Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Implicit and Explicit Spacecraft Gyro Calibration

This paper presents a comparison between two approaches to sensor calibration. According to one approach, called explicit, an estimator compares the sensor readings to reference readings, and uses the difference between the two to estimate the calibration parameters. According to the other approach, called implicit, the sensor error is integrated to form a different entity, which is then compared with a reference quantity of this entity, and the calibration parameters are inferred from the difference. In particular this paper presents the comparison between these approaches when applied to in-flight spacecraft gyro calibration. Reference spacecraft rate is needed for gyro calibration when using the explicit approach; however, such reference rates are not readily available for in-flight calibration. Therefore the calibration parameter-estimator is expanded to include the estimation of that reference rate, which is based on attitude measurements in the form of attitude-quaternion. A comparison between the two approaches is made using simulated data. It is concluded that the performances of the two approaches are basically comparable. Sensitivity tests indicate that the explicit filter results are essentially insensitive to variations in given spacecraft dynamics model parameters.

Bar-Itzhack, Itzhack Y.↗
NASA NTRS1972

Feedline dynamic effects on shuttle POGO stability

The transmission parameters for the dynamic characteristics of a feedline were approximated using both power and product series expansions. The feedline transfer functions of a shuttle orbiter feedline configuration were obtained using power and product series approximations of 60th, 120th, 180th, and 240th, order. Bode plots using the above polynomial approximations were obtained and the results compared with the exact solution. The exact solution to the feedline transfer function was obtained by using the transcendental terms appearing in the transmission parameters. The results show that the shuttle orbiter feedline may be modeled adequately by using polynomial approximations for the transcendental functions appearing in the transmission parameters. The power series approach was shown to be preferable to the product series method.

Dimaggio, O. D.↗
NASA NTRS1986

Prediction of blade stresses due to gust loading

An analysis is developed for investigating the response of a rotor-fuselage system in a three-dimensional gust field wherein the gust velocity conponents can have arbitrary variation in space and time. Each rotor blade undergoes flap bending, lag bending and torsional deflections. The blades are divided into beam elements and each element consists of fifteen nodal degrees of freedom. Quasi-steady strip theory is used to obtain the aerodynamic loads. Unsteady aerodynamic effects are introduced through dynamic inflow modeling. Dynamic stall and reverse flow effects are also included. The fuselage is allowed five degrees of freedom: vertical, longitudinal, lateral, pitch and roll motions. The gust response equations are linearized about the vehicle trim state and the blade steady-state deflected position, and then solved by time integration. The blade bending moments, which determine blade stresses, are evaluated using the force summation technique. Systematic studies are made to identify the importance of several parameters including dynamic stall, forward speed, lag stiffness, gust profile, gust penetration rate and gust velocity direction.

Bir, Gunjit↗
NASA NTRS2006

Mystic: Implementation of the Static Dynamic Optimal Control Algorithm for High-Fidelity, Low-Thrust Trajectory Design

Mystic software is designed to compute, analyze, and visualize optimal high-fidelity, low-thrust trajectories, The software can be used to analyze inter-planetary, planetocentric, and combination trajectories, Mystic also provides utilities to assist in the operation and navigation of low-thrust spacecraft. Mystic will be used to design and navigate the NASA's Dawn Discovery mission to orbit the two largest asteroids, The underlying optimization algorithm used in the Mystic software is called Static/Dynamic Optimal Control (SDC). SDC is a nonlinear optimal control method designed to optimize both 'static variables' (parameters) and dynamic variables (functions of time) simultaneously. SDC is a general nonlinear optimal control algorithm based on Bellman's principal.

low thrust↗
NASA NTRS1988

Experimental studies in system identification of helicopter rotor dynamics

Recent experiments investigating the system identification of helicopter rotor dynamics are described. The identification makes use of a two-pass procedure that estimates the rotor dynamic states prior to estimation of the dynamic equation parameters. Estimation of the rotor states is made possible through use of the predictive information contained in blade-mounted accelerometers combined with a specialized processing scheme utilizing these signals. Descriptions of the experimental hardware and the system identification technique are given, as well as implementation issues for using the procedure on other similarly instrumented rotor blades. Finally, comparisons with other identification techniques using the same data are presented. It is demonstrated that the approach is an attractive one for measurement of a helicopter rotor's dynamic behavior.

Mckillip, Robert, Jr.↗
NASA NTRS1987

Application of design sensitivity analysis for greater improvement on machine structural dynamics

Methodologies are presented for greatly improving machine structural dynamics by using design sensitivity analyses and evaluative parameters. First, design sensitivity coefficients and evaluative parameters of structural dynamics are described. Next, the relations between the design sensitivity coefficients and the evaluative parameters are clarified. Then, design improvement procedures of structural dynamics are proposed for the following three cases: (1) addition of elastic structural members, (2) addition of mass elements, and (3) substantial charges of joint design variables. Cases (1) and (2) correspond to the changes of the initial framework or configuration, and (3) corresponds to the alteration of poor initial design variables. Finally, numerical examples are given for demonstrating the availability of the methods proposed.

Yoshimura, Masataka↗
NASA NTRS1990

Efficient detection and signal parameter estimation with application to high dynamic GPS receiver

In a system for deriving position, velocity, and acceleration information from a received signal emitted from an object to be tracked wherein the signal comprises a carrier signal phase modulated by unknown binary data and experiencing very high Doppler and Doppler rate, this invention provides combined estimation/detection apparatus for simultaneously detecting data bits and obtaining estimates of signal parameters such as carrier phase and frequency related to receiver dynamics in a sequential manner. There is a first stage for obtaining estimates of the signal parameters related to phase and frequency in the vicinity of possible data transitions on the basis of measurements obtained within a current data bit. A second stage uses the estimates from the first stage to decide whether or not a data transition has actually occurred. There is a third stage for removing data modulation from the received signal when a data transition has occurred and a fourth stage for using the received signal with data modulation removed therefrom to update global parameters which are dependent only upon receiver dynamics and independent of data modulation. Finally, there is a fifth stage for using the global parameters to determine the position, velocity, and acceleration of the object.

Kumar, Rajendra↗
NASA NTRS1973

On optimal modeling of systems.

A procedure for modeling a linear system by an optimal finite-dimensional approximation is developed on the basis of Sard's (1967) generalized spline. Error bounds are given, and the application of the procedure is illustrated by two presented examples. The procedure may be employed, not only in the modeling of conventional lumped-parameter and distributed-parameter continuous dynamical systems, but also in mathematical operations such as those involved in pattern recognition and picture enhancement problems.

De Figueiredo, R. J. P.↗
NASA NTRS1975

New control concept of anthropomorphic manipulators

The control of active articulated mechanisms involves the construction of trajectories and corresponding forces (torques). Two procedures for developing mathematical models of manipulator dynamics are explored. The control task can be formulated as follows: define the dynamic control parameters of the basic manipulator configuration with three degrees of freedom, which should perform movements at N points of the working space. The task can be solved by forming programmed coordinated motion which have to realize the adopted tip trajectory.

Vukobratovic, M.↗
NASA NTRS1977

Ku-band antenna acquisition and tracking performance study, volume 4

The results pertaining to the tradeoff analysis and performance of the Ku-band shuttle antenna pointing and signal acquisition system are presented. The square, hexagonal and spiral antenna trajectories were investigated assuming the TDRS postulated uncertainty region and a flexible statistical model for the location of the TDRS within the uncertainty volume. The scanning trajectories, shuttle/TDRS signal parameters and dynamics, and three signal acquisition algorithms were integrated into a hardware simulation. The hardware simulation is quite flexible in that it allows for the evaluation of signal acquisition performance for an arbitrary (programmable) antenna pattern, a large range of C/N sub O's, various TDRS/shuttle a priori uncertainty distributions, and three distinct signal search algorithms.

Huang, T. C.↗
NASA NTRS1985

Combat games

A mathematical formulation is proposed of a combat game between two opponents with offensive capabilities and offensive objective is proposed. Resolution of the combat involves solving two differential games with state constraints. Depending on the game dynamics and parameters, the combat can terminate in one of four ways: the first player wins; the second player wins; a draw (neither wins); or joint capture. In the first two cases, the optimal strategies of the two players are determined from suitable zero-sum games, whereas in the latter two the relevant games are nonzero-sum. Further, to avoid certain technical difficulties, the concept of a delta-combat game is introduced.

Ardema, M. D.↗
NASA NTRS1986

Optimal airframe synthesis for gust loads

An optimization capability for sizing airframe structures that are subjected to a combination of deterministic and random flight loads was established. The random vibration environment introduces the need for selecting a statistical process that best describes the random loads and permits computation of the dynamic response parameters of interest. Furthermore, it requires a formulation of design constraints that would minimize the conservativeness in the design and retain computational viability. The random loads are treated as a stationary, homogeneous process with a Gaussian probability distribution. The formulation of the analysis problem, the structure of the optimization programming system and a representative numerical example are discussed.

Hajela, P.↗
NASA NTRS1987

Fluid dynamics of unsteady separated flow. II - Lifting surfaces

An analytic method is described which uses static experimental data to predict the separated flow effect on rigid and elastic vehicle dynamics. Key parameters in the analytic relationship between steady and nonsteady aerodynamics are: the time lag occurring before a change of flow conditions can affect the separation-induced aerodynamic loads; the accelerated flow effect (i.e., the pressure gradient lag relative to the static aerodynamic characteristics); and the moving wall effect (i.e., the effect of the nonsteady boundary condition at the vehicle surface). Using the existing experimental data base, an analytic theory is formulated that can predict the separation-induced unsteady aerodynamics if the static characteristics are known from theory or experiment. Reference is made to increased-maneuverability advanced aircraft and to Space Shuttle Orbiter aerodynamics.

Ericsson, L. E.↗
NASA NTRS1988

Optimum structural sizing for gust induced response

The present paper describes an optimization capability for sizing airframe structures that are subjected to a combination of deterministic and random loads. Design constraints are implemented to prevent structural failure in fatigue and due to a single exceedance of the allowable stress. The random load is treated as a stationary, homogeneous process with a Gaussian probability distribution, and a frequency domain method is used for the computation of dynamic response parameters. An equal-probability-of-load-combination criterion is proposed in the formulation of strength constraints. This alleviates problems associated with the incomplete phase information available when using power spectral density methods. The optimization procedure is illustrated by examples using typical built-up structures.

Hajela, P.↗
NASA NTRS1989

Large-scale galaxy flow from a non-gravitational impulse

A theory is presented describing linear perturbations of an expanding universe containing multiple, independently perturbed, collisionless, gravitationally coupled constituents. Solutions are found in the limit where one initially unperturbed component dominates the total density. The theory is applied to perturbations generated by a nongravitational process in one or more of the light components, as would occur in explosive or radiation-pressure-instability theories of galaxy formation. The apparent dynamical density parameter and correlations between density and velocity amplitude for various populations, are evaluated as a function of cosmic scale factor.

Hogan, Craig J.↗
NASA NTRS1989

Modeling and control of flexible space platforms with articulated payloads

The first steps in developing a methodology for spacecraft control-structure interaction (CSI) optimization are identification and classification of anticipated missions, and the development of tractable mathematical models in each mission class. A mathematical model of a generic large flexible space platform (LFSP) with multiple independently pointed rigid payloads is considered. The objective is not to develop a general purpose numerical simulation, but rather to develop an analytically tractable mathematical model of such composite systems. The equations of motion for a single payload case are derived, and are linearized about zero steady-state. The resulting model is then extended to include multiple rigid payloads, yielding the desired analytical form. The mathematical models developed clearly show the internal inertial/elastic couplings, and are therefore suitable for analytical and numerical studies. A simple decentralized control law is proposed for fine pointing the payloads and LFSP attitude control, and simulation results are presented for an example problem. The decentralized controller is shown to be adequate for the example problem chosen, but does not, in general, guarantee stability. A centralized dissipative controller is then proposed, requiring a symmetric form of the composite system equations. Such a controller guarantees robust closed loop stability despite unmodeled elastic dynamics and parameter uncertainties.

Graves, Philip C.↗