Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOSAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Perioperative Timing of Infliximab and the Risk of Serious Infection After Elective Hip and Knee Arthroplasty

Objective The optimal timing of tumor necrosis factor antagonists before elective surgery is unknown. This study evaluated the association between infliximab timing and serious infection after elective hip or knee arthroplasty. Methods A retrospective cohort study evaluated US Medicare patients with rheumatoid arthritis, inflammatory bowel disease, psoriasis, psoriatic arthritis, or ankylosing spondylitis who received infliximab within 6 months of elective knee or hip arthroplasty from 2007 to 2013. Propensity‐adjusted analyses examined whether infliximab stop timing (time between the most recent infusion and surgery) was associated with hospitalized infection within 30 days or prosthetic joint infection ( PJI ) within 1 year. Results Hospitalized infection within 30 days occurred after 270 of 4,288 surgeries (6.3%). Infliximab stop timing <4 weeks versus 8–12 weeks was not associated with an increase in infection within 30 days (propensity‐adjusted odds ratio [ OR ] 0.90 [95% confidence interval (95% CI ) 0.60–1.34]). The rate of PJI was 2.9 per 100 person‐years and was not increased in patients with stop timing <4 weeks versus 8–12 weeks (hazard ratio [ HR ] 0.98 [95% CI 0.52–1.87]). Glucocorticoid dosage >10 mg/day was associated with increased risk of 30‐day infection ( OR 2.11 [95% CI 1.30–3.40]) and PJI ( HR 2.70 [95% CI 1.30–5.60]). Other risk factors for infection included elderly age, comorbidities, revision surgery, and previous hospitalized infection. Conclusion Administering infliximab within 4 weeks of elective knee or hip arthroplasty was not associated with a higher risk of short‐ or long‐term serious infection compared to withholding infliximab for longer time periods. Glucocorticoid use, especially >10 mg/day, was associated with an increased infection risk.

George, Michael D.↗

High‐Concentration Antibody Formulation via Solvent‐Based Dehydration

Abstract Although subcutaneous (SC) delivery is the preferred administration route for immunotherapies and other biologics for improved patient compliance and lower healthcare costs, it necessitates high‐concentration antibody formulations. However, high‐concentration antibody solutions face significant instabilities and prohibitively high viscosities. Other approaches for high‐concentration formulations have been developed, including non‐aqueous solutions, which can be irritating or painful, and antibody‐laden hydrogel microparticles, which require centrifugation and are limited to concentrations <300 mg mL −1 . This work presents a new formulation process wherein the antibody is concentrated and encapsulated into hydrogel microparticles via solvent‐based dehydration. The final dosage form is an aqueous particle suspension with a formulation concentration of 360 mg mL −1 . In this process, microparticles are synthesized continuously, and antibody precipitation is realized simultaneously to dehydration, which allows for higher antibody concentrations. Antibody phase behavior and precipitation–dehydration kinetics are analyzed. The antibody is structurally and functionally stable in the microparticle post‐processing and after 4 months. Injectability of the suspension meets clinical standards with glide force <20 N. For the first time, an aqueous antibody formulation at high concentrations comparable to non‐aqueous formulations is presented, ideal for subcutaneous administration. The process is envisioned to be generalizable as a platform for SC delivery in multiple clinical applications.

Zheng, Talia [Department of Chemical Engineering M↗

Electronic Transport and Ferroelectric Switching in Ion-Bombarded, Defect-Engineered BiFeO 3 Thin Films

Despite continued interest in the multiferroic BiFeO 3 for a diverse range of applications, use of this material is limited by its poor electrical leakage. This work demonstrates some of the most resistive BiFeO 3 thin films reported to date via defect engineering achieved via high-energy ion bombardment. High leakage in as-grown BiFeO 3 thin films is shown to be due to the presence of moderately shallow isolated trap states, which form during growth. Ion bombardment is shown to be an effective way to reduce this free carrier transport (by up to ≈4 orders of magnitude) by trapping the charge carriers in bombardment-induced, deep-lying defect complexes and clusters. The ion bombardment is also found to give rise to an increased resistance to switching as a result of an increase in defect concentration. This study demonstrates a systematic ion-dose-dependent increase in the coercivity, extension of the defect-related creep regime, increase in the pinning activation energy, decrease in the switching speed, and broadening of the field distribution of switching. Ultimately, the use of such defect-engineering routes to control materials will require identification of an optimum range of ion dosage to achieve maximum enhancement in resistivity with minimum impact on ferroelectric switching.

36 MATERIALS SCIENCE↗

Using steam explosion or AFEX™ to produce animal feeds and biofuel feedstocks in a biorefinery based on sugarcane residues: Using Steam Explosion or AFEX™ to Produce Animal Feeds and Biofuel Feedstocks in a Biorefinery Based on Sugarcane Residues

Sustainable integration of biofuel (primarily bioethanol) and highly digestible livestock feed in production systems is a potential way to increase the economic returns to agriculture and simultaneously promote energy security, particularly in developing countries. In this work we evaluated the efficacy of steam explosion (StEx) and ammonia fiber expansion (AFEX™) as potential processes for improving the in vitro rumen digestibility, metabolizable energy, and ethanol yields from sugarcane crop residues (bagasse and cane leaf matter, CLM). Ammonia fiber expansion pretreatment enhanced the in vitro true digestibility and metabolizable energy content of sugarcane crop residues by 69% and 26%, respectively compared to untreated controls. On the other hand, StEx increased the true digestibility and metabolizable energy content of the sugarcane residues by 54% and 7%, respectively. Ammonia fiber expansion also increased the total nitrogen content of both sugarcane bagasse and CLM to more than 20.2 g kg -1 dry forage, a more than 230% improvement relative to untreated controls. High solid-loading enzymatic hydrolysis and fermentation of StEx- and AFEX™-pretreated sugarcane crop residues generated yields of up to 3368 and 4360 L of ethanol per hectare of sugarcane cultivated, respectively, at a biomass-degrading enzyme dosage of 20 mg protein per gram glucan. This research strongly suggests that the use of suitably pretreated sugarcane crop residues in integrated sugarcane biofuel-livestock production systems can increase the total per hectare agricultural output without increasing the area of sugarcane cultivated. In effect, this integrated approach promotes more sustainable biofuel production and increased food production while avoiding the potential for indirect land use change.

09 BIOMASS FUELS↗

Ancillary contributions of heterologous biotin protein ligase and carbonic anhydrase for CO 2 incorporation into 3-hydroxypropionate by metabolically engineered Pyrococcus furiosus

Acetyl-Coenzyme A carboxylase (ACC), malonyl-CoA reductase (MCR), and malonic semialdehyde reductase (MRS) convert HCO 3 – and acetyl-CoA into 3-hydroxypropionate (3HP) in the 3-hydroxypropionate/4-hydroxybutyrate carbon fixation cycle resident in the extremely thermoacidophilic archaeon Metallosphaera sedula . These three enzymes, when introduced into the hyperthermophilic archaeon Pyrococcus furiosus , enable production of 3HP from maltose and CO 2 . Sub-optimal function of ACC was hypothesized to be limiting for production of 3HP, so accessory enzymes carbonic anhydrase (CA) and biotin protein ligase (BPL) from M. sedula were produced recombinantly in Escherichia coli to assess their function. P. furiosus lacks a native, functional CA, while the M. sedula CA (Msed_0390) has a specific activity comparable to other microbial versions of this enzyme. M. sedula BPL (Msed_2010) was shown to biotinylate the β-subunit (biotin carboxyl carrier protein) of the ACC in vitro. Since the native BPLs in E. coli and P. furiosus may not adequately biotinylate the M. sedula ACC, the carboxylase was produced in P. furiosus by co-expression with the M. sedula BPL. The baseline production strain, containing only the ACC, MCR, and MSR, grown in a CO 2 -sparged bioreactor reached titers of approximately 40 mg/L 3HP. Strains in which either the CA or BPL accessory enzyme from M. sedula was added to the pathway resulted in improved titers, 120 or 370 mg/L, respectively. The addition of both M. sedula CA and BPL, however, yielded intermediate titers of 3HP (240 mg/L), indicating that the effects of CA and BPL on the engineered 3HP pathway were not additive, possible reasons for which are discussed. Here, while further efforts to improve 3HP production by regulating gene dosage,

3-hydroxypropionate↗

Balancing Doses of EL222 and Light Improves Optogenetic Induction of Protein Production in Komagataella phaffii

ABSTRACT Komagataella phaffii, also known asPichia pastoris, is a powerful host for recombinant protein production, in part due to its exceptionally strong and tightly controlled P AOX1 promoter. MostK. phaffiibioprocesses for recombinant protein production rely on P AOX1 to achieve dynamic control in two‐phase processes. Cells are first grown under conditions that repress P AOX1 (growth phase), followed by methanol‐induced recombinant protein expression (production phase). In this study, we propose a methanol‐free approach for dynamic metabolic control inK. phaffiiusing optogenetics, which can help enhance input tunability and flexibility in process optimization and control. The light‐responsive transcription factor EL222 fromErythrobacter litoralisis used to regulate protein production from the P C120 promoter inK. phaffiiwith blue light. We used two system designs to explore the advantages and disadvantages of coupling or decoupling EL222 integration with that of the gene of interest. We investigate the relationship between EL222 gene copy number and light dosage to improve production efficiency for intracellular and secreted proteins. Experiments in lab‐scale bioreactors demonstrate the feasibility of the outlined optogenetic systems as potential alternatives to conventional methanol‐inducible bioprocesses usingK. phaffii.

Biotechnology & Applied Microbiology↗

Concept of an upright wearable positron emission tomography imager in humans

Abstract Background Positron Emission Tomography ( PET ) is traditionally used to image patients in restrictive positions, with few devices allowing for upright, brain‐dedicated imaging. Our team has explored the concept of wearable PET imagers which could provide functional brain imaging of freely moving subjects. To test feasibility and determine future considerations for development, we built a rudimentary proof‐of‐concept prototype (Helmet_ PET ) and conducted tests in phantoms and four human volunteers. Methods Twelve Silicon Photomultiplier‐based detectors were assembled in a ring with exterior weight support and an interior mechanism that could be adjustably fitted to the head. We conducted brain phantom tests as well as scanned four patients scheduled for diagnostic F 18‐ FDG PET / CT imaging. For human subjects the imager was angled such that field of view included basal ganglia and visual cortex to test for typical resting‐state pattern. Imaging in two subjects was performed ~4 hr after PET / CT imaging to simulate lower injected F 18‐ FDG dose by taking advantage of the natural radioactive decay of the tracer (F 18 half‐life of 110 min), with an estimated imaging dosage of 25% of the standard. Results We found that imaging with a simple lightweight ring of detectors was feasible using a fraction of the standard radioligand dose. Activity levels in the human participants were quantitatively similar to standard PET in a set of anatomical ROI s. Typical resting‐state brain pattern activation was demonstrated even in a 1 min scan of active head rotation. Conclusion To our knowledge, this is the first demonstration of imaging a human subject with a novel wearable PET imager that moves with robust head movements. We discuss potential research and clinical applications that will drive the design of a fully functional device. Designs will need to consider trade‐offs between a low weight device with high mobility and a heavier device with greater sensitivity and larger field of view.

60 APPLIED LIFE SCIENCES↗

Aberration‐Corrected Transmission Electron Microscopy and In Situ XAFS Structural Characterization of Pt/γ‐Al 2 O 3 Nanoparticles

Abstract Aberration‐corrected (AC) STEM, AC TEM and in situ X‐ray absorption fine structure spectroscopy (XAFS) were used to characterize the Pt clusters present on a 0.35 wt % Pt on γ‐alumina support after reduction in hydrogen at 700 °C. STEM high‐angle annular dark field imaging shows that cluster formation takes place at temperatures up to approximately 350 °C, and this is followed by gradual growth in cluster size for heat treatments in hydrogen up to 700 °C. The STEM data show that after 700 °C reduction the Pt clusters are present in a narrow size distribution centered at 0.88 nm, and using a method involving a redistribution of the Pt atoms using a high electron dosage in the STEM, it is shown that the clusters are present in two‐dimensional morphology. This conclusion is verified using intensity line scans. The in situ extended X‐ray absorption fine structure data are in good agreement with these observations. High‐resolution AC–TEM, which uses a broad coherent electron beam, and can thus offer advantages relative to STEM for structure determination of fine clusters, supported by image simulations of through‐focus series, were used to analyze the structures of Pt particles. The structures determined by using AC–TEM are consistent with STEM and EXAFS data in having a flat two‐dimensional morphology. Comparison of AC–STEM and AC TEM data for the same 700 °C reduced sample suggests that parallel‐beam TEM mode of imaging may be advantageous because of the less pronounced beam‐induced structural rearrangements that occur when imaging with a fine STEM probe.

Sinkler, Wharton↗

Green synthesis of sulfur‐doped g‐C 3 N 4 nanosheets for enhanced removal of oxytetracycline under visible‐light irradiation and reduction of its N ‐nitrosodimethylamine formation potential

Abstract BACKGROUND In this study, sulfur‐doped g‐C 3 N 4 (SCN) nanosheets were synthesized using thiourea as a precursor, and then used to catalyze the degradation of oxytetracycline (OTC) under visible‐light irradiation. OTC was chosen as target contaminant because of it being an important precursor of N ‐nitrosodimethylamine (NDMA). RESULTS The removal of OTC was influenced by its initial concentration, initial pH, SCN dosage and water matrices. OTC (≤10 mg L −1 ) was almost completely removed in 40 min under the conditions of an initial pH of 7.0 and a SCN dose of 1.0 g L −1 , and its degradation was well described by the pseudo‐first‐order kinetics model. Water matrices would also influence the degradation of OTC in the system. Electron paramagnetic resonance analysis and trapping experiments confirmed that the function of the radicals for OTC removal followed the order of • O 2 − > • OH > h + . Eight transformation products were determined during the degradation of OTC, it being removed through four pathways: methyl oxidization, demethylation, decarbonylation and secondary alcohol oxidation. SCN was stable in the system, as the removal efficiency of OTC was not significantly reduced even after three recycles. In addition, 55.5% of NDMA formation potential of OTC was reduced after SCN catalytic oxidation. CONCLUSIONS The results imply that the visible‐light‐driven SCN catalytic oxidation is an effective technology not only for the removal of OTC but also for the reduction of NDMA formation potential. © 2021 Society of Chemical Industry

Dou, Yicheng↗

UV + Damp Heat Induced Power Losses in Fielded Utility N-Type Si PV Modules

A recent trend in commercial PV modules is a transition to n-type silicon cells, including passivated emitter rear totally diffused (n-PERT), tunnel oxide passivated contact (TOPCon), and silicon heterojunction (SHJ). There is evidence via lab studies that some of these cells are more susceptible to UV induced degradation (UVID), yet there is a lack of confirmation that such degradation occurs in the field. Current IEC standards designed to screen for early module failures require only minimal UV exposure (15 kWh/m2 280-400 nm, ~2-3 months equivalent outdoor exposure). Here, we investigate fielded n-PERT silicon (Si) modules from a commercial utility that show power losses of ~2%/year. We present a comprehensive picture of the physics and chemistry of degradation supported by both module and cell electronic characterization (EL, PL, IV, EQE, and DLIT) and materials-level morphological and chemical analysis (SEM, EDS, XPS, FTIR, and HPLC). All sampled site modules show short circuit current (Isc) and open circuit voltage (Voc) losses when compared to unfielded spares, with the most severely degraded also having losses in fill factor (FF). We identify two different degradation modes contributing to overall power loss: (1) external quantum efficiency (EQE) measurements show losses in the blue range of the spectra, indicative of cell surface recombination losses, and (2) variations in high series resistance (Rs) at the cell level that are correlated with compositional differences in cell metallization. Using unfielded spares, we were able to reproduce Voc, Isc, and EQE losses via a minimum UV stress of 67.5 kWh/m2 (280-400 nm), 4.5x the exposure currently required in IEC 61215-2 (MQT 10). Degradation continued with additional UV dosage equivalent to the fielded modules (405 kWh/m2 total), with power loss leveling out at an average of 6.1%. Subsequent 1000 h of 85% RH/85degrees C damp heat testing showed that cells exposed to UV underwent additional severe series resistance degradation, even those without the susceptible paste composition seen in the field, whereas non-UV exposed cells saw little change. We attribute this to higher concentrations of acetic acid generated on the UV exposed area of the module, leading to degradation of the gridline/cell interface and high Rs. This study is unique in that it reproduces field observed utility scale UVID with an accelerated test and supports the need for standards development for longer UV exposure combined with other stress factors to catch materials interplay within a module package.

14 SOLAR ENERGY↗

A phosphorylation-deficient ribosomal protein eS6 is largely functional in Arabidopsis thaliana , rescuing mutant defects from global translation and gene expression to photosynthesis and growth

The eukaryote-specific ribosomal protein of the small subunit eS6 is phosphorylated through the target of rapamycin (TOR) kinase pathway. Although this phosphorylation event responds dynamically to environmental conditions and has been studied for over 50 years, its biochemical and physiological significance remains controversial and poorly understood. Here, we report data from Arabidopsis thaliana, which indicate that plants expressing only a phospho-deficient isoform of eS6 grow essentially normally under laboratory conditions. The eS6z (RPS6A) paralog of eS6 functionally rescued a double mutant in both rps6a and rps6b genes when expressed at approximately twice the wild-type dosage. A mutant isoform of eS6z lacking the major six phosphorylatable serine and threonine residues in its carboxyl-terminal tail also rescued the lethality, rosette growth, and polyribosome loading of the double mutant. This isoform also complemented many mutant phenotypes of rps6 that were newly characterized here, including photosynthetic efficiency, and most of the gene expression defects that were measured by transcriptomics and proteomics. However, compared with plants rescued with a phospho-enabled version of eS6z, the phospho-deficient seedlings retained a mild pointed-leaf phenotype, root growth was reduced, and certain cell cycle-related mRNAs and ribosome biogenesis proteins were misexpressed. The residual defects of the phospho-deficient seedlings could be understood as an incomplete rescue of the rps6 mutant defects. There was little or no evidence for gain-of-function defects. As previously published, the phospho-deficient eS6z also rescued the rps6a and rps6b single mutants; however, phosphorylation of the eS6y (RPS6B) paralog remained lower than predicted, further underscoring that plants can tolerate phospho-deficiency of eS6 well. Our data also yield new insights into how plants cope with mutations in essential, duplicated ribosomal protein isoforms.

60 APPLIED LIFE SCIENCES↗

The structure-activity relationship in herbicidal monosubstituted sulfonylureas

The herbicide sulfonylurea (SU) belongs to one of the most important class of herbicides worldwide. It is well known for its ecofriendly, extreme low toxicity towards mammals and ultralow dosage application. The original inventor, G Levitt, set out structure-activity relationship (SAR) guidelines for SU structural design to attain superhigh bioactivity. A new approach to SU molecular design has been developed. After the analysis of scores of SU products by X-ray diffraction methodology and after greenhouse herbicidal screening of 900 novel SU structures synthesized in the authors laboratory, it was found that several SU structures containing a monosubstituted pyrimidine moiety retain excellent herbicidal characteristics, which has led to partial revision of the Levitt guidelines. Among the novel SU molecules, monosulfuron and monosulfuron-ester have been developed into two new herbicides that have been officially approved for field application and applied in millet and wheat fields in China. A systematic structural study of the new substrate-target complex and the relative mode of action in comparison with conventional SU has been carried out. A new mode of action has been postulated.

54 ENVIRONMENTAL SCIENCES↗

Large Photothermal Effect in Sub-40 nm h-BN Nanostructures Patterned Via High-Resolution Ion Beam

The controlled nanoscale patterning of 2D materials is a promising approach for engineering the optoelectronic, thermal, and mechanical properties of these materials to achieve novel functionalities and devices. Herein, high-resolution patterning of hexagonal boron nitride (h-BN) is demonstrated via both helium and neon ion beams and an optimal dosage range for both ions that serve as a baseline for insulating 2D materials is identified. Through this nanofabrication approach, a grating with a 35 nm pitch, individual structure sizes down to 20 nm, and additional nanostructures created by patterning crystal step edges are demonstrated. Raman spectroscopy is used to study the defects induced by the ion beam patterning and is correlated to scanning probe microscopy. Photothermal and scanning near-field optical microscopy measure the resulting near-field absorption and scattering of the nanostructures. These measurements reveal a large photothermal expansion of nanostructured h-BN that is dependent on the height to width aspect ratio of the nanostructures. This effect is attributed to the large anisotropy of the thermal expansion coefficients of h-BN and the nanostructuring implemented. Finally, the photothermal expansion should be present in other van der Waals materials with large anisotropy and can lead to applications such as nanomechanical switches driven by light.

2D materials↗

Genome‐wide association study of multiple yield traits in a diversity panel of polyploid sugarcane ( Saccharum spp.)

Abstract Sugarcane ( Saccharum spp.) is an important economic crop, contributing up to 80% of sugar and approximately 60% of biofuel globally. To meet the increased demand for sugar and biofuel supplies, it is critical to breed sugarcane cultivars with robust performance in yield traits. Therefore, dissection of causal DNA sequence variants is of great importance, as it provides genetic resources and fundamental information for crop improvement. In this study, we analyzed nine yield traits in a sugarcane diversity panel consisting of 308 accessions primarily selected from the World Collection of Sugarcane and Related Grasses. By genotyping the diversity panel via target enrichment sequencing, we identified a large number of sequence variants. Genome‐wide association studies between the markers and traits were conducted, taking dosages and gene actions into consideration. In total, 217 nonredundant markers and 225 candidate genes were identified to be significantly associated with the yield traits, which can serve as a comprehensive genetic resource database for future gene identification, characterization, and selection for sugarcane improvement. We further investigated runs of homozygosity (ROH) in the sugarcane diversity panel. We characterized 282 ROHs and found that the occurrence of ROHs in the genome were nonrandom and probably under selection. The ROHs were associated with total weight and dry weight, and high ROHs resulted in a decrease in the two traits. This study suggests that genomic inbreeding has led to negative impacts on sugarcane yield.

Yang, Xiping↗

Evaluation of Rhodamine B as a biomarker for assessing bait acceptance in wild pigs

ABSTRACT Worldwide, there is growing interest in the use of pharmaceutical baits to control populations of wild pigs ( Sus scrofa ). In this study we evaluated the utility of Rhodamine B (RB), a chemical marker commonly used in wildlife research and management, as a potential biomarker for quantifying bait uptake in wild pigs. Thirty wild pigs were live‐trapped, transported to a captive facility on the Department of Energy's Savannah River Site located in South Carolina, USA, during autumn 2013, and administered RB orally at a dosage of 30 mg/kg. Eight vibrissae and guard hairs were collected pre‐ and post‐RB exposure (7 or 14 days) and evaluated for the presence of RB using fluorescence microscopy. No evidence of RB marking was observed in any samples collected pre‐RB administration. In contrast, we observed fluorescent marking post‐RB exposure that was indicative of the presence of RB for all individuals, with 98% of vibrissae and 100% of guard hairs exhibiting RB marks. The uniform detection of RB among individuals and consistent manifestation of marks in both guard hair and vibrissae, samples that easily can be collected and stored by untrained field personnel from live or deceased pigs, suggests that RB is an effective biomarker for use in large‐scale management programs to control wild pigs. In particular, our results, combined with previous studies evaluating uptake of RB in other species, suggest that RB can be used to develop baiting programs to deliver pharmaceuticals to free‐ranging wild pigs, as well as evaluate the potential impacts of pig baits on non‐target species. © 2014 The Wildlife Society.

Beasley, James↗

Characterization of Mammalian In Vivo Enhancers Using Mouse Transgenesis and CRISPR Genome Editing [Book Chapter]

Embryonic morphogenesis is strictly dependent on tight spatiotemporal control of developmental gene expression, which is typically achieved through the concerted activity of multiple enhancers driving cell type-specific expression of a target gene. Mammalian genomes are organized in topologically associated domains, providing a preferred environment and framework for interactions between transcriptional enhancers and gene promoters. While epigenomic profiling and three-dimensional chromatin conformation capture have significantly increased the accuracy of identifying enhancers, assessment of subregional enhancer activities via transgenic reporter assays in mice remains the gold standard for assigning enhancer activity in vivo. Once this activity is defined, the ideal method to explore the functional necessity of a transcriptional enhancer and its contribution to target gene dosage and morphological or physiological processes is deletion of the enhancer sequence from the mouse genome. Here we present detailed protocols for efficient introduction of enhancer-reporter transgenes and CRISPR-mediated genomic deletions into the mouse genome, including a step-by-step guide for pronuclear microinjection of fertilized mouse eggs. We provide instructions for the assembly and genomic integration of enhancer-reporter cassettes that have been used for validation of thousands of putative enhancer sequences accessible through the VISTA enhancer browser, including a recently published method for robust site-directed transgenesis at the H11 safe-harbor locus. Together, these methods enable rapid and large-scale assessment of enhancer activities and sequence variants in mice, which is essential to understand mammalian genome function and genetic diseases.

cis-regulatory elements↗

Dispersal and fallout simulations for urban consequences management (u)

Hazardous chemical, biological, or radioactive releases from leaks, spills, fires, or blasts, may occur (intentionally or accidentally) in urban environments during warfare or as part of terrorist attacks on military bases or other facilities. The associated contaminant dispersion is complex and semi-chaotic. Urban predictive simulation capabilities can have direct impact in many threat-reduction areas of interest, including, urban sensor placement and threat analysis, contaminant transport (CT) effects on surrounding civilian population (dosages, evacuation, shelter-in-place), education and training of rescue teams and services. Detailed simulations for the various processes involved are in principle possible, but generally not fast. Predicting urban airflow accompanied by CT presents extremely challenging requirements. Crucial technical issues include, simulating turbulent fluid and particulate transport, initial and boundary condition modeling incorporating a consistent stratified urban boundary layer with realistic wind fluctuations, and post-processing of the simulation results for practical consequences management. Relevant fluid dynamic processes to be simulated include, detailed energetic and contaminant sources, complex building vortex shedding and flows in recirculation zones, and modeling of particle distributions, including particulate fallout, as well as deposition, re-suspension and evaporation. Other issues include, modeling building damage effects due to eventual blasts, addressing appropriate regional and atmospheric data reduction.

54 ENVIRONMENTAL SCIENCES↗

Synthesis and antitumor activity evaluation of different 2,5-dialkyloxazolopyrano[3,2-c]quinolinone derivatives

A new interesting family of 2,5-dialkyloxazolopyrano[3,2-c]quinolinone derivatives 4a-l were synthesized in good yields using a convenient and successful method. Structures of all compounds were achieved by elemental analyses, IR, {sup 1}H NMR, {sup 13}C NMR, and mass techniques. The tetracyclic homologues 4a-l were evaluated for antitumor activity and cytotoxicity against a board of three human cancer cell lines (HepG-2, MCF-7, and HCT-116). The cells were treated with these compounds at differentiable dosages, and cell viability was determined. Significant anticancer activities were observed in vitro for some members of the series related to 5-fluorouracil and compounds 4c and 4f showed potent cytotoxic effect, that creates these compounds were disclosed as the most applicable anticancer agents against different cancer cell lines.

60 APPLIED LIFE SCIENCES↗