Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AXIAL SYMMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Chiral lattice fermions, minimal doubling, and the axial anomaly

Exact chiral symmetry at finite lattice spacing would preclude the axial anomaly. In order to describe a continuum quantum field theory of Dirac fermions, lattice actions with purported exact chiral symmetry must break the flavor-singlet axial symmetry. We demonstrate that this is indeed the case by using a minimally doubled fermion action. For simplicity, we consider the Abelian axial anomaly in two dimensions. At finite lattice spacing and with gauge interactions, the axial anomaly arises from nonconservation of the flavor-singlet current. Similar nonconservation also leads to the axial anomaly in the case of the naieve lattice action. For minimally doubled actions, however, fine-tuning of the action and axial current is necessary to arrive at the anomaly. Conservation of the flavor nonsinglet vector current additionally requires the current to be fine-tuned. Finally, we determine that the chiral projection of a minimally doubled fermion action can be used to arrive at a lattice theory with an undoubled Dirac fermion possessing the correct anomaly in the continuum limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A numerical study of transient ignition and flame characteristics of diluted hydrogen versus heated air in counterflow

Combined experimental and numerical studies of the transient response of ignition to strained flows require a well-characterized ignition trigger. Laser deposition of a small radical pool provides a reliable method for initiating ignition of mixtures that are near the ignition limit. Two-dimensional direct numerical simulations are used to quantify the sensitivity of ignition kernel formation and subsequent edge-flame propagation to the oxidizer temperature and the initial width and amplitude of O-atom deposition used to trigger ignition in an axisymmetric counterflow of heated air versus ambient hydrogen/nitrogen. The ignition delay and super-equilibrium OH concentration in the nascent ignition kernel are highly sensitive to variations in these initial conditions. The ignition delay decreases as the amplitude of the initial O-atom deposition increases. The spatial distribution and the magnitude of the OH overshoot are governed by multi-dimensional effects. The degree of OH overshoot near the burner centerline increases as the diameter of the initial O-atom deposition region decreases. This result is attributed to preferential diffusion of hydrogen in the highly curved leading portion of the edge flame that is established following thermal runaway. The edge-flame speed and OH overshoot at the leading edge of the edge flame are relatively insensitive to variations in the initial conditions of the ignition. The steady edge-flame speed is approximately twice the corresponding laminar flame speed. The rate at which the edge flame approaches its steady state is insensitive to the initial conditions and depends solely on the diffusion time scale at the edge flame. The edge flame is curved toward the heated oxidizer stream as a result of differences in the chemical kinetics between the leading edge and the trailing diffusion flame. The structure of the highly diluted diffusion flame considered in this study corresponds to Linan's 'premixed flame regime' in which only the oxidizer leaks through the reaction zone such that the flame is located at fuel lean rather than stoichiometric mixture fraction conditions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel electron gun for inline MRI-linac configurations

Purpose: This work introduces a new electron gun geometry capable of robust functioning in the presence of a high strength external magnetic field for axisymmetric magnetic resonance imaging (MRI)-linac configurations. This allows an inline MRI-linac to operate without the need to isolate the linear accelerator (linac) using a magnetic shield. This MRI-linac integration approach not only leaves the magnet homogeneity unchanged but also provides the linac flexibility to move along the magnet axis of symmetry if the source to target distance needs to be adjusted. Methods: Simple electron gun geometry modifications of a Varian 600C electron gun are considered and solved in the presence of an external magnetic field in order to determine a set of design principles for the new geometry. Based on these results, a new gun geometry is proposed and optimized in the fringe field of a 0.5 T open bore MRI magnet (GE Signa SP). A computer model for the 6 MeV Varian 600C linac is used to determine the capture efficiency of the new electron gun-linac system in the presence of the fringe field of the same MRI scanner. The behavior of the new electron gun plus the linac system is also studied in the fringe fields of two other magnets, a 1.0 T prototype open bore magnet and a 1.5 T GE Conquest scanner. Results: Simple geometrical modifications of the original electron gun geometry do not provide feasible solutions. However, these tests show that a smaller transverse cathode diameter with a flat surface and a slightly larger anode diameter could alleviate the current loss due to beam interactions with the anode in the presence of magnetic fields. Based on these findings, an initial geometry resembling a parallel plate capacitor with a hole in the anode is proposed. The optimization procedure finds a cathode-anode distance of 5 mm, a focusing electrode angle of 5°, and an anode drift tube length of 17.1 mm. Also, the linac can be displaced with ±15 cm along the axis of the 0.5 T magnet without capture efficiency reduction below the experimental value in zero field. In this range of linac displacements, the electron beam generated by the new gun geometry is more effectively injected into the linac in the presence of an external magnetic field, resulting in approximately 20% increase of the target current compared to the original gun geometry behavior at zero field. The new gun geometry can generate and accelerate electron beams in external magnetic fields without current loss for fields higher than 0.11 T. The new electron-gun geometry is robust enough to function in the fringe fields of the other two magnets with a target current loss of no more than 16% with respect to the current obtained with no external magnetic fields. Conclusions: In this work, a specially designed electron gun was presented which can operate in the presence of axisymmetric strong magnetic fringe fields of MRI magnets. Computer simulations show that the electron gun can produce high quality beams which can be injected into a straight through linac such as Varian 600C and accelerated with more efficiency in the presence of the external magnetic fields. Also, the new configuration allows linac displacements along the magnet axis in a range equal to the diameter of the imaging spherical volume of the magnet under consideration. The new electron gun-linac system can function in the fringe field of a MRI magnet if the field strength at the cathode position is higher than 0.11 T. The capture efficiency of the linac depends on the magnetic field strength and the field gradient. The higher the gradient the better the capture efficiency. The capture efficiency does not degrade more than 16%.

43 PARTICLE ACCELERATORS↗

Tracing the Pathway from Drift-Wave Turbulence with Broken Symmetry to the Production of Sheared Axial Mean Flow

This study traces the emergence of sheared axial flow from collisional drift-wave turbulence with broken symmetry in a linear plasma device—the controlled shear decorrelation experiment. As the density profile steepens, the axial Reynolds stress develops and drives a radially sheared axial flow that is parallel to the magnetic field. Results show that the nondiffusive piece of the Reynolds stress is driven by the density gradient, results from spectral asymmetry of the turbulence, and, thus, is dynamical in origin. Taken together, these findings constitute the first simultaneous demonstration of the causal link between the density gradient, turbulence, and stress with broken spectral symmetry and the mean axial flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radial acceleration of ions by a laser pulse in a plasma channel

The approximate analytic solution of the Cauchy problem is constructed for a system of kinetic equations of an electron–ion plasma that describe the acceleration of ions and the collisionless heating of electrons caused by the radial ponderomotive force of a laser beam that propagates in the transparent plasma of a gas or other low-density target. Under conditions where the Debye radius, r{sub De}, of the electrons is considerably smaller than the characteristic localization scale, L, of the laser beam along the radius, ε = r{sub De}/L ≪ 1, this solution is found by a group transformation that is specified by the operator of approximate renormalization-group symmetries over small parameters, ε and μ = √(Zm/M), of the initial distribution functions of particles. For an axially symmetric geometry of the laser beam, the temporal and spatial dependences of the distribution functions of particles are obtained and their integral characteristics, such as the density, mean velocity, temperature, and energy spectrum, are found. The formation of a cylindrical density cusp and the localized heating of electrons at the laser-channel boundary are analytically described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Increasing plasma parameters using sheared flow stabilization of a Z-pinch

The ZaP and ZaP-HD Flow Z-pinch experiments at the University of Washington have successfully demonstrated that sheared plasma flows can be used as a stabilization mechanism over a range of parameters that has not previously been accessible to long-lived Z-pinch configurations. The stabilization is effective even when the plasma column is compressed to small radii, producing predicted increases in magnetic field and electron temperature. The flow shear value, extent, and duration are shown to be consistent with theoretical models of the plasma viscosity, which places a design constraint on the maximum axial length of a sheared flow stabilized Z-pinch. Measurements of the magnetic field topology indicate simultaneous azimuthal symmetry and axial uniformity along the entire 100 cm length of the Z-pinch plasma. Separate control of plasma acceleration and compression has increased the accessible plasma parameters and has generated stable plasmas with radii of 0.3 cm, as measured with a high resolution digital holographic interferometer. Compressing the plasma with higher pinch currents has produced high magnetic fields (8.5 T) and electron temperatures (1 keV) with an electron density of 2×10 17 cm -3 , while maintaining plasma stability for many Alfvén times (approximately 50 μs). Thus, the results suggest that sheared flow stabilization can be applied to extend Z-pinch plasma parameters to high energy densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of parasitic axial flow by drift wave turbulence with broken symmetry: Theory and experiment

Detailed measurements of intrinsic axial flow generation parallel to the magnetic field in the controlled shear decorrelation experiment linear plasma device with no axial momentum input are presented and compared to theory. The results show a causal link from the density gradient to drift-wave turbulence with broken spectral symmetry and development of the axial mean parallel flow. As the density gradient steepens, the axial and azimuthal Reynolds stresses increase and radially sheared azimuthal and axial mean flows develop. A turbulent axial momentum balance analysis shows that the axial Reynolds stress drives the radially sheared axial mean flow. The turbulent drive (Reynolds power) for the azimuthal flow is an order of magnitude greater than that for axial flow, suggesting that the turbulence fluctuation levels are set by azimuthal flow shear regulation. The direct energy exchange between axial and azimuthal mean flows is shown to be insignificant. Therefore, the axial flow is parasitic to the turbulence-zonal flow system and is driven primarily by the axial turbulent stress generated by that system. The non-diffusive, residual part of the axial Reynolds stress is found to be proportional to the density gradient and is formed due to dynamical asymmetry in the drift-wave turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uniqueness Theorem for Black Objects

We shall review the current status of uniqueness theorem for black objects in higher dimensional spacetime. At the beginning we consider static charged asymptotically flat spacelike hypersurface with compact interior with both degenerate and non-degenerate components of the event horizon in n-dimensional spacetime. We gave some remarks concerning partial results in proving uniqueness of stationary axisymmetric multidimensional solutions and winding numbers which can uniquely characterize the topology and symmetry structure of black objects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonaxisymmetric Shapes of a Magnetically Levitated and Spinning Water Droplet

The shape of a weightless spinning liquid droplet is governed by the balance between the surface tension and centrifugal forces. The axisymmetric shape for slow rotation becomes unstable to a nonaxisymmetric distortion above a critical angular velocity, beyond which the droplet progresses through a series of 2-lobed shapes. Theory predicts the existence of a family of 3- and 4-lobed equilibrium shapes at higher angular velocity. We investigate the formation of a triangular-shaped magnetically levitated water droplet, driven to rotate by the Lorentz force on an ionic current within the droplet. We also study equatorial traveling waves which give the droplet threefold, fourfold, and fivefold symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flux tube train model for local turbulence simulation of toroidal plasmas

A new simulation method for local turbulence in toroidal plasmas is developed by extending the conventional idea of the flux tube model. In the new approach, a train of flux tubes is employed, where flux tube simulation boxes are serially connected at each end along a field line so as to preserve a symmetry of the local gyrokinetic equations for image modes in an axisymmetric torus. Validity of the flux tube train model is confirmed against the toroidal ion temperature gradient turbulence for a case with a long parallel correlation of fluctuations, demonstrating numerical advantages over the conventional method in the time step size and the symmetry-preserving property.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gravitational lensing beyond the weak-field approximation

Gravitational lensing is considered in the full spacetime formalism of general relativity, assuming that the light rays are lightlike geodesics in a Lorentzian manifold. The review consists of three parts. The first part is devoted to spherically symmetric and static spacetimes. In particular, an exact lens map for this situation is discussed. The second part is on axisymmetric and stationary spacetimes. It concentrates on the investigation of the photon region, i.e., the region filled by spherical lightlike geodesics, in the Kerr spacetime. The photon region is of crucial relevance for the formation of a shadow. Finally, the third part briefly addresses two topics that apply to spacetimes without symmetry, namely Fermat’s principle and the exact lens map of Frittelli and Newman.

79 ASTRONOMY AND ASTROPHYSICS↗

Vlasov tokamak equilibria with sheared toroidal flow and anisotropic pressure

By choosing appropriate deformed Maxwellian ion and electron distribution functions depending on the two particle constants of motion, i.e., the energy and toroidal angular momentum, we reduce the Vlasov axisymmetric equilibrium problem for quasineutral plasmas to a transcendental Grad-Shafranov-like equation. This equation is then solved numerically under the Dirichlet boundary condition for an analytically prescribed boundary possessing a lower X-point to construct tokamak equilibria with toroidal sheared ion flow and anisotropic pressure. Depending on the deformation of the distribution functions, these steady states can have toroidal current densities either peaked on the magnetic axis or hollow. These two kinds of equilibria may be regarded as a bifurcation in connection with symmetry properties of the distribution functions on the magnetic axis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Separability and dynamical symmetry of Quantum Dots

The separability and Runge–Lenz-type dynamical symmetry of the internal dynamics of certain two-electron Quantum Dots, found by Simonović et al. (2003), are traced back to that of the perturbed Kepler problem. A large class of axially symmetric perturbing potentials which allow for separation in parabolic coordinates can easily be found. Apart from the 2:1 anisotropic harmonic trapping potential considered in Simonović and Nazmitdinov (2013), they include a constant electric field parallel to the magnetic field (Stark effect), the ring-shaped Hartmann potential, etc. The harmonic case is studied in detail. -- Highlights: • The separability of Quantum Dots is derived from that of the perturbed Kepler problem. • Harmonic perturbation with 2:1 anisotropy is separable in parabolic coordinates. • The system has a conserved Runge–Lenz type quantity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spontaneously axisymmetry-breaking phase in a binary mixture of spinor Bose-Einstein condensates

We study the ground-state phases for a mixture of two atomic spin-1 Bose-Einstein condensates in the presence of a weak magnetic (B) field. The ground state is found to contain a broken-axisymmetry (BA) phase due to competitions among intraspecies and interspecies spin-exchange interactions and the linear Zeeman shifts. This is in contrast to the case of a single-species spin-1 condensate, where the axisymmetry breaking results from competitions among the linear and quadratic Zeeman shifts and the intraspecies ferromagnetic interaction. All other remaining ground-state phases for the mixture are found to preserve axisymmetry. We further elaborate on the ground-state phase diagram and calculate the Bogoliubov excitation spectra of the phases. For the BA phase, there exist three Goldstone modes that attempt to restore the broken U(1) and SO(2) symmetries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hybrid SO(10) Axion Model without Quality Problem

Invisible axion models that solve the strong C P problem via the Peccei-Quinn (PQ) mechanism typically have a quality problem that arises from quantum gravity effects which violate all global symmetries. These models therefore require extreme fine-tuning of parameters for consistency. We present a new solution to the quality problem in a unified SO ( 10 ) × U ( 1 ) a gauge model, where U ( 1 ) a is an anomaly free axial gauge symmetry. PQ symmetry emerges as an accidental symmetry in this setup, which admits a PQ breaking scale as large as 7 × 10 11 GeV , allowing for the axion to be the cosmological dark matter. We call this a hybrid axion model due to its unique feature that it interpolates between the popular KSVZ and DFSZ axion models. Its predictions for the experimentally measurable axion couplings to the nucleon and electron are distinct from those of the usual models, a feature that can be used to test it. Furthermore, the model has no domain wall problem and it provides a realistic and predictive framework for fermion masses and mixings. Published by the American Physical Society 2025

Babu, K. S. (ORCID:0000000161475155)↗

Preserving spherical symmetry in axisymmetric coordinates for diffusion problems

Persevering symmetric solutions, even in the under-converged limit, is important to the robustness of production simulation codes. We explore the symmetry preservation in both a continuous nodal and a mixed finite element method. In their standard formulation, neither method preserves spherical solution symmetry in axisymmetric (RZ) coordinates. We propose two methods, one for each family of finite elements, that recover spherical symmetry for low-order finite elements on linear or curvilinear meshes. This is a first step toward understanding achieving symmetry for higher-order elements. (authors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Symmetries of resistive two-fluid magnetohydrodynamics under reversals of toroidal field, current, and rotation

The discrete symmetries of time-dependent, non-axisymmetric, two-fluid magnetohydrodynamics (MHD) equations are considered. Solutions of the time-independent, axisymmetric, ideal-MHD equations remain solutions under reversals of the toroidal field, current density, or rotation. Introducing non-axisymmetry, resistivity, and two-fluid effects into the equations each break different symmetries. Symmetry groups for solutions possessing up-down spatial symmetry, and the effect of flipping the magnetic geometry across the horizontal midplane, are also considered. It is shown that poloidal velocity may or may not be reversed under a simultaneous reversal of the toroidal field and a vertical reflection of the magnetic geometry, depending on the symmetry of the velocity. Because the symmetry groups of ideal, resistive, and two-fluid MHD are distinct, it may be possible to ascertain the dominant physical mechanism of various phenomena through empirical observations of symmetry-breaking. These results, which hold for nonlinear solutions in arbitrary geometry, should also be of use in testing numerical codes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Double cylinder target design for study of hydrodynamic instabilities in multi-shell ICF

Cylindrical implosions are used to study hydrodynamic instability growth for inertial confinement fusion (ICF) applications, as the cylindrical geometry allows for easier diagnostic access while retaining convergence effects. In this work, we use the established cylindrical implosion platform [Palaniyappan et al., Phys. Plasmas 27, 042708 (2020)] to inform the double shell ICF campaign [Montgomery et al., Phys. Plasmas 25, 092706 (2018)]. We present a design for a double cylindrical target as an analogue to the double shell ICF capsule in order to study hydrodynamic instability growth on the high-Z inner shell. Our design work is done with two-dimensional (2D) Eulerian radiation-hydrodynamics simulations, considering the axial uniformity of the implosion and feasibility of measuring the instability growth of pre-seeded single mode sinusoidal perturbations. We discuss in depth the design for a target to be directly driven at the OMEGA laser facility [Boehly et al., Opt. Commun. 133, 495 (1997)]. We evaluate the design for axial implosion symmetry and visibility of instability growth using synthetic radiographs constructed from the simulations, as the instability growth on the inner cylinder is experimentally measured using x-ray radiography of the implosion. We find that the seeded perturbation growth on the inner cylinder should be visible in an experiment, even with axial implosion asymmetry and preheat. We compare our 2D simulations with linear theory predictions for perturbation growth and show that a cylinder with lower azimuthal mode number (mode-20) perturbations compares more favorably with linear theory, while a cylinder with higher azimuthal mode number (mode-40) perturbations at the same starting amplitude saturates and is over-predicted by linear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗