Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Density functional calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Coupling computational thermodynamics with density-function-theory based calculations to design L12 precipitates in Fe Ni based alloys

Achieving a high-volume fraction of thermodynamically stable L12-type precipitates that are resistant to coarsening is of great importance for the development of low-cost FeNi based austenitic steels. With the aid of computational thermodynamics, this work designed two model alloys: Fe-37.4Ni-6.1Al-2.9Ti (FNAT) and Fe-45.2Ni-5.9Al-8.5Si (FNAS). Both alloys were designed to contain a similar amount of L1 2 precipitate in Fe-Ni matrix without forming other precipitates. Density-Function-Theory (DFT) calculation was coupled with computational thermodynamics to predict the critical radius at which the precipitates change shape from spherical to cuboidal. The calculation results suggest that critical radius for the FNAT alloy is about two orders of magnitude larger than that for the FeNiAlSi alloy. Phase stability and morphology of the L1 2 precipitates in these two alloys were experimentally investigated through X-ray diffraction, atom probe tomography, and scanning and transmission electron microscopy. The L1 2 precipitates in the FeNiAlSi system were found to be cuboidal and rod shaped, with much larger size than the spherical ones in the FeNiAlTi system, agreeing with the calculation results. This work suggested that coupling computational thermodynamics with DFT calculations can be reliably used to design L1 2 precipitates in FeNi based alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hybrid functional calculations of electronic structure and carrier densities in rare-earth monopnictides

The structural parameters and electronic structure of rare-earth pnictides are calculated using density functional theory (DFT) with the Heyd, Scuseria, and Ernzerhof (HSE06) screened hybrid functional. Specifically, we focus on RE-V compounds, with RE=La, Gd, Er, and Lu, and V=As, Sb, and Bi, and analyze the effects of spin-orbit coupling and treating the RE4$\textit{f}$ electrons as valence electrons in the projector augmented wave approach. The results of HSE06 calculations are compared with DFT within the generalized gradient approximation (DFT-GGA) and other previous calculations. We find that all these RE-V compounds are semimetals with electron pockets at the $\textit{X}$ point and hole pockets at Γ. Whereas in DFT-GGA the carrier density is significantly overestimated, the computed carrier densities using HSE06 is in good agreement with the available experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Surface Studies of β-1,3,5,7-Tetranitro-1,3,5,7-Tetrazoctane and Pentaerythritol Tetranitrate from Density Functional Tight-Binding Calculations and Implications on Crystal Shape

Here, we use density functional tight-binding (DFTB) theory to calculate the surface energies of two energetic crystals: monoclinic β-1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (β-HMX) and tetragonal pentaerythritol tetranitrate (PETN). The results are then employed to determine crystal shapes using the Bravais–Friedel–Donnay–Harker, attachment energy, and surface energy models. We find that energy-based models yield predictions in good agreement with experimental observations. Additionally, we propose a simple model that reframes surface energy as a measure of the lost intermolecular interactions during the formation of a surface from the bulk. The model accurately captures the results from the DFTB calculations and enables us to explain and predict surface energies as a function of the local molecular environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

First-principles calculation of the configurational energy density of states for a solid-state ion conductor with a variant of the Wang and Landau algorithm

In this work, a variant of the Wang and Landau algorithm for calculation of the configurational energy density of states is proposed. The algorithm was developed for the purpose of using first-principles simulations, such as density functional theory, to calculate the partition function of disordered sublattices in crystal materials. The expensive calculations of first-principles methods make a parallel algorithm necessary for a practical computation of the configurational energy density of states within a supercell approximation of a solid-state material. The algorithm developed in this work is tested with the two-dimensional (2d) Ising model to bench mark the algorithm and to help provide insight for implementation to a materials science application. Tests with the 2d Ising model revealed that the algorithm has good performance compared to the original Wang and Landau algorithm and the 1/$\textit{t}$ algorithm, in particular the short iteration performance. Further, a proof of convergence is presented within an adiabatic assumption, and the analysis is able to correctly predict the time dependence of the modification factor to the density of states. The algorithm was then applied to the lithium and lanthanum sublattice of the solid-state lithium ion conductor Li 0.5 La 0.5 TiO 3 . This was done to help understand the disordered nature of the lithium and lanthanum. The results find, overall, that the algorithm performs very well for the 2d Ising model and that the results for Li 0.5 La 0.5 TiO 3 are consistent with experiment while providing additional insight into the lithium and lanthanum ordering in the material. The primary result is that the lithium and lanthanum become more mixed between layers along the c axis for increasing temperature. In part, the simulation of the disordered Li 0.5 La 0.5 TiO 3 system serves as a benchmark for what size systems are currently and in the near future practical to calculate with density functional theory methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics

Accurately modeling dense plasmas over wide-ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/$\mathrm{cm^3}$ to 16 g/$\mathrm{cm^3}$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature method. Here, we find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the sesame database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT-MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Crystal structure of the $τ_{11}$ Al 4 Fe 1.7 Si phase from neutron diffraction and ab initio calculations

The intermetallic τ 11 Al 4 Fe 1.7 Si phase is of interest for high-temperature structural application due to its combination of low density and high strength. We determine the crystal structure of the τ 11 phase through a combination of powder neutron diffraction and density functional theory calculations. Using Pawley and Rietveld refinements of the neutron diffraction data provides an initial crystal structure model. Since Al and Si have nearly identical neutron scattering lengths, we use density-functional calculations to determine their preferred site occupations. The τ 11 phase exhibits a hexagonal crystal structure with space group P6 3 /mmc and lattice parameters of a = 7.478 Å and c = 7.472 Å. The structure comprises five Wyckoff positions; Al occupies the 6h and 12k sites, Fe the 2a and 6h sites, and Si the 2a sites. Here we observe site disorder and partial occupancies on all sites with a large fraction of 80% Fe vacancies on the 2d sites, indicating an entropic stabilization of the τ 11 phase at high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomic-Site-Specific Surface Valence-Band Structure from X-Ray Standing-Wave Excited Photoemission

X-ray standing-wave (XSW) excited photoelectron emission was used to measure the site-specific valence band (VB) for ½ monolayer (ML) Pt grown on a SrTiO 3 (001) surface. The XSW induced modulations in the core level (CL), and VB photoemission from the surface and substrate atoms were monitored for three ℎ⁡kl substrate Bragg reflections. The XSW CL analysis shows the Pt to have a face-centered-cubic-like cube-on-cube epitaxy with the substrate. The XSW VB information compares well to a density functional theory calculated projected density of states from the surface and substrate atoms. Altogether, this Letter represents a novel method for determining the contribution to the density of states by valence electrons from specific atomic surface sites.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Orbital contributions in the element-resolved valence electronic structure of Bi 2 Se 3

In this work, we studied the bulk band structure of a topological insulator (TI) Bi 2 Se 3 and determined the contributions of the Bi and Se orbital states to the valence bands using standing-wave excited hard x-ray photoemission spectroscopy (SW-HAXPES). This SW technique can provide the element-resolved information and extract individual Bi and Se contributions to the Bi2Se3 valence band. Comparisons with density-functional theory calculations (local density approximation and GW) reveal that the Bi 6s, Bi 6p, and Se 4p states are dominant in the Bi 2 Se 3 HAXPES valence band. Furthermore, these findings pave a way for studying the element-resolved band structure and orbital contributions of this class of TIs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

2023 American Society for Mass Spectrometry (ASMS) 71st Annual Conference on Mass Spectrometry and Allied Topics

Introduction (120 words max) Understanding metal-cluster chemistry occuring at solvent boundaries in the aqueous and organic phases has applications in environments from cellular processes to nuclear fuel reprocessing. Transport of metal ions at the boundaries from aqueous to organic phases involves forming a metal-ligand complex, and wherever the initial metal coordination environment is significantly different from the final one, the metal transitions through a series of transient species in passing from one phase to another. Here an investigation of the role of coordination in the chemistry of the transient species using gas-phase measurements that are free of solvent effects to better understand the binding of complexes of metals with triphenylphosphine chalcogenide ligands, examining metal-ligand homo- and hetero-dimers to better understand transient species. Methods (120 word max) Mass spectrometry and collision induced dissociation (CID) experiments were performed with a Bruker (Billerica, MA, USA) micrOTOF-Q II quadrupole time-of-flight mass spectrometer (QTOF) and Bruker amaZon speed ETD (ion trap). High resolution/high mass accuracy spectra were generated using the QTOF. External calibration was performed with Agilent (Santa Clara, CA, USA) ESI-L Low Concentration tuning mix. Both mass spectrometers were equipped with either the electrospray ionization source or nanospray sources. Metal samples were prepared between 40 – 60 uM of the metal-ligand complex in 25% water and 75% acetonitrile. Metal-ion clusters were isolated and subjected to collision induced dissociation. Density functional theory calculations were performed. Preliminary Data or Plenary Speakers Abstract (300 words max) Metal ion clusters with triphenylphosphine chalcogenide ligands were observed for group I metals with triphenylphosphine chalcogenide samples in the mass spectrum upon electrospray ionization. For each metal ligand complex of interest, the parent ion was isolated and collision induced dissociation fragmentation spectra were acquired. We observed clusters of group I metal with triphenylphosphine oxide, triphenyl phosphine sulfide, and triphenylphosphine selenide, with homodimers and heterodimer formation. In samples where the ligands were mixed, we observed mixed sodium ligand clusters at varying amounts. These mixed ligand clusters were fragmented. Metal clusters of mixed ligand dimers containing triphenylphosphine oxide showed preferential loss of the other ligand, either triphenylphosphine sulfide or triphenyl selenide. In samples with mixed triphenylphosphine sulfide and triphenylphosphine selenium ligands, sodium bound similarly between the ligands, and losses were more evenly split, showing loss ratio upon CID with losses of triphenylphosphine sulfide:triphenylphosphine selenide 43:57 ratio observed on CID. These results suggest that the oxide binds significantly more strongly than either the selenium or sulfur triphenylphosphine ligand, and the sulfur and selenium ligands are more evenly bound. Calculations were performed using density functional theory to calculate likely structures and bond energies between the group I metal and the ligands. Novel Aspect Novel analysis of sodium bound dimers with chalcogenide triphenylphosphine ligands were investigated using mass spectrometry and theoretical calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2020

Comparing the performance of density functionals in describing the adsorption of atoms and small molecules on Ni(111)

Reaction networks calculated using density functional theory (DFT) play a crucial role in understanding and predicting heterogeneous catalyst performance. However, results obtained using different density functionals can vary significantly. Accordingly, it is important to assess the accuracy of available functionals in capturing adsorption energetics derived from single-crystal adsorption microcalorimetry experiments. Here, we evaluate how different density functionals describe the molecular and dissociative adsorption of CH 3 I, the adsorption of CH 3 , I, and H, and the dissociative adsorption of CH 4 on Ni(111). First, we identify energetically-preferred adsorbed states for each adsorbate at three surface coverages and calculate the corresponding enthalpies of adsorption at 160 K. Then, we compare the results to experimental measurements published in the literature. For each adsorption process we find at least one functional that is quantitatively accurate within experimental error, but no functional is accurate (within experimental error) for all adsorption processes studied. Even when assuming an additional DFT error of ±20 kJ/mol on top of the experimental error, only the PBE-D3 and RPBE-D3 functionals are accurate for all considered adsorption systems. Overall, these results indicate that quantitative agreement between density functional theory calculations and experimental measurements is both system- and functional-dependent. Importantly, single-crystal adsorption microcalorimetry experiments will continue to play an important role for benchmarking density functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nuclear energy density functionals grounded in ab initio calculations

Here, we discuss the construction of a nuclear energy density functional (EDF) from ab initio computations and advocate the need for a methodical approach that is free from ad hoc assumptions. The equations of state (EoSs) of symmetric nuclear and pure neutron matter are computed using the chiral NNLO sat and the phenomenological AV4' + UIX c Hamiltonians as inputs to self-consistent Green's function (SCGF) and auxiliary field diffusion Monte Carlo (AFDMC) methods. We propose a convenient parametrization of the EoS as a function of the Fermi momentum and fit it on the SCGF and AFDMC calculations. We apply the ab initio based EDF to carry out an analysis of the binding energies and charge radii of different nuclei in the local density approximation. The NNLO sat -based EDF produces encouraging results, whereas the AV4' + UIX c -based one is farther from experiment. Possible explanations of these different behaviors are suggested, and the importance of gradient and spin-orbit terms is analyzed. Our paper paves the way for a practical and systematic way to merge ab initio nuclear theory and density functional theory, while shedding light on some critical aspects of this procedure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Fermi–Löwdin orbital self-interaction correction of adsorption energies on transition metal ions

Density functional theory (DFT)-based descriptions of the adsorption of small molecules on transition metal ions are prone to self-interaction errors. Here, we show that such errors lead to a large over-estimation of adsorption energies of small molecules on Cu + , Zn + , Zn 2+ , and Mn + in local spin density approximation (LSDA) and Perdew, Burke, Ernzerhof (PBE) generalized gradient approximation calculations compared to reference values computed using the coupled-cluster with single, doubles, and perturbative triple excitations method. These errors are significantly reduced by removing self-interaction using the Perdew–Zunger self-interaction correction (PZ-SIC) in the Fermi–Löwdin Orbital (FLO) SIC framework. In the case of FLO-PBE, typical errors are reduced to less than 0.1 eV. Furthermore, analysis of the results using DFT energies evaluated on self-interaction-corrected densities [DFT(@FLO)] indicates that the density-driven contributions to the FLO-DFT adsorption energy corrections are roughly the same size in DFT = LSDA and PBE, but the total corrections due to removing self-interaction are larger in LSDA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Equation of state for 304L stainless steel

Here, a new equation of state for 304L stainless steel has been constructed and entered in the Los Alamos National Laboratory SESAME database with material ID 4273. The equation of state is based on a multiphase approach. The solid and liquid phases were fitted to available experimental data for thermal expansion, heat capacity, and shock Hugoniot, as well as to data from density functional theory calculations of the cold curve and quantum molecular dynamics of the liquid regime. The electronic thermal contribution over the entire equation of state range is based on Tartarus (Green’s functions) average atom calculations. For this low-carbon stainless steel both the density functional and electronic thermal calculations are comprised of 19 wt% Cr, 10 wt% Ni, and the remainder Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A -type antiferromagnetic order in the Zintl-phase insulator EuZn 2 P 2

Zintl phases, containing strongly covalently bonded frameworks with separate ionically bonded ions, have emerged as a critical materials family in which to couple magnetism and strong spin-orbit coupling to drive diverse topological phases of matter. Here we report the single-crystal synthesis, magnetic, thermodynamic, transport, and theoretical properties of the Zintl compound EuZn 2 P 2 that crystallizes in the anti-La 2 O 3 (CaAl 2 Si 2 ) P-3m1 structure, containing triangular layers of Eu 2+ ions. In-plane resistivity measurements reveal insulating behavior with an estimated activation energy of E g = 0.11eV. Specific heat and magnetization measurements indicate antiferromagnetic ordering at T N = 23K. Curie-Weiss analysis of in-plane and out of plane magnetic susceptibility from T = 150 to 300 K yields p eff = 8.61 for μ 0 H⊥c and p eff = 7.74 for μ 0 H//c, close to the expected values for the 4f 7 J = S = 7/2 Eu 2+ ion and indicative of weak anisotropy. Below T N , a significant anisotropy of χ ⊥ /χ // ≈ 2.3 develops, consistent with A-type magnetic order as observed in isostructural analogs and as predicted by the density functional theory calculations reported herein. The positive Weiss temperatures of θ W =19.2K for μ 0 H⊥c and θ W =41.9K for μ 0 H//c show a similar anisotropy and suggest competing ferromagnetic and antiferromagnetic interactions. Comparing Eu magnetic ordering temperatures across trigonal EuM 2 X 2 (M= divalent metal, X= pnictide) shows that EuZn 2 P 2 exhibits the highest ordering temperature, with variations in T N correlating with changes in expected dipolar interaction strengths within and between layers and independent of the magnitude of electrical conductivity. These results provide experimental validation of the crystochemical intuition that the cation Eu 2+ layers and the anionic (M 2 X 2 ) 2– framework can be treated as electronically distinct subunits, enabling further predictive materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Prospects for n -type doping of (Al x Ga 1– x ) 2 O 3 alloys

Here we systematically explore the properties of group-IV (C, Si, Ge, and Sn) and transition metal (Hf, Zr, and Ta) dopants substituting on the cation site in (Al x Ga 1– x ) 2 O 3 (AlGO) alloys using first-principles calculations with a hybrid functional. In Ga 2 O 3 , each of these dopants acts as a shallow donor. In Al 2 O 3 , they are deep defects characterized by the formation of either DX centers or positive- U (+/0) levels. Combining our calculations of dopant charge-state transition levels with information of the AlGO alloy band structure, we estimate the critical Al composition at which each dopant transitions from being a shallow to a deep donor. We identify Si to be the most efficient dopant to achieve n -type conductivity in high Al-content AlGO alloys, acting as a shallow donor over the entire predicted stability range for AlGO solid solution alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of defects in ultra-high gain in fast planar tin gallium oxide UV-C photodetector by MBE

Here we report ultra-high responsivity of epitaxial (Sn x Ga 1–x ) 2 O 3 (TGO) Schottky UV-C photodetectors and experimentally identified the source of gain as deep-level defects, supported by first principles calculations. Epitaxial TGO films were grown by plasma-assisted molecular beam epitaxy on (–201) oriented n-type β-Ga 2 O 3 substrates. Fabricated vertical Schottky devices exhibited peak responsivities as high as 3.5 ×10 4 A/W at –5 V applied bias under 250 nm illumination with sharp cutoff shorter than 280 nm and fast rise/fall time in milliseconds order. Hyperspectral imaging cathodoluminescence (CL) spectra were examined to find the mid-bandgap defects, the source of this high gain. Irrespective of different tin mole fractions, the TGO epilayer exhibited extra CL peaks at the green band (~2.20 eV) not seen in β-Ga 2 O 3 along with enhancement of the blue emission-band (~2.64 eV) and suppression of the UV emission-band. Based on hybrid functional calculations of the optical emission expected for defects involving Sn in β-Ga 2 O 3 , V Ga –Sn complexes are proposed as potential defect origins of the observed green and blue emission-bands. Such complexes behave as acceptors that can efficiently trap photogenerated holes and are predicted to be predominantly responsible for the ultra-high photoconductive gain in the Sn-alloyed Ga 2 O 3 devices by means of thermionic emission and electron tunneling. Regenerating the V Ga –Sn defect complexes by optimizing the growth techniques, we have demonstrated a planar Schottky UV-C photodetector of the highest peak responsivity.

36 MATERIALS SCIENCE↗