Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Atom probe tomography study of internal interfaces in Cu{sub 2}ZnSnSe{sub 4} thin-films

We report on atom probe tomography studies of the composition at internal interfaces in Cu{sub 2}ZnSnSe{sub 4} thin-films. For Cu{sub 2}ZnSnSe{sub 4} precursors, which are deposited at 320 °C under Zn-rich conditions, grain boundaries are found to be enriched with Cu irrespective of whether Cu-poor or Cu-rich growth conditions are chosen. Cu{sub 2}ZnSnSe{sub 4} grains are found to be Cu-poor and excess Cu atoms are found to be accumulated at grain boundaries. In addition, nanometer-sized ZnSe grains are detected at or near grain boundaries. The compositions at grain boundaries show different trends after annealing at 500 °C. Grain boundaries in the annealed absorber films, which are free of impurities, are Cu-, Sn-, and Se-depleted and Zn-enriched. This is attributed to dissolution of ZnSe at the Cu-enriched grain boundaries during annealing. Furthermore, some of the grain boundaries of the absorbers are enriched with Na and K atoms, stemming from the soda-lime glass substrate. Such grain boundaries show no or only small changes in composition of the matrix elements. Na and K impurities are also partly segregated at some of the Cu{sub 2}ZnSnSe{sub 4}/ZnSe interfaces in the absorber, whereas for the precursors, only Na was detected at such phase boundaries possibly due to a higher diffusivity of Na compared to K. Possible effects of the detected compositional fluctuations on cell performance are discussed.

36 MATERIALS SCIENCE↗

Aberration corrected scanning transmission electron microscopy and electron energy loss spectroscopy studies of epitaxial Fe/MgO/(001)Ge heterostructures

Aberration correction in the scanning transmission electron microscope combined with electron energy loss spectroscopy allows simultaneous mapping of the structure, the chemistry and even the electronic properties of materials in one single experiment with spatial resolutions of the order of one Angstrom. Here the authors will apply these techniques to the characterization of epitaxial Fe/MgO/(001)Ge and interfaces with possible applications for tunneling junctions, and the authors will show that epitaxial MgO films can be grown on a (001)Ge substrates by molecular beam epitaxy and how it is possible to map the chemistry of interfaces with atomic resolution. Epitaxial growth of insulator oxides on semiconductors constitutes a key issue within the field of electronics, and a considerably large effort has been devoted to harness the growth of high-k oxides on Si. Ge, due to its high electronic and hole mobility, is a very interesting alternative as a potential substrate for future high performance complementary metal-oxide-semiconductor field-effect transistors. However, a major issue is to avoid the high resistivity at the source and drain contacts ensuing from the pinning of the Fermi level at the valence-band maximum. It has been suggested that this problem could be fixed by depositing a thin insulating tunneling barrier between the Ge substrate and the metal contacts. In this case, single crystal epitaxy would represent an additional benefit, since it would lead to a reduction of interfacial defects and improved performance of the tunneling barrier. MgO has been suggested to fulfill such requisites. Furthermore, MgO has been demonstrated to be a good substrate for epitaxial growth of transition metals thin films, such as Fe and Co, thus avoiding the potential problem of chemical reactivity with Ge. In such a scenario, epitaxial deposition of high quality MgO films on Ge substrates is highly desirable. But in addition, successful epitaxial growth of MgO on a semiconductor would also constitute a plus for applications in spintronics, since the injection of a spin polarized current from a ferromagnetic electrode to a non-magnetic semiconductor requires the presence of a potential barrier. MgO represents a convenient choice because the symmetry filtering properties at the interface with transition metals would allow an efficient spin filtering effect. For this approach to succeed, a suitable semiconducting substrate where MgO can be grown epitaxially must be found. And again, while GaAs and Si have been investigated for such role, Ge has not received much attention so far. In this study the authors report on the atomic resolution characterization of high quality interfaces in Fe/MgO/(001)Ge heterostructures. The study of the defects, the inhomogeneities and the interface structure of such junctions is a must to pave the way toward future applications. For this aim, the combination of scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) is a most useful tool, since it allows these features to be probed with atomic resolution. Spherical aberration correction in the STEM allows for increased contrast, allowing even single atoms to be detected both in imaging and spectroscopy.

36 MATERIALS SCIENCE↗

Constructing hierarchical interfaces: TiO 2 -supported PtFe-FeO x nanowires for room temperature CO oxidation

This is a report of a facile approach to constructing catalytic active hierarchical interfaces in one-dimensional (1D) nanostructure, exemplified by the synthesis of TiO 2 -supported PtFe–FeO x nanowires (NWs). The hierarchical interface, constituting atomic level interactions between PtFe and FeO x within each NW and the interactions between NWs and support (TiO 2 ), enables CO oxidation with 100% conversion at room temperature. We identify the role of the two interfaces by probing the CO oxidation reaction with isotopic labeling experiments. Both the oxygen atoms (Os) in FeO x and TiO 2 participate in the initial CO oxidation, facilitating the reaction through a redox pathway. Moreover, the intact 1D structure leads to the high stability of the catalyst. After 30 h in the reaction stream, the PtFe–FeO x /TiO2 catalyst exhibits no activity decay. These results provide a general approach and new insights into the construction of hierarchical interfaces for advanced catalysis.

36 MATERIALS SCIENCE↗

Atomic layer deposition for membrane interface engineering

In many applications, interfaces govern the performance of membranes. Structure, chemistry, electrostatics, and other properties of interfaces can dominate the selectivity, flux, fouling resistance, and other critical aspects of membrane functionality. Control over membrane interfacial properties, therefore, is a powerful means of tailoring performance. In this minireview, we discuss the application of atomic layer deposition (ALD) and related techniques in the design of novel membrane interfaces. We discuss recent literature in which ALD is used to 1) modify the surface chemistry and interfacial properties of membranes, 2) tailor the pore sizes and separation characteristics of membranes, and 3) enable novel advanced functional membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Protocols Suitable for Atomic-Scale Imaging of Catalyst Clusters at Catalytic Temperatures

Recent advances in aberration corrected electron microscopy (ACEM) are providing new tools and opportunities for studying chemical processes at gas-solid interfaces at atomic resolutions. In the area of heterogeneous catalysis, STEM-based high-angle annular dark-field imaging (HAADF) has provided the potential for direct observation of single heavy atoms and atom clusters. [1]. This approach has been used to study catalytic properties by directly probing structure development as a result of metal particle-substrate interactions, and used to explore the combined effects of temperature, promoters, and organic ligands on the evolution of catalyst structure [2- 3]. Associated with this new tool is the potential for artifacts, such as electron beam-induced polymerization of organic components [4], and the influence of the electron beam on heavy atom diffusion and nanostructuring [5]. Experiments were conducted in order to develop sample preparation techniques and imaging protocols that are suitable for achieving sub- ngstr m resolutions at ambient temperatures. In-situ heating studies were also conduct using AduroTM heater devices manufactured using MEMS technology by Protochips Inc. (Raleigh, NC) [6].

atomic-scale imaging↗

The approach to equilibrium during tempering of a bulk nanocrystalline steel: an atom probe investigation

A local electrode atom probe has been used to analyze the solute partitioning during bainite transformation in a novel, nanocrystalline bainitic steel. Atom probe results show the absence of any partitioning of substitutional elements between the phases involved. The results are fully consistent with the diffusionless transformation of austenite to bainite. However, substitutional elements are expected to redistribute approaching an equilibrium phase boundary as the mixture of bainitic ferrite and retained austenite is tempered. The compositional analysis of the austenite/ferrite interface by atom probe tomography indicates that retained austenite decomposes during tempering before equilibrium is reached at the interface.

36 MATERIALS SCIENCE↗

Depth-resolved charge reconstruction at the LaNi O 3 / CaMn O 3 interface

Here, rational design of low-dimensional electronic phenomena at oxide interfaces is currently considered to be one of the most promising schemes for realizing new energy-efficient logic and memory devices. An atomically abrupt interface between paramagnetic LaNiO 3 and antiferromagnetic CaMnO 3 exhibits interfacial ferromagnetism, which can be tuned via a thickness-dependent metal-insulator transition in LaNiO 3 . Once fully understood, such emergent functionality could turn this archetypal Mott-interface system into a key building block for the above-mentioned future devices. Here, we use depth-resolved standing-wave photoemission spectroscopy in conjunction with scanning transmission electron microscopy and x-ray absorption spectroscopy, to demonstrate a depth-dependent charge reconstruction at the LaNiO 3 /CaMnO 3 interface. Our measurements reveal an increased concentration of Mn 3+ and Ni 2+ cations at the interface, which create an electronic environment favorable for the emergence of interfacial ferromagnetism mediated via the Mn 4+ -Mn 3+ ferromagnetic double exchange and Ni 2+ -O-Mn 4+ superexchange mechanisms. Our findings suggest a strategy for designing functional Mott oxide heterostructures by tuning the interfacial cation characteristics via controlled manipulation of thickness, strain, and ionic defect states.

36 MATERIALS SCIENCE↗

Three-dimensional atomic scale electron density reconstruction of octahedral tilt epitaxy in functional perovskites

Octahedral tilts are the most ubiquitous distortions in perovskite-related structures that can dramatically influence ferroelectric, magnetic, and electronic properties; yet the paradigm of tilt epitaxy in thin films is barely explored. Non-destructively characterizing such epitaxy in three-dimensions for low symmetry complex tilt systems composed of light anions is a formidable challenge. Here we demonstrate that the interfacial tilt epitaxy can transform ultrathin calcium titanate, a non-polar earth-abundant mineral, into high-temperature polar oxides that last above 900 K. The comprehensive picture of octahedral tilts and polar distortions is revealed by reconstructing the three-dimensional electron density maps across film-substrate interfaces with atomic resolution using coherent Bragg rod analysis. The results are complemented with aberration-corrected transmission electron microscopy,film superstructure reflections, and are in excellent agreement with density functional theory. Conclusively, the study could serve as a broader template for non-destructive, three-dimensional atomic resolution probing of complex low symmetry functional interfaces.

36 MATERIALS SCIENCE↗

Magneto-electric coupling in antiferromagnet/ferroelectric Mn{sub 2}Au/BaTiO{sub 3} interface

Within the crucial issue of the electric field control of magnetism, the use of antiferromagnets (AFMs) coupled to ferroelectrics is much less explored than the ferromagnets counterpart, although the first choice might lead to better performances and larger stability with respect to external perturbations (such as magnetic fields). Here, we explore the possibility to control the magnetic anisotropy of a Mn{sub 2}Au layer by reversing the ferroelectric polarization of BaTiO{sub 3} in Mn{sub 2}Au/BaTiO{sub 3} interfaces. By means of a thorough exploration of many possible geometry configurations, we identify the two most stable, corresponding to compressive and tensile strain at the interface. The first appears to be easy-axis, while the second—easy-plane—with a large induced moment on the interface Ti atom. The reversal of ferroelectric polarization changes the anisotropy by approximately 50%, thus paving the way to the control of AFM properties with an electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum information with Rydberg atoms

Rydberg atoms with principal quantum number n>>1 have exaggerated atomic properties including dipole-dipole interactions that scale as n{sup 4} and radiative lifetimes that scale as n{sup 3}. It was proposed a decade ago to take advantage of these properties to implement quantum gates between neutral atom qubits. The availability of a strong long-range interaction that can be coherently turned on and off is an enabling resource for a wide range of quantum information tasks stretching far beyond the original gate proposal. Rydberg enabled capabilities include long-range two-qubit gates, collective encoding of multiqubit registers, implementation of robust light-atom quantum interfaces, and the potential for simulating quantum many-body physics. The advances of the last decade are reviewed, covering both theoretical and experimental aspects of Rydberg-mediated quantum information processing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coherent heteroepitaxy of Bi{sub 2}Se{sub 3} on GaAs (111)B

We report the heteroepitaxy of single crystal thin films of Bi{sub 2}Se{sub 3} on the (111)B surface of GaAs by molecular beam epitaxy. We find that Bi{sub 2}Se{sub 3} grows highly c-axis oriented, with an atomically sharp interface with the GaAs substrate. By optimizing the growth of a very thin GaAs buffer layer before growing the Bi{sub 2}Se{sub 3}, we demonstrate the growth of thin films with atomically flat terraces over hundreds of nanometers. Initial time-resolved Kerr rotation measurements herald opportunities for probing coherent spin dynamics at the interface between a candidate topological insulator and a large class of GaAs-based heterostructures.

36 MATERIALS SCIENCE↗

Three-dimensional atomic force microscopy mapping at the solid-liquid interface with fast and flexible data acquisition

We present the implementation of a three-dimensional mapping routine for probing solid-liquid interfaces using frequency modulation atomic force microscopy. Our implementation enables fast and flexible data acquisition of up to 20 channels simultaneously. The acquired data can be directly synchronized with commercial atomic force microscope controllers, making our routine easily extendable for related techniques that require additional data channels, e.g., Kelvin probe force microscopy. Moreover, the closest approach of the tip to the sample is limited by a user-defined threshold, providing the possibility to prevent potential damage to the tip. The performance of our setup is demonstrated by visualizing the hydration structure above the calcite (10.4) surface in water.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atomically Local Electric Field Induced Interface Water Reorientation for Alkaline Hydrogen Evolution Reaction

The slow water dissociation process in alkaline electrolyte severely limits the kinetics of HER. The orientation of H 2 O is well known to affect the dissociation process, but H 2 O orientation is hard to control because of its random distribution. Herein, an atomically asymmetric local electric field was designed by IrRu dizygotic single-atom sites (IrRu DSACs) to tune the H 2 O adsorption configuration and orientation, thus optimizing its dissociation process. The electric field intensity of IrRu DSACs is over 4.00×10 10 N/C. The ab initio molecular dynamics simulations combined with in situ Raman spectroscopy analysis on the adsorption behavior of H 2 O show that the M–H bond length (M=active site) is shortened at the interface due to the strong local electric field gradient and the optimized water orientation promotes the dissociation process of interfacial water. This work provides a new way to explore the role of single atomic sites in alkaline hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface-Driven Plasticity: The Presence of an Interface Affected Zone in Metallic Lamellar Composites: The Presence of an Interface Affected Zone…

Large strain deformation is used to make fine nanolayered two-phase composites from stacks of conventional polycrystalline sheets. The final materials made by this technique possess a crystallographically highly oriented structure containing nearly atomically perfect interfaces prevailing ubiquitously throughout the material. How this ordered structure evolves with strain from the coarser, more disordered state is not known. Here, using microstructural analysis and computational modeling, we discover a local interface-affected zone (IAZ) possessing the same crystallographically sharp structure in coarse layered composites as the final nanolayered composites. This means that this strongly oriented interface “zone” survives the mechanical work and overtakes the structure as it refines to the nanoscale. In essence, through the formation of this interface zone, the crossover to a highly oriented nanostructure occurs. Using microstructural analysis and crystal plasticity simulations, we show that the IAZ is a consequence of slip accommodation at the interface. This insight is valuable for developing processing strategies for superior interface-dominated materials.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy growth of high electron mobility InAs/AlSb deep quantum well structure

InAs/AlSb deep quantum well (QW) structures with high electron mobility were grown by molecular beam epitaxy (MBE) on semi-insulating GaAs substrates. AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer layers were grown to accommodate the lattice mismatch (7%) between the InAs/AlSb QW active region and GaAs substrate. Transmission electron microscopy shows abrupt interface and atomic force microscopy measurements display smooth surface morphology. Growth conditions of AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer were optimized. Al{sub 0.75}Ga{sub 0.25}Sb is better than AlSb as a buffer layer as indicated. The sample with optimal Al{sub 0.75}Ga{sub 0.25}Sb buffer layer shows a smooth surface morphology with root-mean-square roughness of 6.67 A. The electron mobility has reached as high as 27 000 cm{sup 2}/Vs with a sheet density of 4.54 Multiplication-Sign 10{sup 11}/cm{sup 2} at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗