SEARCH · Engineering Papers

Results for “Electric Arc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1987

TWT efficiency improvement by a low-cost technique for deposition of carbon on MDC electrodes

A simple method of improving the TWT and multistage depressed collector (MDC) efficiency has been demonstrated. The efficiency improvement was produced by the application of a thin layer of carbon to the copper electrodes of the MDC by means of a rapid low-cost technique involving the pyrolysis of hydrocarbon oil in electric arc discharges. Experimental results with a representative TWT and MDC showed an 11 percent improvement in both the TWT and MDC efficiencies as compared to those of the same TWT and MDC with machined copper electrode surfaces. An extended test with a 550-W CW TWT indicated good durability of the carbon-coated electrode surfaces.

Ebihara, Ben T.↗

NASA NTRS1987

Aerothermodynamics research at NASA Ames

Research activity in the aerothermodynamics branch at NASA Ames Research Center is reviewed. Advanced concepts and mission studies relating to the next generation aerospace transportation systems are summarized and directions for continued research identified. Theoretical and computational studies directed at determining flow fields and radiative and convective heating loads in real gases are described. Included are Navier-Stokes codes for equilibrium and thermochemical nonequilibrium air. Experimental studies in the 3.5 foot hypersonic wind tunnel, the ballistic ranges and the electric arc driven shock tube are described. Tested configurations included generic hypersonic aerospace plane configurations, aeroassisted orbital transfer vehicle shapes and Galileo probe models.

Deiwert, George S.↗

NASA NTRS1989

Ultraclean Radiant Furnace

Relatively-inexpensive radiant furnace brings specimen in controlled atmosphere to temperature higher than previously attainable - nearly as high as maximum operating temperature of heating element. Heating element made of refractory material like tungsten, molybdenum, graphite, or silicon carbide, or consists of plasma or electric arcs. Furnace distributes heat fairly uniformly over surface of specimen.

Blair, David W.↗

NASA NTRS1988

Requirements and an approach for coating the Gravity Probe B gyroscope rotor

A process to coat a quartz gyroscope rotor uniformly with superconducting niobium as part of a NASA sponsored experiment to test general relativity is described. The requirements for uniformity, film adhesion, and superconducting properties of the niobium thin film rotor coating are discussed. A uniformity of 1.5 percent (peak to valley) (38 nm) with good adhesion, no pinholes larger than 0.25 mm, transition temperature of 9.8 K, and the ability to survive repeated thermal cycling to 4.2 K have been achieved. Problems concerning abrasive damage and electrical arc damage during earthbound testing have been observed. Many hours of ground-based gyro operation demonstrate the applicability of this approach to rotor coating.

Gill, D.↗

NASA NTRS1990

Nonequilibrium and equilibrium shock front radiation measurements

The intensities of the radiation emitted behind a normal shock wave in N were measured in an electric-arc driven shock tube at a shock velocity of 6.2 km/sec. Both a time-resolved broad-band radiation intensity measurement and a time-frozen spectral measurement were conducted. The rotational and vibrational temperatures are determined in both the equilibrium and the nonequilibrium regions. The results are compared with the similar data obtained by Allen et al. (1961). The measured rotational temperature seems to be in nonequilibrium, contradicting the two-temperature assumption of Park (1988), but the measured vibrational temperature agrees with Park's model.

Sharma, Surendra P.↗

NASA NTRS1989

Electrode erosion in low power arcjet thrusters

Low power arcjet thrusters (0.5 to 3 kW) are currently being considered for North-South station keeping of geosynchronous communication satellites. The erosion mechanisms of cathodes in these thrusters are not well understood. The experimental set-up to produce a steady state electric arc in a gas flow is described and some preliminary theoretical results on cathode erosion are presented.

Ghosh, A.↗

NASA NTRS1989

Promoted ignition of oxygen regulators

An investigation has been conducted of the ignition-containment capability of 12 oxygen regulators contaminated by various levels of hydrocarbon oils and subjected to promoted ignition. The regulators inlets were pressurized to 15.2 MPa with gaseous oxygen, and the oil was ignited by an electrical arc located upstream of the test article inlet port; the flame was allowed to propagate with the oxygen flow throughout the regulator internal cavities. The resulting reactions, which ranged in character from complete containment of the promoted ignition for one two-stage regulator to extensive burning and explosive energy release for several other (both single- and double-stage) regulators, indicate the need to prevent oil from being introduced into regulators.

Newton, Barry E.↗

NASA NTRS1991

Aerothermodynamic radiation studies

We have built and made operational a 6 in. electric arc driven shock tube which alloys us to study the non-equilibrium radiation and kinetics of low pressure (0.1 to 1 torr) gases processed by 6 to 12 km/s shock waves. The diagnostic system allows simultaneous monitoring of shock radiation temporal histories by a bank of up to six radiometers, and spectral histories with two optical multi-channel analyzers. A data set of eight shots was assembled, comprising shocks in N2 and air at pressures between 0.1 and 1 torr and velocities of 6 to 12 km/s. Spectrally resolved data was taken in both the non-equilibrium and equilibrium shock regions on all shots. The present data appear to be the first spectrally resolved shock radiation measurements in N2 performed at 12 km/s. The data base was partially analyzed with salient features identified.

Donohue, K.↗

NASA NTRS1992

High pressure hypervelocity electrothermal wind tunnel performance study and subscale tests

The feasibility of a Mach 10 to 20, high pressure electrothermal wind tunnel was assessed. A heater based on a continuous high power electric arc discharge capable of heating air to temperatures above 10,000 K and pressures of 15,000 atm is the key element of this wind tunnel. Results of analytical study indicate that the facility is capable of simulation conditions suitable for hypervelocity airbreathing propulsion testing up to Mach 16. In this case simulation was limited by pressure containment, high nozzle throat heat flux rates, and chemical freezing in the nozzle. The high total pressure capability improved the recombination chemistry in the facility nozzle as chemical equilibrium prevailed to the freezing point. Steady arc discharges were observed with liquid nitrogen flowing into the arc chamber during tests based on the two millisecond test facility. The measured steady pressure in the arc chamber was 4559 psi, which is two times greater than maximum total pressure obtainable in conventional arc heaters.

Rizkalla, Oussama F.↗

NASA NTRS1992

Nonequilibrium vibrational population measurements in an expanding flow using spontaneous Raman scattering

Vibrational relaxation of nitrogen in a 2D nozzle flow is studied using spontaneous Raman scattering. An electric arc driven shock tube operating as a reflected shock tunnel produces stagnation conditions of 5600 K and 100 atm. A 248 nm KrF laser pulse is focused into the nozzle to produce spatially resolved spontaneous Raman spectra. Vibrational population distributions are derived from the spectra for the states v = 0 to v = 8. The experimental results are compared with two theoretical models: the Landau-Teller relaxation model and a numerical solution of the master equations using transition rates derived from SSH theory. The Landau-Teller correction factor has been measured at 1.0 - 1.5.

Sharma, Surendra P.↗

NASA NTRS1992

Numerical modeling of fluid and electromagnetic phenomena in an arcjet

An explicit numerical technique is used to solve the axisymmetric reduced electromagnetic field equation. The effect of an electrical arc on a viscous, axisymmetric flow is approximated using an implicit thin layer Navier-Stokes solver with additional electromagnetic source terms in conjunction with the explicit finite difference code.

Flowe, Anita C.↗

NASA NTRS1993

Time-dependent simulation of reflected-shock/boundary layer interaction

An initial numerical/experimental investigation has been done to better understand multi-dimensional flow phenomena inside pulse facilities. Time-dependent quasi-one-dimensional and axisymmetric numerical simulations of complete shock tube flow are compared with experimental pressure traces recorded at the NASA Ames electric-arc driven shock tube facility (from cold driver shots). Of particular interest is the interaction between the reflected shock wave and the boundary layer. Evidence of the shock bifurcation caused by this interaction is clearly seen in the present experimental data. The axisymmetric simulations reproduce this phenomenon and demonstrate how this interaction can provide a mechanism for driver gas to contaminate the stagnation region. The simulations incorporate finite-rate chemistry, a moving mesh and laminar viscosity.

Wilson, Gregory J.↗

NASA NTRS1992

Vibrational and rotational temperature measurements in a shock tube

Vibrational and rotational temperatures in nitrogen test gas relaxing behind a normal shock are measured using the emission spectra of N2(+)(1-) and N2(2+) band systems in an electric-arc driven shock tube, at a shock velocity of 6.2 km/sec. The results are compared with similar data obtained by AVCO-Everett Research Laboratory during the 1960s. The vibrational and rotational temperatures in the equilibrium region obtained in the present experiment agreed with those of AVCO, but those in the nonequilibrium region are greatly different from the AVCO results. The measured rotational temperature seems to be in nonequilibrium with the translational temperature, contradicting the two-temperature model widely used in CFD. Also, the relaxation rates for both N2(+) and N2 molecules seem to be of the same order.

Sharma, S. P.↗

NASA NTRS1992

Research activity at the shock tube facility at NASA Ames

The general design and operating conditions of NASA Ames's electric arc drive shock tube facility are described, and the measurements conducted at the facility to support the development of a theoretical model of the effects of chemical nonequilibrium over a hypersonic vehicle are summarized. In particular, attention is given to the results of measurements at a shock velocity of 6.20 km/s in 1 Torr nitrogen and measurements at a shock velocity of 10.2 km/s in 0.1 Torr air. The discussion covers reaction rate measurement, the use of holographic interferometry, and measurements of vibrational populations using Raman scattering.

Sharma, Surendra P.↗

NASA NTRS1992

Research activity at the shock tube facility at NASA Ames

The real gas phenomena dominate the relaxation process occurring in the flow around hypersonic vehicles. The air flow around these vehicles undergoes vibrational excitation, chemical dissociation, and ionization. These chemical and kinetic phenomena absorb energy, change compressibility, cause temperature to fall, and density to rise. In high-altitude, low density environments, the characteristic thicknesses of the shock layers can be smaller than the relaxation distances required for the gas to attain chemical and thermodynamic equilibrium. To determine the effects of chemical nonequilibrium over a realistic hypersonic vehicle, it would be desirable to conduct an experiment in which all aspects of fluid flow are simulated. Such an experiment is extremely difficult to setup. The only practical alternative is to develop a theoretical model of the phenomena and to compute the flow around the vehicle including the chemical nonequilibrium, and compare the results with the experiments conducted in the facilities under conditions where only a portion of the flow phenomena is simulated. Three types of experimental data are needed to assist the aerospace community in this model development process: (1) data which will enhance our phenomenological understanding of the relaxation process, (2) data on rate reactions for the relevant reactions, and (3) data on bulk properties, such as spectral radiation emitted by the gas, for a given set of aerodynamic conditions. NASA Ames is in a process of collecting such data by simulating the required aerothermochemical conditions in an electric arc driven shock tube.

Sharma, Surendra P.↗

NASA NTRS1995

Electrical discharge heating of chondrules in the solar nebula

We present a rudimentary theoretical assessment of electrical discharge heating as a candidate mechanism for the formation of chondrules in the solar nebula. The discharge model combines estimates of the properties of the nebula, a mechanism for terrestrial thunderstorm electrification, and some fundamental electrical properties of gases. Large uncertainties in the model inputs limit these calculations to order-or-magnitude accuracy. Despite the uncertainty, it is possible to estimate an upper limit to the efficiency of nebular discharges at melting millimeter-sized stony objects. We find that electrical arcs analogous to terrestrial lightning could have occurred in the nebula, but that under most conditions these discharges probably could not have melted chondrules. Despite our difficulties, we believe the topic worthy of further investigation and suggest some experiments which could improve our understanding of nebular discharges.

Love, Stanley G.↗

NASA NTRS1997

Enhancement of Nucleate Boiling Heat Flux on Macro/Micro-Structured Surfaces Cooled by Multiple Impinging Jets

An experimental investigation of nucleate boiling heat transfer from modified surfaces cooled by multiple in-line impinging circular jets is reported and found to agree with single jet results. A copper block is heated from the back by two electrical arcs, and cooled on the opposite side by three identical liquid jets of distilled water at subcoolings of 25 C 50 C and 77 C and Freon 113 at 24 C subcooling. Liquid flow rates are held constant at 5, 10, and 15 GPH for each of the three jets with jet velocities ranging from 1.4 m/s to 1 1.2 m/s and jet diameters from 0.95 mm to 2.2 mm. To increase the maximum heat flux (CHF) and heat removal rate, the boiling surface was modified by both macro and micro enhancements. Macro modification consists of machined radial grooves in the boiling surface arranged in an optimally designed pattern to allow better liquid distribution along the surface. These grooves also reduce splashing of liquid droplets, and provide 'channels' to sweep away bubbles. Micro modification was achieved by flame spraying metal powder on the boiling surface, creating a porous, sintered surface. With the addition of both micro and macro structured enhancements, maximum heat flux and nucleate boiling can be enhanced by more than 200%. Examination of each surface modification separately and together indicates that at lower superheats, the micro structure provides the enhanced heat transfer by providing more nucleation sites, while for higher superheats the macro structure allows better liquid distribution and bubble removal. A correlation is presented to account for liquid subcoolings and surface enhancements, in addition to the geometrical and fluid properties previously reported in the literature.

Kugler, Scott Lee↗

NASA NTRS2001

MIR Solar Array Return Experiment: Power Performance Measurements and Molecular Contamination Analysis Results

A solar array segment was recently removed from the Mir core module and returned for ground-based analysis. The segment, which is similar to the ones the Russians have provided for the FGB and Service Modules, was microscopically examined and disassembled by US and Russian science teams. Laboratory analyses have shown the segment to he heavily contaminated by an organic silicone coating, which was converted to an organic silicate film by reactions with atomic oxygen within the. orbital flight environment. The source of the contaminant was a silicone polymer used by the Russians as an adhesive and bonding agent during segment construction. During its life cycle, the array experienced a reduction in power performance from approx. 12%, when it was new and first deployed, to approx. 5%, when it was taken out of service. However, current-voltage measurements of three contaminated cells and three pristine, Russian standard cells have shown that very little degradation in solar array performance was due to the silicate contaminants on the solar cell surfaces. The primary sources of performance degradation is attributed to "thermal hot-spotting" or electrical arcing; orbital debris and micrometeoroid impacts; and possibly to the degradation of the solar cells and interconnects caused by radiation damage from high energy protons and electrons.

Visentine, James↗