivity. By examining the intrinsic electronic resistivity contrast between the anode components, separate phases can be distinguished and understood within the composite structure.2 This work studies the effect of electrochemical cycling in two different electrolytes on component distribution and aging by comparing the electrical and structural evolution of composite Si-graphite electrodes and SEI before and after charge-discharge cycling. 1. W. J. Zhang. A review of the electrochemical performance of alloy anodes for lithium-ion batteries J. Power Sources 196 13–24 (2011). 2. C. Stetson, Z. Huey, A. Downard, Z. Li, B. To, A. Zakutayev, C.-S. Jiang, M. Al-Jassim, D. Finegan, S.-D. Han and S. DeCaluwe: Three-Dimensional Mapping of Resistivity and Microstructure of Composite Electrodes for Lithium-Ion Batteries. ACS Nano Letters Accepted (2020).

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

New precious metal containing normal spinels: LiRhRu 1-x Ir x O 4 , LiFeIr 1-x Ru x O 4 , and LiCoIr 1-x Ru x O 4

Large spin-orbit-coupled cations in geometrically frustrated crystal structures have the most suitable setting for exploring novel exotic states of matter. Spinel oxides (AM 2 O 4 ) are well-known examples of geometrically frustrated systems. In this study, we report for the first time the synthesis of compositions LiRhRu 1-x Ir x O 4 (x = 0–0.5), LiFeIr 1-x Ru x O 4 (x = 0–0.5), and LiCoIr 1-x Ru x O 4 (x = 0–0.3) containing precious metal cations on edge-sharing octahedral M-sites, and systematically investigate their magnetic and electrical properties. 57 Fe Mössbauer spectroscopy revealed that iron is trivalent in all LiFeIr 1-x Ru x O 4 solid solutions. Magnetic measurements indicate deviations from theoretical spin-only magnetic moment values, indicating the influence of spin-orbit coupling owing to the presence of 4d and 5d block elements. The LiFeIr 1-x Ru x O 4 series shows spin-glass-like freezing behavior with T g ≈ 20 K, and a small frustration index (f ≈ 1-2), indicating that the frustration originates from site disorder. LiRhRu 1-x Ir x O 4 and LiCoIr 1-x Ru x O 4 exhibit strongly geometrically frustrated magnetism. Electrical resistivity measurements as a function of temperature indicate that all phases are semiconducting. Seebeck coefficient measurements show that LiRhRu 1-x Ir x O 4 and LiFeIr 1-x Ru x O 4 are p-type semiconductors with holes as the major charge carriers. A sign reversal of the Seebeck coefficient indicates both holes and electrons as carriers for LiCoIr 1-x RuxO 4 (x = 0–0.2), but only holes as major carriers for x = 0.3. Here, the Seebeck coefficient and power factor increase drastically in the LiRhRu 1-x Ir x O 4 solid solution with Ir substitution, reaching a maximum of ≈ +125 μV/K and ≈2.3×10 -6 W/mK 2 at ∼650 K for x = 0.5.

Charge carriers↗
DOE OSTI2026

Fast Growth of Ga2O3 on Highly Offcut (100)-Oriented Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. More importantly, the impact ionization coefficients along the [100] direction are low, leading to the highest possible critical fields. This is advantageous compared to the current state of the art, (001), due to reduced surface defects and increased possible breakdown voltage. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption, and on-axis (100) growth easily forms twin domains. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction. These films show step-flow growth from (20-1) step-edges and high electron mobility due to suppressed twins. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (>5 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3 and critical breakdown field in Schottky barrier diodes comparable with state-of-the-art (001) Ga2O3 without edge termination.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Epitaxy of Beta-Ga2O3 on Highly-Offcut (Greater than 10 Degrees) Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction.1 These films show step-flow growth from (-201) step-edges and high electron mobility. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (4.8 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe 100% reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Functional Materials ZnO@ZIF-8 Heterostructures for Neuromorphic Synaptic Devices

Metal-Organic Frameworks have shown great promise for memristive synaptic devices because of their adaptable electrical properties and inherent porosity, which help in efficient ion transport and storage of functional molecules. However, the limited conductivity and sensitivity to moisture associated with most MOF materials hinder their use in electronic applications. In this study, MOFs derived from metabolites have been synthesized, using ZnO as a self-sacrificial metallic source to grow Zeolitic Imidazolate Framework-8 (ZIF-8), forming ZnO@ZIF-8 heteronanostructures for neuromorphic applications. These hybrids ZnO@ZIF-8 act as promising candidates for advanced electronic applications. Through systematic investigations, including a comparison of ZnO@ZIF-8 bilayer devices with ZnO single-layer counterparts, a significant discovery emerged. The bilayer synaptic devices outperformed their single layer counterparts in electrical characteristics, as evidenced by Current-Voltage curve analysis and Long-Term Potentiation/Long Term Depression (LTP/LTD) measurements. Additionally, the ZnO layer thickness (10, 30, 50 nm) has been emphasized and the effects of annealing at 300°C in a vacuum were carefully studied for Neuromorphic Synaptic Devices. Remarkably, the 10 nm ZnO layer exhibited the lowest set voltage and a consistent On/Off ratio. This work marks a significant advancement in understanding bilayer synaptic devices, highlighting the crucial role of ZIF-8 in shaping the future of neuromorphic systems

Kolleboyina, Jayaramulu↗
DOE OSTI2021

Ferroic phase transitions and magnetoelectric coupling in cobalt doped BaTiO 3

Magnetoelectric (ME) materials exhibit interesting physics with cross coupling between ferroelectric and magnetic order parameters and thus strong potential to be utilized in memory, spintronics and other multifunctional electronic/magnetic devices. Doping of suitable transition metals in ferroelectrics can induce magnetism and ME coupling and modify the physical properties. Here, we report the structural, electronic, magnetic and ME coupling of 3.5, 5 and 7.5 mol% cobalt doped BaTiO 3 (BTO) ceramics. X-ray diffraction and Raman spectroscopy indicate that the samples are single phase having a tetragonal crystal structure with P4mm symmetry. The tetragonality ratio is found to decrease with increasing cobalt content. We observed a Fano-like asymmetric peak in the [A 1 (LO 1 )] Raman mode at ~173 cm -1 in all the cobalt doped BTO samples. The cobalt dopants are shown to be uniformly distributed throughout the surface of the samples. We observed a lowering of the ferroelectric transition temperature and increasing diffusivity parameter with increasing cobalt concentration. The electrical properties of all the samples have been investigated in detail by impedance spectroscopy and ac conductivity studies before and after the ferroelectric phase transitions. All the samples show hysteretic ferroelectric behavior with a clear saturation state that decreases with increasing cobalt content. The observed ferroelectricity in these samples is intrinsic in nature. The 3.5% cobalt doped BTO sample exhibits paramagnetic behavior whereas the 5 and 7.5% cobalt doped BTO samples show ferromagnetic ordering below 43 K. The 7.5% cobalt doped BTO samples show significant ME coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Selective thermal neutron transmutation doping with Gd masks in GaN semiconductors

For the first time, selective neutron transmutation doping was successfully performed on GaN through Gd masks, showing the feasibility of patternable doping through neutron irradiations. In collaborating with Oak Ridge National Laboratory, GaN with Gd masks was irradiated by directional neutrons. By using the Gd properties with high neutron absorption cross-sections, it was confirmed that the area covered by Gd masks on GaN was completely shielded from neutrons, and the uncovered area was doped with the generated Ge and 14 C. Property differences were clearly identified in various ways when comparing the area exposed by neutrons and the area unexposed by neutrons. The discoloration by the ejected protons and elastic scattering of neutrons appeared only in the exposed area while the unexposed area remained the same as before irradiation. The aspect ratio of the patterned profile of GaN was estimated by comparing patterns on the front and backside. From energy dispersive X-ray spectroscopy spectra and secondary ion mass spectrometry measurement, the concentration difference between Ge and 14 C as well as the exact concentration of produced 14 C was also checked. Further, Schottky barrier diodes on the selectively doped GaN were fabricated and investigated to study the electrical properties.

42 ENGINEERING↗
DOE OSTI2024

Tailoring Interlayer Coupling in Few-Layer MoS 2 with Stacking Configuration

Here we manipulated the stacking configuration of a few-layer MoS 2 to investigate the impact of interlayer coupling on electrical band engineering. By simultaneously synthesizing two distinct stacking types of MoS2 islands, wedding cake (W) and spiral (S), on the same substrate, we explored layer-dependent electrical properties under identical experimental conditions. We used multiple scanning probe microscopy techniques to map local electronic properties with respect to the number of layers, stacking configurations, and local heterogeneities. First-principles calculations verified the role of distinct interlayer coupling in terms of the interlayer distance. Our findings highlight the critical role of interlayer coupling in applications of transition metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A-type antiferromagnetic order in MnBi 4 Te 7 and MnBi 6 Te 10 single crystals

MnBi 4 Te 7 and MnBi 6 Te 10 are two members with n = 2 and 3 in the family of MnBi 2 n Te 3 n + 1 where the n = 1 member, MnBi 2 Te 4 , has been intensively investigated as the first intrinsic antiferromagnetic topological insulator. In this work, we report the A-type antiferromagnetic order in these two compounds by measuring magnetic properties, electrical and thermal transport, specific heat, and single-crystal neutron diffraction. Both compounds order into an A-type antiferromagnetic structure as does MnBi 2 Te 4 with ferromagnetic planes coupled antiferromagnetically along the crystallographic c axis. While no evidence for any in-plane ordered moment is found for MnBi 2 Te 4 or MnBi 6 Te 10 , weak reflections at half- L positions along the [0 0 L ] direction are observed for MnBi 4 Te 7 suggesting an in-plane ordered moment around 0.15 μ B / Mn . The ordering temperature, T N , is 13 K for MnBi 4 Te 7 and 11 K for MnBi 6 Te 10 . The magnetic order is also manifested in the anisotropic magnetic properties. Furthermore, for both compounds, the interlayer coupling is weak and a spin-flip transition occurs when a magnetic field of around 1.6 kOe is applied along the c axis at 2 K. As observed in MnBi 2 Te 4 , when cooling across T N , no anomaly was observed in the temperature dependence of thermopower. On the other hand, critical scattering effects are observed in thermal conductivity although the effect is less pronounced than that in MnBi 2 Te 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Response of GaN-Based Semiconductor Devices to Ion and Gamma Irradiation

GaN has electronic properties that make it an excellent material for the next generation of power electronics; however, its radiation hardening still needs further understanding before it is used in radiation environments. In this work we explored the response of commercial InGaN LEDs to two different radiation environments: ion and gamma irradiations. For ion irradiations we performed two types of irradiations at the Ion Beam Lab (IBL) at Sandia National Laboratories (SNL): high energy and end of range (EOR) irradiations. For gamma irradiations we fielded devices at the gamma irradiation facility (GIF) at SNL. The response of the LEDs to radiation was investigated by IV, light output and light output vs frequency measurements. We found that dose levels up to 500 krads do not degrade the electrical properties of the devices and that devices exposed to ion irradiations exhibit a linear and non- linear dependence with fluence for two different ranges of fluence levels. We also performed current injection annealing studies to explore the annealing properties of InGaN LEDs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Approaching the Practical Conductivity Limits of Aerosol Jet Printed Silver

Previous efforts to directly write conductive metals have been narrowly focused on nanoparticle ink suspensions that require aggressive sintering (>200°C) and result in low-density, small-grained agglomerates with electrical conductivities <25% of bulk metal. Here, we demonstrate aerosol jet printing of a reactive ink solution and characterize high-density (93%) printed silver traces having near-bulk conductivity and grain sizes greater than the electron mean free path, while only requiring low temperature (80°C) treatment. We have developed a predictive electronic transport model which correlates the microstructure to the measured conductivity and identifies a strategy to approach the practical conductivity limit for printed metals. Our analysis of how grain boundaries and tortuosity contribute to electrical resistivity provides insight into the basic materials science that governs how an ink formulator or process developer might approach improving the conductivity. Transmission line measurements validate that electrical properties are preserved up to 20GHz, which demonstrates the utility of this technique for printed RF components. Finally, this work reveals a new method of producing robust printed electronics that retain the advantages of rapid prototyping and three-dimensional fabrication while achieving the performance necessary for success within the aerospace and communications industries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

GaN Core-shell Nanofin Vertical Transistor (CoNVerT): A New Direction for Power Electronics (Final Scientific/Technical Report)

A novel power transistor architecture, the GaN c ore-shell n anofin ver tical transistor (CoNVerT) to address fundamental challenges in realizing the ultimate limit of GaN power transistor performance was explored experimentally. This technology promises ultra-high-efficiency high voltage/high power applications (e.g. DC/DC converters, motor control, fast charging, actuation), as well as to operate in harsh environments. The device exploits a vertical superjunction structure based on an experimentally-validated core-shell nanofin growth process in which lateral p-n heterojunctions are formed in a single growth step, while still maintaining vertical current flow for compact die size and low cost. The concept leverages the best properties of GaN for mid-range voltage applications: high mobility, high breakdown voltage, and native heterojunction enhancement-mode operation. Due to the crystallographic nature of the nanofin growth by molecular beam epitaxy, the sidewall heterojunctions occur on non-polar planes, resulting in ultra-smooth interfaces for high mobility, no sidewall etch damage and related surface/interface states, and elimination of piezoelectric effects that can limit reliability in conventional structures. This also facilitates superjunction formation for maximum device performance, and the selective-area growth of the nanofin results in dislocation-free growth, even on low-cost Si (111) substrate. In this program, core-shell nanofins were grown by molecular beam epitaxy, test structures to evaluate the doping, resistivity, and other electrical properties were fabricated, and the material and test structures were characterized in detail. The work identified clear potential (e.g., the doping was well controlled as required for superjunction concepts), but also additional areas that require additional effort to resolve (some unexpected crystal defects were encountered that require additional engineering to overcome). Simulation studies of the proposed concept validate that the fundamental approach is very promising, but additional effort in experimental realization is needed.

42 ENGINEERING↗
DOE OSTI2025

Stability, growth, and doping of In 2 (Si, Ge) 2 O 7 : Promising n -type wide-bandgap semiconductors

In this paper, we investigate, computationally and experimentally, the phase stability, electronic structure properties, and the propensity for n-type doping of In 2 X 2 O 7 (X = Si, Ge) ternary oxides. This family of materials contains promising novel wide-gap semiconductors based on their estimated high n-type Baliga figures of merit and acceptable thermal conductivity for power electronics applications. Here, we predict that both In 2 Si 2 O 7 and In 2 Ge 2 O 7 are n-type dopable, with Zr providing between 10 16 and above 10 21 cm −3 net donor concentrations under O-poor conditions, depending on the chemistry, structure (ground-state thortveitite or high-pressure pyrochlore), and synthesis temperature. To verify our predictions, we synthesize Zr-doped In 2 Ge 2 O 7 in the thortveitite structure and measure its electrical properties. Initial thin-film growth and annealing lead to polycrystalline thin films with bandgaps over 4 eV and confirm Zr doping predictions by achieving electron concentrations at 10 14 –10 16 cm −3 even under O-rich conditions. While future epitaxial growth development is still needed, this study establishes In 2 X 2 O 7 as promising n-type wide-gap semiconductors for power electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Investigation of Interlayer Dielectric in BaTiO 3 /III–Nitride Transistors

In this paper, the impact of varying the thickness of the Al 2 O 3 interlayer dielectric on the electrical characteristics of BaTiO 3 /III-nitride transistors is investigated. In the findings, it is revealed that a minimum thickness of 8 nm for the Al 2 O 3 layer is crucial to maintain high device performance and protect against sputtering-induced damage during BaTiO 3 deposition. The fabricated BaTiO 3 /Al 2 O 3 /AlGaN/GaN high electron mobility transistors exhibit exceptional electrical properties, including a maximum current density of 700 mA mm –1 , an on-resistance of 5 Ω mm, an I ON /I OFF ratio of 10 7 , a subthreshold slope of 119 mV dec –1 , and significantly reduced gate leakage current. The devices with the optimal 8 nm Al 2 O 3 thickness demonstrates excellent agreement between theoretical and experimental values for effective mobility, achieving a value of 1188 cm 2 V –1 ·s at a 2D electron gas density of 10 13 cm –2 . Furthermore, in the study, it is confirmed that increasing the Al 2 O 3 thickness also improves the quality of interface charge density, as evidenced by the results obtained from capacitance–voltage measurements. In these findings, the critical role of controlling the Al 2 O 3 thickness in optimizing the electrical characteristics and overall performance of BaTiO 3 /III-nitride transistors are highlighted.

42 ENGINEERING↗
DOE OSTI2020

Sub-molecular structural relaxation at a physisorbed interface with monolayer organic single-crystal semiconductors

Arranging molecules into highly symmetric, topological crystal structures has been recognized as the best approach to functionalize electronic properties in molecular crystals, where the constituent molecules have been assumed to be rigid in shape. Here, in striking contrast, we demonstrate that the molecules in a monolayer organic crystal can undergo a significant deformation in proximity to the substrate, which is reflected by an asymmetry in the electron density profile. X-ray reflectivity and X-ray absorption spectroscopies in conjunction with density-functional theory calculations reveal that the highly planarized π-core are deformed into a bent shape, while the bulk lattice parameters are maintained. The molecular shape change is found to be perfectly suppressed in a bilayer single crystal, which leads to a 40% increase in mobility in the bilayer crystal. Our finding of a unique, sub-molecular scale shape change in monolayer single crystals can offer possibilities for functionalizing electrical properties via nano-scale physisorption.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Doping Effects on Multivalence States, Electronic Structure, and Optical Band Gap in LaCrO 3 under Varied Atmospheres: An Integrated Experimental and Density Functional Theory Study

Doping effects on the valence state, electronic structure, and optical band and the effects on electrical conductivity were studied on the doped lanthanum chromite (LaCrO 3 ) system. The specific compositions studied were La 1–x Ca x CrO 3 (LCCx), La 1–x Sr x CrO 3 (LSCx), and La 0.8 Sr 0.2 Cr 1–x Mn x O 3 (LSCMx) (0.1 ≤ x ≤ 0.4). The powders were synthesized using a modified Pechini sol–gel method, and the ceramic samples were densified using a reactive sintering method resulting in densities >96% theoretical. X-ray photoelectron spectroscopy (XPS) was completed to characterize the defect states and cationic valence compensation as a result of divalent (Ca 2+ or Sr 2+ ) and trivalent (Mn 3+ ) substitutions. XPS was completed for samples tested in oxidizing and reducing atmospheres (up to 1500 °C), which provided insights into the oxidation state transitions induced by the Ca 2+ and Sr 2+ dopants. The work notably demonstrated, for the first time, the oxidation/reduction transitions of Cr 4+ to Cr 3+ in Sr 2+ /Mn 3+ co-doped samples under reducing atmospheres. Reflectance UV–vis spectrophotometry optical band gap measurements were also completed for the same materials; a decrease in the optical band gap (2.81–3.12 eV) was shown with increased substitution, suggesting electronic structure modifications in the LaCrO 3 perovskite. Density functional theory calculations validated experimental trends, predicting a diminishing band gap with a rising dopant concentration. The transition in Cr oxidation states was attributed to the presence of divalent/trivalent cations. These findings contribute some insights into methods to tune the LaCrO 3 electrical properties for various low- and high-temperature applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Advanced Multi-Dimensional Capacitance Sensors Based Subsea Multiphase Mass Flow Meter to Measure and Monitor Offshore Enhanced Oil

This innovation is based on advanced multi-dimensional extensions of ECVT sensors that involve ECVT, Displacement Current Phase Tomography (DCPT), Maxwell-Wagner-Sillars polarization effect (MWS), and velocimetry which exploit the variation of electric properties between the oil, water, and gas coming out of the well. Capacitance sensors are embedded on the inside of a pipe spool and placed in-line with the subsea oil line piping on the extraction end of the well. The difference in dielectric, dielectric loss, surface polarization, and velocity of each phase are used in the multi-dimensional algorithm to measure the volume fraction, distribution, velocity, mass flow rate, and flow regime of the mixture moving through the pipe.

02 PETROLEUM↗