Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical Reaction Cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Probing the Effects of NO x and SO x Impurities on Oxy-Fuel Combustion in Supercritical CO 2 : Shock Tube Experiments and Chemical Kinetic Modeling

The direct-fired supercritical carbon dioxide cycles are one of the most promising power generation methods in terms of their efficiency and environmental friendliness. Two important challenges in implementing these cycles are the high pressure (300 bar) and high CO 2 dilution (>80%) in the combustor. The design and development of supercritical oxy-combustors for natural gas require accurate reaction kinetic models to predict the combustion outcomes. The presence of a small amount of impurities in natural gas and other feed streams to oxy-combustors makes these predictions even more complex. During oxy-combustion, trace amounts of nitrogen present in the oxidizer is converted to NO x and gets into the combustion chamber along with the recirculated CO 2 . Similarly, natural gas can contain a trace amount of ammonia and sulfurous impurities that get converted to NO x and SO x and get back into the combustion chamber with recirculated CO 2 . In this work, a reaction model is developed for predicting the effect of impurities such as NO x and SO x on supercritical methane combustion. The base mechanism used in this work is GRI Mech 3.0. H 2 S combustion chemistry is obtained from Bongartz et al. while NOx chemistry is from Konnov. The reaction model is then optimized for a pressure range of 30–300 bar using high-pressure shock tube data from the literature. It is then validated with data obtained from the literature for methane combustion, H 2 S oxidation, and NO x effects on ignition delay. The effect of impurities on CH 4 combustion up to 16 atm is validated using NO x -doped methane studies obtained from the literature. In order to validate the model for high-pressure conditions, experiments are conducted at the UCF shock tube facility using natural gas identical mixtures with N 2 O as an impurity at ~100 bar. Current results show that there is a significant change in ignition delay with the presence of impurities. A comparison is made with experimental data using the developed model and predictions are found to be in good agreement. The model developed was used to study the effect of impurities on CO formation from sCO 2 combustors. It was found that NO x helps in reducing CO formation while the presence of H 2 S results in the formation of more CO. The reaction mechanism developed herein can also be used as a base mechanism to develop reduced mechanisms for use in CFD simulations.

Energy & Fuels↗
DOE OSTI2021

Copper Dendrites and Surface Engineering for Enhanced CO2 Reduction Research Report Paper

The electrocatalytic reduction of CO 2 (CO 2 R) into hydrocarbon fuels, such as ethylene and ethanol, provides an attractive pathway towards closing the industrial carbon cycle and producing chemicals using renewable electricity. Existing CO 2 R technologies can exhibit C 2+ product selectivity above 74% and operating current densities over 1.3 A/cm 2 , but none can achieve both simultaneously, limiting the commercial viability and scalability of this technology. Low CO 2 concentrations at the catalyst surface and competing side reactions such as the hydrogen evolution reaction (HER) inhibit C 2+ faradaic efficiencies and operational current densities. Additionally, the use of high surface area cathode geometries to increase operational current densities is under-investigated. In this work, we electrodeposit a macroporous copper dendrite film to form high surface area cathodes. These structures are then coated with a combination of hydrophobic/hydrophilic ionomers to achieve high electrochemically active surface areas (ECSA), form regions of intrinsic porosity, and maximize catalytic availability of CO 2 . Using these techniques, we hope to maximize C 2+ faradaic efficiencies (FE) and geometric partial current densities. The treated cathode compound macrostructure (~10μm-sized pores, and ~μm-long dendrites) and concomitant surface area allows increased geometric current densities while the ionomer coating simultaneously inhibits HER and increases hydrogen availability to improve C 2+ selectivity. Our results show that careful engineering of the catalyst-electrolyte interface can enhance CO 2 reduction product selectivity and efficiency.

10 SYNTHETIC FUELS↗
NASA NTRS1992

CPL Materials Life Cycle Test Facility

The Capillary Pumped Loop (CPL) Materials Life Cycle Test Facility at the Goddard Space Flight Center (GSFC) will identify the operational parameters controlling the performance of a CPL over an extended period of time. The primary purpose of the facility is to investigate the long-term chemical compatibility between the anhydrous ammonia working fluid and the CPL materials of construction. Chemical reactions occurring within the system may produce non-condensable gases or particulate debris that can lead to a degradation in system performance. Small liquid samples will be drawn from the system at specific time intervals and analyzed to check for the presence of non-condensable gases. Periodic maximum and minimum heat load tests will be performed on the CPL to monitor trends in the overall system performance.

Buchko, Matthew T.↗
DOE OSTI2022

Chemical Challenges that the Peroxide Dianion Presents to Rechargeable Lithium–Air Batteries

Understanding the fundamental redox reactions and processes that occur in lithium–air and, more generally, metal–air batteries is important to the progress of this promising energy-storage technology. Knowledge of the chemistry of the peroxide dianion, O 2 2– , is especially crucial, as the dianion is at the nexus of the charge/discharge cycle of lithium–air batteries. The intrinsic electron transfer properties and redox chemistry of peroxide dianion are poorly defined because it is difficult to isolate the dianion free of protons and metal ions. We review the results of (i) the electron transfer kinetics and (ii) the redox reaction chemistry of isolated peroxide dianion encapsulated within the cavity of a hexacarboxamide cryptand. With regard to the former, electron transfer kinetics measurements provide fundamental Marcus parameters that will be useful for models that seek to disentangle the precise contributions of Li + ion-coupled electron transfer, electron transfer across the Li 2 O 2 solid particle interface, and charge hopping among Li 2 O 2 particles. With regard to the latter, an underappreciated chemistry of peroxide dianion with CO 2 produces peroxymonocarbonate (OOCO 2 2– ) and peroxydicarbonate (O 2 COOCO 2 2– ). An autocatalytic cycle will lead to oxidative degradation of traditional organic electrolytes and other vulnerable cell components employed in lithium–air batteries. Furthermore, this peroxycarbonate-derived chemistry, in addition to more commonly recognized solution-based oxidation chemistry, will need to be mitigated to realize the long-term cyclability of rechargeable lithium–air batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

CFD modeling of pre-spark heat release in a boosted direct-injection spark-ignition engine

Accurate predictions of low-temperature heat release (LTHR) are critical for modeling auto-ignition processes in internal combustion engines. While LTHR is typically obscured by deflagration, extremely late ignition phasing can lead to LTHR prior to the spark, a behavior known as pre-spark heat release (PSHR). In this research, PSHR in a boosted direct-injection spark-ignition engine was studied using 3-D computational fluid dynamics (CFD) and detailed chemical kinetics. The turbulent combustion was modeled via a hybrid approach that incorporates the G-equation model for tracking the turbulent flame front, and the well-stirred reactor model with detailed chemistry for assessing the low-temperature reactions in unburnt gas. Simulations were conducted using Co-Optima alkylate and E30 fuels at operating conditions characterized by different PSHR intensities. The predicted in-cylinder pressure and heat release rate were found to agree well with experiments. It was found the estimate of previous-cycle trapped residuals is of utmost importance for capturing PSHR correctly. A simulation best practice was developed which keeps the detailed chemistry solver active throughout the entire simulation, allowing to track the evolution of intermediate species from one cycle to the next. Following the validation, the dynamics of PSHR were analyzed in detail employing the pressure-temperature (P-T) trajectory framework. It was shown that PSHR correlated with the first-stage ignition delay of the fuel, hence showing close relation to the in-cylinder P-T trajectory and the chemical kinetics. Besides, it was indicated that LTHR is a self-limiting process that has the effect of attenuating the thermal stratification in the combustion chamber. Furthermore, it was observed the occurrence of PSHR caused the P-T trajectory of end-gas to overlap with the negative temperature coefficient region of the fuel’s ignition-delay maps. This effect was more significant in the fuel-rich regions where engine knock tendency would be generally higher, with potential implications on knock control and mitigation.

42 ENGINEERING↗
DOE OSTI2023

Long-Term Stability of Ferri-/Ferrocyanide as an Electroactive Component for Redox Flow Battery Applications: On the Origin of Apparent Capacity Fade

We assess the suitability of potassium ferri-/ferrocyanide as an electroactive species for long-term utilization in aqueous organic redox flow batteries. A series of electrochemical and chemical characterization experiments was performed to distinguish between structural decomposition and apparent capacity fade of ferri-/ferrocyanide solutions used in the capacity-limiting side of a flow battery. Our results indicate that, in contrast with previous reports, no structural decomposition of ferri-/ferrocyanide occurs at tested pH values as high as 14 in the dark or in diffuse indoor light. Instead, an apparent capacity fade takes place due to a chemical reduction of ferricyanide to ferrocyanide, via chemical oxygen evolution reaction. We find that this parasitic process can be further exacerbated by carbon electrodes, with apparent capacity fade rates at pH 14 increasing with an increased ratio of carbon electrode surface area to ferricyanide in solution. Based on these results, we report a set of operating conditions that enables the long-duration cycling of alkaline ferri-/ferrocyanide electrolytes and demonstrate how apparent capacity fade rates can be engineered by the initial system setup. If protected from direct exposure to light, the structural stability of ferri-/ferrocyanide anions allows for their practical deployment as electroactive species in long duration energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Red-Ox Robust SOFC Stacks for Affordable, Reliable Distributed Generation Power Systems

While SOFC systems are expected to operate reliably and with limited degradation in steady state or transient performance, SOFC stacks may ultimately fail due to the loss of structural integrity of one or several of the cells as a result of the weakening of the materials and interfaces due to physico-chemical changes that occur during continuous operation as a result of plastic and creep deformations, modification of the temperature profile, and/or degradation of the electrochemical performance of the cells. Degradation mechanisms originating from the cell components include coarsening of the microstructure over time; decomposition of materials; chemical reaction of electrode materials with electrolyte at the interface; delamination from each other; and for the anode, coking and sulfur poisoning. Of all the reliability issues that may occur for SOFCs, the main limitation for Ni-based cermet anodes (e.g., NiO-YSZ) is the poor stability during reduction-oxidation (red-ox) cycling. This project was aimed at the development of ceramic anode SOFCs based on SFCM (SrFe0.2Co0.4Mo0.4O3), which is a conductive perovskite that is red-ox stable. Additionally, the project involved the development of a red-ox robust stack. Scale up of SFCM-based cells to a large format (10 cm by 10 cm) cell size was achieved as well as a maximum power density of 0.9 W/cm 2 at 600 °C (>0.6 W/cm 2 at 0.6 V). Up to a 10-cell stack was successfully assembled and demonstrated, and cells showed similar performance in reformed, pipeline natural gas as in hydrogen. Finally, a 3-cell stack was red-ox cycled without degradation for 40 cycles at ~600 °C.

03 NATURAL GAS↗
NASA NTRS2001

Exobiochemistry

Exobiochemistry is the putative biochemistry of extraterrestrial life. It suggests the possible energy and material bases of extraterrestrial life and could help detect it. The diverse biochemistry of Earth indicates that a wide range of exobiochemistry is possible on other planets. An exobiochemistry will probably use the same energy sources as Earths ecology, light, biological organic material, and more rarely abiotic chemicals. Extraterrestrial life will be based on familiar chemical principles and probably capture, store, and release energy using oxidation-reduction reactions. Extraterrestrial life will give chemical indications of its existence. Key elements will be concentrated, stored, and recycled, altering their availability and isotopic composition. Any significant departure from chemical equilibrium would be good evidence for exobiochemistry, but an integrated system of departures from the expected equilibrium would be better. Exobiochemistry can be expected to include closed biogeochemical cycles of the major life supporting elements and may well show the complex dynamic close-coupled interactions that characterize the terrestrial biosphere. Terrestrial biochemistry provides a basis for generalization and extrapolation but it does not set bounds on exobiochemistry. In exobiochemistry we can expect: 1. closed chemical cycles that recycle materials, nutrients, and catalysts, 2. organisms with complementary metabolisms that cooperate to close the chemical cycles, 3. a high probability of a carbon and water chemistry, but some possibility of a non-carbon or non-water chemistry in extreme environments, and, 4. life similar to bacteria more prevalent than higher plants and animals.

Jones, Harry↗
NASA NTRS1996

Hydrocarbon photochemistry in the upper atmosphere of Jupiter

The hydrocarbon photochemistry in the upper atmosphere of Jupiter is investigated using a one-dimensional, photochemical-diffusive, and diurnally averaged model. The important chemical cycles and pathways among the major species are outlined and a standard model for the North Equatorial Belt region is examined in detail. It is found that several traditionally dominant chemical pathways among the C and C2 species are replaced in importance by cycles involving C-C4 species. The pressure and altitude profiles of mixing ratios for several observable hydrocarbon species are compared with available ultraviolet- and infrared-derived abundances. The results of sensitivity studies on the standard model with respect to variations in eddy diffusion profile, solar flux, atomic hydrogen influx, latitude, temperature, and important chemical reaction rates are presented. Measured and calculated airglow emissions of He at 584 angstroms and H at 1216 angstroms are also used to provide some constraints on the range of model parameters. The relevance of the model results to the upcoming Galileo mission is briefly discussed. The model is subject to considerable improvement; there is a great need for laboratory measurements of basic reaction rates and photodissociation quantum yields, even for such simple species as methylacetylene and allene. Until such laboratory measurements exist there will be considerable uncertainty in the understanding of the C3 and higher hydrocarbons in the atmospheres of the jovian planets.

NASA Discipline Number 52-20↗
NASA NTRS2000

Self-organizing biochemical cycles

I examine the plausibility of theories that postulate the development of complex chemical organization without requiring the replication of genetic polymers such as RNA. One conclusion is that theories that involve the organization of complex, small-molecule metabolic cycles such as the reductive citric acid cycle on mineral surfaces make unreasonable assumptions about the catalytic properties of minerals and the ability of minerals to organize sequences of disparate reactions. Another conclusion is that data in the Beilstein Handbook of Organic Chemistry that have been claimed to support the hypothesis that the reductive citric acid cycle originated as a self-organized cycle can more plausibly be interpreted in a different way.

NASA Discipline Exobiology↗
DOE OSTI2022

Development and performance of INCONEL® alloy 740H® seam-welded piping

INCONEL® alloy 740H® is an age-hardenable nickel-based alloy approved for pressure vessels and piping within ASME Section I, VIII, and B31.1. Currently, the code applies a weld strength reduction factor (WSRF) of 0.7 to the allowable stresses for longitudinal seam welds in the time dependent creep regime. In this work, a full-scale seam weld was successfully produced using typical industrial practices. The component was solution heat-treated and aged after fabrication to improve the performance of the weldment. Tensile, bend, impact, and low-cycle fatigue tests showed the component met all the specification requirements and elevated temperature properties were within base metal expectations with failures predominately in the weld metal. Long-term creep tests, including large samples more representative of the entire weldment, were fabricated and tested to times in excess of 10,000 h at multiple temperatures. Analysis of the creep data supports a WSRF of 0.9 for the solution annealed + aged weldments in contrast to the WSRF of 0.7 currently applied to welded + aged weldments. Metallurgical analysis shows that the solution annealing causes recrystallization of the weld metal and reduces the chemical compositional and microstructural gradients in the weldments resulting in acceptable short-term performance. In long-term creep, evidence for coarsened zones in the weldments due to discontinuous coarsening reactions were identified as the mechanism leading to accelerated creep damage formation in the weld metal and sample failure.

14 SOLAR ENERGY↗
DOE OSTI2020

Definition of Redox Centers in Reactions of Lithium Intercalation in Li 3 RuO 4 Polymorphs

Cathodes based on layered LiMO 2 are the limiting components in the path toward Li-ion batteries with energy densities suitable for electric vehicles. Introducing an over-stoichiometry of Li increases storage capacity beyond a conventional mechanism of formal transition metal redox. However, the role and fate of the oxide ligands in such intriguing additional capacity remain unclear. This reactivity was predicted in Li 3 RuO 4 , making it a valuable model system. For this study, a comprehensive analysis of the redox activity of both Ru and O under different electrochemical conditions was carried out, and the effect of Li/Ru ordering was evaluated. Li 3 RuO 4 displays highly reversible Li intercalation to Li 4 RuO 4 below 2.5 V vs Li + /Li 0 , with conventional reactivity through the formal Ru 5+ -Ru 4+ couple. In turn, it can also undergo anodic Li extraction at 3.9 V, which involves O states to a much greater extent than Ru. This reaction competes with side processes such as electrolyte decomposition and, to a much lesser extent, oxygen loss. Although the associated capacity is reversible, reintercalation unlocks a different, conventional pathway also involving the formal Ru 5+ -Ru 4+ couple despite operating above 2.5 V, leading to chemical hysteresis. This new pathway is both chemically and electrochemically reversible in subsequent cycles. This work exemplifies both the challenge of stabilizing highly depleted O states, even with 4d metals, and the ability of solids to access the same redox couple at two very different potential windows depending on the underlying structural changes. It highlights the importance of properly defining the covalency of oxides when defining charge compensation in view of the design of materials with high capacity for Li storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modulating physicochemical interfaces enables li-rich oxides based ceramic solid-state li batteries under ambient conditions

Li-rich layered oxides exhibit promising potential applications in high-energy-density solid-state lithium metal batteries. Nevertheless, the strong oxidative oxygen species generate at high voltage, which poses great challenges to positive electrode-side interface stability. Herein, a robust in-situ polymerization gel polymer electrolyte with bifunctional additives is designed for interface modification. These additives, include lithium difluoro(oxalate) borate and LiPO 2 F 2 , regulate the Li + chemical environment in gel polymer electrolyte to enhance crosslink density without residual oligomer, which reduce gas generation and suppress contact loss, thus avoiding interfacial impedance divergence. Concurrently, the designed gel polymer electrolyte enables a wide electrochemical stability window (up to 4.7 V) and a high Li + transference number (0.82). Additionally, the additives induced F- and B-rich inorganic cathode-electrolyte interphase inhibits side reactions and oxygen/transition metal loss effectively, stabilizing the chemical interface. The as-constructed Li-rich layered oxides-based ceramic solid-state lithium metal batteries with gel polymer electrolyte interface modification exert a high discharge capacity of 276.5 mAh g -1 at 30 °C without external pressure, delivering a retention of 81.7% after 100 cycles at 25 mA g -1 during 2.0-4.7 V. This work provides a guideline for developing high-voltage solid-state lithium metal batteries via interfacial design.

Hu, Xinchao [Xiamen University (China)]↗
NASA NTRS1980

Comparison of the N2/+/ photochemistry at different phases of the solar cycle

Thermospheric and ionospheric data obtained on 12 orbits throughout 1978 are analyzed using the chemical scheme established during 1974 when the solar EUV intensities were less than half of those encountered in 1978. It is shown that this scheme, with some modification, applies to the more active period. Photoionization of N2 is found to be the major source of N2(+) in the F2 layer, by contrast with the charge exchange reaction of O+(2D) with N2, which was dominant for the lower solar activity. The results confirm the laboratory measurements of the dissociative recombination rate coefficient for N2 with electrons, as well as the theoretically calculated rate coefficient for the quenching of O+(2D) by electrons.

Torr, M. R.↗
DOE OSTI2024

Assessment of Long-Term Degradation of Adsorbents for Direct Air Capture by Ozonolysis

Porous adsorbents are a promising class of materials for the direct air capture of CO 2 (DAC). Practical implementation of adsorption-based DAC requires adsorbents that can be used for thousands of adsorption–desorption cycles without significant degradation. We examined the potential degradation of adsorbents by a mechanism that appears to have not been considered previously, namely, ozonolysis by trace levels of ozone from ambient air. We focused on amine-appended metal–organic frameworks, specifically amine-functionalized Mg 2 (dobpdc), as a representative DAC adsorbent. Estimates based on the number of amine sites in these adsorbents and the ozone concentration in air suggest that degradation by ozone may be relevant over thousands of adsorption–desorption cycles if reactions with adsorbed ozone are fast. We used density functional theory calculations to estimate reaction rates for amine groups and carbon–carbon double bonds in amine-functionalized Mg 2 (dobpdc).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Chemical and electrochemical behavior of the Cr(III)/Cr(II) half-cell in the iron-chromium redox energy storage system

The Cr(III) complexes present in the acidified chromium solutions used in the iron-chromium redox energy storage system have been isolated and identified as Cr(H2O)6(3+) and Cr(H2O)5Cl(2+) by ion-exchange chromatography and visible spectrophotometry. The cell reactions during charge-discharge cycles have been followed by means of visible spectrophotometry. The spectral bands were resolved into component peaks and concentrations of the Cr(III) species calculated using Beer's law. During the charge mode, Cr(H2O)5Cl(2+) is reduced to Cr(H2O)5Cl(+), and during the discharge mode Cr(H2O)5Cl(+) is oxidized back to Cr(H2O)5Cl(2+). Electrode potential measurements also support this interpretation. Hysteresis effects in the charge-discharge curves can be explained by the slow attainment of equilibrium between Cr(H2O)6(3+) and Cr(H2O)5Cl(2+).

Johnson, D. A.↗
DOE OSTI2023

Particle Size Optimization of Thermochemical Salt Hydrates for High Energy Density Thermal Storage

Thermal energy storage (TES) solutions offer opportunities to reduce energy consumption, greenhouse gas emissions, and cost. Specifically, they can help reduce the peak load and address the intermittency of renewable energy sources by time shifting the load, which are critical toward zero energy buildings. Thermochemical materials (TCMs) as a class of TES undergo a solid–gas reversible chemical reaction with water vapor to store and release energy with high storage capacities (600 kWh m −3 ) and negligible self‐discharge that makes them uniquely suited as compact, stand‐alone units for daily or seasonal storage. However, TCMs suffer from instabilities at the material (salt particles) and reactor level (packed beds of salt), resulting in poor multi‐cycle efficiency and high‐levelized cost of storage. In this study, a model is developed to predict the pulverization limit or R crit of various salt hydrates during thermal cycling. This is critical as it provides design rules to make mechanically stable TCM composites as well as enables the use of more energy‐efficient manufacturing process (solid‐state mixing) to make the composites. The model is experimentally validated on multiple TCM salt hydrates with different water content, and effect of R crit on hydration and dehydration kinetics is also investigated.

25 ENERGY STORAGE↗