Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bipolar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Fabrication and high temperature characteristics of ion-implanted GaAs bipolar transistors and ring-oscillators

Ion implantation techniques that permit the reproducible fabrication of bipolar GaAs integrated circuits are studied. A 15 stage ring oscillator and discrete transistor were characterized between 25 and 400 C. The current gain of the transistor was found to increase slightly with temperature. The diode leakage currents increase with an activation energy of approximately 1 eV and dominate the transistor leakage current 1 sub CEO above 200 C. Present devices fail catastrophically at about 400 C because of Au-metallization.

Doerbeck, F. H.↗

A gallium phosphide high-temperature bipolar junction transistor

Preliminary results are reported on the development of a high temperature (350 C) gallium phosphide bipolar junction transistor (BJT) for geothermal and other energy applications. This four-layer p(+)n(-)pp(+) structure was formed by liquid phase epitaxy using a supercooling technique to insure uniform nucleation of the thin layers. Magnesium was used as the p-type dopant to avoid excessive out-diffusion into the lightly doped base. By appropriate choice of electrodes, the device may also be driven as an n-channel junction field-effect transistor. The initial design suffers from a series resistance problem which limits the transistor's usefulness at high temperatures.

Zipperian, T. E.↗

A prediction model for bipolar RAMs in a high energy ion/proton environment

A model has been developed which predicts the relative susceptibility of bipolar RAMs to heavy ion and proton upset. During the course of evaluating this model, physical and electrical variations were also evaluated indicating that the minimum internal signal level is the primary upset susceptibility indicator. Unfortunately, all of the physical and electrical variations expected during a normal product development cycle are in direct opposition to improved high-energy particle upset tolerance. Hence, a trade-off between highly susceptible, low power (medium speed) devices must be made against the less susceptible, higher power (high speed) equivalent device, taking into account the systems trade-off with respect to system power, software, error correction procedures and/or circuit redundancy.

Myers, D. K.↗

Monolithic integration of a GaAlAs buried-heterostructure laser and a bipolar phototransistor

A GaAlAs buried-heterostructure laser has been monolithically integrated with a bipolar phototransistor. The heterojunction transistor was formed by the regrowth of the burying layers of the laser. Typical threshold current values for the lasers were 30 mA. Common-emitter current gains for the phototransistor of 100-400 and light responsitivity of 75 A/W (for wavelengths of 0.82 micron) at collector current levels of 15 mA were obtained.

Bar-Chaim, N.↗

The coronal field lines of an evolving bipolar magnetic region

A simple potential field model is presented to illustrate that loops of magnetic flux rise upward through the corona during the relatively short growth phase of a bipolar magnetic region but contract back to the sun's surface during the much longer decay phase of the photospheric region. To reconcile this behavior with the unidirectional, solar-wind-driven convection of flux outward from the sun, one must postulate the existence of an X-type neutral line in the middle corona where open field lines can be converted back to closed ones.

Sheeley, N. R., Jr.↗

Test results of a ten cell bipolar nickel-hydrogen battery

A ten cell bipolar nickel hydrogen 6.5 ampere-hour battery demonstrated over 2000 low Earth orbit cycles at an 80 percent depth-of-discharge. Charge/discharge cyclic ampere-hour and watt-hour efficiencies of 88 and 76 percent, respectively, observed. Peak power capability was determined at 1.1 kW. A 10C discharge rate yields 83 percent of the nominal stark capacity to the 1.0 volt cut off in just under 6 minutes.

Cataldo, R. L.↗

Optical study of a possible bipolar flow associated with Herbig-Haro 12

The region near HH 12 in NGC 1333 has been imaged at V, R, I, and H-alpha using the CCD detector at the Kitt Peak National Observatory 0.9 m telescope. The H-alpha frame reveals a narrow, sinuous structure which extends over a projected distance of 0.3 pc and which emanates from a star which appears to be a T Tauri object of type M0-M2. Velocities along this structure were obtained both north and south of the star. The morphology of this structure as well as the measured velocities suggest that it may be an optical manifestation of a highly collimated bipolar outflow which excites the object heretofore identified as HH 12.

Strom, K. M.↗

Recent work on bipolar nebulae

The results of recent studies of bipolar nebulae (BPN) using nebular-polarization mapping, spectropolarimetry, near-IR spectroscopy, far-IR photometry, and radio-maser and continuum observations are surveyed. The characteristics of several BPN of different evolutionary types are discussed and illustrated with spectra, model drawings, and maps. As shown in a Hertzsprung-Russell diagram of 19 BPN, this morphological class includes pre-main-sequence stars, red giants in transition to ordinary planetary nebulae, pre-white-dwarfs, a dust-shrouded carbon star, and a visual binary with a type-O primary. VLA 6-cm observations of the latter object, MWC 349, reveal a morphology similar to the optical structure of the Red Rectangle illuminated by HD 44179: it is suggested that equatorial dusty tori may occur commonly at different phases of stellar evolution, and hence that BPN may be relatively abundant, although short-lived, phenomena.

Cohen, M.↗

A 37.5-kW point design comparison of the nickel-cadmium battery, bipolar nickel-hydrogen battery, and regenerative hydrogen-oxygen fuel cell energy storage subsystems for low Earth orbit

Nickel-cadmium batteries, bipolar nickel-hydrogen batteries, and regenerative fuel cell storage subsystems were evaluated for use as the storage subsystem in a 37.5 kW power system for space station. Design requirements were set in order to establish a common baseline for comparison purposes. The storage subsystems were compared on the basis of effective energy density, round trip electrical efficiency, total subsystem weight and volume, and life.

Manzo, M. A.↗

Design of a 1-kWh bipolar nickel hydrogen battery

The design of a nickel hydrogen battery utilizing bipolar construction in a common pressure vessel is discussed. Design features are as follows: 40 ampere-hour capcity, 1 kWh stored energy as a 24 cell battery, 1.8 kW delivered in a LEO Cycle and maximum pulse power of 18.0 kW.

Cataldo, R. L.↗

Teardown analysis of a ten cell bipolar nickel-hydrogen battery

Design studies have identified bipolar nickel-hydrogen batteries as an attractive storage option for high power, high voltage applications. A pre-prototype Ni-H2 battery was designed, assembled and tested in the early phases of a concept verification program. The initial stack was built with available hardware and components from past programs. The stack performed well. After 2000 low-earth-orbit cycles the stack was dismantled in order to allow evaluation and analysis of the design and components. The results of the teardown analysis and recommended modifications are discussed.

Manzo, M. A.↗

Far-infrared and submillimeter observations of the low-luminosity protostars L1455 FIR and L1551 IRS 5 - The confinement of bipolar outflows

Far-IR observations of L1455 FIR and L1551 IRS 5 obtained in December, 1981, and in September, 1982, and January, 1983, respectively, using the H-1 and G-2 bolometer systems on the 91-cm telescope of the NASA Kuiper Aiborne Observatory are reported. Additional observations at 400 microns were obtained with UKIRT in November, 1981, (L1551) and with NASA IRTF in November, 1982 (L1455). The results are presented in tables and graphs, and L1455 and L1551 are compared with other objects in terms of central-star parameters, clouds, and overflows. The characteristics calculated for L1455 and L1551 include luminosity 1.5 and 23 solar luminosity, size less than 7 x 10 to the 16th cm, H2 density greater than or equal to 4 x 10 to the 5th and 1 x 10 to the 6th/cu cm, and 35-K dust cores of 0.2 and 0.7 solar mass, respectively. The bipolar appearance of the L1551 outflow is attributed to circumstellar material only.

Davidson, J. A.↗

Test results of a ten cell bipolar nickel-hydrogen battery

A ten cell bipolar nickel hydrogen 6.5 ampere-hour battery demonstrated over 2000 low earth orbit cycles at an 80 percent depth-of-discharge. Charge/discharge cyclic ampere-hour and watt-hour efficiencies of 88 and 76 percent, respectively, observed. Peak power capability was determined at 1.1 kW. A 10C discharge rate yields 83 percent of the nominal stark capacity to the 1.0 volt cut off in just under 6 minutes. Previously announced in STAR as N83-26253

Cataldo, R. L.↗

The distribution of shocked gas in the bipolar nebulae CRL 2688 and CRL 618

Maps of the H2 emission from the bipolar nebulae CRL 2688 and CRL 618 are presented, along with a map of the 2.1-micron continuum emission from CRL 2688. The H2 emission is seen in the direction of the lobes of each nebula and not in between the lobes. From the distribution of the H2 and continuum emission, it is argued that the H2 is excited in shock waves produced in the lobes of the visible nebulae by fast winds from the central stars which overtake slower moving material lost in a slow wind during the red-giant phase of each object. These shocks may be similar to those seen in Herbig-Haro objects. The mass-loss rates for the fast winds in each object are estimated from the H2 data, and a brief discussion is given of the origin of these winds.

Gatley, I.↗

Do bipolar magnetic regions exist on the surfaces of early-type stars?

The observations of relatively narrow absorption components of the UV resonance lines in the spectra of early-type stars are reviewed, and some new observational data are presented for Rho Leo (B1 Ib). It is shown that the discrete components which are seen in the UV resonance lines of early-type stars are a result of ejection from local spots above the photospheres of hot stars. It is suggested that localized ejection is caused by magnetic flux lines associated with a bipolar magnetic region on the surface of the star.

Underhill, A. B.↗

NGC 6334-V - An infrared bipolar nebula

High angular resolution infrared mapping of the enigmatic far-infrared source NGC 6334-V shows it to have a bipolar structure at 1-4 microns. This structure together with the near-infrared colors and previous observations of H2 emission suggests a model for the source (IRS 4) in which a single luminous star is embedded in a dust cloud with a disklike geometry. Photometry of near-infrared sources within 0.5 pc of IRS 4 is also presented. These data suggest that there are at least four lower luminosity members of a young, dense cluster associated with the dominant source.

Harvey, P. M.↗

Bipolar nickel-hydrogen battery design

The initial design for the NASA-Lewis advanced nickel-hydrogen battery is discussed. Fabrication of two 10-cell boilerplate battery stacks will soon begin. The test batteries will undergo characterization testing and low Earth orbit life cycling. The design effectively deals with waste heat generated in the cell stack. Stack temperatures and temperature gradients are maintained to acceptable limits by utilizing the bipolar conduction plate as a heat path to the active cooling fluid panel external to the edge of the cell stack. The thermal design and mechanical design of the battery stack together maintain a materials balance within the cell. An electrolyte seal on each cell frame prohibits electrolyte bridging. An oxygen recombination site and electrolyte reservoir/separator design does not allow oxygen to leave the cell in which it was generated.

Koehler, C. W.↗

An infrared study of the bipolar outflow region GGD 12-15

Infrared observations from 1 to 100 microns are presented for the region associated with a bipolar CO outflow source near the nebulous objects GGD 12 to 15. A luminous far-infrared source was found associated with a radio-continuum source in the area. This object appears to be a compact HII region around a nearly main-sequence BO star. A faint 20 micron source was also discovered at the position of an H2O maser 30 deg northwest of the HII region. This object appears to be associated with but not coincident with a 2 micron reflection nebula. This structure serves as evidence for a non-spherically symmetric, possibly disk-like dust distribution around the exciting star for the maser. This object probably powers the bi-polar CO outflow although its luminosity is less than 10 percent that of the star which excites the compact HII region. A number of other 2 micron sources found in the area are probably members of a recently formed cluster.

Harvey, P. M.↗