Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charge transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Interfacial charge transfer enhancement via formation of binary molecular assemblies on electronically corrugated boron nitride

Using scanning tunneling microscopy/spectroscopy (STM/STS) in conjunction with finite element simulation, we investigate the interfacial behaviors in single-component zinc phthalocyanine (ZnPc) and hexadecafluorinated zinc phthalocyanine (F 16 ZnPc) molecular overlayers as well as their 1 : 1 mixedphase superstructures on h-BN/Cu(111). We show herein that the formation of the binary molecular superstructure drastically increases the charge transfer between F 16 ZnPc molecules and the substrate, which is attributed to the greater electrostatic stability of the binary assembly compared to that of the pure phase. This study highlights the significant complication in the design of donor–acceptor molecular thin films as the presence of the substrate, even a weakly interacting one, such as h-BN/metal, can still perturb the intermolecular charge transfer and thereby the physical behaviors of the hybrid system via interfacial processes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct momentum imaging of charge transfer following site-selective ionization

We study ultrafast charge rearrangement in dissociating 2-iodopropane (2-C 3 H 7 I) using site-selective core-ionization at the iodine atom. Clear signatures of electron transfer between the neutral propyl fragment and multiply charged iodine ions are observed in the recorded delay-dependent ion momentum distributions. The detected charge transfer pathway is only favorable within a small (few angstrom), charge-state-dependent spatial window located at C-I distances longer than that of the neutral ground-state molecule. Lastly, these results offer new insights into the physics underpinning charge transfer in isolated molecules and pave the way for a new class of time-resolved studies.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Luminescent Zr Complexes with Long-lived Intraligand Charge Transfer Excited States

Understanding and establishing design principles to tune the excited states of earth-abundant sensitizers is crucial for identifying new photosensitizers for sustainable technological advancements. Here, we report a series of three bis Zr (IV) complexes of tridentate, dianionic ligands incorporating two phenoxide donors and aza arene acceptors of increasing electron affinity (pyridine < pyrimidine < pyrazine ) that are air and water-stable. These complexes emit via thermally assisted delayed fluorescence from an intraligand charge transfer excited state with varying metal contributions. The electronic structural changes from different acceptors vary the excited state character and the photophysical properties significantly between the complexes. The variation in photophysics that includes emission lifetime (76 μs to 265 ns), intersystem crossing (ISC) lifetime ( 390 – 290 ps), and the energy difference between the singlet and triplet excited states (∆EST. 170 -100 meV). We observe solvent-independent ISC rates when the excited state has metal contributions (acceptor = pyridine), and the ISC rates vary significantly with solvent polarity when the excited state is an intra-ligand charge transfer state (acceptor = pyrimidine and pyrazine). Transient absorption measurements provided the basis spectra and verified the metal contribution in the excited state. This work provides a basis for developing new sensitizers based on Zr (IV) by providing design principles that can be used to modulate the character of the excited state and its photophysics.

Nattikallungal, Thabassum A. [University of Southe↗
NASA NTRS1990

Charge transfer efficiency measurements at low signal levels on STIS/SOHO TK1024 CCD's

Charge transfer efficiency (CTE) test methods are reviewed, and the results and conclusions of the tests are given. The test methods have been utilized to describe the CTE characteristics of the Tektronix 1024 by 1024 CCD to optimize low dark current, low readout noise, and high CTE at low signal levels. CTE modelling is described, and three test methods are set forth and compared. The Fe-55 X-ray response method utilizes the response of a CCD to X-ray photons from the radioactive source Fe-55. The extended pixel edge response method employs the measurement of the charge lost to successive pixels by a known initial signal as it is shifted through the array. The charge injection method consists of charge injection through the output amplifier reset transistor. These measurements were performed on several devices with known CTEs. The CTEs are found to be in agreement for the three methods, making application and test requirements the principal criteria for their use.

Orbock, J. D.↗
DOE OSTI2025

Fast methods for multisite charge transfer processes. I. Constrained, state averaged CASSCF(1,n) and CASSCF(2n − 1,n) simulations

We design a dynamically weighted state-averaged constrained complete active space self-consistent field (DW-SA-cCASSCF) algorithm to treat electrons or holes moving between n molecular fragments (where n can be larger than 2). Within such a so-called eDSCn/hDSCn approach, we consider configurations that are mutually single excitations of each other, and we apply a generalized set of constraints to tailor the method for studying charge transfer problems. The constrained optimization problem is efficiently solved using a DIIS-SQP algorithm, thus maintaining computational efficiency. We demonstrate the method for a finite Su–Schrieffer–Heeger chain, successfully reproducing the expected exponential decay of diabatic couplings with distance. When combined with a gradient, the current extension immediately enables efficient nonadiabatic dynamics simulations of complex multi-state charge transfer processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Interfacial charge-transfer Mott state in iridate–nickelate superlattices

We investigate S r I r O 3 / L a N i O 3 superlattices in which we observe a full electron transfer at the interface from Ir to Ni, triggering a massive structural and electronic reconstruction. Through experimental characterization and first-principles calculations, we determine that a large crystal field splitting from the distorted interfacial I r O 6 octahedra surprisingly dominates over the spin–orbit coupling and together with the Hund’s coupling results in the high-spin (S = 1) configurations on both the Ir and Ni sites. Lastly, this demonstrates the power of interfacial charge transfer in coupling lattice, charge, orbital, and spin degrees of freedom, opening fresh avenues of investigation of quantum states in oxide superlattices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Operando Depth-Resolved Measurement of Solvation Entropy, Interfacial Transport, and Charge-Transfer Kinetics in Lithium-Ion Batteries

Understanding and improving the performance and longevity of lithium-ion batteries critically depends on insight into the dynamic processes occurring at buried electrode-electrolyte interfaces. However, direct, depth-resolved, and operando diagnosis of these interfaces remains a longstanding challenge due to their inaccessibility beneath bulk materials, the limitations of conventional surface- and bulk-sensitive characterization tools, and the difficulty of maintaining realistic cell environments during measurement. These challenges have made it nearly impossible to uniquely resolve important interfacial properties such as charge transfer resistance, SEI (solid electrolyte interphase) resistance, and solvation entropy at the individual electrode interfaces within a working cell, information that is essential for mechanistic insight and accelerated battery design. Here, in this study, we report the development of multiharmonic electro-thermal spectroscopy (METS), an operando technique that enables depth-resolved measurement of solvation entropy, interfacial transport resistance, charge-transfer resistance, and SEI resistance at individual electrode-electrolyte interfaces within practical lithium-ion batteries. By leveraging frequency-dependent, thermal-wave sensing and interface-specific modeling, METS uniquely attributes interfacial properties to specific electrodes, as validated by comparison with traditional electrochemical impedance spectroscopy (EIS). The ability to spatially and temporally resolve interfacial processes in real time provides new diagnostic capabilities that are crucial for mechanistic studies of battery degradation and for the rapid development of next-generation energy storage systems.

Chalise, Divya [University of California, Berkeley↗
DOE OSTI2021

Failure of molecular dynamics to provide appropriate structures for quantum mechanical description of the aqueous chloride ion charge-transfer-to-solvent ultraviolet spectrum

The lowest band in the charge-transfer-to-solvent ultraviolet absorption spectrum of aqueous chloride ion is studied by experiment and computation. Interestingly, the experiments indicate that at concentrations up to at least 0.25 M, where calculations indicate ion pairing to be significant, there is no notable effect of ionic strength on the spectrum. The experimental spectra are fitted to aid comparison with computations. Classical molecular dynamic simulations are carried out on dilute aqueous Cl - , Na + , and NaCl, producing radial distribution functions in reasonable agreement with experiment and, for NaCl, clear evidence of ion pairing. Clusters are extracted from the simulations for quantum mechanical excited state calculations. Accurate ab initio coupled-cluster benchmark calculations on a small number of representative clusters are carried out and used to identify and validate an efficient protocol based on time-dependent density functional theory. The latter is used to carry out quantum mechanical calculations on thousands of clusters. The resulting computed spectrum is in excellent agreement with experiment for the peak position, with little influence from ion pairing, but is in qualitative disagreement on the width, being only about half as wide. It is concluded that simulation by classical molecular dynamics fails to provide an adequate variety of structures to explain the experimental CTTS spectrum of aqueous Cl - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Doped NiO: The mottness of a charge transfer insulator

The evolution of the electronic structures of strongly correlated insulators with doping has long been a central fundamental question in condensed matter physics; it is also of great practical relevance for applications. We have studied the evolution of NiO under hole and electron doping at low doping levels such that the system remains insulating using high-quality thin film and a wide range of experimental and theoretical methods. The evolution is in both cases very smooth with dopant concentration. The band gap is asymmetric under electron and hole doping, consistent with a charge-transfer insulator picture, and is reduced faster under hole doping than under electron doping. For both electron and hole doping, occupied states are introduced at the top of the valence band. The formation of deep donor levels under electron doping and the inability to pin otherwise empty states near the conduction-band edge are indicative that local electron addition and removal energies are dominated by a Mott-like Hubbard U interaction even though the global band gap is predominantly a charge-transfer-type gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C

Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.

Bian, Wenjuan↗
DOE OSTI2021

Charge Transfer and Spin Dynamics in a Zinc Porphyrin Donor Covalently Linked to One or Two Naphthalenediimide Acceptors

We report quantum coherence effects on charge transfer and spin dynamics in a system having two degenerate electron acceptors are studied using a zinc 5,10,15-tri(n-pentyI)-20-phenylporphyrin (ZnP) electron donor covalently linked to either one or two naphthalene-1,8:4,5-bis(dicarboximide) (NDI) electron acceptors using an anthracene (An) spacer, ZnP-An-NDI (1) and ZnP-An-NDI 2 (2), respectively. Following photoexcitation of 1 and 2 in toluene at 295 K, femtosecond transient absorption spectroscopy shows that the electron transfer (ET) rate constant for 2 is about three times larger than that of 1, which can be accounted for by the statistical nature of incoherent ET as well as the electron couplings for the charge separation reactions. In contrast, the rate constant for charge recombination (CR) of 1 is about 25% faster than that of 2. Using femtosecond transient infrared spectroscopy and theoretical analysis, we find that the electron on NDI 2 ∙- in 2 localizes onto one of the two NDIs prior to CR, thus precluding electronically coherent CR from NDI 2 ∙- . Conversely, CR in both 1 and 2 is spin coherent as indicated by the observation of a resonance in the 3* ZnP yield following CR as a function of applied magnetic field, giving spin-spin exchange interaction energies of 2J = 210 and 236 mT, respectively, where the line width of the resonance for 2 is greater than 1. These data show that while CR is a spin-coherent process, incoherent hopping of the electron between the two NDIs in 2, consistent with the lack of delocalization noted above, results in greater spin decoherence in 2 relative to 1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solar cell contacts: quantifying the impact of interfacial layers on selectivity, recombination, charge transfer, and V oc

Interfacial layers (IFLs) are ubiquitous in solar cells, but their precise impact on carrier transfer rates and the relation of these rates to performance metrics and the concepts of selectivity and recombination is lacking. We report the use of a well-defined interdigitated back-contact (IBC) silicon solar cell to determine the precise role of such IFLs. We characterize the action of the common IFL spiro-OMeTAD by making it a third contact to the IBC cell. This architecture creates three solar cells within a single structure that, with numerical simulation, provide the exchange current densities (i.e., charge transfer rates) for electrons ( J 0n ) and holes ( J 0p ) and the quasi Fermi-level splitting in the absorber, which measures the balance of generation and recombination. Further, we describe the relation of V oc to contact recombination, the asymmetry in electron/hole collection rates at a single contact (contact selectivity), and the asymmetry in collection rates of the same carrier at separate contacts (carrier selectivity). Relative to bare gold, neat spiro-OMeTAD reduces J 0n and J 0p (their geometric mean ( J 0n J 0p ) 0.5 decreases by 10 4 ), decreasing contact recombination. Addition of the common dopant Li-TFSI and air increase J 0p / J 0n by 10 6 with little effect on ( J 0n J 0p ) 0.5 , increasing contact hole selectivity. The significant increase in V oc observed by introducing spiro-OMeTAD/Li-TFSI IFLs into the cells studied, however, is due to an increase in the carrier selectivity rather than the contact selectivity or recombination of the spiro-OMeTAD-modified contact. Operando measurements further show voltage-dependent changes in the J 0 s, demonstrating that spiro-OMeTAD contributes to hysteresis. Broader context : Solar cells operate by photogenerating excess charge carriers in an absorber material and, in competition with recombination, asymmetrically extracting them at so-called carrier-selective contacts, one that ideally collects only electrons and the other, only holes. Particularly in emerging photovoltaics such as perovskites, thin layers of organic semiconductors or related materials are introduced between the absorber and contact to improve power conversion efficiency. In terms of interfacial charge transfer, a prevailing view is that such interfacial layers improve performance by helping block the collection of the undesired carrier, considered a form of recombination. We use a novel platform to study the simultaneous impact of spiro-OMeTAD, a common interfacial layer, on the collection of electrons, the collection of holes, and on the recombination of electrons and holes. We quantitatively demonstrate that spiro-OMeTAD layers indeed passivate the contact toward recombination, but that larger improvements in the open-circuit voltage, a key cell metric, can come not only from this but also from increasing the asymmetry of the collection of electrons in the system. Further, operando measurements show transient changes in the properties of spiro-OMeTAD which suggest that it contributes to hysteresis phenomena commonly observed in perovskite and other solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A high-pressure Raman study of FeTiO 3 ilmenite: Fermi resonance as a manifestation of Fe-Ti charge transfer

In this work, we investigated the 300 K high-pressure behavior of ilmenite using Raman spectroscopy to 54 GPa. Upon compression, we observe a Fermi resonance between the lowest frequency A g symmetry peaks (ν 4 and ν 5 ) between ~ 10 and ~ 30 GPa: bands that involve major components of Ti–O and Fe–O-related displacements, respectively. The peaks’ relative intensities switch at ~ 18 GPa and they also reach their minimum separation at ~ 20 GPa, indicating that their maximum resonance occurs between 18 and 20 GPa. The negative shift of the Ti–O-associated ν 4 vibration under compression is fully consistent with a shift in valence of Ti from 4 + to 3 + under compression. Anomalously small mode shifts of other, more localized vibrations are also consistent with a charge transfer from Fe to Ti under compression. At higher pressures, we have not found definitive evidence for a transition to the perovskite-structure at 300 K, which has been well characterized at high pressures and temperatures. At 40 GPa, we observe an apparent reversible disordering that persists up to our highest pressure. The 300 K mode shifts of the Raman active modes in FeTiO 3 under pressure are notably different from those of other ABO 3 compounds (where A = Mg, Mn and B = Ti, Si); in other ilmenite-structured compounds, the peaks shift at a faster rate and there has not been any observation of Fermi resonance. Thus, iron’s complex electronic structure, and its charge transfer with titanium, appears to play a primary role in the behavior of phonons in FeTiO 3 ilmenite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thickness-Dependent Interlayer Charge Transfer in MoSe 2 /MoS 2 Heterostructures Studied by Femtosecond Transient Absorption Measurements

We report observations of a strong thickness dependence for charge transfer (CT) from MoSe 2 to MoS 2 , as evidenced by transient absorption measurements. By time-resolving CT from MoSe 2 monolayers (1Ls) to MoS 2 flakes of varying thicknesses, including 1L, bilayer (2L), and trilayer (3L), we find that the CT time is several picoseconds in the 1L-MoSe 2 /3L-MoS 2 heterostructure, which is much longer than that of 1L-MoSe 2 /1L-MoS 2 and 1L-MoSe 2 /2L-MoS 2 heterostructures. In addition, the recombination lifetime of the interlayer excitons in the 1L/3L heterostructure is several times longer than that of 1L/1L and 1L/2L heterostructures, reaching 800 ps. Furthermore, we show that a prepulse can reduce the CT time and enhance the interlayer exciton recombination in the 1L/3L heterostructure. Furthermore, these findings illustrate that layer thickness can be an important parameter to control the CT property of van der Waals heterostructures. These experimental results also provide important information for further refining the understanding of the physical mechanisms of CT in van der Waals heterostructures.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Potential curves for Na2/+/ and resonance charge transfer cross sections.

A mode potential method, applied earlier to the positively charged diatomic lithium molecule Li2(+), is used to calculate the six lowest potential energy curves of Na2(+). Charge transfer cross sections are calculated for Li(+) on Li and for Na(+) on Na and found to be in reasonable agreement with experiment.

Bottcher, C.↗