Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparative Evaluation of the Ability of the MYNN‐EDMF PBL Scheme in WRF Model to Reproduce Near Surface Wind Speed Over Different Topographical Types

Abstract This study systematically evaluates the performance of the Mellor‐Yamada‐Nakanishi‐Niino‐Eddy‐Diffusion‐Mass‐Flux planetary boundary layer (PBL) scheme within the Weather Research and Forecasting (WRF) model in simulating near‐surface wind speeds across various topographies in New York State (NYS). Simulated wind speeds are compared with in‐situ measurements from 22 surface sites, grouped into six topographic categories: continental plain (CT), lakeside (LS), river valley (RV), Long Island (LI), Block Island (BI), and offshore ocean (OO). A quantitative evaluation based on Relative Euclidean Distance shows that wind speeds at the OO site are the most accurately reproduced, followed by those at LI sites, while the model performs less accurately for the remaining topographic groups. Wind speeds over CT sites tend to be overestimated by approximately 1 m/s, although their diurnal variability (DV) is well captured. In contrast, the model underestimates wind DV at LS, RV, LI, and BI sites, with the largest biases occurring at LI and BI, resulting in underestimated daytime wind speed and/or overestimated nighttime wind speed. The OO winds exhibit minimal diurnal variation, accurately captured by our WRF model. The surface wind diurnal variation is closely linked to PBL development. Among the indicators of PBL development, surface potential temperature biases most strongly correlate with wind speed biases. Our WRF model faces challenges in capturing the distinctions between winds influenced by local circulations and those over continental plains, and the significantly stronger winds at OO compared to BI. Potential causes for these biases are discussed, offering pathways for improving surface wind simulations in future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

LiDAR Measurements to Investigate Farm-to-Farm Interactions at the AWAKEN Experiment

The exponential growth of wind energy and the need to exploit wind resources over areas with higher energy potential have led to the construction of neighboring wind turbines and farms with relatively small separation distances. As a result, for specific wind and atmospheric conditions, the wakes generated by an upstream wind farm may affect wind resources available for a downstream wind farm resulting in detrimental impacts on energy harvesting and structural loads for the downwind wind turbines. Distances between neighboring wind farms are typically larger than those associated with intra-wind-farm wake interactions, generating cumulative wakes whose characteristics might differ from those predicted through classical engineering wake models. These phenomena are referred to as farm-to-farm interactions. A better understanding and characterization of farm-to-farm interactions is one of the science goals tackled by the ongoing American WAKE experimeNt (AWAKEN). The site under investigation for this field campaign comprises two large wind farms in northern Oklahoma, USA, which are spaced roughly 5km apart along the prevailing South-North wind direction. To investigate possible interactions between these two wind farms, the WindFluX mobile LiDAR station has been deployed mainly to perform volumetric scans over their gap region. In this paper, preliminary results from these LiDAR volumetric scans will be discussed, specifically for a case with multiple wind turbine wakes evolving during the occurrence of a low-level jet.

17 WIND ENERGY↗
DOE OSTI2023

The Hidden Flexibility of the Natural Gas Network for Electric Power Operations: A Case Study of a Near-Miss Winter Event

The U.S. power sector has become increasingly reliant on gas pipeline networks to deliver fuel to natural gas power plants. In addition to supplying relatively low-cost fuel, gas networks offer generators flexibility in their operations through the ability to deliver fuel when needed by using gas storage facilities or linepack if the gas network is at an operating point below its design capacity. However, disruptions or stress events on the gas network - like those occurring in the Northeast and Texas in recent years - can result in limitations on gas availability to generators at times when generation is in short supply. Here we examine a period of stress that occurred in the winter of 2022 in the Western United States. Using data on the region's natural gas pipeline network and electric generators, we build an integrated gas and electric model that closely replicates the actual dispatch of the period. We then evaluate the implications of removing flexibility employed by the gas network operator, which during that period curtailed scheduled gas deliveries to other parties to increase deliveries to natural gas power plants, which requested more gas than initially forecasted. We find that without the flexibility supplied by the gas network operator, there would have been curtailment of gas generation due to gas offtake constraints, requiring the power system operator to redispatch relying on more expensive generation or to potentially shed load. A sensitivity exploring a wind drought further exacerbates the strain, illustrating the potential challenge of managing gas and grid interactions as systems move to higher shares of variable renewable electricity. Based on this example, we discuss potential coordination strategies between the two system operators to ensure that the power system can successfully utilize and rely on the flexibility offered by natural gas networks.

03 NATURAL GAS↗
DOE OSTI2025

5-minute Wind Power Data based on WFIP2 WRF Simulation

The second Wind Forecast Improvement Project (WFIP2) was a public-private partnership funded by the U.S. Department of Energy and NOAA, aimed at enhancing the forecast skill of numerical weather prediction models for turbine-height winds in regions with complex terrain. An 18-month Weather Research and Forecasting (WRF) model simulation was conducted over the Pacific Northwest, with model outputs validated against observational data collected during WFIP2. Simulated wind speeds were used to estimate wind power generation using reV (the Renewable Energy Potential Model developed by NREL) at ten wind project sites. Two sets of results were produced: one using wind speeds extracted from the model grid cell at the project centroid, and another using wind speeds from the actual turbine locations. For each dataset, power output was calculated using both actual turbine-specific power curves and nine generic power curves to convert wind speed into power.

17 WIND ENERGY↗
DOE OSTI2023

Observed impacts of large wind farms on grassland carbon cycling

Deployment of wind energy is an essential renewable energy source that mitigates climate change and reduces air pollution. Over the last several decades, wind energy development has increased worldwide, expanding from ~20 to ~900 GW (gigawatt) during 2001-2022. Nonetheless, researchers have identified unintended consequences of wind energy on microclimate via turbine-altered surface-atmosphere exchanges of energy, momentum, mass, and trace gases. Based on multi-source observations and models, researchers also have drawn some conclusions that wind farms could warm the land surface, especially at night, at regional and continental scales. Consequently, altered microclimates at wind farms may affect vegetation productivity and carbon sequestration, two critically important ecosystem services related to carbon dynamics; however, such potential impacts and driving mechanisms remain poorly understood. Wind energy deployment is increasing globally to meet carbon neutrality goals, with upscaling of onshore wind power capacity projected to grow from 542 GW in 2018 to 1787 and 5044 GW by 2030 and 2050, respectively. Furthermore, increased demand for wind energy deployment may lead to much larger wind farms in open, expansive landscapes. In turn, a large array of geographically clustered wind turbines could collectively modify local microclimate and amplify turbine-atmosphere interactions, which, if large enough, may produce detectable impacts on ecosystem dynamics. Thus, identifying and quantifying the potential impacts of wind farms on carbon-related ecosystem services may facilitate sustainable wind energy development globally.

17 WIND ENERGY↗
DOE OSTI2025

Large-scale offshore wind farm effects on weather and climate in Puerto Rico (Final Technical Report)

Puerto Rico’s current electricity generation heavily relies on imported fossil fuels. This results in an average cost of electricity higher than the U.S. mainland average in all sectors (residential, commercial, and industrial), despite abundant local offshore wind resources, which have the potential to provide secure, low-cost energy generation and consequent economic prosperity. However, effects on atmospheric and oceanic circulation resulting from large-scale deployments of offshore wind farms have not been previously studied at tropical latitude. This project addressed this knowledge gap through a computational modeling effort designed to capture the coupled dynamics of the atmosphere and the ocean in presence of offshore wind farms. Results indicate that wind farm wakes can alter wind stress, generate Ekman-driven vertical transport, and potentially affect nutrient distribution. While full model coupling remains challenging, progress in parameterization and large-eddy simulations provides a foundation for future research. The project contributes to DOE’s Earth System modeling efforts and supports STEM workforce development.

17 WIND ENERGY↗
DOE OSTI2022

Process-based climate change assessment for European winds using EURO-CORDEX and global models

Wind energy is an important pillar of decarbonization strategies and potentially vulnerable to climate change. Existing wind climate change assessments rely on climate models but a systematic investigation of the global-to-regional climate modeling chain is missing. In this study, I highlight key limitations, namely (a) the differing representation of land use change in global and regional climate models which compromises comparability, and (b) the consistency of large-scale features along the global-to-regional climate modeling chain. To this end, I analyze the large European Coordinated Downscaling Experiment (EURO-CORDEX) ensemble (rcp85: N = 49; rcp45: N= 18; rcp26: N = 22) along with the driving global models (rcp85: N = 7; rcp45: N = 5; rcp26: N = 7), finding evidence that climate change reduces mean wind speeds by up to -0.8 ms -1 (offshore) and -0.3 ms -1 (onshore). I provide physical explanations for these changes by identifying two key drivers. First, onshore wind speeds drop in the driving global models in regions and scenarios with strong land use change but show no drop in EURO-CORDEX where land use is held constant. Second, offshore wind reductions follow decreases in the equator-to-pole temperature gradient remarkably well with correlations reaching around 0.9 in resource-rich European countries like Ireland, the United Kingdom and Norway, implying that arctic amplification is a severe risk for European offshore wind energy. My results suggest that earlier conclusions of negligible climate change impacts on wind energy might be premature if either land use changes strongly or polar amplification is at or above the range sampled in global climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

National Wind Workforce Assessment: Educators to Students [Slides]

As a part of the National Wind Workforce Assessment, four presentations have been created in conjunction with the technical report to provide more insight into key findings. The four presentations are catered towards specific stakeholder groups that include: educators, wind industry firms, students, and current wind industry employees. This presentation is intended for use by educators and students looking to gain insight into key levers that can influence hiring difficulty and actionable steps that can be taken to help narrow the workforce gap. The report includes the current student perception of the wind industry, current hiring difficulties faced by wind energy firms, and current hiring difficulties faced by the potential workforce. The hiring difficulties for wind industry employers are divided by entry level employees and non-entry-level employees and by cross sections such as firm size, location, value chain segment, and wind industry sector. Hiring challenges faced by students trying to enter the wind industry are divided by 2-year degree and certification programs, 4-year degree programs, and current wind employees.

17 WIND ENERGY↗
DOE OSTI2022

A Comparison of Preconstruction and Operational Wake Loss Estimates for Land-Based Wind Plants

Recent studies suggest that biases between wind plant pre-construction energy yield estimates and actual energy production are decreasing over time. However, variability in energy yield prediction accuracy across different projects and wind energy consultants remains high. Wake effects are one of the largest categories comprising the pre-construction energy yield assessment process. To assess the accuracy of wake loss predictions, we compare pre-construction wake loss estimates provided by 8 consultants to the estimated operational wake losses for 10 North American wind plants, as part of the Wind Plant Performance Prediction (WP3) Benchmark project. We estimate operational wake losses using supervisory control and data acquisition (SCADA) data by comparing total wind plant energy production to the potential energy production based on the power produced by freestream wind turbines. In the presentation, we will discuss the overall wake loss prediction bias as well as the project-to-project variability in the prediction accuracy. Further, we will highlight challenges encountered when estimating operational wake losses, including the impact of complex terrain and the presence of neighboring wind plants.

benchmark↗
DOE OSTI2026

Grid and Wind Transient Ride Through Assessment of Type-5 Synchronous Wind Turbine

The integration of the inverter-based renewable energy resources is increasing and replacing conventional synchronous generators in the evolving bulk power system (BPS), impacting the system inertia along the way. Also, the limited over-current capability of power electronic converters continues to deteriorate the grid strength of the evolving power systems. Type-5 wind turbines have the potential to mitigate these problems because this configuration interfaces with the grid through a synchronous generator; hence, its operation and consequent grid impacts might mimic the conventional synchronous generator. The drivetrain of this type of turbines, however, is different from the more common Type-3 and Type-4 turbines. A hydraulic torque converter and gearbox with torque limiting feature are integral parts of a Type-5 wind turbine drivetrain, to isolate the wind speed variations at the wind turbine rotor from the grid connected generator side. This supports the synchronous operation of the generator. However, high fidelity models of Type-5 wind turbine drivetrain including these core components are not openly and widely available for grid integration and transient stability studies. Moreover, Type-5 turbines are not commonly deployed and hence its power generation and frequency stability characteristics are not widely publicized. This hinders appropriate assessment of Type-5 wind power plant's contribution to bulk grid resilience. This work provides transient stability assessment of a standalone Type-5 wind turbine. Normal operation and grid transient studies are performed to see the step load change and wind speed disturbance impacts on the Type-5 drivetrain and generation dispatch. Preliminary results show that Type-5 wind turbines can support load changes of between 0.6 p.u to 1.15 p.u. Beyond this point, the synchronization of the generator starts to deviate from its set point.

17 - WIND ENERGY↗
DOE OSTI2021

Lidar Buoy Data Dictionary: For the 2020 – 2021 California Deployments

Pacific Northwest National Laboratory (PNNL) manages two AXYS WindSentinel™ buoys (Buoys #120 and #130) on behalf of the U.S. Department of Energy (DOE) that collect a comprehensive set of meteorological and oceanographic (metocean) data to support resource characterization for wind energy offshore. The buoys have been deployed off the California coast in partnership with the Bureau of Ocean Energy Management (BOEM) from September 2020 through October 2021. One buoy was deployed within the Morro Bay Call Area offshore central California; the other buoy was deployed within the Humboldt Call Area off the coast of northern California. The measurements from the buoys are used to characterize the metocean conditions near potential locations for offshore wind lease areas and are uploaded to DOE’s Data Archive and Portal (DAP). Plots are updated on the DAP webpage to visualize the recent metocean measurements. This document serves as a data dictionary – or reference guide – for understanding and interpreting the data available from the buoys. This document includes: (1) specifications for the buoy instrumentation (Section 2.0) (2) description of each plot and definition of measured parameters (Section 3.0) (3) description of data files and naming convention (Appendix A) (4) reference guide of measurements and variables (Appendix B).

17 WIND ENERGY↗
DOE OSTI2022

Turbine scale and siting considerations in wind plant layout optimization and implications for capacity density

Improvements in wind energy technology, reduced costs, and ambitious clean energy goals have led to projections of high wind contribution in coming years. Developing methodologies to design wind plants with a variety of siting constraints and turbine sizes helps enable high wind penetration, and gain a better understanding of how wind plants are sensitive to setback constraints and turbine design. In this paper, we present a two-step optimization method to simultaneously determine the optimal number of turbines and their locations in a wind plant domain divided into many small, discrete parcels. We present the optimized performance metrics of a wind plant optimized with different turbine sizes and ratings, and with different siting restrictions within the wind plant. Our results indicate that taller and larger turbines are more sensitive to increasing siting constraints. We also compare the optimal wind plant layouts and performance for wind plants optimized for minimum COE and maximum profit. Wind plants optimized for profit had 130%-190% of the capacity of plants optimized for COE, which demonstrates that the optimal results are greatly affected by the objective function, which should be carefully considered. Finally, in this paper we demonstrate the effect of increasing siting constraints on wind plant capacity density, and how the results change when different land areas are used to calculate capacity density. When using the entire wind plant boundary area to determine capacity density, increasing siting constraints decreases the capacity density. However, when we only use the available area (the area left after removing the siting constraints) to calculate the capacity density, increasing the siting constraints increases capacity density. This is a critical insight because of how capacity density is typically defined and used in research, and has important implications for assessment of technical potential and capacity expansion modeling, as well as future wind deployment potential.

17 WIND ENERGY↗
DOE OSTI2020

Power and Natural Gas Systems Interface Study

Power systems worldwide are becoming more reliant on energy from natural gas, wind, and solar, posing potential reliability and coordination challenges from the tighter coupling of these infrastructure systems. This paper proposes a framework for the market-based coordination of electricity and natural gas system operations. The proposed framework includes a power system model that accounts for flexibility in the commitment of power plants with short start-up and shut-down times, coupled with a dynamic gas model that simulates when gas cannot be delivered to generators. The capabilities of the framework are illustrated using real-world electric power and gas systems, including scenarios around wind and solar penetrations and the analysis of time-variant, “shaped flow” gas nominations. Our results indicate that coordination between power and gas systems improves total gas delivery and reduces out-of-merit order dispatch in the electricity system, and that shaped flows may reduce unserved gas in systems with high penetrations of wind and solar.

coordinated operation↗
DOE OSTI2023

Setting the Baseline: The Current Understanding of Equity in Land-Based Wind Energy Development and Operation

As discussions about economic equity and environmental justice have become more prevalent in recent years, the related concepts of "energy justice" or "energy equity" have received increasing attention from policymakers, industry, nonprofits, and academics. According to the Initiative for Energy Justice (2019), energy justice is defined as "The goal of achieving equity in both the social and economic participation in the energy system, while also remediating social, economic, and health burdens on those disproportionately harmed by the energy system" The state of equity as it applies specifically to wind energy, however, remains relatively unexplored and isolated to academia. As a result, the National Renewable Energy Laboratory's Wind Energy Equity Engagement Series aims to better understand equity in wind energy through engagement with experts and communities, including representation in decision-making around new developments, potential impacts to communities near wind energy installations, and community-level distribution of the benefits and burdens of wind energy. This report covers the first three phases of the series.

17 WIND ENERGY↗
DOE OSTI2021

Environmentally-Friendly Fixatives with Embedded Intelligence for Dust Management at Contaminated Sites – 21266

Wind or rain can potentially spread loose hazardous contaminants from piles of rubble and soil waiting to be trucked to a landfill site for disposal. Water, which is plentiful near remediation sites, is the traditional dust suppressant during demolition, post-demolition sizing and encapsulation as well as soil trucking activities. However, water can mobilize the toxic metal contaminants in the soil into the ground water. Ground water is highly regulated and contaminant removal is costly. InnoSense LLC (ISL) is developing DustSafe™ as a cost-effective alternative to water for various decontamination & decommissioning (D&D) applications. It is a sprayable dust abatement solution designed to actively trap, remediate, and aid in visualizing hazardous materials while preventing their dispersion by wind, water or impact. Aside from application as a dust suppressant to trap airborne toxic and radiological hazards during demolition activities, with customization DustSafe can be used to locate/characterize and remediate hazards prior to D&D activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessment of Offshore Wind Energy Opportunities and Challenges in the U.S. Gulf of Mexico

This report identifies and discusses opportunities and challenges for offshore wind energy development in the Gulf of Mexico (GOM). The results indicate that offshore wind energy has the potential to be a viable clean energy option to help the region meet the U.S. goals to achieve carbon neutrality by 2050. Many technical challenges are discussed but most can be resolved with engineering solutions that are available to the industry.

17 WIND ENERGY↗
DOE OSTI2024

Unseen Winds: Harnessing High-Altitude Winds in the Southeast USA

This project aims to identify potential sites in the United States for further testing and development of airborne wind energy systems (AWES). Through industry questionnaires and interviews with AWES companies, the study assesses existing test sites' capabilities and gaps, leading to a three-tiered test site strategy: short-duration prototype demonstrations, long-duration technical assessments and power validations, and airspace interaction and deconfliction studies. Notably, the southeastern United States presents significant potential for AWES due to its lack of traditional wind turbines, which is attributed to low wind speeds at lower altitudes. However, wind conditions improve significantly at higher altitudes, making this region a promising candidate for AWES deployment. The project considers factors such as wind resources, infrastructure proximity, social acceptance, and environmental impacts to recommend sites that can support the unique needs of AWES manufacturers and facilitate their commercialization. Early findings suggest rural communities with low grid resiliency could benefit economically and technologically from hosting AWES test sites, especially with operator training centers and potential for long-term skilled employment in future disaster relief and other applications.

17 WIND ENERGY↗
DOE OSTI2020

Modelling and assessing the near-wake representation and turbulence behaviour of control-oriented wake models

Due to the interaction between the wake of an upstream turbine on a downstream turbine, power losses and increased fatigue loads occur. By yawing the upstream turbine with regard to the wind direction, one can potentially reduce the power losses of the downstream turbine and reduce the fatigue loads. The evolution of the wake depends on the pressure gradient within the near-wake region and the turbulent kinetic energy and must be incorporated in existing wake steering algorithms to provide an accurate estimation of the wake flow. This paper will show a first approach to implement a near-wake model and a turbulence model in the curled wake model within the controls-oriented framework FLORIS. The near-wake model is based on an analytical expression of the velocity profile to model the pressure gradient. Furthermore, two turbulence models are incorporated within the curled wake model based on a Gaussian-distribution and a mixing length formulation. The adapted curled wake model is then assessed with the measurement data acquired in the wind tunnel at ForWind – University of Oldenburg. The evaluation of the models show good agreement for the velocity deficit and representation of the near-wake region. Furthermore, the turbulent kinetic energy behaved as expected in comparison to other work, showing a ring of high turbulent kinetic energy at non-yawed condition which is deflected to a curled shape at large yaw angles with the turbulence model based on a mixing length formulation.

FLORIS↗