SEARCH · Engineering Papers

Results for “CONSTRUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Building rehabilitation versus demolition and new construction: Economic and environmental assessment

Since the end of the twentieth century, discussion on dwelling rehabilitation versus its demolition and new construction has been steadily increasing in intensity, which is especially due to the necessity for the regeneration of urban centres. However, rehabilitation is not always considered the most economical solution, and demolition and new construction may constitute a better option. In the present work, a multi-family building in Seville, Spain, is used as a case study. After having suffered damage from a construction failure, it is assessed for its complete rehabilitation. Defective maintenance has worsened the bad condition of the building. A model is proposed, from the project budget perspective, that allows the environmental (Ecological Footprint indicator) and the economic (project's bill of quantities) assessment of the recovery of the dwelling. In the case study, the rehabilitation Ecological Footprint and the project cost are 0.06 gha/m{sup 2} of floor area (457.22 EUR/m{sup 2}) and 0.14 gha/m{sup 2} (576.33 EUR/m{sup 2}) for a new building on the same plot, respectively. It can be deduced that, even with a severely damaged building, the repair and retrofit work incurs a lower economic and environmental impact than that of the total replacement with a new construction.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

Decoupling relationship between economic output and carbon emission in the Chinese construction industry

By positioning in the discourse that economic output is always coupled with natural resource depletion, pollution, and carbon emission, decoupling analysis is widely adopted to evaluate how “quality” economic growth can lead to fewer such downsides so as to encourage sustainable development. This paper aims at examining the decoupling relationship between economic output and carbon emission by focusing on China's construction industry, which is a pillar industry for national economic growth, meanwhile contributes a huge amount of carbon emission. The method of Tapio decoupling model is used to examine the decoupling relationships at both national and provincial levels from 2005 to 2015. It continues to identify the driving force leading to a certain decoupling state by adopting the logarithmic mean Divisia index (LMDI). Results show that: (1) there existed an expansive decoupling relationship between economic growth and construction carbon emission in most provinces of China during 2005–2015; (2) Shanghai presented the best decoupling performance, while in contrast, other provinces such as Guizhou and Fujian displayed expansive negative decoupling state; and (3) “Economic output” played the most significant role in inhibiting the decoupling at both national and provincial levels, while “Indirect carbon intensity” was the main driver for promoting the national decoupling. Although the paper refers to the specific construction of China, the decoupling analysis approach can be extended to other countries as well as to other pollutants such as land pollution, waste water and haze. The understanding of driving forces for the decoupling state in China's construction industry provides international policy-makers with valuable reference for formulating effective measures to balance the dilemma between economic output and carbon emission.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Improved digital construction binder solution utilizing calcium aluminate additive for Infrastructure Scale Additive Manufacturing

Oak Ridge National Laboratory (ORNL) worked with Kerneos Inc., a Division of Imerys USA, Inc. to develop an improved digital construction binder using calcium aluminate additives produced by Kerneos along with locally available concrete materials. When the two-stage (2K) binder formulation was added to commercially available Portland Limestone Cement and sand to form a digital construction mortar, its strength exceeded a number of commercially available digital construction binders both at early and later ages. At the same time, the developed formulation showed precise control of setting time after addition and showed very low shrinkage making it a strong, reliable, and easily customizable alternative to fixed proprietary digital construction binders.

36 MATERIALS SCIENCE↗

NASA NTRS2005

Behavior-based multi-robot collaboration for autonomous construction tasks

The Robot Construction Crew (RCC) is a heterogeneous multi-robot system for autonomous construction of a structure through assembly of Long components. The two robot team demonstrates component placement into an existing structure in a realistic environment. The task requires component acquisition, cooperative transport, and cooperative precision manipulation. A behavior-based architecture provides adaptability. The RCC approach minimizes computation, power, communication, and sensing for applicability to space-related construction efforts, but the techniques are applicable to terrestrial construction tasks.

autonomous construction↗

NASA NTRS2004

Sustainable Cooperative Robotic Technologies for Human and Robotic Outpost Infrastructure Construction and Maintenance

Robotic Construction Crew (RCC) is a heterogeneous multi-robot system for autonomous acquisition, transport, and precision mating of components in construction tasks. RCC minimizes resources constrained in a space environment such as computation, power, communication and, sensing. A behavior-based architecture provides adaptability and robustness despite low computational requirements. RCC successfully performs several construction related tasks in an emulated outdoor environment despite high levels of uncertainty in motions and sensing. Quantitative results are provided for formation keeping in component transport, precision instrument placement, and construction tasks.

multi-robot systems↗

NASA NTRSDate not supplied

Experimental Considerations for Ground-Based Testing of Lunar Construction Technologies

NASA’s Moon-To-Mars Planetary Autonomous Construction Technology (MMPACT) project seeks to research, develop, and demonstrate lunar surface construction capabilities - Quantification of lunar regolith’s geotechnical properties allows for effective prediction of forces and displacement during excavation and construction and is critical to facilitating regolith sintering capabilities all of which benefit lunar infrastructure plans - Knowledge of shear strength, Mohr-Coulomb cohesion, angle of internal friction, bearing strength, bulk density, etc. is needed - Ground-based testing of various lunar simulants with relevant hardware (e.g., robotic arm tools) enables validation of technology choices, tool paths, and lunar surface construction activities - Use of Taguchi methods [1] will minimize the number of needed experiments to explore critical input parameter

Moon↗

NASA NTRSDate not supplied

Development of the Advanced Regolith Ground Operations (ARGO) Test Bed – A Robotic Excavation and Construction Test Facility with Simulated Lunar Environments

NASA’s Artemis Program is working towards developing a sustained presence on the Moon and eventually Mars. To achieve this goal, robotic excavation, site preparation and construction technologies are under development to establish the capability to construct infrastructure such as launch/landing pads and radiation protection shelters. Technologies must be proven in simulated Lunar conditions prior to surface demonstration missions. To that end, the Relevant Additive Construction Technology (REACT) Announcement of Collaboration Opportunities (ACO) project with AI Space Factory and the NASA Kennedy Space Center’s (KSC) Granular Mechanics and Regolith Operations Laboratory (a.k.a. Swamp Works) has developed the Advanced Regolith Ground Operations (ARGO) Test Bed. ARGO includes a ~1.5m x 1.5m x 1.2m (~5x5x4ft) vacuum chamber, cryogenically cooled thermal shroud, 3-axis robotic positioning system, and regolith bin. For the REACT project, a pellet extruder, feed hopper, and heated 600mm x 600mm (23.6x23.6in) build plate have been installed on ARGO to advance the Technology Readiness Level (TRL) of regolith-polymer composite Fused Deposition Modeling (FDM) additive construction systems, processes, and materials. This paper will focus on the design and operational characteristics of the ARGO Test Bed with pellet extruder.

regolith↗

NASA NTRSDate not supplied

Development of the Advanced Regolith Ground Operations (ARGO) Test Bed: A Robotic Excavation and Construction Test Facility with Simulated Lunar Environments

regolith↗

NASA NTRS2023

Moon-to-Mars Planetary Autonomous Construction Technology: MMPACT Material Screening

NASA’s Space Technology Mission Directorate “champions technologies needed to live on and explore the Moon” [1]. This includes capabilities that capitalize on existing lunar resources and carry out surface manufacturing and construction activities. The goal of the Moon-to-Mars Planetary Construction Technology (MMPACT) Project is to mature these two capabilities. The primary resource on the Moon and the primary feedstock for manufacturing and construction is regolith. In the past, astronauts launched, landed, and lived in a spacecraft. NASA envisions a future where we make living spaces on the lunar surface instead. The innovative technologies required for lunar surface construction may be something never seen before, or they may be adaptations of existing technologies. MMPACT must screen for the most feasible technologies with the earliest potential technology insertions given the ambitious goals of the Artemis campaign. This poster summarizes recent efforts to discover and document mechanical and thermal capabilities of various technologies: a laser-based vitreous material transformation from Texas-based ICON, a molten extrusion process from ICON, a mortar from MSFC, a mortar from an MSFC-Louisiana State University partnership, and a geopolymer from a MSFC-Pennsylvania State University partnership. Other testing and development activities are documented as well. [1] https://www.nasa.gov/directorates/spacetech/Lunar_Surface_Innovation_Initiative

In-situ Resource Utilization↗

DOE OSTI2022

Contech to Accelerate Cleantech: Seeding Emerging Innovation Programs for Construction Productivity and Energy Efficiency Integration; Preprint

Investments in U.S.-based start-ups that focus on advanced building construction technologies to increase construction productivity (contech) surged to approximately $3.1 billion in 2018 (as per Crunchbase data). More recently, emerging programs by government funding agencies, philanthropic foundations, and venture capitalists have been instrumental in supporting contech start-ups for innovations that increase productivity of energy efficiency integration and accelerate clean energy technologies (cleantech) for the buildings sector. These programs include R&D support and funding mechanisms for contech and cleantech. Traditionally, contech and cleantech are considered as two different innovation ecosystems. To enhance and scale up energy efficiency in buildings, creative programs that bring together contech and cleantech are critical. This paper provides a landscape assessment of the "contech-for-cleantech" innovation ecosystem in the U.S. and its impact in accelerating technology readiness and the development pipeline of "contech-for-cleantech". Technologies highlighted are robotics for retrofits, prefabrication of energy-efficient products, and advanced manufacturing of low-carbon net-zero buildings construction. Programs discussed include those led by (1) government funding agencies: American-Made Challenges with prizes like E-ROBOT for retrofits with robotics, (2) philanthropic foundations: Wells Fargo Innovation Incubator (IN2) that includes focus on energy efficiency and prefabrication, and (3) venture capitalists: Shadow Ventures Green Building Accelerator program which provides funding support to start-ups with ambitious plans for decarbonizing the built environment. This paper will also expand upon robust processes and criteria involved in judging and down-selection of start-ups through vetting and feedback from national lab researchers and industry experts in both cleantech and contech.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

The Schwinger-Keldysh coset construction

The coset construction is a tool for systematically building low energy effective actions for Nambu-Goldstone modes. This technique is typically used to compute time-ordered correlators appropriate for S-matrix computations for systems in their ground state. In this paper, we extend this technique to the Schwinger-Keldysh formalism, which enables one to calculate a wider variety of correlators and applies also to systems in a mixed state. We focus our attention on internal symmetries and demonstrate that, after identifying the appropriate symmetry breaking pattern, Schwinger-Keldysh effective actions for Nambu-Goldstone modes can be constructed using the standard rules of the coset construction. Particular emphasis is placed on the thermal state and ensuring that correlators satisfy the KMS relation. We also discuss explicitly the power counting scheme underlying our effective actions. We comment on the similarities and differences between our approach and others that have previously appeared in the literature. In particular, our prescription does not require the introduction of additional “diffusive” symmetries and retains the full non-linear structure generated by the coset construction. We conclude with a series of explicit examples, including a computation of the finite-temperature two-point functions of conserved spin currents in non-relativistic paramagnets, antiferromagnets, and ferromagnets. Along the way, we also clarify the discrete symmetries that set antiferromagnets apart from ferromagnets, and point out that the dynamical KMS symmetry must be implemented in different ways in these two systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2017

A gene-within-a-gene Cas9/sgRNA hybrid construct enables gene editing and gene replacement strategies in Chlamydomonas reinhardtii

Previous studies demonstrated highly inefficient gene editing in C. reinhardtii using conventional Cas9 and sgRNA genes (only 1 editing event using > 1.5 × 10 9 initial cells). Design and testing of a hybrid gene-within-a-gene construct (composed of a Cas9 gene containing an artificial intron with an inserted sgRNA gene) demonstrated that such constructs were functional both in tobacco cells and C. reinhardtii cells. In tests with C. reinhardtii, approximately one in every ~ 3 × 10 7 initial cells contained an edited version of the targeted FKB12 gene (i.e., an average of ~ 3 colonies with an edited FKB12 gene per electroporation using 108 initial cells). Lack of an intact Cas9/intron-sgRNA gene in cells carrying either of two different edited genes strongly suggested that editing was due to transient expression of the Cas9/intron-sgRNA gene and the likely toxicity of long-term expression of Cas9 in C. reinhardtii cells. Co-transformation of the arginine-requiring mutant, arg7-8, with Cas9/intron-sgRNA constructs and appropriately designed synthetic, 80 nucleotide ssDNAs complementary to the argininosuccinate lyase (ARG) gene led to successful homologous recombination or nucleotide replacement and production of arginine prototrophs. Here as a practical application, a similar ssDNA oligonucleotide targeting the acetolactate synthase (ALS) gene and an appropriate Cas9/intron-sgRNA construct was used to create cells resistant to the herbicide, sulfometuron methyl.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2017

One-step construction of a molybdenum disulfide/multi-walled carbon nanotubes/polypyrrole nanocomposite biosensor for the ex-vivo detection of dopamine in mouse brain tissue

Highlights: • Ex vivo dopamine detection in mouse brain tissues of Parkinson's disease model. • Nanocomposite constructed by one-step electrochemical approach. • The synergetic performance enhancement of the sensor by nanocomposite. We developed a new strategy for construction of a biosensor for the neurotransmitter dopamine. The biosensor was constructed by one-step electrochemical deposition of a nanocomposite in aqueous solution at pH 7.0, consisting of molybdenum disulfide, multi-walled carbon nanotubes, and polypyrrole. A series of analytical methods was performed to investigate the surface characteristics and the improved electrocatalytic effect of the nanocomposite, including cyclic voltammetry, electrochemical impedance spectroscopy, field-emission scanning electron microscopy, atomic force microscopy, and Raman spectroscopy. The constructed biosensor showed high sensitivity (1.130 μAμM{sup −1}cm{sup −2}) with a dynamic linearity range of 25–1000 nM and a detection limit of 10 nM. Additionally, the designed sensor exhibited strong anti-interference ability and satisfactory reproducibility. The practical application of the sensor was manifested for the ex vivo determination of dopamine neurotransmitters using brain tissue samples of a mouse Parkinson's disease model.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2018

Construction of Ni-Co-Mn layered double hydroxide nanoflakes assembled hollow nanocages from bimetallic imidazolate frameworks for supercapacitors

Highlights: • Bimetallic Co-Mn ZIF is successfully prepared. • N-Co-Mn LDH nanoflakes assembled hollow nanocage is constructed by a MOF templating method. • The N-Co-Mn LDH exhibits excellent pseudocapacitive performance. - Abstract: Layered double hydroxides (LDHs) with 3-dimentional (3D) hollow nanoarchitetures are highly desirable for energy related applications. In this study, Ni-Co-Mn LDH nanoflakes assembled hollow nanocages are constructed from bimetallic imidazolate framworks precursors. Benefiting from the 3D hierarchical porous strcuture and composition, the as-synthesized ternary Ni-Co-Mn LDH hollow nanocage, as a electrode for supercapacitor, demonstrates a remarkable electrochemical performance with a high specific capacitance of 2012.5 F g{sup −1} at 1 A g{sup −1} and a good rate capacity of 75.0% retention at 10 A g{sup −1}, significantly outperforming binary Ni-Co LDH (1266.2 F g{sup −1} at 1 A g{sup −1}, 41.8% retention at 10 A g{sup −1}). This work demonstrates the construction of 3D hollow nanostructured LDH with multicomponent compositions for the first time, and can be simply extended to construct other hollow structured electrode materials for energy storage devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

How demand for and trade of construction materials affects greenhouse gas emissions

Construction materials generate nearly one-third of global carbon emissions, yet conventional accounting captures only a fraction of this impact. Using EXIOBASE data spanning 25 years, we tracked emissions across construction supply chains for cement, steel, metals, and plastics. While global construction demand nearly tripled, regional patterns diverged significantly. The EU reduced emissions despite increased demand through renewable energy adoption and emissions trading, while China's construction boom—driving most global growth—significantly increased domestic emissions. Manufacturing contributes most to embodied emissions compared to resource extraction and waste treatment. Increased reliance on offshore production undermines domestic emission control strategies, highlighting the need for expanded carbon border adjustment mechanisms. Without policies addressing full supply chain emissions, even aggressive climate initiatives will be compromised by carbon leakage, creating an emissions trajectory incompatible with global climate targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Construct design for CRISPR/Cas-based genome editing in plants

CRISPR construct design is a key step in the practice of genome editing, which includes identification of appropriate Cas proteins, design and selection of guide RNAs (gRNAs), and selection of regulatory elements to express gRNAs and Cas proteins. Here, we review the choices of CRISPR-based genome editors suited for different needs in plant genome editing applications. We consider the technical aspects of gRNA design and the associated computational tools. We also discuss strategies for the design of multiplex CRISPR constructs for high-throughput manipulation of complex biological processes or polygenic traits. We provide recommendations for different elements of CRISPR constructs and discuss the remaining challenges of CRISPR construct optimization in plant genome editing.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2017

Comparative environmental evaluation of construction waste management through different waste sorting systems in Hong Kong

Highlights: • Environmental performance of building CWM through different sorting systems was evaluated by LCA. • Environmental impacts of CWM systems depend on the composition of waste. • Significant environmental benefits are observed for CWM through on-site sorting system. • On-site sorting promotes materials recovery and reduces waste disposal into landfill sites. - Abstract: This study aimed to compare the environmental performance of building construction waste management (CWM) systems in Hong Kong. Life cycle assessment (LCA) approach was applied to evaluate the performance of CWM systems holistically based on primary data collected from two real building construction sites and secondary data obtained from the literature. Different waste recovery rates were applied based on compositions and material flow to assess the influence on the environmental performance of CWM systems. The system boundary includes all stages of the life cycle of building construction waste (including transportation, sorting, public fill or landfill disposal, recovery and reuse, and transformation and valorization into secondary products). A substitutional LCA approach was applied for capturing the environmental gains due to the utilizations of recovered materials. The results showed that the CWM system by using off-site sorting and direct landfilling resulted in significant environmental impacts. However, a considerable net environmental benefit was observed through an on-site sorting system. For example, about 18–30 kg CO{sub 2} eq. greenhouse gases (GHGs) emission were induced for managing 1 t of construction waste through off-site sorting and direct landfilling, whereas significant GHGs emission could be potentially avoided (considered as a credit −126 to −182 kg CO{sub 2} eq.) for an on-site sorting system due to the higher recycling potential. Although the environmental benefits mainly depend on the waste compositions and their sortability, the analysis conducted in this study can serve as guidelines to design an effective and resource-efficient building CWM system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Constructing nested coordinates inside strongly shaped toroids using an action principle

A new approach for constructing polar-like boundary-conforming coordinates inside a toroid with strongly shaped cross-sections is presented. A coordinate mapping is obtained through a variational approach, which involves identifying extremal points of a proposed action in the mapping space from [0,2π] 2 ×[0,1] to a toroidal domain in $\mathbb{R}$ 3 . This approach employs an action built on the squared Jacobian and radial length. Extensive testing is conducted on general toroidal boundaries using a global Fourier–Zernike basis via action minimisation. The results demonstrate successful coordinate construction capable of accurately describing strongly shaped toroidal domains. The coordinate construction is successfully applied to the computation of three-dimensional magnetohydrodynamic equilibria in the GVEC code where the use of traditional coordinate construction by interpolation from the boundary failed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗