Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “undulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Trade-offs arising from mixture of color cueing and monocular, binoptic, and stereoscopic cueing information for simulated rotorcraft flight

To provide stereopsis, binocular helmet-mounted display (HMD) systems must trade some of the total field of view available from their two monocular fields to obtain a partial overlap region. The visual field then provides a mixture of cues, with monocular regions on both peripheries and a binoptic (the same image in both eyes) region or, if lateral disparity is introduced to produce two images, a stereoscopic region in the overlapped center. This paper reports on in-simulator assessment of the trade-offs arising from the mixture of color cueing and monocular, binoptic, and stereoscopic cueing information in peripheral monitoring displays as utilized in HMD systems. The accompanying effect of stereoscopic cueing in the tracking information in the central region of the display is also assessed. The pilot's task for the study was to fly at a prescribed height above an undulating pathway in the sky while monitoring a dynamic bar chart displayed in the periphery of their field of view. Control of the simulated rotorcraft was limited to the longitudinal and vertical degrees of freedom to ensure the lateral separation of the viewing conditions of the concurrent tasks.

Parrish, Russell V.↗
NASA NTRS1993

A study of the UV and VUV degradation of FEP

UV and VUV degradation of fluorinated ethylene propylene (FEP) copolymer was studied using electron spin resonance (ESR) spectroscopy, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The ESR study revealed the formation of a terminal polymer radical. The stability of this radical was investigated under different environments. An XPS study of FEP film exposed to VUV and atomic oxygen showed that oxidation takes place on the polymer surface. The study revealed also that the percentage of CF2 in the polymer surface decreased with exposure time and the percentage of CF, CF3, and carbon attached to oxygen increased. SEM micrographs of FEP film exposed to VUV and atomic oxygen identified a rough surface with undulations similar to sand dunes.

George, Graeme A.↗
NASA NTRS1992

The determination of a one year mean sea surface height track from Geosat altimeter data and ocean variability implications

Results are presented for determinations of mean sea surface along a reference Geosat altimeter tracking, using Geosat data from the first year of the exact repeat mission (ERM) and improved orbits. The results were used to study the time variability of the ocean surface, and a map was constructed of the major current structure. The data included 21 complete and one incomplete ERMs, with the sea surface heights being referenced to the single reference track through the application of geoid gradient corrections. This Geosat surface can be used as a reference surface to which other altimeter data could be incorporated; the data could then be used for the recovery of geoid undulations and gravity anomalies in the ocean areas.

Wang, Yan M.↗
NASA NTRS1993

Increased depth-diameter ratios in the Medusae Fossae Formation deposits of Mars

Depth to diameter ratios for fresh impact craters on Mars are commonly cited as approximately 0.2 for simple craters and 0.1 for complex craters. Recent computation of depth-diameter ratios in the Amazonis-Memnonia region of Mars indicates that craters within the Medusae Fossae Formation deposits found in this region display greater depth-diameter ratios than expected for both simple and complex craters. Photoclinometric and shadow length techniques have been used to obtain depths of craters within the Amazonis-Memnonia region. The 37 craters in the 2 to 29 km diameter range and displaying fresh impact morphologies were identified in the area of study. This region includes the Amazonian aged upper and middle members of the Medusae Fossae Formation and Noachian aged cratered and hilly units. The Medusae Fossae Formation is characterized by extensive, flat to gently undulating deposits of controversial origin. These deposits appear to vary from friable to indurated. Early analysis of crater degradation in the Medusae Fossae region suggested that simple craters excavated to greater depths than expected based on the general depth-diameter relationships derived for Mars. However, too few craters were available in the initial analysis to estimate the actual depth-diameter ratios within this region. Although the analysis is continuing, we are now beginning to see a convergence towards specific values for the depth-diameter ratio depending on geologic unit.

Barlow, N. G.↗
NASA NTRS1993

Resolving topographic detail on Venus by modeling complex Magellan altimetry echoes

Magellan's altimeter is providing some of the finest resolution topography of Venus achieved to date. Nevertheless, efforts continue to improve the topographic resolution whenever possible. One effort to this end is stereoscopic imaging, which provides topography at scales similar to that of the synthetic aperture radar (SAR). However, this technique requires two SAR images of the same site to be obtained and limits the utility of this method. In this paper, we present another method to resolve topographic features at scales smaller than that of an altimeter footprint, which is more globally applicable than the stereoscopic approach. Each pulse which is transmitted by Magellan's altimeter scatters from the planet and echoes to the receiver, delayed based on the distance between the spacecraft and each surface element. As resolved in time, each element of an altimetry echo represents the sum of all points on the surface which are equidistant from the spacecraft. Thus, individual returns, as a function of time, create an echo profile which may be used to derive properties of the surface, such as the scattering law or, in this case, the topography within the footprint. The Magellan project has derived some of this information by fitting model templates to radar echo profiles. The templates are calculated based on Hagfor's Law, which assumes a smooth, gently undulating surface. In most regions these templates provide a reasonable fit to the observed echo profile; however, in some cases the surface departs from these simple assumptions and more complex profiles are observed. Specifically, we note that sub-footprint topographic relief apparently has a strong effect on the shape of the echo profile. To demonstrate the effects of sub-resolution relief on echo profiles, we have calculated the echo shapes from a wide range of simple topographic models. At this point, our topographic models have emphasized surfaces where only two dominant elevations are contained within a footprint, such as graben, ridges, crater rims, and central features in impact craters.

Lovell, Amy J.↗
NASA NTRS1994

Analysis of woven and braided fabric reinforced composites

A general purpose micromechanics analysis that discretely models the yarn architecture within the textile repeating unit cell, was developed to predict overall, three dimensional, thermal and mechanical properties. This analytical technique was implemented in a user-friendly, personal computer-based, windows compatible code called Textile Composite Analysis for Design (TEXCAD). TEXCAD was used to analyze plain, 5-harness satin, and 8-harness satin weave composites along with 2-D braided and 2x2, 2-D triaxial braided composites. The calculated overall stiffnesses correlated well with available 3-D finite element results and test data for both the woven and the braided composites. Parametric studies were performed to investigate the effects of yarn size on the yarn crimp and the overall thermal and mechanical constants for plain weave composites. The effects of braid angle were investigated for the 2-D braided composites. Finally, the effects of fiber volume fraction on the yarn undulations and the thermal and mechanical properties of 2x2, 2-D triaxial braided composites were also investigated.

Naik, Rajiv A.↗
NASA NTRS1994

Preliminary description of double drive tube 68002/68001

Apollo 16 double drive tube 68002/68001 has been opened, and information on its contents and structure is now available. The sample was taken in Apr. 1972 at Station 8, a gently undulating surface of South Ray Crater ejecta material. The tube was driven into the surface about 2 m from the edge of a 10-15 m diameter crater in an area where small (less than 0.5 m diameter) craters are common. Fragments of the less than 1 cm diameter size are most abundant in this area. The top section, 68002, and the lower section, 68001, have a combined length of about 61 cm.

Schwarz, Carol↗
NASA NTRS1994

Observations in the sheath region ahead of a magnetic cloud and in the dayside magnetosheath during magnetic cloud passage

We present magnetic field and particle (protons and electrons) observations in the sheath region behind an interplanetary shock driven by a magnetic cloud, and in the magnetic cloud itself. We also discuss observations in the dayside terrestrial magnetosheath during cloud passage. We find that the region ahead of the cloud is in pressure balance. Further, throughout its extent (greater than 0.06 AU), the magnetic field strength is anticorrelated with the plasma density, with the latter decreasing steadily as the cloud is approached. This behavior is indicative of magnetic forces influencing the flow topology and highlights a large-scale breakdown of predictions based solely on gas dynamical considerations. We also study density structures inside the cloud which result in an undulating dynamic pressure being applied to the magnetopause causing it to oscillate with amplitudes of approximately 1-3 Re and period approximately 2h.

Farrugia, C. J.↗
NASA NTRS1993

Specular scattering on a terrestrial playa and implications for planetary surface studies

Multiangle Advanced Solid State Array Spectroradiometer (ASAS) and Portable Apparatus for Rapid Acquisition of Bidirectional Observations of Land and Atmosphere (PARABOLA) visible and near infrared reflectance data covering the Lunar Lake playa, Nevada, were modeled using specular and volume scattering theory. The volume component used to model the data was based on the Hapke (1986) model and the specular scattering component was based on Fresnel reflection from surface facets with a distribution of tilts. Specular scattering was needed to explain the several-fold increase in reflectance observed at high phase angles in the solar principal plane. Results imply single scattering albedos of approximately 0.93 to 0.95, a real index of refraction value of approximately 1.52 (at a wavelength of 0.66 micron), a small imaginary index of refraction and an exponential facet tilt probability function for the playa. Electron micrographs showed th playa surface to consist of ensembles of smooth, micrometer-scale ellipsoidal particles on gently undulating topography at the millimeter to centimeter scale. The exponential probability function is consistent with this observation. Mars and the icy satellites are discussed as possible places to look for a significant specular scattering component.

Shepard, Michael K.↗
NASA NTRS1994

Plains tectonism on Venus: Inferences from canali longitudinal profiles

Canali-type channels on Venus show inverted profile segments; that is, large portions of the channels trend uphill. The original gradients for these channels were not horizontal, but must have progressively trended downhill. Therefore, undulation patterns imposed on the profiles have to be the result of tectonism occurring since channel formation. This implies that some of the uppermost geological units of the plains, which are coincident with canali, experienced significant postemplacement tectonic deformation. The pattern of deformation is hierarchical. Within observational limits, at least two scales of deformation are indicated. The longer scale deformation (thousands of kilometers) corresponds to large-scale basins; the shorter scale deformation (hundreds of kilometers) corresponds to ridge belts or to small-scale domes/basins. The latter features, at scales up to a few hundred kilometers, extensively deform some plain areas. Although not appearing in the topographic profiles because of resolution limitations, deformation scales of tens of kilometers or less, which mostly reflect wrinkle ridges, also overlap the longer deformation scales. The channels probably formed relatively quickly in comparison to the time scale of deformation. Canali formation is closely related to the genesis of plains, and canali profile deformation reflects tectonic processes operating at multiple scales. The lower limit rates of large-scale tectonic warping are comparable to epeirogenetic deformation rates for Earth's intraplate continental interiors.

Komatsu, Goro↗
NASA NTRS1995

Accuracy of satellite altimeter elevations over the Greenland ice sheet

The accuracy of Geosat satellite altimetry over the Greenland ice sheet is evaluated by comparing the measured heights to radar elevations from the airborne Greenland Aerogeophysics Project. At the center of the ice sheet where the ice surface is nearly level, surface comparisons show a fit at the 1 to 3 m level as expected, but even at moderately sloping ice regions (0.3 deg-0.6 deg), satellite altimetry mean errors in the range of 10 to 35 m are observed. These errors are found for slope-corrected and waveform-retracked data, so most previous accuracy estimates of current satellite altimetry ice sheet elevations in regions of slopping or undulating ice appear to be too optimistic.

Ekholm, Simon↗
NASA NTRS1995

Ice flow dynamics of the Greenland ice sheet from SAR interferometry

Synthetic-aperture radar (SAR) interferograms produced from ESA's ERS-1 satellite, provide the first synoptic view of ice flow dynamics of the western sector of the Greenland Ice Sheet. Glacial motion is detected in the radar ranging direction at millimetric scales, across a complete sequence of snow accumulation and melting regimes, despite significant varations in their radar scattering properties. Ice flow evolves from a slow, regular motion at the higher elevations. At lower elevations, motion is strongly convoluted by meter-scale undulations in surface topography, which have a unique interferometric signature that enables a novel approach for retrieving flow direction. Inferred flow directions, combined with surface displacements in the radar ranging direction, yield ice velocity estimates that are within 6% of in-situ measurements gathered along a 40 km survey line. Application of repeat-pass SAR interferometry to the entire Greenland Ice Sheet should enable precise mapping of its ice flow dynamics at an unprecedented level of spatial detail.

Rignot, E.↗
NASA NTRS1995

Modeling and characterization of through-the-thickness properties of 3D woven composites

The through-the-thickness properties of three-dimensionally (3D) woven carbon/epoxy composites have been studied. The investigation aimed at the evaluation and development of test methodologies for the property characterization in the thickness direction, and the establishment of fiber architectures were studied: layer-to-layer Angle Interlock, through-the-thickness Orthogonal woven preform with surface pile was also designed and manufactured for the fabrication of tensile test coupons with integrated grips. All the preforms were infiltrated by the resin transfer molding technique. The microstructures of the composites were characterized along the warp and fill (weft) directions to determine the degree of yarn undulations, yarn cross-sectional shapes, and microstructural dimensions. These parameters were correlated to the fiber architecture. Specimens were designed and tested for the direct measurement of the through-the-thickness tensile, compressive and shear properties of the composites. Design optimization was conducted through the analysis of the stress fields within the specimen coupled with experimental verification. The experimentally-derived elastic properties in the thickness direction compared well with analytical predictions obtained from a volume averaging model.

Hartranft, Dru↗
NASA NTRS1996

Electric Field Induced Interfacial Instabilities

The study of the interface in a charge-free, nonpolar, critical and near-critical binary fluid in the presence of an externally applied electric field is presented. At sufficiently large fields, the interface between the two phases of the binary fluid should become unstable and exhibit an undulation with a predefined wavelength on the order of the capillary length. As the critical point is approached, this wavelength is reduced, potentially approaching length-scales such as the correlation length or critical nucleation radius. At this point the critical properties of the system may be affected. In zero gravity, the interface is unstable at all long wavelengths in the presence of a field applied across it. It is conjectured that this will cause the binary fluid to break up into domains small enough to be outside the instability condition. The resulting pattern formation, and the effects on the critical properties as the domains approach the correlation length are of acute interest. With direct observation, laser light scattering, and interferometry, the phenomena can be probed to gain further understanding of interfacial instabilities and the pattern formation which results, and dimensional crossover in critical systems as the critical fluctuations in a particular direction are suppressed by external forces.

Kusner, Robert E.↗
NASA NTRS1997

An Investigation of SiC/SiC Woven Composite Under Monotonic and Cyclic Loading

The desirable properties in ceramic matrix composites (CMCs), such as high temperature strength, corrosion resistance, high toughness, low density, or good creep resistance have led to increased use of CMCs in high-speed engine structural components and structures that operate in extreme temperature and hostile aero-thermo-chemical environments. Ceramic matrix composites have been chosen for turbine material in the design of 21 st-century civil propulsion systems to achieve high fuel economy, improved reliability, extended life, and reduced cost. Most commercial CMCs are manufactured using a chemical vapor infiltration (CVI) process. However, a lower cost fabrication known as melt-infiltration process is also providing CMCs marked for use in hot sections of high-speed civil transports. The scope of this paper is to report on the material and mechanical characterization of the CMCs subjected to this process and to predict the behavior through an analytical model. An investigation of the SiC/SiC 8-harness woven composite is ongoing and its tensile strength and fatigue behavior is being characterized for room and elevated temperatures. The investigation is being conducted at below and above the matrix cracking stress once these parameters are identified. Fractography and light microscopy results are being studied to characterize the failure modes resulting from pure uniaxial loading. A numerical model is also being developed to predict the laminate properties by using the constituent material properties and tow undulation.

Lang, J.↗
NASA NTRS1998

The Development of the Joint NASA GSFC and the National Imagery and Mapping Agency (NIMA) Geopotential Model EGM96

The NASA Goddard Space Flight Center (GSFC), the National Imagery and Mapping Agency (NIMA), and The Ohio State University (OSU) have collaborated to develop an improved spherical harmonic model of the Earth's gravitational potential to degree 360. The new model, Earth Gravitational Model 1996 (EGM96), incorporates improved surface gravity data, altimeter-derived gravity anomalies from ERS-1 and from the GEOSAT Geodetic Mission (GM), extensive satellite tracking data-including new data from Satellite Laser Ranging (SLR), the Global Postioning System (GPS), NASA's Tracking and Data Relay Satellite System (TDRSS), the French DORIS system, and the US Navy TRANET Doppler tracking system-as well as direct altimeter ranges from TOPEX/POSEIDON (T/P), ERS-1, and GEOSAT. The final solution blends a low-degree combination model to degree 70, a block-diagonal solution from degree 71 to 359, and a quadrature solution at degree 360. The model was used to compute geoid undulations accurate to better than one meter (with the exception of areas void of dense and accurate surface gravity data) and realize WGS84 as a true three-dimensional reference system. Additional results from the EGM96 solution include models of the dynamic ocean topography to degree 20 from T/P and ERS-1 together, and GEOSAT separately, and improved orbit determination for Earth-orbiting satellites.

Lemoine, F. G.↗
NASA NTRS1998

Atmospheric Torques on the Solid Earth and Oceans Based on the GEOS-1 General Circulation Model

The GEOS-1 general circulation model has been used to compute atmospheric torques on the oceans and solid Earth for the period 1980-1995. The time series for the various torque components have been analyzed by means of Fourier transform techniques. It was determined that the wind stress torque over land is more powerful than the wind stress torque over water by 55%, 42%, and 80% for the x, y, and z components respectively. This is mainly the result of power in the high frequency range. The pressure torques due to polar flattening, equatorial ellipticity, marine geoid, and continental orography were computed. The orographic or "mountain torque" components are more powerful than their wind stress counterparts (land plus ocean) by 231% (x), 191% (y), and 77% (z). The marine pressure torques due to geoidal undulations are much smaller than the orographic ones, as expected. They are only 3% (x), 4% (y), and 5% (z) of the corresponding mountain torques. The geoidal pressure torques are approximately equal in magnitude to those produced by the equatorial ellipticity of the Earth. The pressure torque due to polar flattening makes the largest contributions to the atmospheric torque budget. It has no zonal component, only equatorial ones. Most of the power of the latter, between 68% and 69%, is found in modes with periods under 15 days. The single most powerful mode has a period of 361 days. The gravitational torque ranks second in power only to the polar flattening pressure torque. Unlike the former, it does produce a zonal component, albeit much smaller (1%) than the equatorial ones. The gravitational and pressure torques have opposite signs, therefore, the gravitational torque nullifies 42% of the total pressure torque. Zonally, however, the gravitational torque amounts to only 6% of the total pressure torque. The power budget for the total atmospheric torque yields 7595 and 7120 Hadleys for the equatorial components and 966 Hadleys for the zonal. The x-component exhibits a large mean value (1811 H), mainly the result of polar flattening pressure torque acting on the ocean surfaces. Atmospheric torque modes with periods of 408, 440, and 476 days appear in the spectrum of the equatorial components.

Sanchez, Braulio V.↗
NASA NTRS1999

Artifacts Introduced in the Point Evaluation of Functions Expanded into a Degree 360 Spherical Harmonic Series

An expansion of a function initially given in 1deg cells was carried out to degree 360 by using 30'cells whose value was initially assigned to be the value of the 1deg cell in which it fell. The evaluation of point values of the function from the degree 360 expansion revealed spurious patterns attributed to the coefficients from degree 181 to 360. Expansion of the original function in 1deg cells to degree 180 showed no problems in the point evaluation. Mean 1deg values computed from both degree 180 to 360 expansions showed close agreement with the original function. The artifacts could be removed if the 30' values were interpolated by spline procedures from adjacent I' cells. These results led to an examination of the gravity anomalies and geoid undulations from EGM96 in areas where I' values were "split up" to form 30'cells. The area considered was 75degS to 85degS, 100degE to 120degE where the split up cells were basically south of 81 degS. A small, latitude related, and possibly spurious effect might be detectable in anomaly variations in the region. These results suggest that point values of a function computed from a high degree expansion may have spurious signals unless the cell size is compatible with the maximum degree of expansion. The spurious signals could be eliminated by using a spline interpolation procedure to obtain the 30'values from the 1deg values.

Rapp, R.↗