Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electric field effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Refractive-index profile and physical process determination in thick gratings in electrooptic crystals

A method for determining the refractive index profile of thick phase gratings in linear electrooptic crystals is presented. This method also determines the effective photovoltaic electric field and the relative contributions of diffusion and drift during hologram recording. The method requires only a knowledge of the modulation ratio during hologram recording and the fundamental and the higher-order diffraction efficiencies of the grating. As an illustration of the method, the refractive index profile, the effective photovoltaic field, and the relative contributions of diffusion and drift are determined from experimental measurements for a lithium niobate holographic grating.

Su, S. F.↗
DOE OSTI2023

Optoelectronic and structural characterization of trapezoidal defects in 4H-SiC epilayers and the effect on MOSFET reliability

To this day, trapezoidal defects are found in clusters and high counts in wafers representing the industry standard in terms of material quality being produced. This study sheds light on the nature, origin, behavior, and impact of this defect on device yield and reliability. Trapezoidal defects in 4H-SiC epitaxial layers were investigated by photoluminescence (PL) imaging, scanning electron microscopy (SEM), cathodoluminescence spectrum imaging (CLSI), SEM electron beam induced current (EBIC) imaging, and by transmission electron microscopy (TEM) observation. The bar-shaped stacking faults were identified by the PL and CL measurements with a peak emission wavelength of 420 and 450 nm. An optoelectronic behavioral study based on the recombination enhanced dislocation glide mechanism revealed how expanding dislocations and stacking faults interact with each other. Combining the luminescence and microscopy results, the nature of the stacking faults was identified as being a combination of Shockley-type and Frank-type stacking faults. The TEM analysis showed that these defects originate from the substrate and the stacking sequences of some of the faults were determined as (…2, 4, 2…) and (…2, 3, 2…) in the Zhdanov's notation by high-resolution TEM. The origin of this defect is speculated based on our results and previous reports. The EBIC imaging showed that the high density of SFs in these towers is a strong site of carrier recombination, which presumably has an impact on the transfer characteristics of SiC devices. Furthermore, these defects have shown to impact metal oxide semiconductor field effect transistors electrical performance via an increase in the on-state resistance depending on the coverage percentage of the tower of defects in the active area of the device.

4H-SiC↗
DOE OSTI2022

Topological Model of the Pseudogap State: Experimental Signatures

We summarize the basic ideas of our topological model of the pseudogap state of high temperature superconductors (HTS) as a condensate of charged magnetic monopoles, with a focus on new experimental signatures. These include the surface quantum Hall effect, the generation of electric fields when applying magnetic fields by the oblique Meissner effect, and the generation of circular electric fields surrounding electric currents by the oblique Ampère law.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Elucidating the Synergic Effect in Nanoscale MoS 2 /TiO 2 Heterointerface for Na‐Ion Storage

Abstract Interface engineering in electrode materials is an attractive strategy for enhancing charge storage, enabling fast kinetics, and improving cycling stability for energy storage systems. Nevertheless, the performance improvement is usually ambiguously ascribed to the “synergetic effect”, the fundamental understanding toward the effect of the interface at molecular level in composite materials remains elusive. In this work, a well‐defined nanoscale MoS 2 /TiO 2 interface is rationally designed by immobilizing TiO 2 nanocrystals on MoS 2 nanosheets. The role of heterostructure interface between TiO 2 and MoS 2 by operando synchrotron X‐ray diffraction (sXRD), solid‐state nuclear magnetic resonance, and density functional theory calculations is investigated. It is found that the existence of a hetero‐interfacial electric field can promote charge transfer kinetics. Based on operando sXRD, it is revealed that the heterostructure follows a solid‐solution reaction mechanism with small volume changes during cycling. As such, the electrode demonstrates ultrafast Na + ions storage of 300 mAh g −1 at 10 A g −1 and excellent reversible capacity of 540 mAh g −1 at 0.2 A g −1 . This work provides significant insights into understanding of heterostructure interface at molecular level, which suggests new strategies for creating unconventional nanocomposite electrode materials for energy storage systems.

25 ENERGY STORAGE↗
NASA NTRS2000

Numerical Model of the Plasma Sheath Generated by the Plasma Source Instrument Aboard the Polar Satellite

The plasma sheath generated by the operation of the Plasma Source Instrument (PSI) aboard the POLAR satellite is studied by using a 3-dimensional Particle-In-Cell (PIC) code. When the satellite passes through the region of low density plasma, the satellite charges to positive potentials as high as 4050Volts due to the photoelectrons emission. In such a case, ambient core ions cannot accurately be measured or detected. The goal of the onboard PSI is to reduce the floating potential of the satellite to a sufficiently low value so that the ions in the polar wind become detectable. When the PSI is operated, an ion-rich Xenon plasma is ejected from the satellite, such that the floating potential of the satellite is reduced and is maintained at about 2Volts. Accordingly, in our 3-dimensional PIC simulation, we considered that the potential of the satellite is 2Volts as a fixed bias. Considering the relatively high density of the Xenon plasma in the sheath (approx. 10 - 10(exp 3)/cc), the ambient plasma of low density (less than 1/cc) is neglected. In the simulations, the electric fields and plasma dynamics are calculated self-consistently. We found that an "Apple" shape positive potential sheath forms surrounding the satellite. In the region near the PSI emission, a high positive potential hill develops. Near the Thermal Ion Detection Experiment (TIDE) detector away from the PSI, the potentials are sufficiently low for the ambient polar wind ions to reach it. In the simulations, it takes about a hundred electron gyroperiods for the sheath to reach a quasi-steady state. This time is approximately the time taken by the heavy Xe(+) ions to expand up to about one average Larmor radius of electrons from the satellite surface. Using the steady state sheath, we performed trajectory calculations to characterize the detector response to a highly supersonic polar wind flow. The detected ions' velocity distribution shows significant deviations from a shifted Maxwellian in the ambient polar wind population. The deviations are caused by the effects of electric fields on the ions' motion as they traverse the sheath.

Leung, Wing C.↗
NASA NTRS2002

Pulsar Polar Cap Heating and Surface Thermal X-ray Emission: Curvature Radiation Pair Fronts - 1

We investigate the effect of pulsar polar cap (PC) heating produced by positrons returning from the upper pair formation front. Our calculations are based on a self-consistent treatment of the pair dynamics and the effect of electric field screening by the returning positrons. We calculate the resultant X-ray luminosities and discuss the dependence of the PC heating efficiencies on pulsar parameters, such as characteristic spin-down age, spin period, and surface magnetic field strength. In this study we concentrate on the regime where the pairs are produced in a magnetic field by curvature photons emitted by accelerating electrons. Our theoretical results are not in conflict with the available observational x-ray data and suggest that the effect of PC heating should significantly contribute to the thermal x-ray fluxes from middle-aged and old pulsars. The implications for current and future x-ray observations of pulsars are briefly outlined.

Harding, Alice K.↗
NASA NTRS2020

Conditions of Loss Cone Filling by Scattering on the Curved Field Lines for 30 keV Protons During Geomagnetic Storm as Inferred From Numerical Trajectory Tracing

The rate of pitch angle scattering on the curved magnetic field lines is well parameterized by the ratio of the minimum field line curvature radius to the maximum effective particle gyroradius (K = RC/rg). The critical value of this ratio (Kcr) corresponding to the loss cone filling is of special interest since it corresponds to the low altitude isotropic boundaries (IBs). The early theoretical estimates gave Kcr = 8, whereas recent estimations of the K parameter on the field lines corresponding to the observed IBs during the geomagnetic storms revealed KIB values in the range of 3–30. We numerically trace the trajectories of the 30 keV protons in the magnetic field of the global magnetohydrodynamic simulation of the intense storm in order to infer statistical distribution of Kcr. The electric field and effects of nonstationarity are neglected in this study. It is found that although the Kcr values do show some variations during the course of the storm, its range is rather narrow 4 < Kcr < 8. The result suggests that higher KIB values found in the observational studies, if not caused by the magnetosphere-ionosphere mapping error, should be attributed to some other mechanism of pitch angle scattering. The Kcr values tend to be lower (4–6) during the main phase because the region of low K values approaches the Earth and the equatorial loss cone size becomes larger due to a larger equatorial magnetic field in the near earth region. The remaining variation of Kcr is explained by the presence of the guide component of the magnetic field.

S Dubyagin↗
DOE OSTI2026

Electrically Accelerated Mechanochemical Film Formation by a Phosphonium Phosphate Ionic Liquid: An In Situ Chemical Kinetics Investigation

Powertrains in electric vehicles are exposed to stray currents that accelerate wear and cause failure of mechanical components. These durability issues are further aggravated when using low-viscosity lubricants, which are desired for energy efficiency but create harsher contact conditions at sliding interfaces. This study investigates a phosphonium phosphate ionic liquid as a performance-enhancing additive in a low-viscosity base oil for lubricating electrified sliding interfaces. Ionic liquids can adsorb and react on contact interfaces via stress-assisted chemical reactions, generating nanometric tribofilms that provide protection against wear. However, the effect of electric fields on the mechanochemistry of ionic liquids is poorly understood, hindering their adoption in lubricants for electrified powertrains. This article reports an in situ optical interferometry study of ionic liquid derived tribofilm growth kinetics at stressed sliding/rolling interfaces under direct currents. The application of electric currents accelerated tribofilm formation up to a critical current density (∼1.4 A/mm 2 ), beyond which pitting-induced wear dominated. The tribofilms were composed of iron phosphates, iron oxides, and carbon species, with iron oxides becoming predominant under applied currents. These tribofilms prevented the scuffing failure of steel surfaces under electrified conditions. Based on the results, a kinetic model is proposed that integrates electric current effect into the classical stress-assisted thermal activation framework to allow prediction of tribofilm growth at electrified sliding contacts. This framework provides crucial guidance for designing next-generation lubricants for electrified transportation and power generation systems.

additives↗
NASA NTRS1996

Electrohydrodynamic Pool Boiling in Reduced Gravity

This research is concerned with studying the effects of applied electric fields on pool boiling in a reduced-gravity environment. Experiments are conducted at the NASA Lewis 2.2 sec Drop tower using a drop rig constructed at UC Davis. In the experiments, a platinum wire is heated while immersed in saturated liquid refrigerants (FC-72 and FC-87), or water, causing vapor formation at the wire surface. Electric fields are applied between the wire surface and an outer screen electrode that surrounds the wire. Preliminary normal-gravity experiments with water have demonstrated that applied electric fields generated by the rig electronics can influence boiling characteristics. Reduced-gravity experiments will be performed in the summer of 1996. The experiments will provide fundamental data on electric field strengths required to disrupt film boiling (for various wire heat generation input rates) in reduced gravity for a cylindrical geometry. The experiments should also shed light on the roles of characteristic bubble generation times and charge relaxation times in determining the effects of electric fields on pool boiling. Normal-gravity comparison experiments will also be performed.

Shaw, Benjamin D.↗
NASA NTRS1998

Analysis and Testing of Plates with Piezoelectric Sensors and Actuators

Piezoelectric material inherently possesses coupling between electrostatics and structural dynamics. Utilizing linear piezoelectric theory results in an intrinsically coupled pair of piezoelectric constitutive equations. One equation describes the direct piezoelectric effect where strains produce an electric field and the other describes the converse effect where an applied electrical field produces strain. The purpose of this study is to compare finite element analysis and experiments of a thin plate with bonded piezoelectric material. Since an isotropic plate in combination with a thin piezoelectric layer constitutes a special case of a laminated composite, the classical laminated plate theory is used in the formulation to accommodated generic laminated composite panels with multiple bonded and embedded piezoelectric layers. Additionally, the von Karman large deflection plate theory is incorporated. The formulation results in laminate constitutive equations that are amiable to the inclusion of the piezoelectric constitutive equations yielding in a fully electro-mechanically coupled composite laminate. Using the finite element formulation, the governing differential equations of motion of a composite laminate with embedded piezoelectric layers are derived. The finite element model not only considers structural degrees of freedom (d.o.f.) but an additional electrical d.o.f. for each piezoelectric layer. Comparison between experiment and numerical prediction is performed by first treating the piezoelectric as a sensor and then again treating it as an actuator. To assess the piezoelectric layer as a sensor, various uniformly distributed pressure loads were simulated in the analysis and the corresponding generated voltages were calculated using both linear and nonlinear finite element analyses. Experiments were carried out by applying the same uniformly distributed loads and measuring the resulting generated voltages and corresponding maximum plate deflections. It is found that a highly nonlinear relationship exists between maximum deflection and voltage versus pressure loading. In order to assess comparisons of predicted and measured piezoelectric actuation, sinusoidal excitation voltages are simulated/applied and maximum deflections are calculated/measured. The maximum deflection as a function of time was determined using the linear finite elements analysis. Good correlation between prediction and measurement was achieved in all cases.

Bevan, Jeffrey S.↗
NASA NTRS2003

Modeling Candle Flame Behavior In Variable Gravity

The burning of a candle, as typical non-propagating diffusion flame, has been used by a number of researchers to study the effects of electric fields on flame, spontaneous flame oscillation and flickering phenomena, and flame extinction. In normal gravity, the heat released from combustion creates buoyant convection that draws oxygen into the flame. The strength of the buoyant flow depends on the gravitational level and it is expected that the flame shape, size and candle burning rate will vary with gravity. Experimentally, there exist studies of candle burning in enhanced gravity (i.e. higher than normal earth gravity, g(sub e)), and in microgravity in drop towers and space-based facilities. There are, however, no reported experimental data on candle burning in partial gravity (g < g(sub e)). In a previous numerical model of the candle flame, buoyant forces were neglected. The treatment of momentum equation was simplified using a potential flow approximation. Although the predicted flame characteristics agreed well with the experimental results, the model cannot be extended to cases with buoyant flows. In addition, because of the use of potential flow, no-slip boundary condition is not satisfied on the wick surface. So there is some uncertainty on the accuracy of the predicted flow field. In the present modeling effort, the full Navier-Stokes momentum equations with body force term is included. This enables us to study the effect of gravity on candle flames (with zero gravity as the limiting case). In addition, we consider radiation effects in more detail by solving the radiation transfer equation. In the previous study, flame radiation is treated as a simple loss term in the energy equation. Emphasis of the present model is on the gas-phase processes. Therefore, the detailed heat and mass transfer phenomena inside the porous wick are not treated. Instead, it is assumed that a thin layer of liquid fuel coated the entire wick surface during the burning process. This is the limiting case that the mass transfer process in the wick is much faster than the evaporation process at the wick surface.

Alsairafi, A.↗
DOE OSTI2025

Probing topological phases in a perturbed Kane-Mele model via RKKY interaction: Application to monolayer jacutingaite Pt 2 ⁢HgSe 3

Quantum spin Hall insulators (QSHIs) leverage strong spin-orbit coupling (SOC) for efficient spin manipulation, making them promising for spintronics. Here, in this study, we investigate the noncollinear Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction between two magnetic impurities in a perturbed Kane-Mele model with strong SOC, relevant to monolayer jacutingaite Pt 2 ⁢HgSe 3 as a prominent QSHI. Following the previous studies that mainly focused on the model and its general applications, we provide a systematic examination of the effects of various perturbations and strong spin-orbit hybridizations, which drive phase transitions that have not been extensively explored before. By incorporating these perturbations into the model and accurately accounting for spin-orbit hybridizations through spin-space Green's functions and the RKKY interactions, we uncover distinct, relative (rather than absolute) signatures of different phase transitions. These phase transitions are induced by both static and dynamic perturbations on the magnetic impurities. Notably, we identify additional phases emerging from the interplay with the magnetic substrate. All these influence the switching between ferromagnetic and antiferromagnetic, as well as clockwise and counterclockwise magnetic interactions. Our results provide a practical way to track topological phases through magnetic properties, offering new insights into phase control and spin manipulation in QSHIs.

Kane-Mele model↗
DOE OSTI2025

Anisotropic light-tailored RKKY interaction in two-dimensional 𝑑-wave altermagnets

Altermagnets are known in spintronics for their intrinsic spin-splitting and unconventional magnetic responses, particularly to magnetic impurities. However, effectively controlling the magnetic exchange interactions in altermagnets is challenging for practical applications. Here, in this work, we propose using circularly polarized light to tune the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction in two-dimensional 𝑑-wave altermagnets. Using the real-space retarded Green's functions approach, our results show that while the Heisenberg and Ising exchanges dominate, a notable Dzyaloshinskii–Moriya (DM) interaction also plays a key role. Furthermore, the inherent strength of altermagnetism imprints chirp-like signatures into the magnetic responses, which can be dynamically tuned via light. We mainly demonstrate that gate-induced Rashba spin-orbit coupling is essential in response to light—light selectively and anisotropically adjusts the DM interaction without affecting the other exchanges. Our findings further indicate that rotating the altermagnet by 45° relative to the light's polarization direction generates a Dirac-like dispersion and different DM interactions. We finally extract critical thresholds where light reverses DM interactions along one axis or balances both in-plane components. The anisotropic light-driven control of RKKY interactions in altermagnets not only highlights their unique properties but also opens new avenues for engineering tailored magnetic characteristics in spintronic applications.

altermagnetism↗
NASA NTRS2006

Miniature Ion-Array Spectrometer

A figure is shown that depicts a proposed miniature ion-mobility spectrometer that would share many features of design and operation of the instrument described in another article. The main differences between that instrument and this one would lie in the configuration and mode of operation of the filter and detector electrodes. A filter electrode and detector electrodes would be located along the sides of a drift tube downstream from the accelerator electrode. These electrodes would apply a combination of (1) a transverse AC electric field that would effect differential transverse dispersal of ions and (2) a transverse DC electric field that would drive the dispersed ions toward the detector electrodes at different distances along the drift tube. The electric current collected by each detector electrode would be a measure of the current, and thus of the abundance of the species of ions impinging on that electrode. The currents collected by all the detector electrodes could be measured simultaneously to obtain continuous readings of abundances of species. The downstream momentum of accelerated ions would be maintained through neutralization on the electrodes; the momentum of the resulting neutral atoms would serve to expel gases from spectrometer, without need for a pump.

Hartley, Frank T.↗
DOE OSTI2022

Ionic Modulation at the LaAlO 3 /KTaO 3 Interface for Extreme High-Mobility Two-Dimensional Electron Gas

Due to the coexistence of many emergent phenomena, including 2D superconductivity and a large Rashba spin-orbit coupling, 5d transition metal oxides-based two-dimensional electron systems (2DESs) have been prospected as one of the potential intrants for modern electronics. However, despite the lighter electron mass, the mobility of carriers, a key requisite for high-performance devices, in 5d-oxides devices remains far behind their 3d-oxides analogs. The carriers’ mobility in these oxides is significantly hampered by the inevitable presence of defects. Here, in this study, very high mobility (≈22 650 cm 2 V –1 s –1 ) of 5d-2DES confined at the LaAlO 3 /KTaO 3 interface is reported. The high mobility, which is beyond the values observed in SrTiO 3 2DESs in the same carrier-density range, is achieved using the ionic-liquid gating at room temperature. The authors postulate that the ionic-liquid gating affects the oxygen vacancies and efficiently reduces any disorder at the interface. Investigating density and mobility in a broad range of back-gate voltage, the authors reveal that the mobility follows the power-law µ ∝ n 1.2 , indicating the very high quality of ionic-liquid-gated LaAlO 3 /KTaO 3 devices, consistent with the postulate. Furthermore, the analysis of the quantum oscillations confirms that the high-mobility electrons occupy the electronic sub-bands emerging from the Ta:5d orbitals of KTaO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ferroelectric Switching of Pure Spin Polarization in Two-Dimensional Electron Gas

Two-dimensional electron gas (2DEG) created at compound interfaces can exhibit a broad range of exotic physical phenomena, including quantum Hall phase, emergent ferromagnetism, and superconductivity. Although electron spin plays key roles in these phenomena, the fundamental understanding and application prospects of such emergent interfacial states have been largely impeded by the lack of purely spin-polarized 2DEG. In this paper, by first-principles calculations of the multiferroic superlattice GeTe/MnTe, we find the ferroelectric polarization of GeTe is concurrent with the half-metallic 2DEG at interfaces. Remarkably, the pure spin polarization of the 2DEG can be created and annihilated by polarizing and depolarizing the ferroelectrics and can be switched (between pure spin-up and pure spin-down) by flipping the ferroelectric polarization. Given the electric-field amplification effect of ferroelectric electronics, we envision multiferroic superlattices could open up new opportunities for low-power, high-efficiency spintronic devices such as spin field-effect transistors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Diffusive excitonic bands from frustrated triangular sublattice in a singlet-ground-state system

Magnetic order in most materials occurs when magnetic ions with finite moments arrange in a particular pattern below the ordering temperature. Intriguingly, if the crystal electric field (CEF) effect results in a spin-singlet ground state, a magnetic order can still occur due to the exchange interactions between neighboring ions admixing the excited CEF levels. The magnetic excitations in such a state are spin excitons generally dispersionless in reciprocal space. Here we use neutron scattering to study stoichiometric Ni 2 Mo 3 O 8 , where Ni 2+ ions form a bipartite honeycomb lattice comprised of two triangular lattices, with ions subject to the tetrahedral and octahedral crystalline environment, respectively. We find that in both types of ions, the CEF excitations have nonmagnetic singlet ground states, yet the material has magnetic order. Furthermore, CEF spin excitons from the tetrahedral sites form a dispersive diffusive pattern around the Brillouin zone boundary, likely due to spin entanglement and geometric frustrations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bichromatic moiré superlattices for tunable quadrupolar trions and correlated states

Moiré superlattices in transition metal dichalcogenide heterostructures provide a platform to engineer many-body interactions. Here, we realize a bichromatic moiré superlattice in an asymmetric WSe2/WS2/WSe2 heterotrilayer by combining R- and H-stacked bilayers with mismatched moiré wavelengths. This structure hosts fermionic quadrupolar moiré trions—interlayer excitons bound to an opposite-layer hole—with vanishing dipole moments. These trions arise from hybridized moiré potentials enabling multiple excitonic orbitals with tunable interlayer coupling, allowing control of excitonic and electronic ground states. We show that an out-of-plane electric field could effectively reshape moiré excitons and interlayer-intralayer electron correlations, driving a transition from interlayer to intralayer Mott states with enhanced Coulomb repulsion. The asymmetric stacking further enriches excitonic selection rules, broadening opportunities for spin-photon engineering. Our results demonstrate bichromatic moiré superlattices as a reconfigurable platform for emergent quantum states, where quadrupolar moiré trion emission may enable coherent and entangled quantum light manipulation.

Chen, Mingfeng [Washington University in St. Louis↗