Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALLOY SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

Considerable effort is being made to develop lead-free solders for assembling in environmental-conscious electronics, due to the inherent toxicity of Pb. The search for substitute alloys of Pb–Sn solders has increased in order to comply with different soldering purposes. The solder must not only meet the expected levels of electrical performance but may also have appropriate mechanical strength, with the absence of cracks in the solder joints. The Sn–Sb alloy system has a range of compositions that can be potentially included in the class of high temperature solders. This study aims to establish interrelations of solidification thermal parameters, microstructure and mechanical properties of Sn–Sb alloys (2 wt.%Sb and 5.5 wt.%Sb) samples, which were directionally solidified under cooling rates similar to those of reflow procedures in industrial practice. A complete high-cooling rate cellular growth is shown to be associated with the Sn–2.0 wt.%Sb alloy and a reverse dendrite-to-cell transition is observed for the Sn–5.5 wt.%Sb alloy. Strength and ductility of the Sn–2.0 wt.%Sb alloy are shown not to be affected by the cellular spacing. On the other hand, a considerable variation in these properties is associated with the cellular region of the Sn–5.5 wt.%Sb alloy casting. - Graphical abstract: Display Omitted - Highlights: • The microstructure of the Sn–2 wt.%Sb alloy is characterized by high-cooling rates cells. • Reverse dendrite > cell transition occurs for Sn–5.5 wt.%Sb alloy: cells prevail for cooling rates > 1.2 K/s. • Sn–5.5 wt.%Sb alloy: the dendritic region occurs for cooling rates < 0.9 K/s. • Sn–5.5 wt.%Sb alloy: tensile properties are improved with decreasing cellular spacing.

36 MATERIALS SCIENCE↗

Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying

Highlights: • Annihilation of dislocations was suppressed by Cr alloying to CuNiSi alloys. • Cr alloying to CuNiSi alloys hinders the kinetics and refines precipitates. • Zr alloying to CuNiSi alloys promotes the growth and kinetics of precipitates. • The mechanical properties were quantitatively related to the microstructures. - Abstract: Due to their high strength and high electrical conductivity, CuNiSi system alloys are widely used as lead frames and connectors. In this work, CuNiSi alloys alloyed with Cr and Zr were rolled at liquid nitrogen temperature and subjected to various aging treatments. High-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) analysis showed that in addition to forming Cr{sub 3}Si and Ni{sub 2}SiZr particles, elemental Cr and Zr distributed evenly in the matrix. Ni and Si segregated at the interface between the particles and matrix to form Ni{sub 2}Si precipitates. During the aging process, Cr alloying increased the hardness while slightly reducing the electrical conductivity of the alloy. This was ascribed to the refined precipitates and hindered precipitation kinetics. Zr alloying promoted both the precipitate growth and the precipitation kinetics of the CuNiSi alloys, while decreasing their hardness and enhancing their electrical conductivity. According to the results of the synchrotron X-ray diffraction (XRD) analysis, Cr alloying increased the dislocation density of CuNiSi alloys and suppressed the annihilation of dislocations during aging. This promoted strength through work hardening. Compared to CuNiSi alloys aged at 723 K for 2 h, the ultimate tensile strength of the alloys obtained after Cr alloying using a two-step rolling aging process was increased by 154 MPa and their electrical conductivity was increased by 4.8% International Annealed Copper Standard (IACS).

36 MATERIALS SCIENCE↗

Induced magnetic ordering in alloyed compounds based on Pauli paramagnet YCo{sub 2}

Intermetallic YCo{sub 2} compound is a Pauli exchange-enhanced paramagnet. Structural and magnetic properties melt-spun YCo{sub 2} pure and alloyed with Nb or Ti are presented. The samples crystallize in MgCu{sub 2}-type phase with lattice constant a changing from 7.223 Å for YCo{sub 2}, through 7.213 Å for Y{sub 0.9}Nb{sub 0.1}Co{sub 2} to 7.192 Å for Y{sub 0.9}Ti{sub 0.1}Co{sub 2}, where Y atoms are replaced by Nb or Ti atoms. Nanocrystalline phases can be produced by appropriate cooling rates for the solidification process. By the synthesis process free volumes, vacancies, and alloyed atoms are introduced into the YCo{sub 2} intermetallic. Ab-initio calculations have been performed to investigate the effects of substitution on the spin-split electronic band structure in the ordered YCo{sub 2}. A ferrimagnetic ground state is found in the alloyed systems with substitution on the Y-site which is energetically favorable compared to point defects on Co-sites. However, the experimentally found increased magnetic ordering in alloyed YCo{sub 2} appears to be based on microstructure effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Site preference and vibrational properties of R{sub 3}T{sub 4+x}Al{sub 12-x} (R=Y, Ce, Gd, U, Th; T=Fe, Ru)

The crystal structures and phase stability of the ternary alloys R{sub 3}T{sub 4+x}Al{sub 12-x} (R=Y, Ce, Gd, U, Th; T=Fe, Ru) have been investigated using the interatomic potentials obtained by the lattice inversion method. These compounds crystallize in the hexagonal Gd{sub 3}Ru{sub 4}Al{sub 12}-type structure and the calculated lattice constants correspond well with the experiments. Among the four different kinds of Al sites in the structure, the most preferential sites for Fe atoms or Ru atoms are 6h sites. The properties related to lattice vibration, such as the phonon density of states (DOS) and Debye temperature of R{sub 3}Fe{sub 4}Al{sub 12,} have been evaluated. A qualitative analysis is carried out with the relevant potentials for the vibrational modes, which makes it possible to predict some thermodynamic properties. - The crystal structure of R{sub 3}T{sub 4}Al{sub 12} could be considered as two kinds of layer stacking up along the hexagonal c axis. Fe and Ru atoms preferentially substitute for Al atoms at 6h site.

36 MATERIALS SCIENCE↗

Magnetic properties of full-Heusler alloy Co{sub 2}Fe{sub 1-x}Mn{sub x}Al films grown by molecular-beam epitaxy

We have investigated magnetic properties of single-crystalline full-Heusler alloy Co{sub 2}Fe{sub 1-x}Mn{sub x}Al films (0<x<1) grown on GaAs (001) by molecular-beam epitaxy at different temperatures. It is found that as x increases, the films grown at 160 deg. C have complex magnetic phases, but show pure ferromagnetic properties when grown at 280 deg. C. We attribute this magnetic behavior to the competition between ferromagnetic and antiferromagnetic Mn-Mn interactions, which are proved by x-ray magnetic circular dichroism measurements. Moreover, we have investigated in-plane magnetic anisotropies of Co{sub 2}Fe{sub 1-x}Mn{sub x}Al films with pure ferromagnetic phases and deduced the corresponding anisotropy constants which also remarkably depend on x.

36 MATERIALS SCIENCE↗

Effects of CrRu-SiO{sub x} underlayer with MgO intermediate layer on the microstructure and magnetic properties of FePt-C thin film

The effect of the CrRu-SiO{sub x} underlayer with different doping concentrations and the thickness of the CrRu underlayer on the microstructure and magnetic properties of FePt-C films were investigated. FePt films exhibited L1{sub 0} (001) texture at various SiO{sub x} doping concentrations. The coercivities were as large as 28 kOe and the slope of M-H loop at coercivity was approximately equal to 1, suggesting that FePt grains were well exchange decoupled. Grain size was only slightly reduced after introducing the CrRu-SiO{sub x} underlayer. But the contact angle between the FePt grains and the MgO intermediate layer around 135 deg. indicated the a MgO intermediate layer was not favored for smaller grains to obtain good L1{sub 0} (001) texture. X-ray photoelectron spectroscopy in-depth profile showed that Si diffused into a whole FePt-C layer and C diffused to the film surface.

36 MATERIALS SCIENCE↗

Phonon dynamics and Urbach energy studies of MgZnO alloys

The Mg{sub x}Zn{sub 1−x}O alloy system is emerging as an environmentally friendly choice in ultraviolet lighting and sensor technologies. Knowledge of defects which impact their optical and material properties is a key issue for utilization of these alloys in various technologies. The impact of phase segregation, structural imperfections, and alloy inhomogeneities on the phonon dynamics and electronic states of Mg{sub x}Zn{sub 1−x}O thin films were studied via selective resonant Raman scattering (SRRS) and Urbach analyses, respectively. A series of samples with Mg composition from 0–68% were grown using a sputtering technique, and the optical gaps were found to span a wide UV range of 3.2–5.8 eV. The extent of the inherent phase segregation was determined via SRRS using two UV-laser lines to achieve resonance with the differing optical gaps of the embedded cubic and wurtzite structural domains. The occurrence of Raman scattering from cubic structures is discussed in terms of relaxation of the selection rules due to symmetry breaking by atomic substitutions. The Raman linewidth and Urbach energy behavior indicate the phase segregation region occurs in the range of 47–66% Mg. Below the phase segregation, the longitudinal optical phonons are found to follow the model of one-mode behavior. The phonon decay model of Balkanski et al. indicates that the major contributor to Raman linewidth arises from the temperature-independent term attributed to structural defects and alloy inhomogeneity, while the contribution from anharmonic decay is relatively small. Moreover, a good correlation between Urbach energy and Raman linewidth was found, implying that the underlying crystal dynamics affecting the phonons also affect the electronic states. Furthermore, for alloys with low Mg composition structural defects are dominant in determining the alloy properties, while at higher compositions alloy inhomogeneity cannot be neglected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal expansivity of Ge{sub 1-y}Sn{sub y} alloys

The temperature dependence of the lattice parameter of Ge{sub 1-y}Sn{sub y} alloys deposited on Si substrates has been determined from an analysis of their x-ray reciprocal-space maps. It is found that over the range 0<y<0.03 the alloy thermal expansivity increases by up to 20% as a function of y. This implies a strong deviation from a linear interpolation between the end compounds since the thermal expansivities of pure Ge and {alpha}-Sn are nearly the same. Alternative interpolation formulas based on a Debye model and a mixed Debye-Einstein model of the phonon structure are tested and it is found that they also fail to explain the observed increase in thermal expansivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An electronic origin to the oscillatory segregation behavior in Ni-Cr and other BCC defects in FCC metals

Ni-Cr alloys exhibit oscillatory segregation behaviors near low index surfaces, in which the preferred segregation species changes from Ni in the first layer to Cr in the second layer. In many dilute-alloy systems, this oscillatory pattern is attributed to the elastic release of stresses in the local lattice around the segregating solute or impurity atom. These stresses are mostly thought to originate from mismatches in the atomic size of the solute and host atoms. In Ni-Cr alloys, however, an appreciable mismatch in atomic size is not present, leading to questions about the origins of the oscillatory behavior in this alloy. Therefore, using density functional theory, we have modeled the segregation of a single Cr atom in the and surfaces of FCC Ni, an alloy which exhibits this oscillatory behavior. Using Bader charge analysis, we show that the negative energy correlates directly with the amount of charge on the Cr atom. As Ni atoms strip valence charge from the Cr, the Cr contracts slightly in size. The greatest contraction and highest positive charge for the Cr occurs when it is in the second layer of the surface where the system exhibits the oscillating negative segregation energy. We then find that this behavior persists in other alloy systems (Ag-Nb, Cu-Cr, Pt-Nb, and Pt-V), which exhibit similar atomic radii and electronegativity differences between host and solute to Ni-Cr. These represent alloys in which the host metal exhibits an FCC ground-state structure while the solute metal exhibits a BCC ground-state structure.

36 MATERIALS SCIENCE↗

First-principles Study of Methane Dehydrogenation on a Bimetallic Cu/Ni(111) Surface

We present density-functional theory calculations of the dehydrogenation of methane and CHx (x =1–3) on a Cu/Ni(111) surface, where Cu atoms are substituted on the Ni surface at a coverage of 1/4 monolayer. As compared to the results on other metal surfaces, including Ni(111), a similar activation mechanism with different energetics is found for the successive dehydrogenation of CH4 on the Cu/Ni(111) surface. In particular, the activation energy barrier (Eact) for CH→C+H is found to be 1.8 times larger than that on Ni(111), while Eact for CH4→CH3+H is 1.3 times larger. Considering the proven beneficial effect of Cu observed in the experimental systems, our findings reveal that the relative Eact in the successive dehydrogenation of CH4 plays a key role in impeding carbon formation during the industrial steam reforming of methane. Our calculations also indicate that previous scaling relationships of the adsorption energy (Eads) for CHx (x=1–3) and carbon on pure metals also hold for several Ni(111)-based alloy systems.

03 NATURAL GAS↗

Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloy in different structural states

This paper reports the observation of the clear Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} bulk metallic glass. The Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloys in different structural states are also investigated in situ through cyclic thermal dilation tests at different cyclic temperatures. The results show that these Invar effects are strengthened in the relaxation amorphous state, weakened in the nanocrystalline state, and absent in the complete crystalline state. X-ray diffraction and Moessbauer spectroscopy demonstrate that the structural influences on Invar effects can be explained by the different local atomic arrangements around Fe atoms in different structural states.

36 MATERIALS SCIENCE↗

Magnetocaloric effect in Tb{sub 60}Ni{sub 30}Al{sub 10} glass: A material that can either heat or cool upon magnetization

The Tb{sub 60}Ni{sub 30}Al{sub 10} amorphous alloy was prepared by melt-spinning in the form of ribbons. Its magnetic behavior shows upon magnetization the occurrence of a spin glass to ferromagnetic and a paramagnetic to ferromagnetic transitions at 5 and 48 K. The magnetocaloric effects associated with these transitions were investigated. Large positive and negative magnetic entropy changes upon magnetization have been observed in a temperature range interesting for gas liquefaction.

36 MATERIALS SCIENCE↗

Epitaxial germanidation of full-Heusler Co{sub 2}FeGe alloy thin films formed by rapid thermal annealing

The authors demonstrated that a full-Heusler Co{sub 2}FeGe (CFG) alloy thin film was epitaxially grown by rapid-thermal-annealing-induced germanidation of an Fe/Co/pseudo-Ge(001)-on-insulator (GOI) multilayer formed on a Si-on-insulator (SOI) substrate. X-ray diffraction (XRD) measurements with out-of-plane and in-plane configurations revealed that the CFG film was epitaxially grown along the [001] direction with the in-plane epitaxial relation of CFG[100] parallel GOI[100], although the film slightly contained a non-epitaxial component. The strong (111) and (200) superlattice diffraction intensities indicated that the CFG film had a high degree of order for the L2{sub 1} structure. Cross-sectional high-resolution transmission electron microscopy images of the film revealed that the film had dominant epitaxial and slight non-epitaxial components, which was consistent with the XRD measurements. The epitaxial component was grown directly on the buried oxide layer of the SOI substrate without formation of any interfacial layer.

36 MATERIALS SCIENCE↗

Dielectric function in the spectral range (0.5–8.5)eV of an (Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} thin film with continuous composition spread

We determined the dielectric function of the alloy system (Al{sub x}Ga{sub 1−x}){sub 2}O{sub 3} by spectroscopic ellipsometry in the wide spectral range from 0.5 eV to 8.5 eV and for Al contents ranging from x = 0.11 to x = 0.55. For the composition range x < 0.4, we observe single phase material in the β-modification and for larger Al content also the occurrence of γ-(Al,Ga){sub 2}O{sub 3}. We derived spectra of the refractive index and the absorption coefficient as well as energy parameters of electronic band-band transitions by model analysis of the dielectric function. The dependence of the dielectric functions lineshape and the energy parameters on x is highly continuous, reflecting theoretical expectations. The data presented here provide a basis for a deeper understanding of the electronic properties of this material system and may be useful for device engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preliminary irradiation effect on corrosion resistance of zirconium alloys - 2016-0067

In order to improve the composition and structure of zirconium alloys, it is important to know how changes in their structure-phase state under irradiation affect various properties, including corrosion. In this work, autoclave corrosion tests were carried out on fuel cladding samples made of zirconium-niobium and zirconium-niobium-tin-iron alloy systems. All samples were preliminarily irradiated in a BOR-60 nuclear reactor at a fluence of 2 X10{sup 26} m{sup -2} (E>0.1 MeV). The autoclave tests of irradiated and unirradiated samples were performed at 350 deg. C for 240 days in distilled water containing 10 ppm lithium and 1,600 ppm boron. The irradiation of all alloys resulted in a significant change in their initial structure-phase state. The content of niobium in b-niobium-phase precipitates was reduced from 80 % to - 90 % to 50 % to - 60 %. Iron atoms from the Laves-phase particles were diffused into a matrix, and their lattice transformed from hexagonal close-packed to body-centered cubic. An average size of the transformed second-phase precipitates in the irradiated alloys increased relatively to an average size of the initial precipitates. Elongated radiation-induced precipitates (RIPs) with an average length up to 7 nm were formed in all alloys under irradiation. In comparison with the unirradiated state, irradiation reduced the corrosion of zirconium-niobium alloys, and this effect became more apparent with increased niobium content in the alloy. For zirconium-niobium-tin-iron alloys, irradiation led to more severe corrosion, mostly because of increasing tin content. Niobium content increased up to 2.37 %, and iron content decreased up to 0.18 % in the alloys, contributing to higher corrosion resistance. An interconnection between the niobium/(tin + iron) alloying parameter, quantity of nanometric precipitates formed therein under irradiation, and their corrosion performance has been suggested. (authors)

36 MATERIALS SCIENCE↗

The Surprising Occurrence of Non-Steady-State Growth of Divergent Lamellar Decomposition Products in Uranium-Niobium Alloys: A Preliminary Report

Metastable materials are all expected to decompose sooner or later, but sometimes the kinetic paths they travel confound standard textbook explanations. Such is the case for supersaturated uranium-niobium alloy microstructures that transform to lamellar products in the 300-647 ºC temperature range. An experimental study of these isothermal transformation kinetics is reported here for U-5.5Nb and U-7.5Nb alloys. About 85 specimens from each alloy were isothermally aged at eight temperatures for durations spanning five orders of magnitude, up to two years. The volume fractions and growth rates of fine-spacing discontinuous precipitation (DP) and coarse-spacing discontinuous coarsening (DC) lamellar reaction products were directly measured by quantitative metallography. This study was enhanced by explicit consideration of the DP initiation site during measurements: (1) prior matrix grain boundaries (the usual site found in every alloy that produces DP) and (2) carbide inclusions (a rarely-encountered site). This constitutes the first systematic study of inclusion-nucleated DP in any alloy system. The growth rates were measured by the robust method of Cahn and Hagel (1963). The measurements were taken across the entire span of fraction transformed, giving the best opportunity to discriminate between typical vs. anomalous growth behavior. In both alloys the growth rates for DP and DC are constant at the lowest aging temperatures (300-400ºC), in line with standard explanations. The growth rates, however, noticeably diminish with reaction time at the higher aging temperatures (450-625ºC), dropping by an order of magnitude or more. These results corroborate as-yet unpublished data of divergent lamellar spacings (i.e., increase of the spacing with reaction time) observed at the same higher aging temperatures. These surprising results are rationalized in terms of kinetic competition for chemical driving force between the lamellar and precursor nonlamellar reactions on comparable time scales. In previous studies divergent lamellar products occurred only in transformations involving diffusion of both interstitial and substitutional elements. Since the same phenomena are now seen in a purely substitutional system like U-Nb, it is likely that divergent and time-varying lamellar reactions may be more prevalent in other substitutional alloy systems than previously thought.

36 MATERIALS SCIENCE↗

Dielectric function in the NIR-VUV spectral range of (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} thin films

We determined the dielectric function of the alloy system (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} by spectroscopic ellipsometry in the wide spectral range from 0.5 eV to 8.5 eV and for In contents ranging from x = 0.02 to x = 0.61. The predicted optical transitions for binary, monoclinic β-Ga{sub 2}O{sub 3}, and cubic bcc-In{sub 2}O{sub 3} are well reflected by the change of the dielectric functions' lineshape as a function of the In content. In an intermediate composition range with phase-separated material (x ≈ 0.3…0.4), the lineshape differs considerably, which we assign to the presence of the high-pressure rhombohedral InGaO{sub 3}-II phase, which we also observe in Raman experiments in this range. By model analysis of the dielectric function, we derived spectra of the refractive index and the absorption coefficient and energy parameters of electronic band-band transitions. We discuss the sub-band gap absorption tail in relation to the influence of the In 4d orbitals on the valence bands. The data presented here provide a basis for a deeper understanding of the electronic properties of this technologically important material system and may be useful for device engineering.

36 MATERIALS SCIENCE↗

Phase change behavior in titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films

The titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films were deposited on Si(100) substrates by comagnetron sputtering method. The titanium concentrations in those films were determined by x-ray photoelectron spectroscopy. The influence of Ti doping upon phase change characteristics of the samples has been investigated by x-ray diffraction and a temperature-regulable UVISEL typed spectroscopic ellipsometry. With the augmentation of Ti doping concentration, the crystalline temperatures of the films went up while annealing, and the face-centered-cubic phase of them had high thermal stability because of the bond making between Ti and Te elements partly.

36 MATERIALS SCIENCE↗