Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time resolved spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Remote Raman Spectroscopy of Minerals at Elevated Temperature Relevant to Venus Exploration

We have used a remote time-resolved telescopic Raman system equipped with 532 nm pulsed laser excitation and a gated intensified CCD (ICCD) detector for measuring Raman spectra of a number of minerals at high temperature to 970 K. Remote Raman measurements were made with samples at 9-meter in side a high-temperature furnace by gating the ICCD detector with 2 micro-sec gate to minimize interference from blackbody emission from mineral surfaces at high temperature as well as interference from ambient light. A comparison of Raman spectra of gypsum (CaSO4.2H2O), dolomite (CaMg(CO3)2), and olivine (Mg2Fe2-xSiO4), as a function of temperature shows that the Raman lines remains sharp and well defined even in the high-temperature spectra. In the case of gypsum, Raman spectral fingerprints of CaSO4.H2O at 518 K were observed due to dehydration of gypsum. In the case of dolomite, partial mineral dissociation was observed at 973 K at ambient pressure indicating that some of the dolomite might survive on Venus surface that is at approximately 750 K and 92 atmospheric pressure. Time-resolved Raman spectra of low clino-enstatite (MgSiO3) measured at 75 mm from the sample in side the high-temperature furnace also show that the Raman lines remains sharp and well defined in the high temperature spectra. These high-temperature remote Raman spectra of minerals show that time-resolved Raman spectroscopy can be used as a potential tool for exploring Venus surface mineralogy at shorter (75 mm) and long (9 m) distances from the samples both during daytime and nighttime. The remote Raman system could also be used for measuring profiles of molecular species in the dense Venus atmosphere during descent as well as on the surface.

Sharma, Shiv K.↗
DOE OSTI2026

Comparison of time-resolved photoluminescence and deep-level transient spectroscopy defect evaluations in an InAs nBn detector subjected to in situ and ex situ 63 MeV proton irradiation

Deep-level transient spectroscopy and temperature-dependent time-resolved photoluminescence experiments are performed on identical InAs nBn photodetector structures as a function of in situ and ex situ 63 MeV proton irradiation to assess their generation and recombination dynamics. Pre-irradiation, the n-type InAs absorbing region, exhibits a steadily increasing minority carrier lifetime with increasing temperature, providing evidence that excited minority carriers may be recombining via shallow defect levels. From deep-level transient spectroscopy, two features are found between 10 and 275 K: a low temperature broad “shoulder,” which suggests emission from multiple shallow electron defect levels with energies <29 meV and a high temperature minimum occurring at ∼230 K with an activation energy of 539 meV, which suggests a defect in the barrier layer in the device. Two similar nBn detectors are then subjected to 63 MeV proton irradiation in step doses and measured between steps. One experiment is performed in situ with an nBn held at ∼10 K during dosing, and the other experiment is performed ex situ with a similar nBn held at room temperature for dosing. The ex situ dosing results in an evaluation of the defect introduction rate that is three to four times lower than in situ due to partial annealing of the proton-induced displacement damage at room temperature. The results of these two experiments are then compared with the dose-dependent recombination rate analysis, resulting in an estimated recombination defect cross section of 1.6 × 10 −13 cm 2 for the shallow shoulder defect.

Carrasco, Rigo A. [Air Force Research Laboratory (↗
DOE OSTI2022

Colloidal Nanoribbons: From Infrared to Visible

Using the cation-exchange method, colloidal PbS nanoribbons are converted completely into CdS nanoribbons. This process expands the emission spectrum of the nanoribbons from infrared to visible. Here, the morphology of nanoribbons remains the same after cation exchange, but the crystal structure changes from rock salt to zincblende. CdS nanoribbons exhibit blue band-edge photoluminescence under ultraviolet-light excitation. Cathodoluminescence spectroscopy of the CdS nanoribbons shows multicolor (blue, green, and red) emissions. Further time-resolved photoluminescence spectroscopy studies show that the lifetime of the midgap states is more than 2 orders of magnitude longer than that of the band-edge states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Preliminary Studies of UV Photolysis of Gas-phase CH3I in Air: Time-resolved Infrared Identification of Methanol and Formaldehyde Products

Halogen-bearing compounds are known to photolyze under UV radiation; analysis of degradation products is of interest for both safety and environmental considerations. Time-resolved infrared spectroscopy was used in the laboratory to study the UV-photolysis of methyl iodide. Photolysis products methanol (CH3OH) and formaldehyde (HCHO) were clearly identified in a time-resolved manner. Preliminary kinetic models predict the formation of both CH3OH and HCHO.

Hughey, Kendall D.↗
DOE OSTI2024

Spatiotemporal dispersion compensation for a 200-THz noncollinear optical parametric amplifier

A noncollinear optical parametric amplifier (NOPA) can produce few-cycle femtosecond laser pulses that are ideally suited for time-resolved optical spectroscopy measurements. However, the nonlinear-optical process giving rise to ultrabroadband pulses is susceptible to spatiotemporal dispersion problems. Here, we detail refinements, including chirped-pulse amplification (CPA) and pulse-front matching (PFM), that minimize spatiotemporal dispersion and thereby improve the properties of ultrabroadband pulses produced by a NOPA. Here, the description includes a rationale behind the choices of optical and optomechanical components, as well as assessment protocols. We demonstrate these techniques using a 1 kHz, second-harmonic Ti:sapphire pump configuration, which produces ~5-fs duration pulses that span from about 500 to 800 nm with a bandwidth of about 200 THz. To demonstrate the utility of the CPA-PFM-NOPA, we measure vibrational quantum beats in the transient–absorption spectrum of methylene blue, a dye molecule that serves as a reference standard.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Time-Resolved X-ray Emission Spectroscopy and Synthetic High-Spin Model Complexes Resolve Ambiguities in Excited-State Assignments of Transition-Metal Chromophores: A Case Study of Fe-Amido Complexes

To fully harness the potential of abundant metal coordination complex photosensitizers, a detailed understanding of the molecular properties that dictate and control the electronic excited-state population dynamics initiated by light absorption is critical. In the absence of detectable luminescence, optical transient absorption (TA) spectroscopy is the most widely employed method for interpreting electron redistribution in such excited states, particularly for those with a charge-transfer character. The assignment of excited-state TA spectral features often relies on spectroelectrochemical measurements, where the transient absorption spectrum generated by a metal-to-ligand charge-transfer (MLCT) electronic excited state, for instance, can be approximated using steady-state spectra generated by electrochemical ligand reduction and metal oxidation and accounting for the loss of absorptions by the electronic ground state. However, the reliability of this approach can be clouded when multiple electronic configurations have similar optical signatures. Using a case study of Fe(II) complexes supported by benzannulated diarylamido ligands, we highlight an example of such an ambiguity and show how time-resolved X-ray emission spectroscopy (XES) measurements can reliably assign excited states from the perspective of the metal, particularly in conjunction with accurate synthetic models of ligand-field electronic excited states, leading to a reinterpretation of the long-lived excited state as a ligand-field metal-centered quintet state. Furthermore, a detailed analysis of the XES data on the long-lived excited state is presented, along with a discussion of the ultrafast dynamics following the photoexcitation of low-spin Fe(II)-N amido complexes using a high-spin ground-state analogue as a spectral model for the 5 T 2 excited state.

14 SOLAR ENERGY↗
DOE OSTI2022

Coupling Pulse Radiolysis with Nanosecond Time-Resolved Step-Scan Fourier Transform Infrared Spectroscopy: Broadband Mid-Infrared Detection of Radiolytically Generated Transients

We describe the first implementation of broadband, nanosecond time-resolved step-scan Fourier transform infrared (S 2 -FT-IR) spectroscopy at a pulse radiolysis facility. This new technique allows the rapid acquisition of nano- to microsecond time-resolved infrared (TRIR) spectra of transient species generated by pulse radiolysis of liquid samples at a pulsed electron accelerator. Wide regions of the mid-infrared can be probed in a single experiment, which often takes < 20–30 min to complete. It is therefore a powerful method for rapidly locating the IR absorptions of short-lived, radiation-induced species in solution, and for directly monitoring their subsequent reactions. Time-resolved step-scan FT-IR detection for pulse radiolysis thus complements our existing narrowband quantum cascade laser-based pulse radiolysis-TRIR detection system, which is more suitable for acquiring single-shot kinetics and narrowband TRIR spectra on small-volume samples and in strongly absorbing solvents, such as water. We have demonstrated the application of time-resolved step-scan FT-IR spectroscopy to pulse radiolysis by probing the metal carbonyl and organic carbonyl vibrations of the one-electron-reduced forms of two Re-based CO 2 reduction catalysts in acetonitrile solution. Transient IR absorption bands with amplitudes on the order of 1 × 10 −3 are easily detected on the sub-microsecond timescale using electron pulses as short as 250 ns.

(S2-FT-IR)↗
DOE OSTI2021

Attosecond intra-valence band dynamics and resonant-photoemission delays in W(110)

Time-resolved photoelectron spectroscopy with attosecond precision provides new insights into the photoelectric effect and gives information about the timing of photoemission from different electronic states within the electronic band structure of solids. Electron transport, scattering phenomena and electron-electron correlation effects can be observed on attosecond time scales by timing photoemission from valence band states against that from core states. However, accessing intraband effects was so far particularly challenging due to the simultaneous requirements on energy, momentum and time resolution. Here we report on an experiment utilizing intracavity generated attosecond pulse trains to meet these demands at high flux and high photon energies to measure intraband delays between sp- and d- band states in the valence band photoemission from tungsten and investigate final-state effects in resonant photoemission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Near-field imaging of plasmonic nanopatch antennas with integrated semiconductor quantum dots

Plasmonic nanopatch antennas that incorporate dielectric gaps hundreds of picometers to several nanometers thick have drawn increasing attention over the past decade because they confine electromagnetic fields to grossly sub-diffraction-limited volumes. Substantial control over the optical properties of excitons and color centers confined within these plasmonic cavities has already been demonstrated with far-field optical spectroscopies, but near-field optical spectroscopies are essential for an improved understanding of the plasmon–emitter interaction at the nanoscale. Here, we characterize the intensity and phase-resolved plasmonic response of isolated nanopatch antennas by cathodoluminescence microscopy. Furthermore, we explore the distinction between optical and electron beam spectroscopies of coupled plasmon–exciton heterostructures to identify constraints and opportunities for future nanoscale characterization and control of hybrid nanophotonic structures. While we observe substantial Purcell enhancement in time-resolved photoluminescence spectroscopies, negligible Purcell enhancement is observed in cathodoluminescence spectroscopies of hybrid nanophotonic structures. The substantial differences in measured Purcell enhancement for electron beam and laser excitation can be understood as a result of the different selection rules for these complementary experiments. Overall, these results provide a fundamentally new understanding of near-field plasmon–exciton interactions in nanopatch antennas, which is essential for myriad emerging quantum photonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning the charge transfer character of the multiexciton state in singlet fission

Intramolecular singlet fission (SF) produces the multiexciton correlated triplet pair state, (T 1 T 1 ), prior to the formation of free triplet excitons. The nature of the multiexciton state is complex, as generation of the (T 1 T 1 ) state may involve a charge transfer (CT) intermediate and has been shown to have both mixed electronic and spin characters. According to transient absorption spectroscopy, a linear terrylene-3,4:11,12-bis(dicarboximide) dimer (TDI 2 ) exhibits solvent-dependent excited-state dynamics. As solvent polarity increases from 1,2,4-trichlorobenzene (ε = 2.2) to chlorobenzene (ε = 5.6) to 1,2-dichlorobenzene (ε = 9.9), the SF rate in TDI2 increases and the multiexciton state, which can be thought of as a linear combination of the 1 (S 1 S 0 ), CT, and (T 1 T 1 ) states, gains more CT character. Eventually, the CT state becomes a trap state as indicated by symmetry-breaking charge separation in TDI2 in pyridine (ε = 12.3). The dielectric environment influences not only the SF rate and the relative contributions of the 1 (S 1 S 0 ), CT, and (T 1 T 1 ) states to the overall multiexciton state but also the rate at which the state mixing evolves, with faster dynamics in higher polarity solvents. More importantly, the tunability and presence of strong CT character in the multiexciton state have implications for SF applications since they often rely on electron transfer from the free triplet excitons. This enhanced CT character in the (T 1 T 1 ) state may assist with two-electron transfer directly from the (T 1 T 1 ) state, allowing for facile extraction of charges in intramolecular SF systems whose (T 1 T 1 ) states do not always efficiently dissociate to two triplet excitons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Corundum Discovered by SuperCam and the Perseverance Rover at Jezero Crater, Mars

Minerals provide clues to the type of geologic environments in which they form. The primary types of minerals that have been identified on Mars indicate a history dominated by volcanism followed by interaction with water. However, other minerals are sometimes found. Here we present results from the SuperCam instrument on the Perseverance rover in which the mineral corundum (α-Al2O3) has been identified using a technique called time-resolved luminescence spectroscopy. Corundum has a unique light-emitting (luminescence) feature based on two well-known peaks as well as the time it takes for this light to fade after being excited by a laser, which is referred to as the lifetime. Corundum forms in specific environments that are enriched in aluminum and depleted in silicon and have been subjected to high temperature and pressure. Such places include deep subsurface magmas or shallower locations that have been exposed to high temperature through tectonic processes or meteorite impacts. Given their small size, association with a mineral called plagioclase, and location on the heavily impacted crater rim, we propose that these corundum minerals formed through impact processes.

58 GEOSCIENCES↗
DOE OSTI2021

Suppressing Auger Recombination in Multiply Excited Colloidal Silicon Nanocrystals with Ligand-Induced Hole Traps

Nonradiative Auger recombination in multiply excited nanocrystals is a dominant efficiency loss pathway for nanocrystal-containing optoelectronic devices that rely on high-rate emission and absorption operating conditions. Overcoming Auger recombination in these quantum-confined systems is therefore a longstanding challenge to the synthetic nanocrystal as well as device manufacturing communities. Several successful strategies have been realized to reduce Auger recombination, but they rely on complex and time-consuming nanocrystal core/shell synthesis. Alternatively, controlling Auger rates by varying the nanocrystal–ligand-binding chemistry is a promising route to obtain functional tunability, which reduces the barrier to large-scale manufacturing. The covalent surface chemistry and the extremely long-lived photoexcited lifetimes of silicon nanocrystals (Si NCs) make them a unique system among colloidal semiconductor NCs to study the intersection between surface chemistry and photoexcited carrier dynamics. Here, we show that changing the functional group that binds a saturated dodecyl ligand to the surface of nonthermal plasma-synthesized Si NCs from alkyl to thiolate slows Auger recombination rates within multiply excited Si NCs. This reduction in Auger rate persists across Si NC sizes ranging from 3.5 to 8 nm in diameter, but the expected linear dependence of Auger rates on the NC volume is retained for both alkyl and alkylthiolate surface terminations. To understand the origin behind this elongation, we carry out steady-state and time-resolved photoluminescence measurements as well as time-resolved terahertz spectroscopy measurements. These measurements reveal that thiolate groups introduce mid-gap surface states, which, we argue, reduces the photoexcited electron–hole overlap and elongates Auger recombination times. These results highlight how a typically detrimental chemical species—mid-band gap NC surface states—can be beneficial under high-rate absorption/emission conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Particle Markov Chain Monte Carlo Approach to Inference in Transient Surface Kinetics

Here, in this work, we develop a novel Bayesian approach to study the adsorption and desorption of CO onto a Pd(111) surface, a process of great importance in natural sciences. The motivation for this work comes from the recent availability of time-resolved infrared spectroscopy data and the need for model interpretability and uncertainty quantification in chemical processes. The objective is to learn the relevant parameters that characterize the process: coverage with time, rate constants, activation energies, and pre-exponential factors. Our approach consists of three main schemes: (i) a problem design and probabilistic model for the whole system, (ii) a particle Markov chain Monte Carlo sampler to learn the hidden coverages and rate constant parameters, and (iii) two Bayesian formulations to infer the activation energies and pre-exponential factors. The flexibility of the Bayesian framework allows for uncertainty quantification where possible and integration of mathematical constraints in the model to reflect the system physically. We found that our results for the activation energies and pre-exponential factor are in agreement with those reported in the experimental literature, independently, and we provide discussions on the advantages and disadvantages as well as applicability to other systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photophysical and Time‐resolved Infrared Properties of Long‐Lived Rhenium(I) 4,5‐Diazafluorene Tricarbonyl Chromophores

This report investigates the synthesis, structural characterization, fundamental molecular photophysics, electrochemistry, UV-Vis spectroelectrochemistry, and time-resolved infrared spectroscopic properties of eight [fac-Re(dafR)(CO) 3 L] 0/+ complexes, where R=ethyl [(dedaf); 1, 3, 5, 7] or H [(dafH); 2, 4, 6, 8] and L=Cl− (1, 2), imidazole [(Im); 3, 4], 4-ethylpyridine [(4-Etpy); 5, 6], or pyridine [(py); 7, 8]. Universally, 1–8 yield higher energy photoluminescence (PL) emission bands and higher PL quantum yields (up to 53 %) than the classic 2,2’-bipyridine (bpy) and 1,10-phenanthroline (phen) ligated Re(I) tricarbonyl complexes. The excited state lifetimes of 1–8 lie between those corresponding to the bpy and phen derivatives, ranging from 120 and 1300 ns at room temperature. Combinations of reductive UV-Vis spectroelectrochemistry, transient absorption spectroscopy, and time-resolved infrared spectroscopy consistently assigned the lowest excited states in 1–8 being of metal-to-ligand charge transfer (MLCT) character. These new ReI MLCT chromophores follow classic energy gap law behavior and possess the characteristics necessary for serving as valuable photosensitizers suitable to energize excited state electron and energy transfer photochemistry.

Charge transfer↗
DOE OSTI2021

Solvation Dynamics of Wet Ethaline: Water is the Magic Component

The past two decades witnessed the development of a new type of solvent system, named deep eutectic solvents, which have become increasingly investigated because they offer new and potentially favorable properties, such as wide tunability in electrochemical, mechanical, and transport properties. Deep eutectic solvent (DES) systems are composed of at least one main solvent and an additional component that is meant to interrupt the original solvent/solvent interactions, thereby introducing lower melting points relative to each individual component. Ethaline (a 1:2 mole% mixture of choline chloride and ethylene glycol) is one of the most promising DES systems. However, it is also known to be very hygroscopic, which is a constant concern because water absorption during the use of ethaline alters its properties. Within this work, we demonstrate that modest amounts of water addition (1-10%) to ethaline are of little concern for practical use and can even lead to performance improvements, such as accelerated relaxation and solvation. In contrast, very small amounts of <1% of water lead to additional slowing of the solvent response. Thus, we suggest that the attempt to dry ethaline below 1% moisture is rather counter-productive if one attempts to achieve effective solvation and charge transport properties from DESs. This study investigates the effect of water content on the diffusional relaxation dynamics of ethaline. A set of independent spectroscopic experiments and computational simulations are aimed to provide insight into the solvent response of the DES system using femtosecond time-resolved absorption spectroscopy (fs-TA), broadband dielectric spectroscopy (BDS), nuclear magnetic resonance (NMR) diffusometry and broadband relaxometry, and molecular dynamics simulations (MDS) on ethaline with 0, 0.1, 1, 10, and 28.5wt% added water. For dry ethaline, we identify choline chloride as the rate-limiting solvation component in ethaline. However, the role of the solvent components changes gradually as water is added. Further, we provide quantitative solvent relaxation rates using the different presented time-resolved spectroscopic techniques and find remarkable agreement between them. Based on the solvent relaxation rates and combined with MDS, we develop a molecular understanding of the individual solvent components and their interactions in dry and wet ethaline with varying amounts of water content.

25 ENERGY STORAGE↗
DOE OSTI2021

Mechanism and dynamics of fatty acid photodecarboxylase

Photoenzymes are rare biocatalysts driven by absorption of a photon at each catalytic cycle; they inspire development of artificial photoenzymes with valuable activities. Fatty acid photodecarboxylase (FAP) is a natural photoenzyme that has potential applications in the bio-based production of hydrocarbons, yet its mechanism is far from fully understood. RATIONALE To elucidate the mechanism of FAP, we studied the wild-type (WT) enzyme from Chlorella variabilis (CvFAP) and variants with altered active-site residues using a wealth of techniques, including static and time-resolved crystallography and spectroscopy, as well as biochemical and computational approaches. RESULTS A 1.8-Å-resolution CvFAP x-ray crystal structure revealed a dense hydrogen-bonding network positioning the fatty acid carboxyl group in the vicinity of the flavin adenine dinucleotide (FAD) cofactor. Structures solved from free electron laser and low-dose synchrotron x-ray crystal data further highlighted an unusual bent shape of the oxidized flavin chromophore, and showed that the bending angle (14°) did not change upon photon absorption (step 1) or throughout the photocycle. Calculations showed that bending substantially affected the energy levels of the flavin. Structural and spectroscopic analysis of WT and mutant proteins targeting two conserved active-site residues, R451 and C432, demonstrated that both residues were crucial for proper positioning of the substrate and water molecules and for oxidation of the fatty acid carboxylate by 1 FAD* (~300 ps in WT FAP) to form FAD ∙– (step 2). Time-resolved infrared spectroscopy demonstrated that decarboxylation occured quasi-instantaneously upon this forward electron transfer, consistent with barrierless bond cleavage predicted by quantum chemistry calculations and with snapshots obtained by time-resolved crystallography. Transient absorption spectroscopy in H 2 O and D 2 O buffers indicated that back electron transfer from FAD ∙– was coupled to and limited by transfer of an exchangeable proton or hydrogen atom (step 3). Unexpectedly, concomitant with FAD ∙– reoxidation (to a red-shifted form FAD RS ) in 100 ns, most of the CO 2 product was converted, most likely into bicarbonate (as inferred from FTIR spectra of the cryotrapped FAD RS intermediate). Calculations indicated that this catalytic transformation involved an active-site water molecule. Cryo-Fourier transform infrared spectroscopy studies suggested that bicarbonate formation (step 4) was preceded by deprotonation of an arginine residue (step 3). At room temperature, the remaining CO 2 left the protein in 1.5 μs (step 4'). The observation of residual electron density close to C432 in electron density maps derived from time-resolved and cryocrystallography data suggests that this residue may play a role in stabilizing CO 2 and/or bicarbonate. Three routes for alkane formation were identified by quantum chemistry calculations; the one shown in the figure is favored by the ensemble of experimental data. CONCLUSION Finally, we provide a detailed and comprehensive characterization of light-driven hydrocarbon formation by FAP, which uses a remarkably complex mechanism including unique catalytic steps. We anticipate that our results will help to expand the green chemistry toolkit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the influence of ion-pairing on ligand-field excited-state dynamics

Exploration of the photophysical and photochemical properties of transition metal complexes has driven ground-breaking advancements in solar energy conversion technologies, including photoredox catalysis. While significant research has been devoted to understanding excited state properties of second- and third-row transition metal complexes, earth-abundant first-row metal complexes have received comparatively little attention in this context until very recently. In particular, the role of ion-pairing – which has been identified as a potentially significant factor for Ir(III)-based photosensitizers – has not been examined with regard to its influence on the ligand-field excited states that dominate much of first-row photophysics. A key challenge in studying ion-pair interactions lies in quantifying the extent and nature of ion-pairing, particularly in non-aqueous media where the vast majority of photophysical studies are performed. Cobalt(III) polypyridyl complexes provide an attractive platform to address such questions due to their demonstrated potential for applications in photoredox catalysis involving ligand-field excited states. In the present study, we prepared a cobalt(III) polypyridyl complex, [Co(4,4′-OMebpy) 3 ](BAr F 4 ) 3 (where 4,4′-OMebpy is 4,4′-dimethoxy-2,2′-bipyridine and BAr F 4 is tetrakis(3,5-bis(trifluoromethyl)-phenyl)borate) to probe ion-pairing in non-aqueous solutions. Specifically, analysis of data acquired from both variable-temperature diffusion ordered spectroscopy (DOSY) NMR and 1-D rotating-frame nuclear Overhauser effect (ROE) experiments allowed us to identify and differentiate between solvent-separated ion pairs in high-dielectric media and contact ion pairs in a low-dielectric solvent. Time-resolved absorption spectroscopy was then used to measure ground-state recovery dynamics under these varying conditions of ion-pairing, the results of which revealed an increase in excited-state lifetime for contact ion-pairs that we suggest arises from a reduction in outer-sphere reorganization energy relative to conditions which favored solvent-separated ion pairs. We believe this study demonstrates that one can leverage broadly available NMR-based methods to understand ion-pairing in non-aqueous solutions, which in turn can provide a microscopic picture of intermolecular interactions that can impact the photophysical properties of transition metal-based chromophores.

Ghosh, Atanu [Michigan State University, East Lans↗
DOE OSTI2021

ASAS J071404+7004.3 – a close, bright nova-like cataclysmic variable with gusty winds

ABSTRACT Despite being bright (V ≃ 11.8) and nearby (d = 212 pc) ASAS J071404+7004.3 has only recently been identified as a nova-like cataclysmic variable. We present time-resolved optical spectroscopy obtained at the Isaac Newton and the Hiltner and McGraw-Hill Telescopes, together with Swift X-ray and ultraviolet observations. We combined these with TESS photometry and find a period of 3.28 h and a mass transfer rate of $4\!-\!9\times 10^{-9}\, {\mathrm{M_{\odot }\, yr}^{-1}}$. Historical photometry shows at least one low state establishing the system as a VY Scl star. Our high-cadence spectroscopy also revealed rapidly changing winds emanating from the accretion disc. We have modelled these using the Monte Carlo python code and shown that all the emission lines could emanate from the wind – which would explain the lack of double-peaked lines in such systems. In passing, we discuss the effect of variability on the position of cataclysmic variables in the Gaia Hertzsprung–Russell diagram.

Inight, K. (ORCID:0000000222002416)↗