Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence J - Raw Data

Sequences H, I, and J: Upwind Baseline (F), Upwind Low Pitch (F), Upwind High Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of –30° to 180° were achieved at low wind speeds, and angles of ±10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence H, 0° for sequence I, and 6° for sequence J. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. In addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s. These 6-minute campaigns were collected while the yaw drive rotated the turbine 360° at a rate of 1°/s. The file names for these campaigns use the letter designation, followed by two digits for wind speed, followed by YS, followed by 000.

17 WIND ENERGY↗
DOE OSTI2020

US East Coast synthetic aperture radar wind atlas for offshore wind energy

We present the first synthetic aperture radar (SAR) offshore wind atlas of the US East Coast from Georgia to the Canadian border. Images from RADARSAT-1, Envisat, and Sentinel-1A/B are processed to wind maps using the geophysical model function (GMF) CMOD5.N. Extensive comparisons with 6008 collocated buoy observations of the wind speed reveal that biases of the individual systems range from -0.8 to 0.6 m s -1 . Unbiased wind retrievals are crucial for producing an accurate wind atlas, and intercalibration of the SAR observations is therefore applied. Wind retrievals from the intercalibrated SAR observations show biases in the range of to -0.2 to 0.0 m s -1 , while at the same time improving the root-mean-squared error from 1.67 to 1.46 m s -1 . The intercalibrated SAR observations are, for the first time, aggregated to create a wind atlas at the height 10 m a.s.l. (above sea level). The SAR wind atlas is used as a reference to study wind resources derived from the Wind Integration National Dataset Toolkit (WTK), which is based on 7 years of modelling output from the Weather Research and Forecasting (WRF) model. Comparisons focus on the spatial variation in wind resources and show that model outputs lead to lower coastal wind speed gradients than those derived from SAR. Areas designated for offshore wind development by the Bureau of Ocean Energy Management are investigated in more detail; the wind resources in terms of the mean wind speed show spatial variations within each designated area between 0.3 and 0.5 m s -1 for SAR and less than 0.2m s -1 for the WTK. Our findings indicate that wind speed gradients and variations might be underestimated in mesoscale model outputs along the US East Coast.

17 WIND ENERGY↗
DOE OSTI2022

High-Resolution Wind Resource Data Set of the Greater Puerto Rico Region

In February 2022, the U.S. Department of Energy and six national laboratories launched the Puerto Rico Grid Resilience and Transitions to 100% Renewable Energy Study (PR100). PR100 aims to provide a comprehensive analysis of possible pathways for Puerto Rico's energy future, with a goal of 100% renewable energy by 2050. As a part of the renewable energy potential assessment in this project, we developed 20 years (2001-2020) of data using a numerical weather prediction (NWP) model for onshore and offshore wind resource assessment for the Puerto Rico. The research steps in developing the long-term wind resource data sets based on the NWP model were: 1. Model wind resource based on the Weather Research and Forecasting (WRF) model. 2. Develop WRF model configurations for Puerto Rico. 3. Test WRF with 11 different physics parameterizations for planetary boundary layer (PBL). 4. Assess WRF output from the different PBL schemes against observations. 5. Select a final model configuration which can produce the modeled wind speed with sufficient accuracy. 6. Produce 20 years wind resource data sets for Puerto Rico region. In the first stage of our framework for developing wind resource data, we developed a WRF model configuration using two nested domains (9 km and 3 km) to cover Puerto Rico and U.S. Virgin Islands and downscale the ERA5 reanalysis data (0.25 degrees x 0.25 degrees; hourly interval) to a 3-km domain. For the second stage, we implemented one-year simulations focused on using 11 different PBL physics parameterizations to find a combination of WRF physics parameterizations that could provide accurately modeled wind speed for Puerto Rico. We also analyzed the sensitivity of the modeled wind speed to PBL schemes for onshore and offshore locations. The WRF output resulting from the 11 WRF experiments using different PBL parameterizations were evaluated against observations obtained from the National Data Buoy Center (NDBC) as well as at hub height for a location for which measurements were available. A final model setup selected through the validation with observational data was used to produce 20 years of data with 3-km spatial and 5-minute temporal resolution. The WRF model output was post-processed to include wind profiles and basic atmospheric variables in a format that can be easily used for downstream modeling. The 20 years of wind resource data will be made available through NREL and support the estimation of wind energy development costs for the PR100 study.

17 WIND ENERGY↗
DOE OSTI2023

Predicting Wind Loading and Instability in Solar Tracking PV Arrays

Wind loading and the fluctuating pressure loads it creates on PV panel surfaces are associated with multiple degradation mechanisms and failures. Modest wind speeds create reversing loads that can initiate cell cracks and weather cracked cells. Stronger wind speeds and extreme weather events can lead to larger scale forces and the aerodynamic instability known as torsional galloping. All these effects are dependent on the complex coupling between wind speed, panel orientation, and a myriad of other hardware and site-specific factors. In this work, we present the latest developments from our work to build an open-source, high-performance computing (HPC) fluid dynamics solver to predict and mitigate these effects. This simulation package allows users to easily specify different array layouts, solar-tracking angles, panel geometries, and weather conditions before automatically generating a refined computational mesh and solving for the unsteady loading on each panel surface. Small domains (e.g., a single panel row in isolation) can be solved on a modern laptop, while larger domains or very high-fidelity studies can be solved on distributed or HPC resources with minimal modifications to the underlying problem specification. We present preliminary case studies obtained using this simulation package and highlight how increased wind speeds combined with sub-optimal tracking angles can exacerbate degradation drivers.

aerodynamics↗
DOE OSTI2023

A new process-based and scale-aware desert dust emission scheme for global climate models – Part I: Description and evaluation against inverse modeling emissions

Desert dust accounts for most of the atmosphere's aerosol burden by mass and produces numerous important impacts on the Earth system. However, current global climate models (GCMs) and land-surface models (LSMs) struggle to accurately represent key dust emission processes, in part because of inadequate representations of soil particle sizes that affect the dust emission threshold, surface roughness elements that absorb wind momentum, and boundary-layer characteristics that control wind fluctuations. Furthermore, because dust emission is driven by small-scale (~ 1 km or smaller) processes, simulating the global cycle of desert dust in GCMs with coarse horizontal resolutions (~ 100 km) presents a fundamental challenge. This representation problem is exacerbated by dust emission fluxes scaling nonlinearly with wind speed above a threshold wind speed that is sensitive to land-surface characteristics. Here, we address these fundamental problems underlying the simulation of dust emissions in GCMs and LSMs by developing improved descriptions of (1) the effect of soil texture on the dust emission threshold, (2) the effects of nonerodible roughness elements (both rocks and green vegetation) on the surface wind stress, and (3) the effects of boundary-layer turbulence on driving intermittent dust emissions. We then use the resulting revised dust emission parameterization to simulate global dust emissions in a standalone model forced by reanalysis meteorology and land-surface fields. We further propose (4) a simple methodology to rescale lower-resolution dust emission simulations to match the spatial variability of higher-resolution emission simulations in GCMs. The resulting dust emission simulation shows substantially improved agreement against regional dust emissions observationally constrained by inverse modeling. We thus find that our revised dust emission parameterization can substantially improve dust emission simulations in GCMs and LSMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantifying vertical wind shear effects in shallow cumulus clouds over Amazonia

Abstract. This study analyses and quantifies the effects of vertical wind shear (VWS) on the properties of shallow cumulus cloud fields over Central Amazonia. We perform idealised simulations with high resolution (50 m horizontally and 20 m vertically) using the Dutch Atmospheric Large-Eddy Simulation (DALES) model, changing the initial conditions and large-scale forcing of VWS. The resulting cloud field is analysed by applying a cloud tracking algorithm to generate Lagrangian datasets of the life cycle of individual clouds as well as their time-varying core and margin dimensions. The reference run has no wind speed or directional shear and represents a typical day in the local dry season. Numerical experiments with moderate and high wind speed shear are simulated by adding linear increases in the wind speed of 1.2 and 2.4 m s−1 km−1, respectively. Three additional runs are made by adding 90∘ of wind rotation between the surface and the top of the domain (5 km) on top of the three wind speed shear conditions. We find that clouds developing in a sheared environment have horizontal equivalent diameter increased by up to 100 m on average, but the cloud depth is reduced. Our quantification shows that VWS tends to increase the size of the cloud cores but reduces their relative area, volume, and mass fractions compared to the overall cloud dimensions. The addition of 2.4 m s−1 km−1 of VWS decreases the relative core area by about 0.03 (about 10 % of the overall average) and its volume and mass ratios by about 0.05 (10 %–25 % in relative terms). Relevant for the cloud transport properties is that the updraught speed and the liquid water content are lower within the cores, and consequently so is the upward mass flux. All quantifications of mean cloud properties point to the inhibition of convective strength by VWS, therefore hampering the shallow-to-deep transition. However, open questions still remain given that the individually deepest clouds were simulated under high environmental shear, even though they occur in small numbers. This could indicate other indirect effects of VWS that have opposite effects on cloud development if found to be significant in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Identifying Meteorological Drivers for Errors in Modeled Winds along the Northern California Coast

Abstract An accurate wind resource dataset is required for assessing the potential energy yield of floating offshore wind farms that are expected along the California outer continental shelf. The National Renewable Energy Laboratory has developed and disseminated an updated wind resource dataset offshore of California, using the Weather Research and Forecasting Model, referred to as the CA20 dataset. As compared to buoy lidar measurements that have become available recently, the CA20 dataset showed significant positive biases for 100-m wind speeds along Northern California wind energy lease areas. To investigate the meteorological drivers for the model errors, we first consider two 1-yr simulations run with two different planetary boundary layer (PBL) parameterizations: the Mellor–Yamada–Nakanishi–Niino (MYNN) PBL scheme (the chosen configuration in the CA20 dataset) and the Yonsei University PBL scheme (which significantly reduces the bias in modeled winds). By comparing the 1-yr simulations to the concurrent lidar buoy observations, we find that errors are larger with the MYNN PBL scheme in warm seasons. We then dive deeper into the analysis by running simulations for short-term (3-day) case studies to evaluate the sensitivity of initial/boundary condition forcings on model results. By analyzing the short-term simulations, we find that during synoptic-scale northerly flows driven by the North Pacific high and inland thermal low, a coastal warm bias in the MYNN simulation is mainly responsible for the modeled wind speed bias by altering the boundary layer thermodynamics. The results of our analysis will help guide the creation of an updated version of the CA20 dataset.

17 WIND ENERGY↗
DOE OSTI2024

Misaligned Wind‐Waves Behind Atmospheric Cold Fronts

Abstract Atmospheric fronts embedded in extratropical cyclones are high‐impact weather phenomena, contributing significantly to mid‐latitude winter precipitation. The three vital characteristics of the atmospheric fronts, high wind speeds, abrupt change in wind direction, and rapid translation, force the induced surface waves to be misaligned with winds exclusively behind the cold fronts. The effects of the misaligned waves under atmospheric cold fronts on air‐sea fluxes remain undocumented. Using the multi‐year in situ near‐surface observations and direct covariance flux measurements from the Pioneer Array off the coast of New England, we find that the majority of the passing cold fronts generate misaligned waves behind the cold front. Once generated, the waves remain misaligned, on average, for about 8 hr. The parameterized effect of misaligned waves in a fully coupled model significantly increases the roughness length (185%), drag coefficient (19%), and air‐sea momentum flux (11%). The increased surface drag reduces the wind speeds in the surface layer. The upward turbulent heat flux is weakly decreased by the misaligned waves because of the decrease in temperature and humidity scaling parameters being greater than the increase in friction velocity. The misaligned wave effect is not accurately represented in a commonly used wave‐based bulk flux algorithm. Yet, considering this effect in the current formulation improves the overall accuracy of parameterized momentum flux estimates. The results imply that better representing a directional wind‐wave coupling in the bulk formula of the numerical models may help improve the air‐sea interaction simulations under the passing atmospheric fronts in the mid‐latitudes.

Oceanography↗
DOE OSTI2020

Using a coupled dispersion model to estimate depletion of a tritium oxide plume by a forest

Tritium processing facilities may release tritium oxide (HTO) to the atmosphere which poses potential health risks to exposed co-located workers and to offsite individuals. Most radiological consequence analyses determine HTO dose by applying Gaussian plume models to simulate the transport of HTO. Within these models, deposition velocity is used to assess the sum of all deposition processes acting on the plume. While this may account for vegetative and soil uptake or respiration processes, it may currently lack inclusion of the complex interactions within heterogeneous forested environments. In this complex morphology, dispersion patterns are significantly altered by changing flow regimes above and below the forest canopy and by the transfer of plume material across the canopy boundary. To determine the effects of a heterogeneous forest canopy on an airborne HTO plume, a Gaussian plume model coupled with an advection-diffusion plume model was applied to estimate transport in the free atmosphere above the forest and within the forest canopy and understory. During 2012, wind speed and wind direction measurements taken at 5 heights, ranging from 2-m to 28-m, on an instrumented meteorological tower located in a loblolly pine forest at the Department of Energy (DOE) Savannah River Site (SRS), near Aiken, SC. From these measurements, model predictions were made over a full spectrum of meteorological conditions. Deposition and resuspension velocities were calculated based on the model-predicted flux of plume material across the top of the forest canopy. Additionally, net deposition velocity of the plume material was calculated as the difference between the deposition and resuspension velocities. The 1st and 5th percentile net deposition velocities were estimated to be 0.7 cm s-1 and 1.2 cm s-1, respectively.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2020

Large-eddy simulations of the Northeastern US coastal marine boundary layer

In this study, large eddy simulations (LES) of offshore boundary layers near the Nantucket coast are performed using Nalu-Wind. The marine boundary layer conditions are chosen to match the predominantly unstable and neutral conditions measured by the Cape Wind platform. The appropriate domain, resolution, and boundary condition settings required for the LES are established through this work. Differences between stable and unstable cases are found in the wind speed profiles, averaged statistics, and wind spectra, and explained in terms of stratification effects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Projecting Future Energy Production from Operating Wind Farms in North America. Part I: Dynamical Downscaling

Abstract New simulations at 12-km grid spacing with the Weather and Research Forecasting (WRF) Model nested in the MPI Earth System Model (ESM) are used to quantify possible changes in wind power generation potential as a result of global warming. Annual capacity factors (CF; measures of electrical power production) computed by applying a power curve to hourly wind speeds at wind turbine hub height from this simulation are also used to illustrate the pitfalls in seeking to infer changes in wind power generation directly from low-spatial-resolution and time-averaged ESM output. WRF-derived CF are evaluated using observed daily CF from operating wind farms. The spatial correlation coefficient between modeled and observed mean CF is 0.65, and the root-mean-square error is 5.4 percentage points. Output from the MPI-WRF Model chain also captures some of the seasonal variability and the probability distribution of daily CF at operating wind farms. Projections of mean annual CF (CF A ) indicate no change to 2050 in the southern Great Plains and Northeast. Interannual variability of CF A increases in the Midwest, and CF A declines by up to 2 percentage points in the northern Great Plains. The probability of wind droughts (extended periods with anomalously low production) and wind bonus periods (high production) remains unchanged over most of the eastern United States. The probability of wind bonus periods exhibits some evidence of higher values over the Midwest in the 2040s, whereas the converse is true over the northern Great Plains. Significance Statement Wind energy is playing an increasingly important role in low-carbon-emission electricity generation. It is a “weather dependent” renewable energy source, and thus changes in the global atmosphere may cause changes in regional wind power production (PP) potential. We use PP data from operating wind farms to demonstrate that regional simulations exhibit skill in capturing actual power production. Projections to the middle of this century indicate that over most of North America east of the Rocky Mountains annual expected PP is largely unchanged, as is the probability of extended periods of anomalously high or low production. Any small declines in annual PP are of much smaller magnitude than changes due to technological innovation over the last two decades.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Understanding the Spatiotemporal Variability of Tropical Orographic Rainfall Using Convective Plume Buoyancy

Abstract Mechanical forcing by orography affects precipitating convection across many tropical regions, but controls on the intensity and horizontal extent of the orographic precipitation peak and rain shadow remain poorly understood. A recent theory explains this control of precipitation as arising from modulation of lower-tropospheric temperature and moisture by orographic mechanical forcing, setting the distribution of convective rainfall by controlling parcel buoyancy. Using satellite and reanalysis data, we evaluate this theory by investigating spatiotemporal precipitation variations in six mountainous tropical regions spanning South and Southeast Asia, and the Maritime Continent. We show that a strong relationship holds in these regions between daily precipitation and a measure of convective plume buoyancy. This measure depends on boundary layer thermodynamic properties and lower-free-tropospheric moisture and temperature. Consistent with the theory, temporal variations in lower-free-tropospheric temperature are primarily modulated by orographic mechanical lifting through changes in cross-slope wind speed. However, winds directed along background horizontal moisture gradients also influence lower-tropospheric moisture variations in some regions. The buoyancy measure is also shown to explain many aspects of the spatial patterns of precipitation. Finally, we present a linear model with two horizontal dimensions that combines mountain wave dynamics with a linearized closure exploiting the relationship between precipitation and plume buoyancy. In some regions, this model skillfully captures the spatial structure and intensity of rainfall; it underestimates rainfall in regions where time-mean ascent in large-scale convergence zones shapes lower-tropospheric humidity. Overall, these results provide new understanding of fundamental processes controlling subseasonal and spatial variations in tropical orographic precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Estimation of the Ambient Wind Field From Wind Turbine Measurements Using Gaussian Process Regression

In the search for a lower levelized cost of wind energy, one approach is to increase the accuracy of wind turbine measurements such as wind speed and wind direction. The sensors available on wind turbines are susceptible to local turbulence and measurement bias, which can result in suboptimal turbine performance. As an alternative, recent research has considered using the sensor measurements in a coordinated manner. With such a cooperative approach, the local wind conditions can be estimated more accurately and reliably without the need for additional measurement equipment. In this paper, a novel wind field estimation approach is presented that estimates the local wind conditions based on turbine measurements using Gaussian processes. We show that the estimation framework is able to improve the accuracy of the wind direction estimate both in an offline and online manner, as well as identify possible biases in the sensors and reduce unnecessary wind turbine yaw activity.

49 EE - Wind and Water Power Program - Wind (EE-4W↗