Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Synthesis and properties of Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} perovskite cathode material for intermediate temperature solid-oxide fuel cells

A highly stable perovskite cathode material, Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} (BSCZF) for intermediate temperature solid-oxide fuel cells (IT-SOFCs) was synthesized via the improved EDTA-citric acid complexing technique combined with high-temperature sintering. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectra (EIS) measurements. An electrolyte-supported BSCZF/SDC/Ni-SDC fuel cell was fabricated to evaluate the performance of the material. The XRD study indicates that the sintering temperature higher than 950 deg. C is sufficient to the formation of clean single BSCZF perovskite phase. Due to the incorporation of Zr ions, BSCZF perovskite exhibit lower electrical conductivity with higher activation energy but higher structural stability than the Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}} (BSCF) parent oxide. The maximum electrical conductivity of BSCZF attains 16.9 S cm{sup -1} at around 540 deg. C. Impedance spectra showed that the ASRs of BSCZF cathode on samaria doped ceria (Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9}, SDC) electrolyte are low but are still slightly larger than those of BSCF at similar conditions. The BSCZF/SDC/Ni-SDC cell exhibited a stable output with the maximum power densities of 30, 75, 139 and 241 mW cm{sup -2} at 550, 600, 650 and 700 deg. C, respectively. Due to the high electrochemical performances as well as the excellent stability, BSCZF perovskite may be an attractive cathode material for IT-SOFCs.

36 MATERIALS SCIENCE↗

Particle size effect of redox reactions for Co species supported on silica

Conversions of chemical states during redox reactions of two silica-supported Co catalysts, which were prepared by the impregnation method, were evaluated by using an in situ XAFS technique. The addition of citric acid into the precursor solution led to the formation on silica of more homogeneous and smaller Co particles, with an average diameter of 4 nm. The supported Co{sub 3}O{sub 4} species were reduced to metallic Co via the divalent CoO species during a temperature-programmed reduction process. The reduced Co species were quantitatively oxidized with a temperature-programmed oxidation process. The higher observed reduction temperature of the smaller CoO particles and the lower observed oxidation temperature of the smaller metallic Co particles were induced by the higher dispersion of the Co oxide species, which apparently led to a stronger interaction with supporting silica. The redox temperature between CoO and Co{sub 3}O{sub 4} was found to be independent of the particle size. - Graphical abstract: Chemical state conversions of SiO{sub 2}-supported Co species and the particle size effect have been analyzed by means of in situ XAFS technique. The small CoO particles have endurance against the reduction and exist in a wide temperature range. Display Omitted - Highlights: • The conversions of the chemical state of supported Co species during redox reaction are evaluated. • In operando XAFS technique were applied to measure redox properties of small Co particles. • A small particle size affects to the redox temperatures of cobalt catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pechini synthesis and characterization of molybdenum carbide and nickel molybdenum carbide

Carbides, such as {eta}-Ni{sub 6}Mo{sub 6}C, are considered as low-cost substitutes for noble metal catalysts for present applications in hydrodesulfurization and for a possible future sulfur-tolerant fuel cell anode catalyst. Most synthesis methods set the carbon content of the carbides by a carbon-based atmosphere or solid carbon in the synthesis. We show here that {beta}-Mo{sub 2}C and {eta}-Ni{sub 6}Mo{sub 6}C can be synthesized using a Pechini process, simply by heating metal acetates mixed with citric acid and ethylene glycol in one step under H{sub 2} with the only source of carbon being the precursor solution. The {beta}-Mo{sub 2}C forms when heating a Mo-acetate precursor at 850 deg. C. When using Ni- and Mo-acetates, {beta}-Mo{sub 2}C forms at 700 deg. C and lower temperatures, while {eta}-Ni{sub 6}Mo{sub 6}C forms during heating at 800-900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C has a surface area of 95.5 m{sup 2} g{sup -1} and less than 10 m{sup 2} g{sup -1} when prepared at 800 and 900 deg. C, respectively. Some Ni{sub 3}C, Ni, and NiC impurities are also present in the nanostructured {eta}-Ni{sub 6}Mo{sub 6}C that was prepared at 900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C materials made by the Pechini process are compared with those made from a traditional synthesis, using metal organic precursors at 1000 deg. C under CO/CO{sub 2} mixtures with a carbon activity of 0.011. Our results imply that H{sub 2} and the Pechini process can be used to achieve carbon activities similar to those obtained by methods using gaseous or solid carbon sources. - Graphical abstract: Ball and stick representation of the {eta}-Ni{sub 6}Mo{sub 6}C crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Foot & Mouth Disease & Ulcerative/Vesicular Rule-outs: Challenges Encountered in Recent Outbreaks

Foot and mouth disease (FMD) is a highly infectious and contagious viral disease affecting bovidae (cattle, zebus, domestic buffaloes, yaks), sheep, goats, swine, all wild ruminants and suidae. Camelidae (camels, dromedaries, llamas, vicunas) have low susceptibility. Foot and mouth disease is caused by a RNS virus of the family Picornaviridae, genus Aphthovirus. There are seven immunologically distinct serotypes: A, O, C, SAT1, SAT2, SAT3, Asia 1. Foot and mouth disease causes significant economic loss both to countries who manage it as an endemic disease (with or without vaccination), as well as those FMD free countries which may become infected. The mortality rate is low in adult animals, but often higher in young due to myocarditis. Foot and mouth disease is endemic in parts of Asia, Africa, the Middle East and South America (sporadic outbreaks in free areas). The Office of International Epizootics (OIE), also referred to the World Organization for Animal Health maintains an official list of free countries and zones.1 The OIE Terrestrial Code (Chapter 2.2.10) provides detailed information on the categories of freedom that can be allocated to a country as well as guidelines for the surveillance for foot and mouth disease (Appendix 3.8.7). In short, countries may be completely free of FMD, free with vaccination or infected with foot and mouth disease virus (FMDV). Source of FMDV include incubating and clinically affected animals with virus present in breath, saliva, faeces, urine, milk and semen. In experimental settings virus has been detected in milk several days before the onset of clinical signs2. Additional sources of virus are meat and by-products in which pH has remained above 6.0 as well as persistently infected carrier animals. Carrier animals may include cattle and water buffalo; convalescent animals and exposed vaccinates (virus persists in the oropharynx for up to 30 months in cattle or longer in buffalo, 9 months in sheep). Pigs do not become carriers. It has been shown that the African Cape buffalo are the major maintenance host of SAT serotypes. FMDV transmission can occur by either direct or indirect contact. Indirect transmission can occur via contaminated animate vectors (humans, etc.), inanimate vectors (vehicles, implements) or airborne transmission. Indirect disease transmission via animate or inanimate vectors can play a major role in disease transmission. Good biosecurity can significantly reduce this type of transmission. Airborne transmission is often debated and is known to be serotype and species specific as well as require specific environmental conditions to occur. Airborne transmission is favored in temperate zones and has been postulated to occur over distances of up to 60 km overland and 300 km by sea. Foot and mouth disease virus is an unenveloped virus which is preserved by refrigeration and freezing and progressively inactivated by temperatures above 50 C. FMDV is highly sensitive to pH change and is inactivated by pH < 6.0 or > 9.0. There are many disinfectants which are effective against FMDV including sodium hydroxide (2%), sodium carbonate (4%), and citric acid (0.2%). FMDV is resistant to iodophores, quaternary ammonium compounds, hypochlorite and phenol, especially in the presence of organic matter. The virus can survive in lymph nodes and bone marrow at neutral pH, but is destroyed in muscle when is pH < 6.0 i.e. after rigor mortis. FMDV can persist in contaminated feed/commodities and the environment for over to 1 month, depending on the temperature and pH conditions. The incubation period for FMD is 2-14 days. Animals transition through latent (infected but not infectious), subclinically infected (infectious but lacking clinical signs) clinically infected and recovered disease states. In cattle clinical signs include pyrexia, reluctance to eat, bruxism, drooling, lameness, treading or stamping of the feet and decreased milk production. Most clinical signs are related to the development and subsequent rupturing of vesicles at the coronary band and in the oral cavity. Vesicles and ulcerations can also occur on the mammary gland. Recovery in adult animals usually occurs in 8-15 days. Clinical signs for most serotypes are less dramatic in sheep and goats. Swine can develop very severe coronary band lesions and high mortality in piglets has been observed. One of the challenges of diagnosing FMD is that it may be clinically similar to several other vesicular or ulcerative diseases. FMD is clinically indistinguishable from Vesicular stomatitis, Swine vesicular disease and Vesicular exanthema of swine. It may also resemble Bovine viral diarrhea, Mucosal disease, Infectious bovine rhinotracheitis, Bluetongue, Bovine papular stomatitis, Bovine mammillitis and Rinderpest.

59 BASIC BIOLOGICAL SCIENCES↗

Acupuncture-Like Transcutaneous Electrical Nerve Stimulation Versus Pilocarpine in Treating Radiation-Induced Xerostomia: Results of RTOG 0537 Phase 3 Study

Purpose and Objectives: This report presents the analysis of the RTOG 0537 multicenter randomized study that compared acupuncture-like transcutaneous stimulation (ALTENS) with pilocarpine (PC) for relieving radiation-induced xerostomia. Methods and Materials: Eligible patients were randomized to twice-weekly 20-minute ALTENS sessions for 24 sessions during 12 weeks or PC (5 mg 3 times daily for 12 weeks). The primary endpoint was the change in the University of Michigan Xerostomia-Related Quality of Life Scale (XeQOLS) scores from baseline to 9 months from randomization (MFR). Secondary endpoints included basal and citric acid primed whole salivary production (WSP), ratios of positive responders (defined as patients with ≥20% reduction in overall radiation-induced xerostomia symptom burden), and the presence of adverse events based on the Common Terminology Criteria for Adverse Events version 3. An intention-to-treat analysis was conducted. Results: One hundred forty-eight patients were randomized. Only 96 patients completed the required XeQOLS and were evaluable at 9 MFR (representing merely 68.6% statistical power). Seventy-six patients were evaluable at 15 MFR. The median change in the overall XeQOLS in ALTENS and PC groups at 9 and 15 MFR were −0.53 and −0.27 (P=.45) and −0.6 and −0.47 (P=.21). The corresponding percentages of positive responders were 81% and 72% (P=.34) and 83% and 63% (P=.04). Changes in WSP were not significantly different between the groups. Grade 3 or less adverse events, mostly consisting of grade 1, developed in 20.8% of patients in the ALTENS group and in 61.6% of the PC group. Conclusions: The observed effect size was smaller than hypothesized, and statistical power was limited because only 96 of the recruited 148 patients were evaluable. The primary endpoint—the change in radiation-induced xerostomia symptom burden at 9 MFR—was not significantly different between the ALTENS and PC groups. There was significantly less toxicity in patients receiving ALTENS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis and crystal chemical evolution of fresnoite powders

(Ba,Sr){sub 2}TiSi{sub 2}O{sub 8} fresnoite powders were prepared via a Pechini process in which citric acid and ethylene glycol were used as complexing agents. The resulting gel contained a homogeneous distribution of the metal ions that suppressed the formation of (Ba,Sr)TiO{sub 3} perovskite as a secondary phase during calcination. Phase development was examined as by isochronal and isothermal reaction analysis. A combination of thermo- and differential gravimetric analysis (TGA-DGA), quantitative X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed that calcination at 900 Degree-Sign C/12 h yielded finely crystalline ({approx}70 nm) Ba{sub 2}TiSi{sub 2}O{sub 8} (BTS) and Sr{sub 2}TiSi{sub 2}O{sub 8} (STS). The endmembers and compositional intermediates crystallized directly from the Pechini resin and indirectly through reaction of (Ba,Sr)CO{sub 3}, (Ba,Sr)TiO{sub 3} and a silica-rich glass intermediates. This new method for preparing fresnoite yields materials suitable for consolidation as dense monolithic dielectrics or for use as high surface area catalytic powders. - Graphical abstract: The Pechini synthesis of (Ba, Sr){sub 2}TiSi{sub 2}O{sub 8} titano-silicate fresnoites delivers finely divided precursors for applications as diverse as solid electrolytes and photocatalysis that exploit the unique Ti-O and Si-O bonding and structural morphology of these materials. Highlights: Black-Right-Pointing-Pointer A Pechini method for synthesizing (Ba,Sr){sub 2}TiSi{sub 2}O{sub 8} fresnoites is demonstrated. Black-Right-Pointing-Pointer The method minimizes a persistent glassy intermediate phase. Black-Right-Pointing-Pointer The Pechini process is generally applicable for tailoring fresnoites as functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trimethylamine sensing properties of graphene quantum Dots/α-Fe{sub 2}O{sub 3} composites

Graphene quantum dots (GQDs) were prepared by pyrolysis of citric acid. The sizes of the as-prepared GQDs were in the range of 2–4 nm. The GQDs/α-Fe{sub 2}O{sub 3} composites were prepared by loading GQDs with α-Fe{sub 2}O{sub 3} via a one-step facile hydrothermal method. The GQDs/α-Fe{sub 2}O{sub 3} composites were characterized by XRD, TGA, FTIR, Raman, SEM and TEM, respectively. The sensor devices were fabricated using the GQDs/α-Fe{sub 2}O{sub 3} composites as sensing materials. The effect of the amount of GQDs in the composites on the gas-sensing responses of the materials and the gas-sensing selectivity was investigated. The experimental results revealed that the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite exhibited high sensitivity and good selectivity to TMA vapor. The responses of the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite to 1000 ppm and 0.01 ppm TMA vapor attained 1033.0 and 1.9 at 270 °C, respectively. The response time and recovery time for 0.01 ppm TMA vapor were only 6 s and 4 s, respectively. - Graphical abstract: (1) The sizes of the GQDs are in the range of 2–5 nm; (2) The responses of the sensor based on GQDs/α-Fe{sub 2}O{sub 3} (S-15) composite to 0.01, 0.1, 1, 10, 100 and 1000 ppm TMA vapor at 270 °C are 1.9, 2.9, 5.5, 15.4, 293.0 and 1033.0, respectively, and the detection limit can reach 0.01 ppm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proteomes reveal metabolic capabilities of Yarrowia lipolytica for biological upcycling of polyethylene into high-value chemicals

ABSTRACT Polyolefins derived from plastic wastes are recalcitrant for biological upcycling. However, chemical depolymerization of polyolefins can generate depolymerized plastic (DP) oil, comprising of a complex mixture of saturated, unsaturated, even, and odd hydrocarbons suitable for biological conversion. While DP oil contains a rich carbon and energy source, it is inhibitory to cells. Understanding and harnessing robust metabolic capabilities of microorganisms to upcycle the hydrocarbons in DP oil, both naturally and unnaturally occurring, into high-value chemicals are limited. Here, we discovered that an oleaginous yeast, Yarrowia lipolytica, undergoing short-term adaptation to DP oil robustly utilized a wide range of hydrocarbons for cell growth and production of citric acid and neutral lipids. When growing on hydrocarbons, Y. lipolytica partitioned into planktonic and oil-bound cells with each exhibiting distinct proteomes and amino acid distributions invested in establishing these proteomes. Significant proteome reallocation toward energy and lipid metabolism, belonging to 2 of the 23 Eukaryotic Orthologous Groups classes C and I, enabled robust growth of Y. lipolytica on hydrocarbons, with n-hexadecane as the preferential substrate. This investment was even higher for growth on DP oil where classes C and I were ranked one and two, respectively, and many associated proteins and pathways were expressed and upregulated including the hydrocarbon degradation pathway, Krebs cycle, glyoxylate shunt and, unexpectedly, propionate metabolism. However, a reduction in proteome allocation for protein biosynthesis, at the expense of the observed increase toward energy and lipid metabolisms, might have caused the inhibitory effect of DP oil on cell growth. IMPORTANCE Sustainable processes for biological upcycling of plastic wastes in a circular bioeconomy are needed to promote decarbonization and reduce environmental pollution due to increased plastic consumption, incineration, and landfill storage. Strain characterization and proteomic analysis revealed the robust metabolic capabilities of Yarrowia lipolytica to upcycle polyethylene into high-value chemicals. Significant proteome reallocation toward energy and lipid metabolisms was required for robust growth on hydrocarbons with n-hexadecane as the preferential substrate. However, an apparent over-investment in these same categories to utilize complex depolymerized plastic (DP) oil came at the expense of protein biosynthesis, limiting cell growth. Taken together, this study elucidates how Y. lipolytica activates its metabolism to utilize DP oil and establishes Y. lipolytica as a promising host for the upcycling of plastic wastes.

1-alkenes↗

Synthesis, phase composition modification, and optical properties of Ce{sup 3+}/Tb{sup 3+} activated KGdF{sub 4} and GdF{sub 3} submicrocrystals

Ce{sup 3+}/Tb{sup 3+} co-doped series of samples have been synthesized based on a citric acid assisted hydrothermal method. By controlling the hydrothermal treating time, the samples evolve from the Ce{sup 3+}/Tb{sup 3+} co-doped cubic phase KGdF{sub 4} with spherical morphology into the Ce{sup 3+}/Tb{sup 3+} co-doped orthorhombic phase GdF{sub 3} with rhombic shape finally. The X-ray diffraction data illustrate the phase composition modification process of the samples. The field emission scanning electron microscopy and the transmission electron microscopy images suggest the transformation in the morphology of final products. The spectra of the energy-dispersive spectroscopy reveal the constituents of the samples. And the selected area electronic diffraction patterns prove the crystalline phases of the samples. Based on previous studies and the experimental data, one possible phase composition modification process has been summarized. The photoluminescence excitation and emission spectra and the luminescent dynamic decay curves demonstrate the variations in optical properties of the Ce{sup 3+}/Tb{sup 3+} co-doped final products. - Graphical abstract: Schematic illustration for the phase composition modification from the Ce{sup 3+}/Tb{sup 3+} doped KGdF{sub 4} to the Ce{sup 3+}/Tb{sup 3+}doped GdF{sub 3} with multiform morphologies and different sizes. (C presents cubic phase, H presents hexagonal phase, and O presents orthorhombic phase.) Highlights: Black-Right-Pointing-Pointer The samples were synthesized by a hydrothermal method. Black-Right-Pointing-Pointer The samples evolved from the cubic phase KGdF{sub 4} into the orthorhombic phase GdF{sub 3}. Black-Right-Pointing-Pointer The morphology evolved from the spherical shape into the rhombic shape finally. Black-Right-Pointing-Pointer A possible phase composition modification process was summarized. Black-Right-Pointing-Pointer The optical properties of final products were compared and studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods of producing succinic acid from a biomass

A method of producing succinic acid from a biomass. The method comprises adding citric acid to a biomass comprising microalgae to form an acidified microalgae composition. The acidified microalgae biomass composition is stored under anaerobic conditions without inoculating the acidified microalgae composition with bacteria formulated to produce succinic acid. A coproduct comprising succinic acid is produced. Other methods of producing succinic acid from a biomass are also disclosed.

Wendt, Lynn M.↗

Transcriptome and metabolome integration in sugarcane through culm development

Abstract Sugarcane (Saccharum sp.) is a tropical and subtropical C4 plant with a high photosynthetic and carbon assimilation efficiency that stores sucrose. Culm biomass is also composed of bagasse fibre, a by‐product of the sugarcane industry. This high‐yielding grass, high in sucrose and lignocellulosic biomass, is considered an optimal feedstock as an alternative to fossil fuels and to produce a broad range of high‐value biomaterials. The ideal sugarcane production system would optimise the relative production of sugar and these new products. Multi‐omics correlation analysis was used to generate a global view of the essential metabolic pathways identifying critical genes involved in carbon partitioning during different stages of development. This research employed an unprecedented metabolic and transcriptomic dataset of 360 samples from a selection of 1440 culms of 24 genotypes at five different development stages. Chemical composition and metabolome analysis showed an increase through the culm development of lignin, sucrose, carbon, and amino acids such as aspartic acid, serine, alanine, methionine, threonine 3‐cyano‐L‐alanine, and citric acid. Transcriptome analysis revealed functionalities such as transcription, nucleotide transport and metabolism, and the biosynthesis of amino acids that are highly activated during the immature stage and highly down‐regulated during the most mature age.

Perlo, Virginie↗

OH-initiated heterogeneous aging of highly oxidized organic aerosol

The oxidative evolution (“aging”) of organic species in the atmosphere is thought to have a major influence on the composition and properties of organic particulate matter, but remains poorly understood, particularly for the most oxidized fraction of the aerosol. Here we measure the kinetics and products of the heterogeneous oxidation of highly oxidized organic aerosol, with an aim of better constraining such atmospheric aging processes. Submicron particles composed of model oxidized organics—1,2,3,4-butanetetracarboxylic acid (C{sub 8}H{sub 10}O{sub 8}), citric acid (C{sub 6}H{sub 8}O{sub 7}), tartaric acid (C{sub 4}H{sub 6}O{sub 6}), and Suwannee River fulvic acid—were oxidized by gas-phase OH in a flow reactor, and the masses and elemental composition of the particles were monitored as a function of OH exposure. In contrast to our previous studies of less-oxidized model systems (squalane, erythritol, and levoglucosan), particle mass did not decrease significantly with heterogeneous oxidation. Carbon content of the aerosol always decreased somewhat, but this mass loss was approximately balanced by an increase in oxygen content. The estimated reactive uptake coefficients of the reactions range from 0.37 to 0.51 and indicate that such transformations occur at rates corresponding to 1-2 weeks in the atmosphere, suggesting their importance in the atmospheric lifecycle of organic particulate matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Saprotrophic Fungus Induces Microscale Mineral Weathering to Source Potassium in a Carbon-Limited Environment

Plants rely on potassium for many critical biological processes, but most soils are potassium limited. Moving potassium from the inaccessible, mineral-bound pool to a more bioavailable form is crucial for sustainably increasing local potassium concentrations for plant growth and health. Here, we use a synthetic soil habitat (mineral doped micromodels) to study and directly visualize how the saprotrophic fungus, Fusarium sp. DS 682, weathers K-rich soil minerals. After 30 days of fungal growth, both montmorillonite and illite (secondary clays) had formed as surface coatings on primary K-feldspar, biotite, and kaolinite grains. The distribution of montmorillonite differed depending on the proximity to a carbon source, where montmorillonite was found to be associated with K-feldspar closer to the carbon (C) source, which the fungus was inoculated on, but associated with biotite at greater distances from the C source. The distribution of secondary clays is likely due to a change in the type of fungal exuded organic acids; from citric to tartaric acid dominated production with increasing distance from the C source. Thus, the main control on the ability of Fusarium sp. DS 682 to weather K-feldspar is proximity to a C source to produce citric acid via the TCA cycle.

54 ENVIRONMENTAL SCIENCES↗

Efficient separation and coprecipitation for simplified cathode recycling

Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.

25 ENERGY STORAGE↗

Organic compounds alter the preference and rates of heavy metal adsorption on ferrihydrite

The availability of heavy metals in terrestrial environments is largely controlled by their interactions with minerals and organic matter, with iron minerals having a particularly strong role in heavy metal fate. Because soil organic matter contains a variety of compounds that differ in their chemical properties, the underlying impact organic matter-soil mineral associations bestow on heavy metal binding is still unresolved. Here, we systematically examine the binding of Cd, Zn and Ni by a suite of organic-ferrihydrite assemblages, chosen to account for various compound chemistries within soil organic matter. We posited that organic compound functionality would dictate the extent of association with the organic-ferrihydrite assemblages. Increased heavy metal binding to the assemblages was observed and attributed to the introduction of additional binding sites by the organic functional groups with differing metal affinities. Furthermore, the relative increase depended on the metal's Lewis acidity and followed the order Cd > Zn > Ni, whereas the reverse order was obtained for metal binding by pristine ferrihydrite (Ni > Zn > Cd). Citric acid-, aspartic acid- and cysteine-ferrihydrite assemblages also enhanced the metal binding rate. X-ray absorption spectroscopy revealed that the organic coating contributed significantly to Zn binding by the assemblages, despite relatively low organic surface coverage. Our findings provide valuable information on the nature of heavy metal-organic-mineral interactions and metal adsorption processes regulating their bioavailability and transport.

54 ENVIRONMENTAL SCIENCES↗

Myocardial Reloading after Extracorporeal Membrane Oxygenation Alters Substrate Metabolism While Promoting Protein Synthesis

Extracorporeal membrane oxygenation (ECMO) unloads the heart providing a bridge to recovery in children after myocardial stunning. Mortality after ECMO remains high.Cardiac substrate and amino acid requirements upon weaning are unknown and may impact recovery. We assessed the hypothesis that ventricular reloading modulates both substrate entry into the citric acid cycle (CAC) and myocardial protein synthesis. Fourteen immature piglets (7.8-15.6 kg) were separated into 2 groups based on ventricular loading status: 8 hour-ECMO (UNLOAD) and post-wean from ECMO (RELOAD). We infused [2-13C]-pyruvate as an oxidative substrate and [13C6]-L-leucine, as a tracer of amino acid oxidation and protein synthesis into the coronary artery. RELOAD showed marked elevations in myocardial oxygen consumption above baseline and UNLOAD. Pyruvate uptake was markedly increased though RELOAD decreased pyruvate contribution to oxidative CAC metabolism.RELOAD also increased absolute concentrations of all CAC intermediates, while maintaining or increasing 13C-molar percent enrichment. RELOAD also significantly increased cardiac fractional protein synthesis rates by >70% over UNLOAD. Conclusions: RELOAD produced high energy metabolic requirement and rebound protein synthesis. Relative pyruvate decarboxylation decreased with RELOAD while promoting anaplerotic pyruvate carboxylation and amino acid incorporation into protein rather than to the CAC for oxidation. These perturbations may serve as therapeutic targets to improve contractile function after ECMO.

Environmental Molecular Sciences Laboratory↗

Quorum-driven microbial consortium for Bioplastic production from agro-waste

Microbial consortia have high relevance in natural environments. Here we present the production of polyhydroxyalkanoates (PHA) from agro-industrial residues by a synthetic interkingdom consortium formed by the saprotrophic fungus Ophiostoma piceae CECT 20146, which encodes a wide range of lignocellulolytic enzymes, and a natural PHA producer, Pseudomonas putida KT2440. Two agro-industrial residues were utilized: Brewer's Spent Grain (BSG) as a carbon/nitrogen source and biofilm scaffold and waste cooking oil (WCO) as a carbon source for PHA synthesis. Through biochemistry, microscopy, and omics analyses, it is shown that P. putida accumulates up to 40.2% of intracellular PHA when the quorum sensing molecule, farnesol (naturally produced by O. piceae) is added, thanks to the increased proliferation of P. putida cells. An interactive Shiny application has also been developed for an easy visualization and comprehension of all the transcriptomics and metabolomics data: https://jgf-bioinformatics.shinyapps.io/Visualization_app/. These results support the increased PHA production of the consortium by an induction of gene phaG, which redirects intermediaries of the fatty acid biosynthesis to PHA precursors, and the repression of the PHA depolymerase phaZ in P. putida. The trophic interaction between microorganisms seems to rely on the citric acid produced by O. piceae and the glycerol liberated from WCO, which can both be consumed by P. putida. Bioreactor scale-up experiments allowed a 3.3-fold increase in the PHA concentration in the consortium (6.7 g·L-1) without pretreatment or sterilization of the substrates, laying the groundwork for the implementation of an industrial consolidated bioprocess (CBP).

Bacteria↗