Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Exceptional Points in Novel Multiscale Quantum-Nanoplasmonic Materials for Enhanced Sensing and Other Applications

Lossy quantum systems can display fascinating behaviors around singularities known as exceptional points in their complex eigenvalue spaces. Interest in these systems was ignited over two decades ago when Carl Bender and Stefan Boettcher—a LANL Director’s Postdoctoral Fellow at the time—pointed out that many features of conventional lossless quantum systems, such as real operator eigenvalues, could be recovered in lossy systems exhibiting parity- and time-reversal (ΡΤ) symmetry.

36 MATERIALS SCIENCE↗

Durability Optimization of CO 2 Electrolyzers for Syngas Evolution

Recently, there has been an increased interest in mitigating anthropogenic CO 2 emissions through the electrochemical conversion of CO 2 into fuels and fuel feedstocks, including hydrogen gas (H 2 ), carbon monoxide (CO), and mixtures of the two to yield syngas. Commercial applications of these systems require high catalytic selectivity for the desired products, while exhibiting operational lifetimes exceeding thousands of hours. Advancements in this field have produced systems that display high selectivity of the desired products at faradaic efficiencies exceeding 95%. Despite the advancements made in CO 2 electrolysis, system durability remains a standing challenge in the field. CO 2 electrolyzer lifetimes are often limited by carbonate fouling, catalyst degradation, detrimental flooding of electrode microporous layers and anion exchange membrane (AEM) failures. In this report, a 5 cm 2 membrane electrode assembly (MEA) device is used to investigate potential failure modes and to optimize AEM CO 2 electrolyzer operation. Key findings of this study include the importance of CO 2 flow rate, use of a thin PiperION PTFE-reinforced membrane, optimizing compression to enhance contact under 40 in-lb compression, and the effect of more compressible, commercial iridium oxide anodes on system durability.

Abouremeleh, Mohammed H. [Lawrence Berkeley Nation↗

Magnetic states of the quasi-one-dimensional iron chalcogenide Ba 2 FeS 3

Quasi-one-dimensional iron-based ladders and chains, with the 3d iron electronic density n=6, are attracting considerable attention. Recently, a new iron chain system Ba 2 FeS 3 , also with n=6, was prepared under high-pressure and high-temperature conditions. Here the magnetic and electronic phase diagrams are theoretically studied for this quasi-one-dimensional compound. Based on first-principles calculations, a strongly anisotropic one-dimensional electronic band behavior near the Fermi level was observed. In addition, a three-orbital electronic Hubbard model for this chain was constructed. Introducing the Hubbard and Hund couplings and studying the model via the density matrix renormalization group (DMRG) method, we studied the ground-state phase diagram. A robust staggered ↑-↓-↑-↓ AFM region was unveiled in the chain direction, consistent with our density functional theory (DFT) calculations. Furthermore, at intermediate Hubbard U coupling strengths, this system was found to display an orbital selective Mott phase (OSMP) with one localized orbital and two itinerant metallic orbitals. At very large U/W (W=bandwidth), the system displays Mott insulator characteristics, with two orbitals half-filled and one doubly occupied. Our results for high pressure Ba 2 FeS 3 provide guidance to experimentalists and theorists working on this one-dimensional iron chalcogenide chain material.

1-dimensional systems↗

SolCalc: A Suite for the Calculation and the Display of Magnetic Fields Generated by Solenoid Systems

SolCalc is a software suite that computes and displays magnetic fields generated by a three dimensional (3D) solenoid system. Examples of such systems are the Mu2e magnet system and Helical Solenoids for muon cooling systems. SolCalc was originally coded in Matlab, and later upgraded to a compiled version (called MEX) to improve solving speed. Matlab was chosen because its graphical capabilities represent an attractive feature over other computer languages. Solenoid geometries can be created using any text editor or spread sheets and can be displayed dynamically in 3D. Fields are computed from any given list of coordinates. The field distribution on the surfaces of the coils can be displayed as well. SolCalc was benchmarked against a well-known commercial software for speed and accuracy and the results compared favorably.

43 PARTICLE ACCELERATORS↗

Design and control of patterns in reaction-diffusion systems

We discuss the design of reaction-diffusion systems that display a variety of spatiotemporal patterns. We also consider how these patterns may be controlled by external perturbation, typically using photochemistry or temperature. Systems treated include the Belousov-Zhabotinsky (BZ) reaction, the chlorite-iodide-malonic acid and chlorine dioxide-malonic acid-iodine reactions, and the BZ-AOT system, i.e., the BZ reaction in a water-in-oil reverse microemulsion stabilized by the surfactant sodium bis(2-ethylhexyl) sulfosuccinate (AOT)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum chaos, integrability, and late times in the Krylov basis

Quantum chaotic systems are conjectured to display a spectrum whose fine-grained features (gaps and correlations) are well described by random matrix theory (RMT). We propose and develop a complementary version of this conjecture: quantum chaotic systems display a Lanczos spectrum whose local means and covariances are well described by RMT. To support this proposal, we first demonstrate its validity in examples of chaotic and integrable systems. We then show that for Haar-random initial states in RMTs the mean and covariance of the Lanczos spectrum suffice to produce the full long-time behavior of general survival probabilities including the spectral form factor, as well as the spread complexity. In addition, for initial states with continuous overlap with energy eigenstates, we analytically find the long-time averages of the probabilities of Krylov basis elements in terms of the mean Lanczos spectrum. This analysis suggests a notion of eigenstate complexity, the statistics of which differentiate integrable systems and classes of quantum chaos. Lastly, we clarify the relation between spread complexity and the universality classes of RMT by exploring various values of the Dyson index and Poisson distributed spectra.

Combinatorics↗

WE-E-12A-01: Medical Physics 1.0 to 2.0: MRI, Displays, Informatics

Medical Physics 2.0 is a bold vision for an existential transition of clinical imaging physics in face of the new realities of value-based and evidence-based medicine, comparative effectiveness, and meaningful use. It speaks to how clinical imaging physics can expand beyond traditional insular models of inspection and acceptance testing, oriented toward compliance, towards team-based models of operational engagement, prospective definition and assurance of effective use, and retrospective evaluation of clinical performance. Organized into four sessions of the AAPM, this particular session focuses on three specific modalities as outlined below. MRI 2.0: This presentation will look into the future of clinical MR imaging and what the clinical medical physicist will need to be doing as the technology of MR imaging evolves. Many of the measurement techniques used today will need to be expanded to address the advent of higher field imaging systems and dedicated imagers for specialty applications. Included will be the need to address quality assurance and testing metrics for multi-channel MR imagers and hybrid devices such as MR/PET systems. New pulse sequences and acquisition methods, increasing use of MR spectroscopy, and real-time guidance procedures will place the burden on the medical physicist to define and use new tools to properly evaluate these systems, but the clinical applications must be understood so that these tools are use correctly. Finally, new rules, clinical requirements, and regulations will mean that the medical physicist must actively work to keep her/his sites compliant and must work closely with physicians to ensure best performance of these systems. Informatics Display 1.0 to 2.0: Medical displays are an integral part of medical imaging operation. The DICOM and AAPM (TG18) efforts have led to clear definitions of performance requirements of monochrome medical displays that can be followed by medical physicists to ensure proper performance. However, effective implementation of that oversight has been challenging due to the number and extend of medical displays in use at a facility. The advent of color display and mobile displays has added additional challenges to the task of the medical physicist. This informatics display lecture first addresses the current display guidelines (the 1.0 paradigm) and further outlines the initiatives and prospects for color and mobile displays (the 2.0 paradigm). Informatics Management 1.0 to 2.0: Imaging informatics is part of every radiology practice today. Imaging informatics covers everything from the ordering of a study, through the data acquisition and processing, display and archiving, reporting of findings and the billing for the services performed. The standardization of the processes used to manage the information and methodologies to integrate these standards is being developed and advanced continuously. These developments are done in an open forum and imaging organizations and professionals all have a part in the process. In the Informatics Management presentation, the flow of information and the integration of the standards used in the processes will be reviewed. The role of radiologists and physicists in the process will be discussed. Current methods (the 1.0 paradigm) and evolving methods (the 2.0 paradigm) for validation of informatics systems function will also be discussed. Learning Objectives: Identify requirements for improving quality assurance and compliance tools for advanced and hybrid MRI systems. Identify the need for new quality assurance metrics and testing procedures for advanced systems. Identify new hardware systems and new procedures needed to evaluate MRI systems. Understand the components of current medical physics expectation for medical displays. Understand the role and prospect fo medical physics for color and mobile display devices. Understand different areas of imaging informatics and the methodology for developing informatics standards. Understand the current status of informatics standards and the role of physicists and radiologists in the process, and the current technology for validating the function of these systems.

07 ISOTOPE AND RADIATION SOURCES↗

Thermally stable porous catalyst systems and methods to produce the same

This disclosure provides compositions and methods directed to thermally stable catalyst systems, which display stable physical properties and/or stable catalytic properties after thermal pretreatment at a temperature in the range of about 600° C. to about 1000° C. The catalyst systems include metal particles which contain a stable metal and a catalytic metal deposited on a porous support. Embodiments of the disclosure include catalyst systems that can be used in high temperature applications such as the hybrid sulfur cycle. The hybrid sulfur cyclic is an elevated temperature and high acid reaction that may be conducted using concentrated sulfuric acid heated to 800° C. Embodiments of the disclosure can provide thermally stable catalysts and methods to produce thermally stable catalysts that remain active for at least 80 hours' exposure to these harsh conditions.

Monnier, John↗

Monte Carlo Study of the Mixed-Spin (1/2, 2) Ferrimagnetic Ising System on a Honeycomb Lattice

By means of the Monte Carlo method, we have simulated the mixed-spin-1/2 and spin-2 Ising ferrimagnetic system on a honeycomb lattice. We studied the variations of the magnetization as functions of the crystal field and the temperature and obtained the phase diagram of the system for various crystal field values. We have found that the system cannot display a point of compensation if we consider only nearest-neighbor interactions and the crystal field effect. Also, the tricritical point does not exist. To the best of our knowledge, this system has never been studied using the Monte Carlo method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interferences in photodetachment of a triatomic negative ion

The photodetachment of a triatomic negative ion is studied and the detached-electron wave function is obtained as a superposition of coherent waves originating from each atom of the system. The photodetached electron flux is evaluated on a screen placed at a large distance from the system, which displays strong interferences. A simple analytical formula is also obtained for the total photodetachment cross section. The formula approaches one time the cross sections for the one-center and two-center systems in the high photon energy limits. Also it approaches three times the cross section for one-center system in the low photon energy limits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Autocorrelations and thermal fragility of anyonic loops in topologically quantum ordered systems

Are systems that display topological quantum order (TQO), and have a gap to excitations, hardware fault-tolerant at finite temperatures? We show that in models that display low d-dimensional gaugelike symmetries, such as Kitaev's and its generalizations, the expectation value of topological symmetry operators vanishes at any nonzero temperature, a phenomenon that we coined thermal fragility. The autocorrelation time for the nonlocal topological quantities in these systems may remain finite even in the thermodynamic limit. We provide explicit expressions for the autocorrelation functions in Kitaev's toric code model. If temperatures far below the gap may be achieved then these autocorrelation times, albeit finite, can be made large. The physical engine behind the loss of correlations at large spatial and/or temporal distance is the proliferation of topological defects at any finite temperature as a result of a dimensional reduction. This raises an important question: How may we best quantify the degree of protection of quantum information in a topologically ordered system at finite temperature?.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-Dimensional Grid Visualization for Planning Activities: A Dubai Case Study

National Laboratory of the Rockies (NLR), in collaboration with the Dubai Electricity and Water Authority (DEWA) and Infra-X, has undertaken the Energy Visualization Analysis Project. The aim of this project is to enhance analytical and 3D visualization capabilities for distribution network planning and renewable energy integration. As modern grid continues to evolve with large-scale solar PV deployment and emerging distributed energy resources (DERs), the ability to effectively analyze, visualize, and communicate complex grid behaviors has become increasingly critical. The project focuses on developing empirical use cases based on real distribution feeder data and engineering workflows, ensuring the outcomes are directly aligned with operational environment. Through time-series power flow simulations and nodal hosting capacity analysis, the study quantifies the impacts of high PV penetration on voltage and thermal limits within representative 11 kV feeders. These analyses identify specific nodes and conditions where DER integration challenges arise. Furthermore, a Battery Energy Storage System (BESS) optimization algorithm was applied to determine the optimal size and placement of storage systems that can mitigate network constraints and enhance hosting capacity. The comparative results between base-case and BESS-augmented scenarios clearly demonstrate improvements in network stability and load management efficiency. In parallel, the NLR team developed an immersive 3D visualization framework, enabling interactive exploration of grid simulations using commodity head-mounted display (HMD) systems. This framework transforms conventional 2D simulation data into spatially intuitive visual environments - allowing engineers to analyze feeder conditions, PV hosting potential, and BESS effects in real time. This report represents the first foundational phase in establishing a visualization-driven analytical ecosystem. It provides a methodological foundation for data integration, visualization architecture, and simulation-based decision support, paving the way for large-scale adoption of immersive visualization across DEWA's Smart Grid Initiative, R&D activities, and future network resilience studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Tool for Performing Link Analysis, Operational Sequence Analysis, and Workload Analysis to Support Nuclear Power Plant Control Room Modernization

Nuclear power continues to have an imperative role for the U.S.’s electricity generation. However, for these nuclear power plants (NPPs) to remain economically viable, new strategies for reducing operations and maintenance costs must be explored. The U.S. Department of Energy Light Water Reactor Sustainability Program is researching how to digitally transform existing analog and hybrid main control rooms into a fully integrated control room that addresses this challenge. The transformation will fundamentally change the conduct of operations for these U.S. NPPs. Human factors engineering has a vital role in this effort, where traditional task analysis methods are important in informing the design of advanced human-system interface displays. This work describes a preliminary tool to support task analysis for the development of these advanced displays. Details on the use of this tool, including the specific task analysis methods offered, are presented in this paper.

99 GENERAL AND MISCELLANEOUS↗

Computer-based human-machine interfaces for emergency operation - 233

The Halden Reactor Project (HRP) has many years of experience in developing and evaluating principles for computer-based human-machine interfaces (HMIs). We have synthesized the lessons learned in an integrated design concept that is implemented on a boiling water reactor (BWR) simulator in the Halden Man Machine Laboratory (HAMMLAB). The design concept is intended to alert and support the operators in monitoring and controlling the plant during normal operation, emergency situations and outages. The computer-based HMIs include an alarm system, operating displays, operating procedures and large screen displays. The design concept has been tested in a simulator study in HAMMLAB. This paper describes the design and initial testing of the computer-based emergency operating procedures (EOPs) and other displays to support the operators when using the EOPs. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Computerized Operator Support System – Phase II Development

A computerized operator support system (COSS) prototype for nuclear control room process control is proposed and discussed. The COSS aids operators in addressing rapid plant upsets that would otherwise result in the shutdown of the power plant and interrupt electrical power generation, representing significant costs to the owning utility. In its current stage of development the prototype demonstrates four advanced functions operators can use to more efficiently monitor and control the plant. These advanced functions consist of: (1) a synthesized and intuitive high level overview display of system components and interrelations, (2) an enthalpy-based mathematical chemical and volume control system (CVCS) model to detect and diagnose component failures, (3) recommended strategies to mitigate component failure effects and return the plant back to pre-fault status, and (4) computer-based procedures to walk the operator through the recommended mitigation actions. The COSS was demonstrated to a group of operators and their feedback was collected. The operators responded positively to the COSS capabilities and features and indicated the system would be an effective operator aid. The operators also suggested several additional features and capabilities for the next iteration of development. Future versions of the COSS prototype will include additional plant systems, flexible computer-based procedure presentation formats, and support for simultaneous component fault diagnosis and dual fault synergistic mitigation action strategies to more efficiently arrest any plant upsets.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Permanent Magnet Synchronous Motors for Commercial Refrigeration (Final Report)

This report provides background information on various fractional-horsepower electric motor technologies used for evaporator fan applications in commercial refrigeration and summarizes data from a DOE-sponsored evaporator fan motor laboratory and field demonstration project. This report also extrapolates that data to project the potential economic and environmental benefits resulting from upgrading the current installed base of commercial refrigeration evaporator fan motors to permanent magnet synchronous (PMS) motors.Evaporator fan motors used in commercial refrigeration applications are fractional horsepower in size, responsible for moving air across the evaporator coil, and typically run at one speed. Historically, shaded-pole induction motors have been the most commonly used evaporator fan motors in commercial refrigeration equipment and beverage vending machines. These are the simplest and least expensive type of fractional-horsepower motor, with an efficiency of approximately 20%. Electronically commutated (EC) permanent magnet motors, also known as brushless DC motors, were initially commercialized in the late 1980s, and their use in commercial refrigeration applications has increased within the last 10 to 15 years because of economic incentives and regulatory requirements. State-of-the-art EC motors are approximately 66% efficient. Another induction motor type, the permanent split capacitor (PSC) motor, offers a mid-point between shaded-pole and EC motor price and efficiency levels. PSC motors are typically about 29% efficient.A permanent magnet synchronous (PMS) AC motor that can directly use grid-supplied AC current without the need to rectify to DC has recently been commercialized. This new motor exhibits a peak efficiency of 75% and has the potential to significantly reduce the energy consumption of evaporator fan motors in commercial refrigeration equipment. Laboratory evaluation of evaporator fan motor technologies was performed to quantify and compare the performance of shaded-pole, PSC, EC, and PMS evaporator fan motors in a controlled environment, so as to minimize the influence of external factors and anomalies. The laboratory evaluation included dynamometer testing of the fan motors and airflow testing of the motor/fan assemblies. It was found that the 6–12 W PMS motor exhibited a peak efficiency of 75% with a power factor of approximately 0.9 at a power output of 11 W. It was also found that a 38–50 W PMS motor exhibited a peak efficiency of 82% with a power factor of approximately 0.9 at a power output of 35 W.Airflow testing of shaded-pole, PSC, EC, and PMS motor/fan assemblies was performed using an airflow test chamber, which was designed in accordance with ANSI/AMCA Standard 210-16/ASHRAE Standard 51-16, to measure the performance of the subject motor/fan assembly and to determine the incumbent display case system impedance (AMCA 2016). A family of fan curves (static pressure vs airflow rate and electrical power input vs airflow rate) was generated for the 6–12 W PMS motor/fan assemblies with 8-inch fan blades pitched from 17 to 32 degrees. A similar set of curves was generated for the 38–50 W motors paired with 10 and 12-inch blades. Various incumbent motor/fan assemblies were also tested in the laboratory airflow test chamber and their fan curves were generated.Field evaluation of refrigerated display case evaporator fan motors was accomplished by performing side-by-side comparisons of 6–12 W PMS motors to 6–12 W shaded-pole and EC evaporator fan motors. It was found that, on average, a PMS motor consumes 79% less power and draws 82% less current than a shaded pole motor, and on average, 34% less power and 49% less current than an EC motor. In addition, the PMS motor exhibits an average power factor of approximately 0.82, which is on average 40% greater than that of existing evaporator fan motors.Two field test sites were selected to evaluate the performance of the larger 38 to 50 W PMS evaporator fan motors in walk-in cooler/freezer applications. At each supermarket, two walk-in units were selected for investigation: one walk-in dairy cooler and one walk-in freezer. A 61% decrease in fan motor power was measured when retrofitting existing evaporator fan motors with PMS motors in the walk-in cooler. In addition, a 48% decrease in fan motor power was measured when retrofitting existing evaporator fan motors with PMS motors in the walk-in freezer.The culmination of the field evaluation of fan motor technologies was a whole-store retrofit conducted at a supermarket. Pre- and post-retrofit measurement of evaporator fan motor power in medium- and low-temperature refrigerated display cases and walk-in coolers/freezers was performed. Overall for the whole-store retrofit, the current supplied to all monitored evaporator fan motors was reduced by 52%, the real power was reduced by 46% and the apparent power was reduced by 51% following the retrofit of the 262 evaporator fan motors that w

42 ENGINEERING↗

Influence of the Lamellar Phase Unbinding Energy on the Relative Stability of Lamellar and Inverted Cubic Phases

Based on curvature energy considerations, nonbilayer phase-forming phospholipids in excess water should form stable bicontinuous inverted cubic (Q{sub II}) phases at temperatures between the lamellar (L{sub {alpha}}) and inverted hexagonal (H{sub II}) phase regions. However, the phosphatidylethanolamines (PEs), which are a common class of biomembrane phospholipids, typically display direct L{sub {alpha}}/H{sub II} phase transitions and may form intermediate Q{sub II} phases only after the temperature is cycled repeatedly across the L{sub {alpha}}/H{sub II} phase transition temperature, T{sub H}, or when the H{sub II} phases are cooled from T>T{sub H}. This raises the question of whether models of inverted phase stability, which are based on curvature energy alone, accurately predict the relative free energy of these phases. Here we demonstrate the important role of a noncurvature energy contribution, the unbinding energy of the L{sub {alpha}} phase bilayers, g{sub u}, that serves to stabilize the L{sub {alpha}} phase relative to the nonlamellar phases. The planar L{sub {alpha}} phase bilayers must separate for a Q{sub II} phase to form and it turns out that the work of their unbinding can be larger than the curvature energy reduction on formation of Q{sub II} phase from L{sub {alpha}} at temperatures near the L{sub {alpha}}/Q{sub II} transition temperature (T{sub Q}). Using g{sub u} and elastic constant values typical of unsaturated PEs, we show that g{sub u} is sufficient to make T{sub Q}>T{sub H} for the latter lipids. Such systems would display direct L{sub {alpha}}{yields}H{sub II} transitions, and a Q{sub II} phase might only form as a metastable phase upon cooling of the H{sub II} phase. The g{sub u} values for methylated PEs and PE/phosphatidylcholine mixtures are significantly smaller than those for PEs and increase T{sub Q} by only a few degrees, consistent with observations of these systems. This influence of g{sub u} also rationalizes the effect of some aqueous solutes to increase the rate of Q{sub II} formation during temperature cycling of lipid dispersions. Finally, the results are relevant to protocols for determining the Gaussian curvature modulus, which substantially affects the energy of intermediates in membrane fusion and fission. Recently, two such methods were proposed based on measuring T{sub Q} and on measuring Q{sub II} phase unit cell dimensions, respectively. In view of the effect of g{sub u} on T{sub Q} that we describe here, the latter method, which does not depend on the value of g{sub u}, is preferable.

59 BASIC BIOLOGICAL SCIENCES↗