Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A preliminary investigation of drag reduction and mechanism for a blunt body of revolution with slanted base

This is a preliminary study of the drag reduction effect and its mechanism of a blunt body of revolution with a 21-deg slant angle by using a series of base plates. Drag coefficients were measured to investigate the effect of base installation position and plate height. An effective drag reduction device was found. Through the measurement of base pressure and total pressure distribution and flow pattern display, flow characteristics and drag reduction mechanism in the vortex near the wake were investigated.

Xia, Xuejian↗
NASA NTRS1934

The effect of weight and drag on the sinking speed and lift/drag ratio of gliders

The most important factors in evaluating performance of gliders are minimum sinking speed and minimum gliding angle. To assure their optimum value the energy necessary for flight, that is, the energy of lift and friction must be kept very low, or in other words, weight and total drag which have a decisive effect on the sinking speed and on the gliding angle, must be kept to a minimum. How great the effect of a reduction of these two quantities will be shown in the following.

Kosin, R↗
NASA NTRS2003

Simulated Fuel Usage for Drag Compensated Spacecraft in Low Earth Orbit

Atmospheric drag causes the greatest uncertainty in the spacecraft flight dynamics equation for spacecraft in Low Earth Orbit (LEO). The continuously varying atmospheric density levels require increased spacecraft tracking to accurately predict spacecraft location. In addition, periodic propulsive maneuvers must be designed and performed to counteract the effects of drag on the spacecraft orbit. If atmospheric drag effects can be continuously and autonomously counteracted through the use of a drag-free control system, they will essentially be eliminated from the spacecraft flight dynamics equation. The main perturbations on the spacecraft will then be those due to the Earth s gravitational field, which are easily predicted. Although theoretically beneficial from a flight dynamics perspective, the costs associated with drag-free control must be determined and weighed against those benefits before the feasibility of drag-free control of spacecraft in LEO can be determined. Through the use of a MATLAEV Satellite Tool Kit simulation, this paper attempts to quantify one such cost associated with drag-free control: the amount of fuel needed for continuous drag compensation as measured by cumulative orbital velocity changes, or AV. This AV cost can then be compared to the fuel required for more traditional, periodic orbit raising maneuvers of every two to four weeks. The simulation considers various sized spacecraft, as measured by the spacecraft ballistic coefficient, in circular orbits of various altitudes and inclinations. The time between orbit raising maneuvers is allowed to decrease until it approaches near continuous. In this manner, the trend in AV cost can be seen as drag compensation moves from periodic to near continuous.

Fleck, Melissa E.↗
NASA NTRS1951

Deplacement effect of the laminar boundary layer and the pressure drag

The displacement effect of the boundary layer on the outer frictionless flow is discussed for both steady and unsteady flows. The analysis is restricted to cases in which the potential flow pressure distribution remains valid for the boundary-layer calculation. Formulas are given for the dependence of the pressure drag, friction drag, and total drag of circular cylinders on the time from the start of motion for cases in which the velocity varies as a power of the time. Formulas for the locations and for the time for the appearance of the separation point are given for two dimensional bodies of arbitrary shape.

THEORIES - BOUNDARY LAYER - LAMINAR↗
NASA NTRS1977

New contributions to the problem of capture

Libration-point capture is analyzed in the framework of the restricted three-body problem in order to obtain general results capable of predicting the major features of an arbitrary postcapture orbit, with specific reference to capture as the presumed mode of origin of Jupiter's outer satellites. Some examples of libration-point capture are computed, the time a body remains captured is estimated, and a long-term numerical integration of orbits is carried out which shows that the equation used to estimate capture lifetimes is quite conservative. An extended capture criterion is proposed and used to demonstrate that direct postcapture orbits lie outside retrograde ones. Mass change involving one or both primaries is evaluated as a means of producing permanent capture, it is found that mass-change effects can produce 'pull-down capture', and consideration is given to the orbital evolution of Jupiter's outer satellites. The effect of drag in the solar nebula or in a nebula around proto-Jupiter on the capture process is briefly investigated. It is concluded that a capture origin for the outer satellites is improbable within the last 4.6 billion years but that either mass change or nebula drag could have been effective in producing capture.

Heppenheimer, T. A.↗
NASA NTRS1937

The Effect of Turbulence on the Drag of Flat Plates

in determining the effect of turbulence on the forces exerted on bodies in the air stream of a wind tunnel, it is commonly assumed that the indications of the standard Pitot-static tube used to determine the air speed are not dependent on the turbulence. To investigate the truth of this assumption, the drag of a normally exposed flat plate, the difference in pressure between the front and rear of a thin circular disk, the rate of rotation of a vane anemometer, and the pressure developed by a standard Pitot-static tube were measured in an air stream for several conditions of turbulence. The results may be interpreted as indicating that there is no appreciable effect of turbulence on the vane anemometer and the standard pitot-static tube, but that there is small effect on the drag of a flat plate and the pressure difference between front and rear of a disk.

Schubauer, G B↗
NASA NTRS1958

Jet Effects on the Base Drag of a Cylindrical Afterbody with Extended Nozzles

A wind-tunnel investigation to determine the effects of both single and twin jets on base drag of a cylindrical body has been conducted at Mach numbers from 0.6 to 1.4. The plane of the jet exit was varied with respect to that of the afterbody. Jet total-pressure ratio ranged up to 20. Significant improvements in base drag were obtained by extending the plane of the jet exits beyond the afterbody base and by venting the base cavity to the external stream.

Nelson, William J↗
NASA NTRS1975

Effects of nacelle shape on drag and weight of a supersonic cruising aircraft

The quantitive relationship of cruise drag and nacelle shape was investigated for a representative advanced supersonic transport configuration. Nacelle shape parameters were systematically varied, and the effects of these variations on wave and friction drag were determined. The effects of changes in vehicle drag, propulsion weight, and specific fuel consumption on vehicle takeoff gross weight were computed. Generally, it was found that nacelle shapes such that the maximum cross-sectional area occurred at or near the nozzle exit resulted in the lowest wave drag. In fact, nacelle shapes were found that produce favorable interference effects (drag reduction) of such magnitude as to nearly offset the friction drag of the nacelle.

Bonner, E.↗
NASA NTRS1976

An experimental and analytical investigation of effect on isolated boattail drag of varying Reynolds numbers up to 130,000,000

An investigation was conducted to determine whether large Reynolds number effects occur on isolated boattails, including an analytical study and tests in a 1/3-meter transonic cryogenic tunnel. This investigation was conducted at an angle of attack of 0 deg at Mach numbers from 0.6 to 0.9 for Reynolds numbers up to 130 million. Results indicate that as the Reynolds number was increased, the static pressure coefficients in the expansion region of the boattail became more negative whereas those in the recompression region became more positive. These two trends were compensating and, as a result, there was only a small effect (if any) of Reynolds numbers on boattail pressure drag.

Reubush, D. E.↗
NASA NTRS1971

Results of a study of Mach number and Reynolds number effects on the crossflow drag characteristics of ogive cylinders and ogive-cylinder-frustum-cylinders at angles of attack to 30 degrees

An analysis was made to determine the effects of Mach number and Reynolds number on the local and total crossflow drag characteristics of ogive-cylinders and ogive-cylinder-frustum-cylinders at angles of the MSFC 14 in TWT and the LTV 4 ft HSWT, and pressure data obtained in the TWT, at Mach numbers 0.14, 0.8, 1.2, and 2.0, and a wide range of Reynolds numbers. Results indicate that the streamwise Reynolds number, VD/nusin alpha, is an important correlation parameter in the subcritical Reynolds number range at imcompressible speeds and that the crossflow Mach number correlates compressibility effects.

Foley, J. E.↗
NASA NTRS1982

Cooling Air Inlet and Exit Geometries on Aircraft Engine Installations

A semispan wing and nacelle of a typical general aviation twin-engine aircraft was tested to evaluate the cooling capability and drag or several nacelle shapes; the nacelle shapes included cooling air inlet and exit variations. The tests were conducted in the Ames Research Center 40 x 80-ft Wind Tunnel. It was found that the cooling air inlet geometry of opposed piston engine installations has a major effect on inlet pressure recovery, but only a minor effect on drag. Exit location showed large effect on drag, especially for those locations on the sides of the nacelle where the suction characteristics were based on interaction with the wing surface pressures.

Katz, Joseph↗