Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Controlled preparation of Ag–Cu{sub 2}O nanocorncobs and their enhanced photocatalytic activity under visible light

Graphical abstract: The corncob-like Ag–Cu{sub 2}O nanostructure with suitably exposed Ag surface exhibited much higher photocatalytic activity than Ag@Cu{sub 2}O nanocables and Cu{sub 2}O nanowires. - Highlights: • Ag–Cu{sub 2}O nanocorncobs have been controllably prepared by a simple synthesis. • The possible formation mechanism of Ag–Cu{sub 2}O has been studied. • Ag–Cu{sub 2}O exhibits noticeable improved photocurrent compared with the pure Cu{sub 2}O NWs. • Ag–Cu{sub 2}O with suitably exposed Ag surface shows much higher photocatalytic activity. - Abstract: Novel corncob-like nano-heterostructured Ag–Cu{sub 2}O photocatalyst has been controllably prepared by adjusting the synthetic parameters, and the possible formation mechanism has been also studied. The photoelectrochemical and photocatalytic performances demonstrated that the as-prepared Ag–Cu{sub 2}O nanocorncobs exhibited higher photocatalytic activity than both pure Cu{sub 2}O nanowires and cable-like Ag@Cu{sub 2}O nano-composites. It was concluded that Ag–Cu{sub 2}O nanocorncobs with suitably exposed Ag surface not only effectively inhibit the recombination of electron–hole pairs but also suitably increase the active sites of electronic conduction, and thus increasing the photocatalytic activity under visible light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of oxygen vacancies and Ag deposition on the magnetic properties of Ag/N co-doped TiO2 single-crystal films

Highlights: • Photochemical deposition method to prepare Ag-doped TiO{sub 2} samples. • TiO{sub 2} single crystal films are used for studying room temperature ferromagnetism origin. • Ag element is deposited on TiO{sub 2} single crystal films surface in the form of Ag particles. • Oxygen vacancies and Ag particles synergy influence the ferromagnetism in samples. - Abstract: We employ TiO{sub 2} single-crystal films as a substrate and use a photochemical deposition method to prepare Ag-doped and Ag/N co-doped TiO{sub 2} single-crystal films. We also investigate the optical and magnetic properties of the samples using various measurements. No diffraction peaks related to silver oxide appear in the X-ray diffraction (XRD) spectra, which implies the existence of Ag atoms in Ag-doped TiO{sub 2} single-crystal films. X-ray photoelectron spectroscopy (XPS) spectra indicate the existence of Ti{sup 4+} and Ag° in Ag/N co-doped TiO{sub 2} single-crystal films. It is found that Ag is deposited on a TiO{sub 2} single-crystal film surface in the form of Ag particles. Meanwhile, Ag particles can slightly enhance ferromagnetism in Ag-doped TiO{sub 2} single-crystal films compared with the TiO{sub 2} single-crystal film sample. Oxygen vacancies and Ag particle synergy influence ferromagnetism in Ag/N co-doped TiO{sub 2} single-crystal films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment

Highlights: • We report a novel process for recovering Au, Ag, and Pd from waste PCBs. • The effect of SCWO on the leaching of Au, Ag, and Pd in waste PCBs was studied. • SCWO was highly efficient for enhancing the leaching of Au, Ag, and Pd. • The optimum leaching parameters for Au, Ag, and Pd in iodine–iodide were studied. - Abstract: Precious metals are the most attractive resources in waste printed circuit boards (PCBs) of mobile phones. In this work, an alternative process for recovering Au, Ag, and Pd from waste PCBs of mobile phones by supercritical water oxidation (SCWO) pre-treatment combined with iodine–iodide leaching process was developed. In the process, the waste PCBs of mobile phones were pre-treated in supercritical water, then a diluted hydrochloric acid leaching (HL) process was used to recovery the Cu, whose leaching efficiency was approximately 100%, finally the resulting residue was subjected to the iodine–iodide leaching process for recovering the Au, Ag, and Pd. Experimental results indicated that SCWO pre-treatment temperature, time, and pressure had significant influence on the Au, Ag, and Pd leaching from (SCWO + HL)-treated waste PCBs. The optimal SCWO pre-treatment conditions were 420 °C and 60 min for Au and Pd, and 410 °C and 30 min for Ag. The optimum dissolution parameters for Au, Pd, and Ag in (SCWO + HL)-treated PCBs with iodine–iodide system were leaching time of 120 min (90 min for Ag), iodine/iodide mole ratio of 1:5 (1:6 for Ag), solid-to-liquid ratio (S/L) of 1:10 g/mL (1:8 g/mL for Ag), and pH of 9, respectively. It is believed that the process developed in this study is environment friendly for the recovery of Au, Ag, and Pd from waste PCBs of mobile phones by SCWO pre-treatment combined with iodine–iodide leaching process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microwave-Assisted Synthesis of Classically Immiscible Ag–Ir Alloy Nanoparticle Catalysts

In this work, we present the synthesis of Ag–Ir alloys in the form of solid-solution nanoparticles (NPs). Ag and Ir are classically immiscible in the bulk and therefore the physical properties of Ag–Ir alloys are unknown. A convenient microwave-assisted, solution-phase method that employs readily available Ag(NO 3 ) and IrCl 3 precursors enables the preparation of small (2.5–5.5 nm) Ag–IrNPs with alloyed structures. Ag $x$ Ir (100–$x$) NPs can be obtained by this method between $x$ = 6–31. The Ag–IrNPs resist dealloying upon heating up to 300 °C. Ir-rich Ag–IrNPs dispersed on amorphous silica are significantly more active gas-phase alkene hydrogenation catalysts than pure IrNPs. Density functional theory (DFT) and theoretical modeling studies reveal that the Ag–IrNPs—which are consistently larger than monometallic IrNPs prepared under the same conditions—have comparatively fewer strong H-binding edge sites. This promotes faster H atom transfer to coadsorbed alkenes. Ag–IrNPs supported on amorphous Co 3 O 4 show a linear composition dependence in the selective hydrogenation of C$=$O versus C$=$C bonds: more Ag-rich Ag–IrNPs are more selective toward C$=$O hydrogenation of the α,β-unsaturated aldehyde crotonaldehyde, yielding the industrially desirable crotyl alcohol. Furthermore, deposition of Ag–IrNPs inside Co 3 O 4 mesopores results in an additional ~56% selectivity enhancement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring Si growth on Ag(111) with scanning tunneling microscopy reveals that silicene structure involves silver atoms

Using scanning tunneling microscopy (STM), the elaboration of the so-called silicene layer on Ag(111) is monitored in real time during Si evaporation at different temperatures. It is shown that the growth of silicene is accompanied by the release of about 65% of the surface Ag atoms from the Si covered areas. We observe that Si islands develop on the Ag terraces and Si strips at the Ag step edges, progressively forming ordered (4×4), (√(13)×√(13)) R13.9°, and dotted phases. Meanwhile, displaced Ag atoms group to develop additional bare Ag terraces growing round the Si islands from the pristine Ag step edges. This indicates a strong interaction between Si and Ag atoms, with an important modification of the Ag substrate beneath the surface layer. This observation is in contradiction with the picture of a silicene layer weakly interacting with the unreconstructed Ag substrate, and strongly indicates that the structure of silicene on Ag(111) corresponds either to a Si-Ag surface alloy or to a Si plane covered with Ag atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Syntheses, crystal structures and spectroscopic properties of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}]

Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) was obtained from the direct solid state reaction of Ag, Nb, P{sub 2}S{sub 5} and S at 500 deg. C. KAg{sub 2}[PS{sub 4}] (2) was prepared from the reaction of K{sub 2}S{sub 3}, Ag, Nd, P{sub 2}S{sub 5} and extra S powder at 700 deg. C. Compound 1 crystallizes in the orthorhombic space group Pnma with a=12.2188(11), b=26.3725(16), c=6.7517(4) A, V=2175.7(3) A{sup 3}, Z=8. Compound 2 crystallizes in the non-centrosymmetric tetragonal space group I4-bar2m with lattice parameters a=6.6471(7), c=8.1693(11) A, V=360.95(7) A{sup 3}, Z=2. The structure of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) consists of [Nb{sub 2}S{sub 12}], [P{sub 2}S{sub 6}] and new found puckered [Ag{sub 2}S{sub 4}] chains which are along [001] direction. The Nb atoms are located at the center of distorted bicapped trigonal prisms. Two prisms share square face of two [S{sub 2}{sup 2-}] to form one [Nb{sub 2}S{sub 12}] unit, in which Nb-Nb bond is formed. The [Nb{sub 2}S{sub 12}] units share all S{sup 2-} corners with ethane-like [P{sub 2}S{sub 6}] units to form 14-membered rings. The novel puckered [Ag{sub 2}S{sub 4}] chains are composed of distorted [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles that share corners with each other. These chains are connected with [P{sub 2}S{sub 6}] units and [Nb{sub 2}S{sub 12}] units to form three-dimensional frame work. The structural skeleton of 2 is built up from [AgS{sub 4}] and [PS{sub 4}] tetrahedra linked by corner-sharing. The three-dimensional anionic framework contains orthogonal, intersecting tunnels directed along [100] and [010]. This compound possesses a compressed chalcopyrite-like structure. The structure is compressed along [001] and results from eight coordination sphere for K{sup +}. Both compounds are characterized with UV/vis diffuse reflectance spectroscopy and compound 1 with IR and Raman spectra. - Graphical abstract: The thiophosphates Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}] crystallize as three-dimensional networks. A remarkable structural feature of the former compound is a [Ag{sub 2}S{sub 4}] chain composed of [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on Ag by Materials Project

Ag is alpha La structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. there are two inequivalent Ag sites. In the first Ag site, Ag is bonded to twelve Ag atoms to form a mixture of corner, edge, and face-sharing AgAg12 cuboctahedra. There are six shorter (2.94 Å) and six longer (2.95 Å) Ag–Ag bond lengths. In the second Ag site, Ag is bonded to twelve Ag atoms to form a mixture of corner, edge, and face-sharing AgAg12 cuboctahedra. All Ag–Ag bond lengths are 2.95 Å.

36 MATERIALS SCIENCE↗

Materials Data on Ag by Materials Project

Ag is alpha Samarium structured and crystallizes in the trigonal R-3m space group. The structure is three-dimensional. there are two inequivalent Ag sites. In the first Ag site, Ag is bonded to twelve Ag atoms to form a mixture of edge, face, and corner-sharing AgAg12 cuboctahedra. There are six shorter (2.94 Å) and six longer (2.95 Å) Ag–Ag bond lengths. In the second Ag site, Ag is bonded to twelve Ag atoms to form a mixture of edge, face, and corner-sharing AgAg12 cuboctahedra. There are three shorter (2.94 Å) and six longer (2.95 Å) Ag–Ag bond lengths.

36 MATERIALS SCIENCE↗

Silver vanadium diphosphate Ag{sub 2}VP{sub 2}O{sub 8}: Electrochemistry and characterization of reduced material providing mechanistic insights

Silver vanadium phosphorous oxides (Ag{sub w}V{sub x}P{sub y}O{sub z}) are notable battery cathode materials due to their high energy density and demonstrated ability to form in-situ Ag metal nanostructured electrically conductive networks within the cathode. While analogous silver vanadium diphosphate materials have been prepared, electrochemical evaluations of these diphosphate based materials have been limited. We report here the first electrochemical study of a silver vanadium diphosphate, Ag{sub 2}VP{sub 2}O{sub 8}, where the structural differences associated with phosphorous oxides versus diphosphates profoundly affect the associated electrochemistry. Reminiscent of Ag{sub 2}VO{sub 2}PO{sub 4} reduction, in-situ formation of silver metal nanoparticles was observed with reduction of Ag{sub 2}VP{sub 2}O{sub 8}. However, counter to Ag{sub 2}VO{sub 2}PO{sub 4} reduction, Ag{sub 2}VP{sub 2}O{sub 8} demonstrates a significant decrease in conductivity upon continued electrochemical reduction. Structural analysis contrasting the crystallography of the parent Ag{sub 2}VP{sub 2}O{sub 8} with that of the proposed Li{sub 2}VP{sub 2}O{sub 8} reduction product is employed to gain insight into the observed electrochemical reduction behavior, where the structural rigidity associated with the diphosphate anion may be associated with the observed particle fracturing upon deep electrochemical reduction. Further, the diphosphate anion structure may be associated with the high thermal stability of the partially reduced Ag{sub 2}VP{sub 2}O{sub 8} materials, which bodes well for enhanced safety of batteries incorporating this material. - Graphical abstract: Structure and galvanostatic intermittent titration-type test data for silver vanadium diphosphate, Ag{sub 2}VP{sub 2}O{sub 8}. Highlights: ► First electrochemical study of a silver vanadium diphosphate, Ag{sub 2}VP{sub 2}O{sub 8}. ► In-situ formation of Ag{sup 0} nanoparticles was observed upon electrochemical reduction. ► Structural analysis used to provide insight of the electrochemical behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The U{sup 5+} compound Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24}: Synthesis, structure, and electronic properties

Black crystals of Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} have been made by direct combination of BaS, Ag, U, and S at 1273 K. This compound crystallizes in a new structure type in the space group C{sub 4v}{sup 10}−I4cm of the tetragonal system with four formula units in a cell with lattice constants a=13.9189(6) Å and c=23.7641(11) Å (V=4604(5) Å{sup 3}). Multiphoton Luminescence Spectroscopy measurements are consistent with the noncentrosymmetric nature of the structure. In the structure each U atom is octahedrally coordinated by six S atoms, whereas three of the five crystallographically independent Ag atoms are tetrahedrally coordinated to four S atoms, another has a seesaw coordination to four S atoms, and the last has a triangular coordination to three S atoms. The overall structure consists of the three-dimensional stacking of the US{sub 6}, AgS{sub 4}, and AgS{sub 3} polyhedra to leave channels in which Ba atoms reside. Based on the values of the U–S interatomic distances, the compound Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} contains U{sup 5+} and charge balance is achieved with the formal oxidation states of 9 Ba{sup 2+}, 10 Ag{sup 1+}, 4 U{sup 5+} and 24 S{sup 2−}. DFT calculations predict an antiferromagnetic ground state and a band gap of 2.1 eV. Resistivity measurements indicate that the compound is a semiconductor with a complex activation mechanism and activation energies ranging from 0.03(1) eV to 0.08(1) eV. - Graphical abstract: General view of the Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} structure. - Highlights: • Black crystals of Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} have been made by direct combination of BaS, Ag, U, and S at 1273 K. • Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} contains U{sup 5+} and charge balance is achieved with 9 Ba{sup 2+}, 10 Ag{sup 1+}, 4 U{sup 5+}, and 24 S{sup 2−}. • DFT calculations predict an antiferromagnetic ground state and a band gap of 2.1 eV. • The compound is a semiconductor with activation energies ranging from 0.03(1) eV to 0.08(1) eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal ion displacements in noncentrosymmetric chalcogenides La{sub 3}Ga{sub 1.67}S{sub 7}, La{sub 3}Ag{sub 0.6}GaCh{sub 7} (Ch=S, Se), and La{sub 3}MGaSe{sub 7} (M=Zn, Cd)

The quaternary Ga-containing chalcogenides La{sub 3}Ag{sub 0.6}GaS{sub 7}, La{sub 3}Ag{sub 0.6}GaSe{sub 7}, La{sub 3}ZnGaSe{sub 7}, and La{sub 3}CdGaSe{sub 7}, as well as the related ternary chalcogenide La{sub 3}Ga{sub 1.67}S{sub 7}, were prepared by reactions of the elements at 950 °C. They adopt noncentrosymmetric hexagonal structures (space group P6{sub 3}, Z=2) with cell parameters (a=10.2 Å, c=6.1 Å for the sulfides; a=10.6 Å, c=6.4 Å for the selenides) that are largely controlled by the geometrical requirements of one-dimensional stacks of Ga-centered tetrahedra separated by the La atoms. Among these compounds, which share the common formulation La{sub 3}M{sub 1–x}GaCh{sub 7} (M=Ga, Ag, Zn, Cd; Ch=S, Se), the M atoms occupy sites within a stacking of trigonal antiprisms formed by Ch atoms. The location of the M site varies between extremes with trigonal antiprismatic (CN6) and trigonal planar (CN3) geometry. Partial occupation of these sites and intermediate ones accounts for the considerable versatility of these structures and the occurrence of large metal displacement parameters. The site occupations can be understood in a simple way as being driven by the need to satisfy appropriate bond valence sums for both the M and Ch atoms. Band structure calculations rationalize the substoichiometry observed in the Ag-containing compounds (La{sub 3}Ag{sub 0.6}GaS{sub 7}, La{sub 3}Ag{sub 0.6}GaSe{sub 7}) as a response to overbonding. X-ray photoelectron spectroscopy supports the presence of monovalent Ag atoms in these compounds, which are not charge-balanced. - Graphical abstract: Partial occupation of metal atoms in multiple sites accounts for versatility in Ga-containing chalcogenides La{sub 3}M{sub 1–x}GaCh{sub 7} with noncentrosymmetric hexagonal structures. - Highlights: • La{sub 3}M{sub 1–x}GaCh{sub 7} (M =Ga, Ag, Zn, Cd; Ch =S, Se) adopt related hexagonal structures. • Large displacements of M atoms originate from partial occupation of multiple sites. • Bond valence sum arguments give a simple explanation for site preference. • XPS studies confirm presence of monovalent Ag in La{sub 3}Ag{sub 0.6}GaCh{sub 7}. • Substoichiometry in La{sub 3}Ag{sub 0.6}GaCh{sub 7} avoids occupation of Ag–Ch antibonding levels.

36 MATERIALS SCIENCE↗

Ag@ZnO core-shell nanoparticles study by first principle: The structural, magnetic and optical properties

Ag@ZnO core-shell nanoparticles of around 72 atoms have been investigated by the density functional theory, revealing proving for the first time that the core-shell structure exhibits a shrinkage phenomenon from outer shell in agreement with the other studies in literatures. Our calculations predict that the Ag@ZnO core-shell structure is a ferromagnetic spin polarized state, and the magnetism mainly stems from the spin splitting of 2p electrons of O atoms. In addition, the total and partial DOS of Ag@ZnO indicate that the nanostructure is a half-metallic nanoparticle and has the characters of the p-type semiconductor. Furthermore, the optical properties calculations show that the absorption edge of Ag@ZnO have a red shift and good photocatalysis compare to that of the bulk ZnO. These results of the Ag@ZnO core-shell structure obtain a well agreement with the experimental measurement. - Graphical abstract: Geometric structure of (a) Ag@ZnO core-shell nanostructure; (b) the core of Ag; (c) the shell of ZnO The core-shell nanoparticle Ag@ZnO contains Ag inner core of radius of 4 Å and ZnO outer shell with thickness of 2 Å. Ag@ZnO core-shell nanoparticles of around 72 atoms have been proved for the first time that the core-shell structure exhibit a shrinkage phenomenon from outer shell. Our calculations predict that the Ag@ZnO core-shell structure is a half-metallic nanoparticle and has the characters of the p-type semiconductor. The absorption edge of Ag@ZnO have a red shift and get good photo-catalysis compare to that of the bulk ZnO.

36 MATERIALS SCIENCE↗

Structure and decomposition of the silver formate Ag(HCO{sub 2})

Crystal structure of the silver formate Ag(HCO{sub 2}) has been determined (orthorhombic, sp.gr. Pccn, a=7.1199(5), b=10.3737(4), c=6.4701(3)Å, V=477.88(4) Å{sup 3}, Z=8). The structure contains isolated formate ions and the pairs Ag{sub 2}{sup 2+} which form the layers in (001) planes (the shortest Ag–Ag distances is 2.919 in the pair and 3.421 and 3.716 Å between the nearest Ag atoms of adjacent pairs). Silver formate is unstable compound which decompose spontaneously vs time. Decomposition was studied using Rietveld analysis of the powder diffraction patterns. It was concluded that the diffusion of Ag atoms leads to the formation of plate-like metal particles as nuclei in the (100) planes which settle parallel to (001) planes of the silver formate matrix. - Highlights: • Silver formate Ag(HCO{sub 2}) was synthesized and characterized. • Layered packing of Ag-Ag pairs in the structure was found. • Decomposition of Ag(HCO{sub 2}) and formation of metal phase were studied. • Rietveld-refined micro-structural characteristics during decomposition reveal the space relationship between the matrix structure and forming Ag phase REPLACE with: Space relationship between the matrix structure and forming Ag phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering metal–metal oxide surfaces for high-performance oxygen reduction on Ag–Mn electrocatalysts

Understanding fundamental material–property relationships in mixed-element catalyst systems is crucial to advancing the viability of renewable electrochemical energy technologies, an important part of creating a more sustainable future. Herein, we report our insight on the nature and dynamics of highly active silver–manganese oxide (Ag–MnOx) catalyst surfaces for the oxygen reduction reaction (ORR) via a combined experimental–theoretical approach. Experimentally, we synthesize well-mixed Ag–Mn co-deposited thin films that are measurably flat and smooth, despite Mn surface migration and oxidation upon air exposure and electrochemical measurements. Cyclic voltammetry in 0.1 M KOH demonstrates up to 10-fold specific activity enhancements over pure Ag at 0.8 V vs. RHE for Ag-rich films (70–95% Ag in bulk). To further understand the Ag–Mn system, separate samples were synthesized with small amounts of Mn sequentially deposited onto the surface of a pure Ag thin film (Mn@Ag), ranging from partial to full surface coverage (down to 0.3 nm Mn $cm^{-2}_{geo}$ ~ 0.2 μg Mn $cm^{-2}_{geo}$). These sequentially deposited Mn@Ag films show analogous performance to their co-deposited counterparts indicating similar enhanced active sites. With density functional theory (DFT), we calculate that this enhancement arises from the tuned d-band of these material surfaces owing to the optimal hybridization of the electronic structures in specific Ag and MnO x geometries. Together, electrochemical measurements, DFT calculations, X-ray absorption spectroscopy, and valence-band X-ray photoelectron spectroscopy suggest synergistic electronic interactions between Ag and MnOx yield enhanced oxygen adsorption, and thus ORR activity, with DFT highlighting the Ag–MnO x interface sites as the most enhanced. This work demonstrates how combined experimental–theoretical methods can help design electrocatalysts with enhanced electrocatalytic properties and understand the nature of complex mixed metal–metal oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The isotopic composition and concentration of Ag in iron meteorites and the origin of exotic silver

The isotopic composition of Ag and the concentration of Ag and Pd in Canyon Diablo (IA), Grant (IIIB), Santa Clara, Tlacotepec and Warburton Range (IVB), Pinon and Deep Springs (anom) were analyzed. Troilite from Santa Clara and from Grant was also studied. With the exception of IA, all the meteorites were enriched in Ag-107 by about 2%-212% and the ratio of Ag-107/Ag-109 in the metal phase was found to be greater than the terrestrial value. Ag of anomalous isotopic composition was found to be common in all IVB and anomalous meteorites. A correlation of Ag-107/Ag-109 with Pd/Ag was established except for the iron meteorite of Santa Clara. The excess Ag-107 is thought to result from the decay of Pd-107. The Grant data appear to represent a Pd-107-Ag-107 isochron and indicate that the cooling rate at elevated temperatures was rapid enough to preserve the isotopic differences between metal and troilite. The data suggest that Ag in Santa Clara is made up of almost pure Ag-107 produced from Pd-107 decay and Ag-109 produced by nuclear reactions with only a small amount of 'normal' Ag. This indicates an intense energetic particle bombardment history in the early solar system which occurred after the formation of small planetary bodies.

Kaiser, T.↗

Crystal growth and properties of Ln{sub 2}Ag{sub 1-x}Ga{sub 10-y} (Ln=La, Ce), a disordered variant of the Ce{sub 2}NiGa{sub 10}-structure type

We report the flux growth and characterization of Ln{sub 2}Ag{sub 1-x}Ga{sub 10-y} (Ln=La, Ce), a disordered variant of the Ce{sub 2}NiGa{sub 10} structure type. Single crystals of La{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.6) and Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) were grown by the self-flux method and characterized using single-crystal X-ray diffraction. Transport measurements of Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) reveal metallic behavior with a transition at 3 K. Magnetic measurements indicate antiferromagnetic ordering at 3 K of localized Ce{sup 3+} moments for Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y}. Magnetoresistance is positive with a maximum value of 16% at 9 T. La{sub 2}Ag{sub 1-x}Ga{sub 10-y} exhibits metallic behavior with magnetic susceptibility showing temperature independent paramagnetism. We will compare Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) to Ce{sub 2}NiGa{sub 10} to examine the effects of transition metal substitution and to the related Ce(Ag,Ga){sub 4} phase to examine the effects of crystal structure on the physical properties. - Graphical abstract: The figure illustrates the structure of Ce{sub 2}Ag{sub 0.7(1)}Ga{sub 9.1(1)}, which can be described as a distorted variant of the Ce{sub 2}NiGa{sub 10} structure. The distorted gallium segments are best described as variants of CeGa{sub 6} (PuGa{sub 6}-structure type), and the distorted Ce(Ag,Ga){sub 4}-type segments are built of layers of face-sharing tetragonal antiprisms. Here M=Ag+Ga and the shaded atoms are partially occupied.

36 MATERIALS SCIENCE↗

Solubility and microstructure in the pseudo-binary PbTe-Ag{sub 2}Te system

The solvus lines of the PbTe and Ag{sub 2}Te phases in the pseudo-binary PbTe-Ag{sub 2}Te system have been determined using diffusion couples and unidirectional solidification by the Bridgman method. The solubilities of both Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te decrease with decrease in temperature. For the former, this change is from 14.9 at% Ag (694 deg. C) to 0.5 at% Ag (375 deg. C), while for the latter it is from 12.4 at% Pb (650 deg. C) to 3.1 at% Pb (375 deg. C). The decrease in solubilities leads to the formation of precipitates of Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te. In particular, fast atomic diffusion in Ag{sub 2}Te results in the precipitation of PbTe even in quenched samples. From the temperature dependence of these solubilities, heats of solution have been determined. In the diffusion couple, the phase boundary moves toward PbTe. In the region between the phase boundary and the initial interface, PbTe transforms to {beta}-Ag{sub 2}Te (cubic) retaining the cube-on-cube orientation relationship. - Graphical abstract: The precipitation in the diffusion couple in fast cooling suggests high chemical diffusivity. The large heat of solution for the Ag{sub 2} Te dissolution in PbTe leads to fine microstructure. Highlights: > The solvus lines were determined by diffusion couples and unidirectional solidification. > The solubilities in both phases decrease with decrease in temperature. > Chemical diffusivity in Ag2Te phase is high. > Heat of solution is one of the key parameters to control the number density of precipitates. > The Ag2Te phase transformed from PbTe in diffusion couples holds the cube-on-cube relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The new silver borate Ag{sub 3}B{sub 5}O{sub 9}

Single crystals of Ag{sub 3}B{sub 5}O{sub 9} were obtained via high-pressure synthesis at 3 GPa and 600 °C, using a Walker-type multianvil high-pressure device. Ag{sub 3}B{sub 5}O{sub 9} crystalizes with a=674.7(2), b=943.5(2), c=1103.5(2) pm, V=0.7025(2) nm{sup 3}, and Z=4 in the noncentrosymmetric space group P2{sub 1}2{sub 1}2{sub 1} (no. 19). The orthorhombic structure was refined from 3740 independent reflections with R1=0.0496 and wR2=0.587 (all data). It is built up from infinite corner-sharing chains of BO{sub 4} tetrahedra along the a axis, which are interconnected by BO{sub 3} groups to form a network. In the structure, three crystallographically independent sites are occupied with Ag{sup +} cations exhibiting argentophillic interactions. The synthetic conditions as well as the results of the single crystal structure analysis are presented. - Graphical abstract: Noncentrosymmetric silver borate: During investigations in the system Ag–B–O, a new noncentrosymmetric silver borate Ag{sub 3}B{sub 5}O{sub 9} was discovered. The new structure type is built up from corner-sharing BO{sub 3} and BO{sub 4} groups, forming a network. Argentophillic interactions are clearly indicated by the Ag{sup +}⋯Ag{sup +} distances present in the structure. - Highlights: • A noncentrosymmetric borate Ag{sub 3}B{sub 5}O{sub 9} is accessible via high-pressure synthesis. • Ag{sub 3}B{sub 5}O{sub 9} is the second high-pressure silver borate. • Ag{sup +}⋯Ag{sup +} distances in Ag3B5O9 clearly indicate the presence of argentophillic interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗