Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Experimental Demonstration of Microwave Signal/Electric Thruster Plasma Interaction Effects

An experiment was designed and conducted in the Electric Propulsion Laboratory of NASA Lewis Research Center to assess the impact of ion thruster exhaust plasma plume on electromagnetic signal propagation. A microwave transmission experiment was set up inside the propulsion test bed using a pair of broadband horn antennas and a 30 cm 2.3 kW ion thruster. Frequency of signal propagation covered from 6.5 to 18 GHz range. The stainless steel test bed when enclosed can be depressurized to simulate a near vacuum environment. A pulsed CW system with gating hardware was utilized to eliminate multiple chamber reflections from the test signal. Microwave signal was transmitted and received between the two hours when the thruster was operating at a given power level in such a way that the signal propagation path crossed directly through the plume volume. Signal attenuation and phase shift due to the plume was measured for the entire frequency band. Results for this worst case configuration simulation indicate that the effects of the ion thruster plume on microwave signals is a negligible attenuation (within 0.15 dB) and a small phase shift (within 8 deg.). This paper describes the detailed experiment and presents some of the results.

Zaman, Afroz J.↗
NASA NTRS1998

Computational Modeling of Semiconductor Dynamics at Femtosecond Time Scales

The Interchange No. NCC2-5149 deals with the emerging technology of photonic (or optoelectronic) integrated circuits (PICs or OEICs). In PICs, optical and electronic components are grown together on the same chip. To build such devices and subsystems, one needs to model the entire chip. PICs are useful for building components for integrated optical transmitters, integrated optical receivers, optical data storage systems, optical interconnects, and optical computers. For example, the current commercial rate for optical data transmission is 2.5 gigabits per second, whereas the use of shorter pulses to improve optical transmission rates would yield an increase of 400 to 1000 times. The improved optical data transmitters would be used in telecommunications networks and computer local-area networks. Also, these components can be applied to activities in space, such as satellite to satellite communications, when the data transmissions are made at optical frequencies. The research project consisted of developing accurate computer modeling of electromagnetic wave propagation in semiconductors. Such modeling is necessary for the successful development of PICs. More specifically, these computer codes would enable the modeling of such devices, including their subsystems, such as semiconductor lasers and semiconductor amplifiers in which there is femtosecond pulse propagation. Presently, there are no computer codes that could provide this modeling. Current codes do not solve the full vector, nonlinear, Maxwell's equations, which are required for these short pulses and also current codes do not solve the semiconductor Bloch equations, which are required to accurately describe the material's interaction with femtosecond pulses. The research performed under NCC2-5149 solves the combined Maxwell's and Bloch's equations.

Agrawal, Govind P.↗
NASA NTRS1994

Optimizations on Designing High-Resolution Finite-Difference Schemes

We describe a general optimization procedure for both maximizing the resolution characteristics of existing finite differencing schemes as well as designing finite difference schemes that will meet the error tolerance requirements of numerical solutions. The procedure is based on an optimization process. This is a generalization of the compact scheme introduced by Lele in which the resolution is improved for single, one-dimensional spatial derivative, whereas in the present approach the complete scheme, after spatial and temporal discretizations, is optimized on a range of parameters of the scheme and the governing equations. The approach is to linearize and Fourier analyze the discretized equations to check the resolving power of the scheme for various wave number ranges in the solution and optimize the resolution to satisfy the requirements of the problem. This represents a constrained nonlinear optimization problem which can be solved to obtain the nodal weights of discretization. An objective function is defined in the parametric space of wave numbers, Courant number, Mach number and other quantities of interest. Typical criterion for defining the objective function include the maximization of the resolution of high wave numbers for acoustic and electromagnetic wave propagations and turbulence calculations. The procedure is being tested on off-design conditions of non-uniform mesh, non-periodic boundary conditions, and non-constant wave speeds for scalar and system of equations. This includes the solution of wave equations and Euler equations using a conventional scheme with and without optimization and the design of an optimum scheme for the specified error tolerance.

Liu, Yen↗
NASA NTRS1998

Polar Plasma Wave Observations in the Auroral Region and Polar Cap

Auroral kilometric radiation (AKR), sometimes associated with auroral myriametric radiation (AMR), has been observed by the plasma wave instrument on board Polar on almost every northern hemisphere pass. High spectral resolution plots of the AKR obtained by the wide-band receiver of the plasma wave instrument on board the spacecraft often show discrete, negative-slope striations each extending over a period of several seconds. A preliminary survey of over 4000 spectrograms (each for 48 seconds of data) indicates that the striations are seen in the northern hemisphere near apogee about 5% of the time. The frequency range is 40 kHz less than f less than 100 kHz, but a few observations of signatures have been made at higher frequency (f less than 225 khz. The frequency drift rates R, are similar ranging from -9.0 kHz/sec less than R less than -1.0 kHz/sec. No data is currently available for perigee (southern hemisphere) passes. The paucity of positive-slope features may be due to the location of the satellite at altitudes well above the AKR source region. Past studies have suggested these features are due to AKR wave growth stimulated by the propagation of electromagnetic ion cyclotron waves travelling up (-R) or down (+R) the field line, through the source region. High-resolution waveform data from both Polar and FAST show the presence of solitary waves in the auroral region which may also be a source of these striations. AMR is seen as diffuse emission associated with, but at lower frequency than the lower AKR. Direction finding of these emissions is not conclusive, but for one case, they have a source region distinct from the magnetic field line containing the AKR source, but possibly associated with the auroral cavity density gradient.

Menietti, J. D.↗
NASA NTRS2004

The Role of the Heavy Ions in the Wave Magnetospheric Phenomena

This talk will emphasize the role of the heavy ions in the number of wave-particle interaction magnetospheric processes. In particular, we will discuss some of the experimental and theoretical studies that have investigated the role of the heavy ions (mainly He(+) and O(+)) in generation and propagation of electromagnetic ion cyclotron waves and their contribution to the heating of magnetospheric electrons and ions. The more recent studies have also shown that the heavy ions can greatly contribute to a generation of lower hybrid waves, ring current precipitation phenomena, and the overall energy redistribution in the inner magnetosphere. Using newly developed 2.5-dimensional particle-in-cell simulations, we study the energization and nonlinear coupling of different plasma waves in the presence of the heavy ions. We have shown that the high frequency wave modes critically depend on the heavy ion density and irrespective of the driven wave modes, both the light and heavy ions undergo significant transverse acceleration. But for the large heavy-ion densities, even the electrons are significantly accelerated in the parallel direction by the waves below the LH frequency.

Khazanov, G. V.↗
NASA NTRS2008

Use of Sonification for Analysis and Detection of Plasma Bubbles at 21 MHz

This research explores sonification as a useful tool for space science data exploration. Our interest lies in basic scientific analysis of plasmas of the ionosphere, of interplanetary space and of the interstellar medium. These plasmas all contain irregularities. Propagation of electromagnetic waves, like optical or radio waves, through a medium with random fluctuations in refractive index results in amplitude and phase fluctuations (Scheuer 1968). These variations may be displayed via sonification, using changes in sounds to represent the data variations. This is particularly useful extending science to the visually-impaired. The xSonify Java-based tool was developed to explore sonification techniques and its value for general science analysis and also assistive technology.

Wanda, Diaz↗
NASA NTRS2009

Low-Noise MMIC Amplifiers for 120 to 180 GHz

Three-stage monolithic millimeter-wave integrated-circuit (MMIC) amplifiers capable of providing useful amounts of gain over the frequency range from 120 to 180 GHz have been developed as prototype low-noise amplifiers (LNAs) to be incorporated into instruments for sensing cosmic microwave background radiation. There are also potential uses for such LNAs in electronic test equipment, passive millimeter- wave imaging systems, radar receivers, communication receivers, and systems for detecting hidden weapons. The main advantage afforded by these MMIC LNAs, relative to prior MMIC LNAs, is that their coverage of the 120-to-180-GHz frequency band makes them suitable for reuse in a wider variety of applications without need to redesign them. Each of these MMIC amplifiers includes InP transistors and coplanar waveguide circuitry on a 50- mthick chip (see Figure 1). Coplanar waveguide transmission lines are used for both applying DC bias and matching of input and output impedances of each transistor stage. Via holes are incorporated between top and bottom ground planes to suppress propagation of electromagnetic modes in the substrate. On the basis of computational simulations, each of these amplifiers was expected to operate with a small-signal gain of 14 dB and a noise figure of 4.3 dB. At the time of writing this article, measurements of noise figures had not been reported, but on-chip measurements had shown gains approaching their simulated values (see Figure 2).

Pukala, David↗
NASA NTRS2007

High-Power, High-Efficiency Ka-Band Space Traveling-Wave Tube

The L-3 Communications Model 999H traveling-wave tube (TWT) has been demonstrated to generate an output power of 144 W at 60-percent overall efficiency in continuous-wave operation over the frequency band from 31.8 to 32.3 GHz. The best TWT heretofore commercially available for operation in the affected frequency band is characterized by an output power of only 35 W and an efficiency of 50 percent. Moreover, whereas prior TWTs are limited to single output power levels, it has been shown that the output power of the Model 999H can be varied from 54 to 144 W. A TWT is a vacuum electronic device used to amplify microwave signals. TWTs are typically used in free-space communication systems because they are capable of operating at power and efficiency levels significantly higher than those of solid-state devices. In a TWT, an electron beam is generated by an electron gun consisting of a cathode, focusing electrodes, and an anode. The electrons pass through a hole in the anode and are focused into a cylindrical beam by a stack of periodic permanent magnets and travel along the axis of an electrically conductive helix, along which propagates an electromagnetic wave that has been launched by an input signal that is to be amplified. The beam travels within the helix at a velocity close to the phase velocity of the electromagnetic wave. The electromagnetic field decelerates some of the electrons and accelerates others, causing the beam to become formed into electron bunches, which further interact with the electromagnetic wave in such a manner as to surrender kinetic energy to the wave, thereby amplifying the wave. The net result is to amplify the input signal by a factor of about 100,000. After the electrons have passed along the helix, they impinge on electrodes in a collector. The collector decelerates the electrons in such a manner as to recover most of the remaining kinetic energy and thereby significantly increase the power efficiency of the TWT.

Krawczyk, Richard↗
NASA NTRS2006

Graded-Index "Whispering-Gallery" Optical Microresonators

Graded-index-of-refraction dielectric optical microresonators have been proposed as a superior alternative to prior dielectric optical microresonators, which include microspheres and microtori wherein electromagnetic waves propagate along circumferential paths in "whispering-gallery" modes. The design and method of fabrication of the proposed microresonators would afford improved performance by exploiting a combination of the propagation characteristics of the whisperinggallery modes and the effect of a graded index of refraction on the modes.

Savchenkov, Anatoliy↗
NASA NTRS2006

Manufacture of Sparse-Spectrum Optical Microresonators

An alternative design for dielectric optical microresonators and a relatively simple process to fabricate them have been proposed. The proposed microresonators would exploit the same basic physical phenomena as those of microtorus optical resonators and of the microsphere optical resonators described elsewhere. The resonances in such devices are associated with the propagation of electromagnetic waves along circumferential paths in "whispering-gallery" modes. The main advantage afforded by the proposal is that the design and the fabrication process are expected to be amenable to production of multiple microresonators having reproducible spectral parameters -- including, most notably, high values of the resonance quality factor (Q) and reproducible resonance frequencies.

Savchenkov, Anatoliy↗
NASA NTRS2006

Protein Sensors Based on Optical Ring Resonators

Prototype transducers based on integrated optical ring resonators have been demonstrated to be useful for detecting the protein avidin in extremely dilute solutions. In an experiment, one of the transducers proved to be capable of indicating the presence of avidin at a concentration of as little as 300 pM in a buffer solution a detection sensitivity comparable to that achievable by previously reported protein-detection techniques. These transducers are serving as models for the further development of integrated-optics sensors for detecting small quantities of other proteins and protein-like substances. The basic principle of these transducers was described in Chemical Sensors Based on Optical Ring Resonators (NPO-40601), NASA Tech Briefs, Vol. 29, No. 10 (October 2005), page 32. The differences between the present transducers and the ones described in the cited prior article lie in details of implementation of the basic principle. As before, the resonator in a transducer of the present type is a closed-circuit dielectric optical waveguide. The outermost layer of this waveguide, analogous to the optical cladding layer on an optical fiber, consists of a layer comprising sublayers having indices of refraction lower than that of the waveguide core. The outermost sublayer absorbs the chemical of interest (in this case, avidin). The index of refraction of the outermost sublayer changes with the concentration of absorbed avidin. The resonator is designed to operate with relatively strong evanescent-wave coupling between the outer sublayer and the electromagnetic field propagating along the waveguide core. By virtue of this coupling, the chemically induced change in the index of refraction of the outermost sublayer causes a measurable change in the spectrum of the resonator output.

Lin, Ying↗
NASA NTRS2012

An Overview of Scientific and Space Weather Results from the Communication/Navigation Outage Forecasting System (C/NOFS) Mission

The Communication/Navigation Outage Forecasting System (C/NOFS) Mission of the Air Force Research Laboratory is described. C/NOFS science objectives may be organized into three categories: (1) to understand physical processes active in the background ionosphere and thermosphere in which plasma instabilities grow; (2) to identify mechanisms that trigger or quench the plasma irregularities responsible for signal degradation; and (3) to determine how the plasma irregularities affect the propagation of electromagnetic waves. The satellite was launched in April, 2008 into a low inclination (13 deg), elliptical (400 x 850 km) orbit. The satellite sensors measure the following parameters in situ: ambient and fluctuating electron densities, AC and DC electric and magnetic fields, ion drifts and large scale ion composition, ion and electron temperatures, and neutral winds. C/NOFS is also equipped with a GPS occultation receiver and a radio beacon. In addition to the satellite sensors, complementary ground-based measurements, theory, and advanced modeling techniques are also important parts of the mission. We report scientific and space weather highlights of the mission after nearly four years in orbit

Pfaff, R.↗
NASA NTRS2018

A Rain Taxonomy for Degraded Visual Environment Mitigation

This Technical Memorandum (TM) provides a description of a rainfall taxonomy that defines the detailed characteristics of naturally occurring rainfall. The taxonomy is based on raindrop size measurements collected around the globe and encompasses several different climate types. Included in this TM is a description of these rainfall observations, an explanation of methods used to process those data, and resultant metrics comprising the rain taxonomy database. Each of the categories in the rain taxonomy are characterized by a unique set of raindrop sizes that can be used in simulations of electromagnetic wave propagation through a rain medium.

meteorology↗
NASA NTRS2019

Co- and Counter-Propagating Wave Effects in an Absorbing Medium

In this semi-tutorial paper, we revisit the interference phenomena caused by pairs of copropagating or counter-propagating transverse electromagnetic waves by letting the host medium be absorbing. We first consider plane waves in an unbounded medium, summarize the standingwave solution of the Maxwell equations, and discuss specific effects caused by nonvanishing absorption. We then consider the superposition of plane and spherical waves in the context of fartfield electromagnetic scattering by a particle. To this end we modify the classical Jones lemma by allowing nonzero absorption in the host medium and consider its most obvious consequences such as forward- and backscattering interference. The physical similarity of the two scenarios (superpositions of plane waves and superpositions of plane and spherical waves) is discussed.

Interference↗
NASA NTRS2011

Cup waveguide antenna with integrated polarizer and OMT

A cup waveguide antenna with integrated polarizer and OMT for simultaneously communicating left and right hand circularly polarized electromagnetic waves is adjustable to obtain efficient propagation and reception of electromagnetic waves. The antenna includes a circular waveguide having an orthomode transducer utilizing first and second pins longitudinally spaced apart and oriented orthogonally with respect to each other. Six radially-oriented adjustable polarizer screws extend from the exterior to the interior of the waveguide. A septum intermediate the first and second pins is aligned with the first pin. Adjustment of the polarizer screws enables maximized propagation of and/or response to left hand circularly polarized electromagnetic waves by the first pin while simultaneously enabling maximized propagation of and/or response to right hand circularly polarized electromagnetic waves by the second pin.

Acosta, Roberto J.↗
NASA NTRS1966

Radio waves and circuits

Diffraction and scattering of electromagnetic waves, radio wave propagation in ionized media, radio antennas, and signal processing in communications systems

CIRCUIT↗
NASA NTRS1974

Self-precession and frequency shift for electromagnetic waves in homogeneous plasmas

The nonlinear propagation of an arbitrarily polarized electromagnetic wave in a uniform plasma is studied. It is shown that nonlinear effects cause precession of the polarization ellipse as the wave propagates. The ellipticity remains constant, but the orientation of the principal axes is rotated relative to its initial value. A relativistic Vlasov model is used to study nonlinear frequency shifts as well as self-precession, in a plasma of arbitrary temperature. Even when the electron temperature is much greater than the product of the electron mass times the square of the velocity of light, the qualitative nature of these two processes remains unchanged, although their dependence on the plasma density is altered in significant ways. Implications of these effects for plasma instabilities driven by strong electromagnetic waves are briefly discussed.

Arons, J.↗