Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Census”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Habitat risk: Use of intertidal flats by foraging red knots (Calidris canutus rufa), ruddy turnstones, (Arenaria interpres), semipalmated sandpipers (Calidris pusilla), and sanderling (Calidris alba) on Delaware Bay beaches

Highlights: • Red Knots and other shorebirds migrate through Delaware Bay each spring. • Shorebirds feed on Horseshoe Crab eggs at the tideline and the intertidal flats. • Red Knots and other shorebirds feed on intertidal flats 57 – 97% of censuses. • Shorebirds used all 5 study beaches; peak numbers varied daily among beaches. • A range of intertidal flats (0–300 m) are essential to provide adequate foraging space. Shorebirds usually forage on intertidal flats that are exposed during low tide, and roost on higher areas when the tidal flats are covered with water. During spring migration on Delaware Bay (New Jersey) shorebirds mainly forage on horseshoe crab (Limulus polyphemus) eggs that are concentrated at the high tide line. However, they also use other habitats for foraging. We examined habitat use of 4 species of shorebirds (with declining populations) at five Delaware Bay beaches to determine their use of the intertidal habitat (2015, 2016). We observed birds in three sections at different distances from the mean high tideline (Calidris canutus rufa), ruddy turnstones (Arenaria interpres), semipalmated sandpipers (Calidris pusilla), and sanderling (Calidris alba) as a function of date, tide cycle, section shorebirds foraged from the mean high tide line, and presence of other shorebird species. Understanding how these species use the intertidal flats is important because these habitats are at risk from coastal development, sea level rise, and decreases in intertidal space, including the possible expansion of intertidal oyster culture. Overall, knots were present in the intertidal on 67% of the surveys, turnstones were present on 86% of the surveys, semipalmated sandpipers were present on 77% of the surveys, and sanderling were present on 86% of the surveys. Use of the intertidal flats varied among beaches. Peak and mean numbers of shorebirds/ decreased in each census section, as distance to mean high tideline increased. In general, shorebirds foraged at the waters’ edge during high tide, and then moved out onto the intertidal flats. The strongest interspecific associations were between red knots and ruddy turnstones, and the lowest associations were between sanderling and semipalmated sandpipers. Variations in numbers of each species in 2016 were mainly explained by the number of other species, section (distance from the mean high tide line), location (one of 5 beaches), and date for all species (and minutes to low tide for sanderling). These data indicate that these 4 species use intertidal flats as they become available, and that the mean number in each newly exposed census section of the flats may be lower than in the previous one, partly as a result of some birds remaining in each previously-exposed section. We discuss the management and regulatory implications of shorebird use of the intertidal flats, which include protection of high quality intertidal for foraging by shorebirds.

54 ENVIRONMENTAL SCIENCES↗

From roads to roofs: How urban and rural mobility influence building energy consumption

In this article, understanding the relationship between travel behavior and building energy use at an urban scale is crucial for developing effective energy management strategies. Mobility patterns significantly impact building occupancy, which in turn affects energy consumption. However, existing methods often focus on individual buildings, whereas geographical influences on energy usage are not adequately examined. This study addresses this gap by using transportation origin-destination (OD) data to estimate building occupancy and energy. The proposed method assigns OD trips from census block groups to the building level, incorporating building, travel survey, and census data to derive building occupancy profiles. This method was applied to urban and rural areas with 4062 buildings in 70 census block groups. We found that the OD-informed occupancy profile exhibits smoother energy consumption patterns compared with that of Department of Energy reference occupancy profiles. Our analysis reveals distinct building energy consumption patterns among groups with long and short commutes, emphasizing the effect of commute times and work schedules on residential energy usage. This framework is useful for practitioners in transportation agencies and utility companies, enabling the estimation of building energy based on mobility patterns. Overall, this study shows the potential of integrating transportation and building energy data to inform cross-sector energy management strategies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Distance to Radiation Facility and Treatment Choice in Early-Stage Breast Cancer

Purpose: Breast-conserving therapy (BCT) is a recommended alternative to mastectomy (MT) for early-stage breast cancer. Limited access to radiation therapy (RT) may result in higher rates of MT. We assessed the association between distance to the nearest RT facility and the use of MT, in a modern cohort of women. Methods and Materials: Women with stage 0-II breast cancer eligible for BCT diagnosed from 2004 to 2010 were identified from the Florida Cancer Data System (FCDS). Distances from patient census tracts to the nearest RT facility census tract were calculated. Multivariate logistic regression was used to identify explanatory variables that influenced MT use. Results: Of the 27,489 eligible women, 32.1% (n=8841) underwent MT, and 67.8% (n=18,648) underwent BCS. Thirty-two percent of patients lived in a census tract that was >5 miles from an RT facility. MT use increased with increasing distance to RT facility (31.1% at ≤5 miles, 33.8% at >5 to <15 miles, 34.9% at 15 to <40 miles, and 51% at ≥40 miles, P<.001). The likelihood was that MT was independently associated with increasing distance to RT facility on multivariate analysis (P<.001). Compared to patients living <5 miles away from an RT facility, patients living 15 to <40 miles away were 1.2 times more likely to be treated with MT (odds ratio [OR]: 1.19, 95% confidence interval [CI]: 1.05-1.35, P<.01), and those living ≥40 miles away were more than twice as likely to be treated with MT (OR: 2.17, 95% CI: 1.48-3.17, P<.001). However, in patients younger than 50 years (n=5179), MT use was not associated with distance to RT facility (P=.235). Conclusions: MT use in a modern cohort of women is independently associated with distance to RT facility. However, for young patients, distance to RT is not a significant explanatory variable for MT use.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

National population mapping from sparse survey data: A hierarchical Bayesian modeling framework to account for uncertainty

Population estimates are critical for government services, development projects, and public health campaigns. Such data are typically obtained through a national population and housing census. However, population estimates can quickly become inaccurate in localized areas, particularly where migration or displacement has occurred. Some conflict-affected and resource-poor countries have not conducted a census in over 10 y. We developed a hierarchical Bayesian model to estimate population numbers in small areas based on enumeration data from sample areas and nationwide information about administrative boundaries, building locations, settlement types, and other factors related to population density. We demonstrated this model by estimating population sizes in every 10- m grid cell in Nigeria with national coverage. These gridded population estimates and areal population totals derived from them are accompanied by estimates of uncertainty based on Bayesian posterior probabilities. The model had an overall error rate of 67 people per hectare (mean of absolute residuals) or 43% (using scaled residuals) for predictions in out-of-sample survey areas (approximately 3 ha each), with increased precision expected for aggregated population totals in larger areas. This statistical approach represents a significant step toward estimating populations at high resolution with national coverage in the absence of a complete and recent census, while also providing reliable estimates of uncertainty to support informed decision making.

99 GENERAL AND MISCELLANEOUS↗

The Schmidt Law in six galactic massive star-forming regions

We present a census of young stars in five massive star-forming regions in the 4th Galactic quadrant, G305, G326-4, G326-6, G333 (RCW 106), and G351, and combine this census with an earlier census of young stars in NGC 6334. Each region was observed at J, H, and K{sub s} with the NOAO Extremely Wide-Field Infrared Imager and combined with deep observations taken with the Infrared Array Camera (IRAC) on board the Spitzer Space Telescope at the wavelengths 3.6 and 4.5 μm. We derived a five band point-source catalog containing >200,000 infrared sources in each region. We have identified a total of 2871 YSO candidates, 363 Class I YSOs, and 2508 Class II YSOs. We mapped the column density of each cloud using observations from Herschel between 160 and 500 μm and near-infrared extinction maps in order to determine the average gas surface density above A{sub V} > 2. We study the surface density of the YSOs and the star-formation rate as a function of the column density within each cloud and compare them to the results for nearby star-forming regions. We find a range in power-law indices across the clouds, with the dispersion in the local relations in an individual cloud much lower than the average over the six clouds. We find the average over the six clouds to be Σ{sub SFR}∼Σ{sub gas}{sup 2.15±0.41} and power-law exponents ranging from 1.77 to 2.86, similar to the values derived within nearby star-forming regions, including Taurus and Orion. The large dispersion in the power-law relations between individual Milky Way molecular clouds reinforces the idea that there is not a direct universal connection between Σ{sub gas} and a cloud's observed star-formation rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Resolve survey photometry and volume-limited calibration of the photometric gas fractions technique

We present custom-processed ultraviolet, optical, and near-infrared photometry for the REsolved Spectroscopy of a Local VolumE (RESOLVE) survey, a volume-limited census of stellar, gas, and dynamical mass within two subvolumes of the nearby universe (RESOLVE-A and RESOLVE-B). RESOLVE is complete down to baryonic mass ∼10{sup 9.1−9.3} M{sub ⊙}, probing the upper end of the dwarf galaxy regime. In contrast to standard pipeline photometry (e.g., SDSS), our photometry uses optimal background subtraction, avoids suppressing color gradients, and employs multiple flux extrapolation routines to estimate systematic errors. With these improvements, we measure brighter magnitudes, larger radii, bluer colors, and a real increase in scatter around the red sequence. Combining stellar mass estimates based on our optimized photometry with the nearly complete H i mass census for RESOLVE-A, we create new z = 0 volume-limited calibrations of the photometric gas fractions (PGF) technique, which predicts gas-to-stellar mass ratios (G/S) from galaxy colors and optional additional parameters. We analyze G/S-color residuals versus potential third parameters, finding that axial ratio is the best independent and physically meaningful third parameter. We define a “modified color” from planar fits to G/S as a function of both color and axial ratio. In the complete galaxy population, upper limits on G/S bias linear and planar fits. We therefore model the entire PGF probability density field, enabling iterative statistical modeling of upper limits and prediction of full G/S probability distributions for individual galaxies. These distributions have two-component structure in the red color regime. Finally, we use the RESOLVE-B 21 cm census to test several PGF calibrations, finding that most systematically under- or overestimate gas masses, but the full probability density method performs well.

79 ASTRONOMY AND ASTROPHYSICS↗

Climate change and federal aid disbursements after Hurricane Harvey: an extreme event attribution analysis

The role climate change plays in increasing the burden placed on governments and insurers to pay for recovery has not been extensively explored and is the focus of this study. This study examines the impacts of climate change attributed flooding on federal disaster aid disbursement in Harris County, Texas following Hurricane Harvey in 2017. Our approach uses flood models to estimate the amount of flood damages attributable and not attributable to climate change under two climate change attribution scenarios from peer reviewed studies: 20% and 38% increases in rainfall associated with the hurricane due to climate change. These estimates are combined with census tract-level disbursement data for FEMA’s National Flood Insurance Program (NFIP) and the Individual Assistance (IA) part of the Individuals and Households Program. We employ spatial lag regression models with direct and spatial spillover effects to analyze the relationship between a tract’s flood damages—both attributed and not attributed to climate change—and federal disaster aid. We find that both types of flood damage shape federal aid disbursements, but that climate change attributed damages tend to have larger effect sizes (elasticities) especially for IA. Specifically, for a 1% increase in additional climate change attributed damages per household in a census tract (under the 20% scenario), expected NFIP levels in that census tract are 0.26% higher and IA levels are 0.3% higher. Implications center on federal funding in an era of climate change.

FEMA↗

Topological phases of eternal inflation

''Eternal inflation'' is a term that describes a number of different phenomena that have been classified by Winitzki. According to Winitzki's classification, these phases can be characterized by the topology of the percolating structures in the inflating, 'white', region. In this paper we discuss these phases, the transitions between them, and the way they are seen by a 'Census Taker', a hypothetical observer inside the noninflating, 'black', region. We discuss three phases that we call 'black island', 'tubular', and 'white island'. The black island phase is familiar, composed of rare Coleman De Luccia bubble nucleation events. The Census Taker sees an essentially spherical boundary, described by the conformal field theory of the Friedmann-Robertson-Walker/conformal field theory (FRW/CFT) correspondence. In the tubular phase the Census Taker sees a complicated infinite genus structure composed of arbitrarily long tubes. The white island phase is even more mysterious from the black side. Surprisingly, when viewed from the noninflating region this phase resembles a closed, positively curved universe that eventually collapses to a singularity. Nevertheless, pockets of eternal inflation continue forever. In addition, there is an 'aborted' phase in which no eternal inflation takes place. Rigorous results of Chayes, Chayes, Grannan, and Swindle establish the existence of all of these phases, separated by first order transitions, in Mandelbrot percolation, a simple model of eternal inflation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deep Learning-Based Weather-Related Power Outage Prediction with Socio-Economic and Power Infrastructure Data

This paper presents a deep learning-based approach for hourly power outage probability prediction within census tracts encompassing a utility company's service territory. Two distinct deep learning models, conditional Multi-Layer Perceptron (MLP) and unconditional MLP, were developed to forecast power outage probabilities, leveraging a rich array of input features gathered from publicly available sources including weather data, weather station locations, power infrastructure maps, socio-economic and demographic statistics, and power outage records. Given a one-hour-ahead weather forecast, the models predict the power outage probability for each census tract, taking into account both the weather prediction and the location's characteristics. The deep learning models employed different loss functions to optimize prediction performance. Our experimental results underscore the significance of socio-economic factors in enhancing the accuracy of power outage predictions at the census tract level.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Testing for changes in biomass dynamics in large‐scale forest datasets

Abstract Tropical forest responses to climate and atmospheric change are critical to the future of the global carbon budget. Recent studies have reported increases in estimated above‐ground biomass (EAGB) stocks, productivity, and mortality in old‐growth tropical forests. These increases could reflect a shift in forest functioning due to global change and/or long‐lasting recovery from past disturbance. We introduce a novel approach to disentangle the relative contributions of these mechanisms by decomposing changes in whole‐plot biomass fluxes into contributions from changes in the distribution of gap‐successional stages and changes in fluxes for a given stage. Using 30 years of forest dynamic data at Barro Colorado Island, Panama, we investigated temporal variation in EAGB fluxes as a function of initial EAGB (EAGB i ) in 10 × 10 m quadrats. Productivity and mortality fluxes both increased strongly with initial quadrat EAGB. The distribution of EAGB (and thus EAGB i ) across quadrats hardly varied over 30 years (and seven censuses). EAGB fluxes as a function of EAGB i varied largely and significantly among census intervals, with notably higher productivity in 1985–1990 associated with recovery from the 1982–1983 El Niño event. Variation in whole‐plot fluxes among census intervals was explained overwhelmingly by variation in fluxes as a function of EAGB i , with essentially no contribution from changes in EAGB i distributions. The high observed temporal variation in productivity and mortality suggests that this forest is very sensitive to climate variability. There was no consistent long‐term trend in productivity, mortality, or biomass in this forest over 30 years, although the temporal variability in productivity and mortality was so strong that it could well mask a substantial trend. Accurate prediction of future tropical forest carbon budgets will require accounting for disturbance‐recovery dynamics and understanding temporal variability in productivity and mortality.

Rutishauser, Ervan↗

Characterizing the Spread of COVID-19 from Human Mobility Patterns and SocioDemographic Indicators

Mobility is an indicator of human movement through space and time. With the increasing availability of geolocated data (from GPS, accelerometers, etc.), it is now possible to examine individual as well as group human mobility patterns. Human mobility is influenced by both intrinsic (i.e. personal motivations) and extrinsic (i.e., events like natural hazards or a pandemic like the COVID-19) factors. However, the intricate relationships between human mobility patterns and sociodemographic characteristics in the context of a pandemic are yet to be fully explored. Our goal is to overcome this gap by using human mobility data at the census block group level from mobile phones and combining those with social vulnerability indicators to examine the overall spread of COVID-19 at local spatial scales. We used 585,878 weekly visits to 37,871 points of interests (POIs) from Safegraph to quantify mobility indices and social distancing metrics in 2,820 census block groups in the city of Los Angeles (LA) - before and during lockdown as well as during the phase1 and phase 2 reopening. Finally, using supervised machine learning algorithms, we classified the census block groups in LA into High, Medium and Low categories that represented the vulnerability of these block groups based on the cumulative number of occurrences of COVID-19 cases till July 24, 2020. Our results indicate that the tree-based classifiers performed well in comparison to the Support Vector Machines and Multinomial Logit models. Gradient Boosting had the highest classification accuracy of 97.4% COVID-19 with an AUC score of 0.987. The block groups with high COVID-19 cases also had a high concentration of socially vulnerable populations, high human mobility index and a low social distancing index.

Roy, Avipsa↗

Incorporating Social Vulnerability Variables in Measures to Quantify Access to Opportunities

Herein this study quantifies access to travel opportunities to understand what societal factors are linked with local access and to identify communities with reduced access. We introduce a method to compare accessibility across all census tracts in the United States that can be used across geographically diverse communities ranging from sparsely to densely populated areas. This study considers six key opportunities which we consider essential for all communities (grocery stores, public schools, daycares, primary care doctors, pharmacies, and parks), and six additional destinations which can be viewed as a social safety net (homeless shelters, women’s shelters, food pantries, libraries, vocational schools, and banks). We quantify accessibility to these opportunities within a 15 min walk, transit trip, bicycle ride, and automobile drive for every census tract in the United States, and observe a decrease in vehicle miles traveled and vehicle ownership in tracts with increased walkability. Through analysis at the census tract level, this study incorporates variables of social vulnerability with these cumulative opportunity metrics to better understand diminished accessibility as attributed to social and racial inequities. As example findings, we find decreased access to financial services in communities with high minority and limited English speaking populations, no apparent change in access for childcare in communities with high percentages of single-parent families, and potentially increased or decreased access to women’s healthcare resources for Black women depending on the travel mode.

99 GENERAL AND MISCELLANEOUS↗

Tree damage and mortality measurements across seven ForestGEO plots in the tropics between Oct 2016 and Mar 2023

Annual records (raw data) on tree survival and structural completeness of 36,524 trees (2,467 species) collected across 29 censuses in seven tropical forests distributed across the Neotropics (Amacayacu, Colombia; Barro Colorado Island (BCI), Panamá; Yasuní, Ecuador) and Asia (Fushan, Taiwan; Huai Kha Khaeng (HKK), Thailand; Khao Chong (KC), Thailand; Pasoh, Malaysia). This dataset was used to compare aboveground biomass loss via damage to living trees relative to total AGB loss (mortality + damage). Variable definitions: site: name of the ForestGEO plot stemID.ams: Unique ID for the stem in the annual mortality surveys (ams) treeID.ams: Unique ID for the tree in the ams date.full.census: date of the previous full census of the plot, format: YYYY-MM-DD dbh.full.census: diameter at the breast height (dbh in mm) measured during the previous full census of the plot home: height of measurement of dbh (in m) meanWD: species-level wood density (g cm-3) date.ams: date of the ams, format: YYYY-MM-DD status: survival status of the tree (A: alive; D: dead; NF: not found; "?": unknown) H_considering_damage: living length of the main axis in meters; provides an estimate of the amount of remaining living tissues along the main axis of the stem (e.g., the height of breakage or the height discounting wood decay) b: the remaining proportion of branch volume within the living length (b∈[0,1]). weights.ind: frequency of the [size class x species] bins within the forest plot relative to their frequency in the sample. Necessary to extrapolate estimates to the whole plot.

54 ENVIRONMENTAL SCIENCES↗

Phase I Study to Characterize the Market Potential for Non-Motorized Travel (Final Report)

The idea of livable communities suggests that people should have the option to utilize non-motorized travel (NMT), specifically walking and bicycling, to conduct their daily tasks. Forecasting personal travel by walk and bike is necessary as part of regional transportation planning, and requires fine detail not only about individual travel, but also on transportation and neighborhood infrastructure. In an attempt to characterize the 'market' potential for NMT, the Office of Planning, Federal Highway Administration (FHWA) funded the Center for Transportation Analysis (CTA) of the Oak Ridge National Laboratory (ORNL) to conduct a study. The objectives of this effort were to identify factors that influence communities to walk and bike and to examine why, or why not, travelers walk and bike in their communities. This study relied on information collected under the 2009 National Household Travel Survey (NHTS) as the major source of data, and was supplemented with data from the American Community Survey (ACS), educational survey, health, employment, and others. Initial statistical screening methods were applied to sort through over 400 potential predictor variables, and examined with various measures (e.g., walk trip per person, walk mileage per person, bike trip per person, bike mileage per person) as the dependent variables. The best geographic level of detail used in the modeling for this study was determined to be the Census block group level for walking and Census tract level for biking. The need for additional supplemental private data (i.e., Walk Scores and Nielsen employment data), and geospatial information that reflects land use and physical environments, became evident after an examination of findings from the initial screening models. To be feasible, in terms of costs and time, the geographic scale of the study region was scaled down to nine selected NHTS add-on regions. These regions were chosen based on various criteria including transit availability, population size, and a mix of geographic locations across the nation. Given the similarities in modeling results from walk trips and walk mileages, additional modeling efforts conducted under the later part of this study were focused on walk trips per person. Bike models were limited only with the stepwise logistic models using Census tracts in the selected regions. Due to NHTS sampling limitations, only about 12% of these tracts have bike trips recorded from NHTS sampled households. The modeling with NHTS bike data proved to be more challenging and time consuming than what was anticipated. Along with the late arrival of Nielsen employment data, the project team had to limit the modeling effort to focus on walking. Therefore, the final modeling and discriminant analysis was conducted only for walking trips.

54 ENVIRONMENTAL SCIENCES↗

Population Files for Use With CAP88 at Los Alamos

CAP88 (Clean Air Act Assessment Package 1988) is a computer model developed for the US Environmental Protection Agency to assess the potential dose from radionuclide emissions to air and to demonstrate compliance with the Clean Air Act. It has options to calculate either individual doses, in units of mrem, or a collective dose, also called population dose, in units of person-rem. To calculate the collective dose, CAP88 uses a population file such as LANL.pop, that lists the number of people in each sector (N, NNE, NE, etc.) as a function of distance (1 to 2 km, etc.) out to a maximum radius of 80 km. Early population files are described in the Los Alamos National Laboratory (LANL) Environmental Reports for 1985 (page 14) and subsequent years. LA-13469-MS describes a population file based on the 1990 census. These files have been updated several times, most recently in 2006 for CAP88 version 3. The 2006 version used the US census for 2000. The present paper describes the 2012 updates, using the 2010 census.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

SecPop Version 4: Sector Population Land Fraction and Economic Estimation Program: Users? Guide Model Manual and Verification Report.

In 1973 the U.S. Environmental Protection Agency (EPA) developed SecPop to calculate population estimates to support a study on air quality. The Nuclear Regulatory Commission (NRC) adopted this program to support siting reviews for nuclear power plant construction and license applications. Currently SecPop is used to prepare site data input files for offsite consequence calculations with the MELCOR Accident Consequence Code System (MACCS). SecPop enables the use of site-specific population, land use, and economic data for a polar grid defined by the user. Updated versions of SecPop have been released to use U.S. decennial census population data. SECPOP90 was released in 1997 to use 1990 population and economic data. SECPOP2000 was released in 2003 to use 2000 population data and 1997 economic data. This report describes the current code version, SecPop version 4.3, which uses 2010 population data and both 2007 and 2012 economic data. It is also compatible with 2000 census and 2002 economic data. At the time of this writing, the current version of SecPop is 4.3.0, and that version is described herein. This report contains guidance for the installation and use of the code as well as a description of the theory, models, and algorithms involved. This report contains appendices which describe the development of the 2010 census file, 2007 county file, and 2012 county file. Finally, an appendix is included that describes the validation assessments performed.

54 ENVIRONMENTAL SCIENCES↗

Internet Access Index: Measuring the availability and household adoption of high-speed internet

Access to broadband or high-speed internet has taken on increased importance during the COVID-19 pandemic as many workplaces and schools shifted to a virtual environment. The Internet Access Index (IAI) was developed to better understand the challenges many households face in connecting to high-speed internet, whether due to lack of broadband availability from internet service providers or difficulties in subscribing to a broadband service. The IAI is calculated as the product of 3 factors. The first two factors gauge the quality and availability of high-speed internet and the third factor represents the public’s ability to subscribe to high-speed internet services. The IAI scores United States’ census tracts on a [0,1] scale, where values near 0 represent areas with less internet access and values approaching 1 represent more internet access. The maximum score (1.0) implies that all census blocks within a census tract have high speed internet available at the highest national speed (currently 1000 mbps), and that all households within the tract have a fixed broadband subscription of some type.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Building ENergy Demand (BEND) Model: A Comprehensive Composite Building Energy Modeling Framework

The Building ENergy Demand (BEND) model was developed at Pacific Northwest National Laboratory (PNNL) to simulate climate-dependent hourly building energy demand with the ability to disaggregate down to or aggregate up to any geographic area of interest, including counties, states, electric utility service territories, and census regions. The BEND modeling framework is designed to study the effects of climate change, economics, technology advancement, and various mitigation policies on aggregate building energy demand. To make the process computationally feasible, BEND reduces granularity in building characteristics and weather forcing while maintaining enough detail to minimize systematic differences (biases) between BEND results and data from the Energy Information Administration (EIA). Based on the Commercial Building Energy Consumption Survey (CBECS) and Residential Energy Consumption Survey (RECS) databases, BEND establishes a set of representative buildings with predefined sets of building types, sizes, and vintages. These representative buildings are defined for each of the four U.S. census regions and the five climate zones used by the EIA for building surveys (hereafter “EIA climate zones”). BEND’s representative buildings are based on a statistical analysis of the CBECS and RECS databases that infers detailed parameters such as construction type, thermal properties, internal loads, equipment and mechanical systems, and operation schedules from the high-level descriptors in those databases (building type, vintage, size, and location). The representative buildings are simplified and consolidated into a set of prototype buildings for the purpose of simulating building energy demand. Combining the prototype buildings with weather files from selected locations and years, BEND creates a set of simulation-ready building models to be run using the EnergyPlus simulation engine (EnergyPlus). The base spatial unit of each BEND simulation is a subregion that is the intersection of an International Energy Conservation Code climate zone, a census region, and an EIA climate zone; analysis for each spatial unit is influenced by the weather file BEND selects to represent the climate-similar area. The major simulation outputs of interest to BEND are hourly energy consumption values for each simulated year, possibly for multiple fuel types. Based on building-stock weights derived from the CBECS/RECS data, the hourly output streams are aggregated to a single, 8760-hour load profile for each of the major building categories—residential and commercial—with the possibility of segregating by fuel types. To correct for biases inherent in the use of a limited suite of representative buildings, BEND is calibrated against observational targets of total annual building energy consumption and hourly load profiles (including peak demand) obtained for the decision-relevant geographic scales of interest (e.g., total electric load data for individual balancing authorities available from EIA). Based on available data such as population distribution, BEND is able to aggregate both up and down scales, allowing the study of building energy demand over a range of spatial scales (e.g., states or counties within the Western Electricity Coordinating Council, Eastern Interconnection, or the entire U.S.) and/or subsets of building types (e.g., office buildings with particular size ranges).

24 POWER TRANSMISSION AND DISTRIBUTION↗