Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

LDRD conclusion poster - Synthesizing Heterometallic Uranium Single Crystals to Understand the Influence of the Secondary Metals on Uranyl Axial Bond Strength

Understanding how transition metals influenced the chemistry of lanthanide and actinide (f-element) materials is critical for advancing separation technologies, materials design, and coordination chemistry. This project examined how incorporating first-row transition metals affected the structural and spectroscopic properties of f-element coordination polymers. In uranium(VI)-based systems synthesized with 2,6-pyridinedicarboxylic acid (PDC) ligands, single-crystal X-ray diffraction and Raman spectroscopy revealed that the presence of transition metals shortened the uranyl axial bond and induced a blue shift in its symmetric stretching vibration—evidence of increased bond strength. Electronic structure analysis, including Density of States (DOS) calculations using density functional theory (DFT), revealed altered orbital overlaps and highlighted the role of transition metal d-orbitals in modulating bonding. Raman modes were modeled using truncated structural fragments in collaboration with the University of Notre Dame, and although the predicted frequencies were lower than experimental values, they remained within expected ranges. In parallel, similar experiments with cerium (Ce) in the presence of cobalt (Co) and PDC demonstrated multi-step single-crystal-to-single-crystal transformations—behavior not observed in the uranium systems. Initial products included light yellow, orange, and polycrystalline materials. Single-crystal X-ray diffraction studies, conducted in collaboration with the Colorado School of Mines, identified the yellow phase as monometallic Ce(PDC)2(H2O)2·4H2O and the orange phase as heterometallic Ce2Co(PDC)4(H2O)6. After standing in solution for one week, both phases fully transformed into a dark yellow crystalline phase, [Ce3(PDC)5(H2O)8].6(H2O). Remarkably, this transformation was reversible—disturbing the equilibrium by removing some crystals caused reversion to the initial Ce(PDC)2(H2O)2·4H2O phase, highlighting dynamic behavior. All three structures were previously unreported. Solid-state UV-visible and Raman spectroscopy further distinguished these phases, revealing ligand-to-metal charge transfer involving Ce and characteristic d–d transitions from Co(II). The precise mechanism driving these transformations remained unclear; however, pH-dependent experiments confirmed that the transformation did not occur when the pH decreased. Overall, the project demonstrated that transition metals could be employed to tune bonding interactions, structural dimensionality, and optical properties in f-element materials, establishing new pathways for designing functional heterometallic systems. The work resulted in several novel structural discoveries and fostered productive collaborations with the University of Notre Dame and the Colorado School of Mines.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2021

Understanding implications of cathode architecture on energy density of solid-state batteries

Next generation solid-state batteries (SSB) will need to leverage high voltage cathodes, as well as metallic anodes to achieve the realistic performance targets necessary to replace liquid electrolyte-based batteries in cutting-edge applications including electric vehicles. However, limitations arising from mass and charge transports, kinetics and chemo-mechanical degradation at the electrode | electrolyte interface limit the performance of present day SSBs. Optimizing composite cathode architecture, which is an integral part of solid-state batteries, is vital to realize the high-energy density and high-performance goals for next-generation solid-state batteries. Additionally, cathode architecture needs to be optimized for high loadings of active material, well-percolated ion and electron transport pathways and increased resilience against electrochemical stresses. This paper provides a first report of framework for geometric modeling of composite cathode architectures and evaluates the impact of cathode architecture on cell-level energy density using hierarchical models. Packing around primary and secondary active material particles are simulated for a range of active material particle size and solid electrolyte size distributions in the composite cathode. Impact of packing architecture on processing parameters of a given cathode composition and thickness, as well as on achievable energy density is evaluated for a range of commonly used solid electrolyte and cathode materials. Overall, the proposed framework offers a facile exploratory methodology for establishing initial metrics for scalable processing of practical and competent SSBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Native defects in antiferromagnetic topological insulator MnBi 2 Te 4

Using scanning tunneling microscopy and spectroscopy, in this study we visualized the native defects in antiferromagnetic topological insulator MnBi 2 Te 4 . Two native defects, Mn Bi and Bi Te antisites, can be well resolved in the topographic images. Mn Bi tend to suppress the density of states at the conduction band edge. Spectroscopy imaging reveals a localized peaklike local density of state at ~ 80 meV below the Fermi energy. A careful inspection of topographic and spectroscopic images, combined with density functional theory calculation, suggests this results from Bi Mn antisites at Mn sites. The random distribution of Mn Bi and Bi Mn antisites results in spatial fluctuation of local density of states near the Fermi level in MnBi 2 Te 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reactivity of Sulfur Vacancy-Rich MoS 2 to Water Dissociation

Exposed Mo atoms on the surface of MoS 2 can catalyze certain useful chemical reactions, including the dissociation of water to produce hydrogen. However, a comprehensive understanding of water reactivity on defective MoS 2 surfaces remains elusive. Here, we use in situ near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to investigate water dissociation reactions on MoS 2 surfaces before and after Ar + ion beam bombardment. To make the surfaces reactive, we treated them with Ar + ion beam sputtering first, which created exposed Mo sites. Using ultraviolet photoelectron spectroscopy (UPS) and density of states calculations conducted using density functional theory (DFT), we verified that stripping the surface of sulfur atoms creates metallic surface states that can catalyze water dissociation. At elevated H 2 O pressures, XPS measurements combined with DFT calculations suggested the presence of four distinct surface species from dissociated water. Specifically, we found that oxides and hydroxides are prominent at the surface, while chemisorbed and physisorbed H 2 O molecules are also present. In conclusion, this study provides new insights that reveal the prospects of surface-engineered MoS 2 as a catalyst for water dissociation.

08 HYDROGEN↗
DOE OSTI2026

Atomic Manipulation of Single Erbium on GaAs(110): From Adatom Motion to Creation and Control of Bistable Substitutions

We demonstrate atomic-scale control over the position and configuration of single erbium (Er) atoms at the GaAs(110) surface using scanning tunneling microscopy (STM). By applying voltage pulses from the STM tip, we drive Er adatoms to move sequentially among three distinct adsorption sites and controllably substitute into Ga lattice sites. The resulting substitutional Er atoms exhibit two isoelectronic configurations that differ by less than one angstrom in lateral position and can be reversibly switched by additional voltage pulses. Differential conductance spectroscopy shows differences in the unoccupied local electronic states for the two substitutional configurations, and an absence of mid-gap states. Preliminary density functional theory (DFT) calculations support these findings, identifying the most stable adsorption and substitutional sites, their relative binding energies, charge states, and local density of states (LDOS) characteristics. Together, the experimental and theoretical results establish a method for precise, reversible manipulation of rare-earth dopants at semiconductor surfaces, opening a pathway to engineer atomic-scale quantum and optoelectronic functionalities.

Poche, Steven [Ohio State University]↗
DOE OSTI2023

Band Energy Dependence of Defect Formation in the Topological Semimetal Cd3As2

Cadmium Arsenide (Cd3As2) is a prototypical Dirac semimetal that manifests topological properties in a 3D bulk material. In defect-free Cd3As2, the Fermi level lies at a minimum in the density of states at the Dirac point, but experimentally it forms with excess electron carriers and an elevated EF, thereby masking the topological features. To computationally study the self-doping of Cd3As2, we combine density functional theory (DFT) calculations for defect formation energies with quasi-particle self-consistent GW (QSGW) electronic structure calculations. We demonstrate an innate dependence of the point defect formation energies on carrier concentrations and use the QSGW calculated density of states to extrapolate formation energies to arbitrary electron concentrations. This approach allows the quantitative modeling of thermodynamic defect equilibria in topological semimetals and is used to predict how Cd3As2 growth conditions affect the position of EF relative to the Dirac point.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2023

Physics-Informed Machine-Learning Prediction of Curie Temperatures and Its Promise for Guiding the Discovery of Functional Magnetic Materials

High-performance permanent magnets with a high Curie temperature, containing less critical materials, are integral to zero-carbon energy solutions. We built a machine-learning model trained over available experimentally measured Curie temperature values to predict the T C of multicomponent magnetic materials. We chose two compositions from a pseudo-binary (Zr 1–x Ce x )Fe 2 system, namely, (Zr 0.16 Ce 0.84 )Fe 2 and (Zr 0.94 Ce 0.06 )Fe 2 , to experimentally validate the ability of our model to predict the Curie temperature of novel compounds. We also provided a detailed discussion on the correlation of the Curie temperature with the de Gennes scaling factor in rare-earth intermetallic compounds and its breakdown below a certain rare-earth content. The electronic structure calculations (density of states and Fermi surface) were performed using the density functional theory on selected compounds (Zr 0.16 Ce 0.84 )Fe 2 and (Zr 0.94 Ce 0.06 )Fe 2 to understand the electronic origin of a strong magnetic exchange. We found that the change in the electronic density of states and electron/hole fillings at the Fermi level directly correlate with the Curie temperature. Notably, our model was able to capture these key electronic structure trends, which show that physics-informed machine learning can play a crucial role in designing new high-performance magnets with improved properties for environmentally sustainable applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evolution of Bonding and Magnetism via Changes in Valence Electron Count in CuFe 2– x Co x Ge 2

A series of solid solutions, CuFe 2–x Co x Ge 2 (x = 0, 0.2, 0.4, 0.8, and 1.0), have been synthesized by arc-melting and characterized by powder X-ray and neutron diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All compounds crystallize in the CuFe 2 Ge 2 structure type, which can be considered as a three-dimensional framework built of fused MGe6 octahedra and MGe 5 trigonal bipyramids (M = Fe and Co), with channels filled by rows of Cu atoms. As the Co content (x) increases, the unit cell volume decreases in an anisotropic fashion: the b and c lattice parameters decrease while the a parameter increases. The changes in all the parameters are nearly linear, thus following Vegard’s law. CuFe 2 Ge 2 exhibits two successive antiferromagnetic (AFM) orderings, corresponding to the formation of a commensurate AFM structure, followed by an incommensurate AFM structure observed at lower temperatures. Additionally, as the Co content increases, the AFM ordering temperature (TN) gradually decreases, and only one AFM transition is observed for x ≥ 0.2. The magnetic behavior of unsubstituted CuFe 2 Ge 2 was found to be sensitive to the preparation method. The temperature-dependent zero-field 57 Fe Mössbauer spectra reveal two hyperfine split components that evolve in agreement with the two consecutive AFM orderings observed in magnetic measurements. In contrast, the field-dependent spectra obtained for fields ≥ 2 T reveal a parallel arrangement of the moments associated with the two crystallographically unique metal sites. Electronic band structure calculations and chemical bonding analysis reveal a mix of strong M–M antibonding and non-bonding states at the Fermi level, in support of the overall AFM ordering observed in zero field. The substitution of Co for Fe reduces the population of the M–M antibonding states and the overall density of states at the Fermi level, thus suppressing the T N value.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Excitation and tunneling spectra of a fractional quantum Hall system in the thin-cylinder limit

Here, the excitations of fractional quantum Hall effect (FQHE) states have been largely inaccessible to experimental probes until recently. New electron scanning tunneling microscopy (STM) results from Hu et al. [Nat. Phys. 21, 716 (2025)] show promise in detecting and identifying these excited states via the local density of states (LDOS) spectrum. On a torus, there exists a mapping from the lowest Landau level states to a 1D lattice with a Hamiltonian that features dipole moment conservation. In this work, we apply perturbation theory starting from the thin-cylinder limit (𝐿 𝑥 → ∞, 𝐿 𝑦 < 𝑙 𝐵 for torus dimensions 𝐿 𝑥 and 𝐿 𝑦 and magnetic length 𝑙 𝐵 ) to obtain an analytical approach to the low-lying neutral and charged excitations of the 𝜈 = 1/3 FQHE state. Notably, in the thin cylinder, we can systematically enumerate all the low-lying excitations by the patterns of “dipoles” formed by the electron occupation pattern on the 1D lattice. We find that the thin-cylinder limit predicts a significant dispersion of the low-lying neutral excitations but sharpness of the LDOS spectra, which measure charged excitations. We also discuss connections between our work and several different approaches to the FQHE STM spectra, including those using the composite fermion theory. Numerical exact diagonalization beyond the thin-cylinder limit suggests that the energies of charged excitations remain largely confined to a narrow range of energies, which in experiments might appear as a single peak.

Adhidewata, Jyesta M. [University of California, B↗
DOE OSTI2020

Correlating structural, electronic, and magnetic properties of epitaxial VSe 2 thin films

The electronic and magnetic properties of transition metal dichalcogenides are known to be extremely sensitive to their structure. In this paper we study the effect of structure on the electronic and magnetic properties of mono- and bilayer VSe 2 films grown using molecular beam epitaxy. VSe 2 has recently attracted much attention due to reports of emergent ferromagnetism in the two-dimensional (2D) limit. To understand this compound, high-quality 1$\textit{T}$ and distorted 1$\textit{T}$ films were grown at temperatures of 200 °C and 450 °C, respectively, and studied using 4 K scanning tunneling microscopy and spectroscopy. The measured density of states and the charge density wave (CDW) patterns were compared to band structure and phonon dispersion calculations. Films in the 1$\textit{T}$ phase reveal different CDW patterns in the first layer compared to the second. Interestingly, we find the second layer of the 1$\textit{T}$ film shows a CDW pattern with 4$\textit{a}$ × 4$\textit{a}$ periodicity which is the 2D version of the bulk CDW observed in this compound. We report our phonon dispersion calculations confirm the presence of a soft phonon at the correct wave vector that leads to this CDW. In contrast, the first layer of distorted 1$\textit{T}$ phase films shows a strong stripe feature with varying periodicities, while the second layer displays no observable CDW pattern. Finally, we find that the monolayer 1$\textit{T}$ VSe 2 film is weakly ferromagnetic, with ~3.5 $μ_B$ per unit similar to previous reports.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Structure and lattice excitations of the copper substituted lead oxyapatite Pb 9.06⁢(7)⁢ Cu 0.94⁢(6)⁢ (PO 3.92⁢(4) ) 6 ⁢O 0.96⁢(3)

The copper substituted lead oxyapatite, Pb 10-x⁢ Cu x (PO 3.92⁢(4) ) 6 ⁢O 0.96⁢(3) [x = 0.94(6)] was studied using neutron and x-ray diffraction and neutron spectroscopy techniques. The crystal structure of the main phase of our sample, which has come to be colloquially known as LK-99, is verified to possess a hexagonal structure with space group P6 3 /m, alongside the presence of impurity phases Cu and Cu 2 ⁢S. We determine the primary substitution location of the Cu as the Pb1 (6⁢ℎ) site, with a small substitution at the Pb2 (4⁢f) site. Consequently, no clear Cu-doping-induced structural distortion was observed in the investigated temperature region between 10 K and 300 K. Specially, we did not observe a reduction of coordinate number at the Pb2 site or a clear tilting of PO 4 tetrahedron. Magnetic characterization reveals a diamagnetic signal in the specimen, accompanied by a very weak ferromagnetic component at 2 K. No long-range magnetic order down to 10 K was detected by the neutron diffraction. Inelastic neutron scattering measurements did not show magnetic excitations for energies up to 350 meV. There is no sign of a superconducting resonance in the excitation spectrum of this material. The measured phonon density of states compares well with density functional theory calculations performed for the main LK-99 phase and its impurity phases. Our study may shed some insight into the role of the favored substitution site of copper in the absence of structural distortion and superconductivity in LK-99.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Virasoro minimal string

We introduce a critical string theory in two dimensions and demonstrate that this theory, viewed as two-dimensional quantum gravity on the worldsheet, is equivalent to a double-scaled matrix integral. The worldsheet theory consists of Liouville CFT with central charge c ≥ ≥ 25 coupled to timelike Liouville CFT with central charge 26-c. The double-scaled matrix integral has as its leading density of states the universal Cardy density of primaries in a two-dimensional CFT, thus motivating the name Virasoro minimal string. The duality holds for any value of the continuous parameter c c and reduces to the JT gravity/matrix integral duality in the large central charge limit. It thus provides a precise stringy realization of JT gravity. The main observables of the Virasoro minimal string are quantum analogues of the Weil-Petersson volumes, which are computed as absolutely convergent integrals of worldsheet CFT correlators over the moduli space of Riemann surfaces. By exploiting a relation of the Virasoro minimal string to three-dimensional gravity and intersection theory on the moduli space of Riemann surfaces, we are able to give a direct derivation of the duality. We provide many checks, such as explicit numerical - and in special cases, analytic - integration of string diagrams, the identification of the CFT boundary conditions with asymptotic boundaries of the two-dimensional spacetime, and the matching between the leading non-perturbative corrections of the worldsheet theory and the matrix integral. As a byproduct, we discover natural conformal boundary conditions for timelike Liouville CFT.

Physics↗
DOE OSTI2023

Characterizing Density and Spatial Distribution of Trap States in Ta 3 N 5 Thin Films for Rational Defect Passivation

Tantalum nitride (Ta 3 N 5 ) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta 3 N 5 films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta 3 N 5 . This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 10 22 cm –3 at the interfaces of neat Ta 3 N 5 thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta 3 N 5 thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 10 17 cm –3 . This information, coupled with the present understanding of native oxide layers on Ta 3 N 5 , has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta 3 N 5 thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 10 16 cm –3 . The surface passivation of Ta 3 N 5 films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. Here, this illustrates how developing a deeper understanding of the distribution and influence of defects in Ta 3 N 5 thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta 3 N 5 thin film devices.

defect passivation↗
DOE OSTI2020

Methodology for Generating Covariance Data of Thermal Neutron Scattering Cross Sections

This paper details and implements a framework for evaluating thermal neutron scattering cross sections that provide S(α,β) data and covariance data for hydrogen in light water. This methodology involves perturbing model parameters of molecular dynamics potentials and fitting the simulation results to experimental data. The framework is general and can be applied to any material or simulation method. The fit is made using the Unified Monte Carlo method to experimentally measure double-differential scattering cross sections of light water at the Spallation Neutron Source at Oak Ridge National Laboratory. Mean values and covariance data were generated for model parameters, phonon density of states, double-differential cross sections, and total scattering cross sections. These posterior parameter values were very similar to their prior values with a maximum relative error of 0.54%. This falls within in the Unified Monte Carlo–calculated uncertainties on the order of 2.7%. Additionally, posterior double-differential cross sections agree favorably with ENDF/B-VIII.0 cross sections. The new thermal scattering law was tested by comparing it against benchmarks from the International Criticality Safety Benchmark Evaluation Project Handbook, which showed a slight improvement over the ENDF/B-VIII.0 library. Additionally, the covariance matrix of the phonon density of states was validated to confirm that the spread of k eff from the density of states used to generate the covariance matrix was similar to the spread of k eff from the density of states of the sampled covariance matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

New insights into the electronic structure of α-U and δ-Pu

Here, this work presents the results of a theoretical study of the electronic structure of two actinide metals, α -U and δ -Pu. We compare our ab-initio results obtained with the recently developed self-consistent Vertex corrected GW approach with previously published experimental measurements such as photo-electron spectroscopy, for the occupied density of states, and bremsstralung isochromat spectroscopy (BIS) and inverse photo-electron spectroscopy (IPES), for the unoccupied density of states. Our ab-initio approach includes all important relativistic effects (it is based on Dirac’s equation) and it represents the first application of the Vertex corrected GW approach in the physics of actinides. Overall, our theoretical results are in good agreement with the experimental data, which supports the level of approximations which our theoretical method is based upon. By comparing our vertex corrected GW results with our results obtained with less sophisticated approaches (local density approximation and self-consistent GW) we differentiate the strength of correlation effects in Uranium and Plutonium. Also, our theoretical results allow us to elucidate the subtle differences between the previously published experimental BIS and IPES data on the unoccupied density of states in α -U.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The origin of metallic conductivity in Pt 3 O 4 : a first principles study

The platinum oxide Pt 3 O 4 exhibits metallic conductivity even though it contains square-planar PtO4 units, which in related oxides such as PtO are usually associated with insulating behavior. To identify the electronic origin of this anomalous metallicity, we performed a comprehensive first-principles study using the PBE and r 2 SCAN functionals together with Hubbard U corrections and spin-orbit coupling (SOC). Structural benchmarks show that r 2 SCAN with SOC and a moderate U value (<4 eV) reproduces the experimental lattice constants and formation enthalpy, whereas larger U values (~8 eV) destabilize the cubic structure. Across all functionals and U values considered in this work, Pt 3 O 4 remains metallic. Analyses of the projected density of states, band structures, charge-density isosurfaces, and bonding characteristics demonstrate that the dominant contribution to the metallic character originates from delocalized Pt–O–Pt hybridized antibonding states at the Fermi level. Direct Pt–Pt interactions are present but contribute less strongly to the conductivity. Bader charge analysis reveals only weak Pt charge disproportionation, consistent with mixed Pt II /Pt III character, and a small charge-transfer energy that prevents localization of the Pt 5d electrons even at elevated U. In contrast, PtO develops a Mott or charge-transfer gap under modest U despite having the same PtO 4 coordination environment. These findings demonstrate that persistent Pt–O–Pt covalency is the primary driver of metallicity in Pt 3 O 4 and support the view that this phase can remain conductive under oxygen reduction and oxygen evolution reaction conditions in fuel cell and electrolyzer environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. More nefariously, intensity borrowing by the low-energy charge-transfer states can affect intensities of the valence excitations even if those excitation energies are accurate. At higher excitation energies, it is difficult to distinguish spurious CT states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization scheme that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces the concept of “natural charge-transfer orbitals”, which provide a means to isolate characteristic pairs of orbitals that are most likely to participate in a CTTS excitation. The projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation. We apply this method to analyze an ab initio molecular dynamics (MD) trajectory of I-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with experimental measurements for bulk I-(aq), and only one-third of the water molecules in the I-(H2O)96 simulation cell need to be described with LR-TDDFT in order to obtain excitation energies that are converged to < 0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments

Carter-Fenk, Kevin D.↗
DOE OSTI2026

Deciphering the Conflict Between Ion and Electron Percolating Networks in Solid-State Battery Cathodes

High-energy- and power-density solid state batteries require an optimal cathode composition and microstructural arrangement of cathode active material, solid-state electrolyte, conductive carbon, and binder to simultaneously support lithium-ion transport, electron conduction, and storage capacity. The ion and electron conducting phases in solid-state cathodes counteract each other's percolating networks as their mass ratios increase or decrease relative to each other. Here, we investigate targeted mass ratio variations of argyrodite solid electrolyte and two different types of conductive carbon (particles and fibers) in composite LiNi0.8Mn0.1Co0.1O2 (NMC811) solid-state cathodes to ascertain the ionic-electronic tradeoffs in cathode performance. Through ionic and electronic conductivity measurements on composite cathodes, as well as rate-testing and cycling performance in full cells, it is shown that the conductive carbon fibers form a percolative electronic network within the composite at a lower mass ratio (3-5 wt%) than particulate carbon (>5 wt%). The threshold to achieve electronic percolation coincides with higher accessible capacity in the cathode as the active material particles become electronically connected. However, carbon loadings beyond this percolation threshold lead to increased ion transport resistance, arising from disruptions to ionic conduction pathways and degraded contact at the interface between the electrolyte and active materials. Imaging, spectroscopy, and physics-based models quantitatively describe the relationship between carbon and electrolyte compositions and the cell's capacity and rate performance through percolation theory. This work demonstrates the importance of quantitatively understanding percolating networks in solid-state cells and that strategic engineering of conductive carbon morphologies can further increase the energy- and power-density of solid-state cells.

25 ENERGY STORAGE↗