Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EQUATIONS - STRESSES PLATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1962

One-Dimensional Heat Conduction Through the Skin of a Vehicle upon Entering a Planetary Atmosphere at Constant Velocity and Entry Angle

Closed-form solutions of the one-dimensional heat-conduction equations for the flow of heat into a plate with a laminar boundary layer have been obtained for a configuration entering a planetary atmosphere with constant velocity and negative entry angle. The atmospheric density was assumed to obey an exponential law and the temperature was assumed constant initially. The solution is in the form of a Fourier series expansion which, for most practical applications, can be approximated by retaining only one term of the expression. The solution applies to the initial part of the entry before the maximum heating conditions are encountered.

SKIN TEMPERATURE↗
NASA NTRS1977

Navier-Stokes solution for the laminar and turbulent supersonic flow near the trailing edge of a flat plate

The present paper deals with problems of two-dimensional laminar and turbulent flow of a viscous incompressible fluid near the trailing edge of a thin flat plate. The complete system of Navier-Stokes equations is solved by means of MacCormack's finite-difference scheme. In the laminar case, the results are compared with the triple deck solution of Daniels (1973). The comparisons indicate that the asymptotic triple deck theory for supersonic trailing-edge flow is accurate within five percent for Reynolds numbers greater than 1000. In the turbulent case, the Prandtl-Van Driest-Clausner algebraic eddy viscosity model is used, showing that the region of upstream influence is roughly of the order of the boundary layer thickness.

Hussaini, M. Y.↗
NASA NTRS1977

Analysis of voltage data

The use of statistical analysis (regression analysis) to determine the data correlation between eight voltage parameters is discussed. The eight parameters correlated include: temperature, depth of discharge; charge rate; discharge rate; percent recharge; concentration of KOH; amount of KOH; and precharge. Graphs are presented which show: (1) starpoint/centerpoint cycles to failure vs. parameters; (2) cycles to failure vs. temperature; and (3) positive and negative plate thickness and weight vs. cycles. An empirical equation derived from cycles to failure vs. temperature graph for cells cycled at 1C charge, 2C discharge, and 14 percent recharge is also presented.

Mcdermott, P. P.↗
NASA NTRS1983

Unsteady laminar boundary-layer calculations on oscillating configurations including backflow. Part 1: Flat plate, oscillating in its own plane

A finite difference method has been developed to calculate the unsteady boundary layer over an oscillating flat plate. Low- and high frequency approximations were used for comparison with numerical results. Special emphasis was placed on the behavior of the flow and on the numerical calculation procedure as soon as reversed flow has occurred over part of the oscillation cycle. The numerical method displayed neither problems nor singular behavior at the beginning of or within the reversed flow region. Calculations, however, came to a limit where the back-flow region reached the plate's leading edge in the case of high oscillation amplitudes. It is assumed that this limit is caused by the special behavior of the flow at the plate's leading edge where the boundary layer equations are not valid.

Geissler, W.↗
NASA NTRS1984

Calculations of separation bubbles using boundary-layer-type equations. I. II

Two-dimensional models of separated flows are presented with stream-function boundary equations. A patching procedure is employed to solve for unknowns in viscous-inviscid interactions simultaneously in order to derive strong coupling. The technique features simplified Navier-Stokes equations and is useful for flows around flat plates and more complex geometries such as airfoils and cascades. Sample calculations are provided for separated flows in diffusers and in the neighborhood of trailing edges. Massive bubbles and unclosed bubbles are noted to present difficulties for the models.

Halim, A.↗
NASA NTRS1985

A three-dimensional boundary-layer method for flow over delta wings with leading-edge separation

A three-dimensional, laminar boundary-layer method is applied to the incompressible flow over a slender delta wing at incidence. The predictor-corrector finite-difference scheme of Matsuno is used to difference the governing equations. The method has the advantages that no iterations are required to advance the solution and the cross-flow derivatives are formed independent of the cross-field direction. The difference scheme is demonstrated to yield accurate numerical results when compared to the exact solution of the three-dimensional boundary-layer equations for parabolic flow over a moving flat plate. The method is applied to delta wings of various sweep angles at angles of attack up to 20 deg., with the inviscid solution determined using a higher-order, three-dimensional panel method.

Woodson, S. H.↗
NASA NTRS1991

A near-wall two-equation model for compressible turbulent flows

A near-wall two-equation turbulence model of the K - epsilon type is developed for the description of high-speed compressible flows. The Favre-averaged equations of motion are solved in conjunction with modeled transport equations for the turbulent kinetic energy and solenoidal dissipation wherein a variable density extension of the asymptotically consistent near-wall model of So and co-workers is supplemented with new dilatational models. The resulting compressible two-equation model is tested in the supersonic flat plate boundary layer - with an adiabatic wall and with wall cooling - for Mach numbers as large as 10. Direct comparisons of the predictions of the new model with raw experimental data and with results from the K - omega model indicate that it performs well for a wide range of Mach numbers. The surprising finding is that the Morkovin hypothesis, where turbulent dilatational terms are neglected, works well at high Mach numbers, provided that the near wall model is asymptotically consistent. Instances where the model predictions deviate from the experiments appear to be attributable to the assumption of constant turbulent Prandtl number - a deficiency that will be addressed in a future paper.

Zhang, H. S.↗
NASA NTRS1992

A near-wall two-equation model for compressible turbulent flows

A near-wall two-equation turbulence model of the k-epsilon type is developed for the description of high-speed compressible flows. The Favre-averaged equations of motion are solved in conjunction with modeled transport equations for the turbulent kinetic energy and solenoidal dissipation wherein a variable density extension of the asymptotically consistent near-wall model of So and co-workers is supplemented with new dilatational models. The resulting compressible two-equation model is tested in the supersonic flat plate boundary layer - with an adiabatic wall and with wall cooling - for Mach numbers as large as 10. Direct comparisons of the predictions of the new model with raw experimental data and with results from the K-omega model indicate that it performs well for a wide range of Mach numbers. The surprising finding is that the Morkovin hypothesis, where turbulent dilatational terms are neglected, works well at high Mach numbers, provided that the near wall model is asymptotically consistent. Instances where the model predictions deviate from the experiments appear to be attributable to the assumption of constant turbulent Prandtl number - a deficiency that will be addressed in a future paper.

Zhang, H. S.↗
NASA NTRS1994

A Galerkin method for linear PDE systems in circular geometries with structural acoustic applications

A Galerkin method for systems of PDE's in circular geometries is presented with motivating problems being drawn from structural, acoustic, and structural acoustic applications. Depending upon the application under consideration, piecewise splines or Legendre polynomials are used when approximating the system dynamics with modifications included to incorporate the analytic solution decay near the coordinate singularity. This provides an efficient method which retains its accuracy throughout the circular domain without degradation at singularity. Because the problems under consideration are linear or weakly nonlinear with constant or piecewise constant coefficients, transform methods for the problems are not investigated. While the specific method is developed for the two dimensional wave equations on a circular domain and the equation of transverse motion for a thin circular plate, examples demonstrating the extension of the techniques to a fully coupled structural acoustic system are used to illustrate the flexibility of the method when approximating the dynamics of more complex systems.

Smith, Ralph C.↗
NASA NTRS1995

Quantum field between moving mirrors: A three dimensional example

The scalar quantum field uniformly moving plates in three dimensional space is studied. Field equations for Dirichlet boundary conditions are solved exactly. Comparison of the resulting wavefunctions with their instantaneous static counterpart is performed via Bogolubov coefficients. Unlike the one dimensional problem, 'particle' creation as well as squeezing may occur. The time dependent Casimir energy is also evaluated.

Hacyan, S.↗
NASA NTRS1995

Advanced Modeling of Micromirror Devices

The flexure-beam micromirror device (FBMD) is a phase only piston style spatial light modulator demonstrating properties which can be used for phase adaptive corrective optics. This paper presents a complete study of a square FBMD, from advanced model development through final device testing and model verification. The model relates the electrical and mechanical properties of the device by equating the electrostatic force of a parallel-plate capacitor with the counter-acting spring force of the device's support flexures. The capacitor solution is derived via the Schwartz-Christoffel transformation such that the final solution accounts for non-ideal electric fields. The complete model describes the behavior of any piston-style device, given its design geometry and material properties. It includes operational parameters such as drive frequency and temperature, as well as fringing effects, mirror surface deformations, and cross-talk from neighboring devices. The steps taken to develop this model can be applied to other micromirrors, such as the cantilever and torsion-beam designs, to produce an advanced model for any given device. The micromirror devices studied in this paper were commercially fabricated in a surface micromachining process. A microscope-based laser interferometer is used to test the device in which a beam reflected from the device modulates a fixed reference beam. The mirror displacement is determined from the relative phase which generates a continuous set of data for each selected position on the mirror surface. Plots of this data describe the localized deflection as a function of drive voltage.

Michalicek, M. Adrian↗
NASA NTRS1994

Finite Element Analysis of the Random Response Suppression of Composite Panels at Elevated Temperatures using Shape Memory Alloy Fibers

A feasibility study on the use of shape memory alloys (SMA) for suppression of the random response of composite panels due to acoustic loads at elevated temperatures is presented. The constitutive relations for a composite lamina with embedded SMA fibers are developed. The finite element governing equations and the solution procedures for a composite plate subjected to combined acoustic and thermal loads are presented. Solutions include: 1) Critical buckling temperature; 2) Flat panel random response; 3) Thermal postbuckling deflection; 4) Random response of a thermally buckled panel. The preliminary results demonstrate that the SMA fibers can completely eliminate the thermal postbuckling deflection and significantly reduce the random response at elevated temperatures.

Turner, Travis L.↗
NASA NTRS2005

Receptivity of Supersonic Boundary Layers to Acoustic Disturbances

Boundary layer receptivity to two-dimensional slow and fast acoustic waves is investigated by solving Navier-Stokes equations for Mach 4.5 flow over a flat plate with a finite-thickness leading edge. Higher order spatial and temporal schemes are employed to obtain the solution whereby the flat-plate leading edge region is resolved by providing a sufficiently refined grid. The results show that the instability waves are generated in the leading edge region and that the boundary-layer is much more receptive to slow acoustic waves (by almost a factor of 20) as compared to the fast waves. Hence, this leading-edge receptivity mechanism is expected to be more relevant in the transition process for high Mach number flows. The effect of acoustic wave incidence angle is also studied and it is found that the receptivity of the boundary layer on the windward side (with respect to the acoustic forcing) decreases by more than a factor of 4 when the incidence angle is increased from 0 to 45 deg. However, the receptivity coefficient for the leeward side is found to vary relatively weakly with the incidence angle. The effect of leading-edge thickness is also studied and bluntness is found to stabilize the boundary layer. The relative significance of fast acoustic waves is enhanced in the presence of bluntness.

Malik, Mujeeb R.↗
NASA NTRS2007

Acoustic Receptivity of Mach 4.5 Boundary Layer with Leading- Edge Bluntness

Boundary layer receptivity to two-dimensional slow and fast acoustic waves is investigated by solving Navier-Stokes equations for Mach 4.5 flow over a flat plate with a finite-thickness leading edge. Higher order spatial and temporal schemes are employed to obtain the solution whereby the flat-plate leading edge region is resolved by providing a sufficiently refined grid. The results show that the instability waves are generated in the leading edge region and that the boundary-layer is much more receptive to slow acoustic waves (by almost a factor of 20) as compared to the fast waves. Hence, this leading-edge receptivity mechanism is expected to be more relevant in the transition process for high Mach number flows where second mode instability is dominant. Computations are performed to investigate the effect of leading-edge thickness and it is found that bluntness tends to stabilize the boundary layer. Furthermore, the relative significance of fast acoustic waves is enhanced in the presence of bluntness. The effect of acoustic wave incidence angle is also studied and it is found that the receptivity of the boundary layer on the windward side (with respect to the acoustic forcing) decreases by more than a factor of 4 when the incidence angle is increased from 0 to 45 deg. However, the receptivity coefficient for the leeward side is found to vary relatively weakly with the incidence angle.

Malik, Mujeeb R.↗