Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal electron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Photocurrent Nanoscopy of Quantum Hall Bulk

Understanding nanoscale electronic and thermal transport of two-dimensional (2D) electron systems in the quantum Hall regime, particularly in the bulk insulating state, poses considerable challenges. One of the primary difficulties arises from the presence of chiral edge channels, whose transport behavior obscures the investigation of the insulating bulk. Using near-field optical and photocurrent nanoscopy, we probe real-space variations of the optical and thermal dynamics of graphene in the quantum Hall regime without relying on complex sample or electrode geometries. Near the charge-neutrality point, we detect strong optical and photothermal signals from resonant inter-Landau-level (LL) magnetoexciton excitations between the zeroth and ± 1 st LLs, which gradually weaken with increasing doping due to Pauli blocking. Interestingly, at higher doping levels and full-integer LL fillings, photothermal signals reappear across the entire sample over an approximately 10 − μ m scale, indicating unexpectedly long cooling lengths and nonlocal photothermal heating through the insulating bulk. This observation suggests that thermal conductivity persists for the localized states even as electronic transport is suppressed—a clear violation of the Wiedemann-Franz law. Our experiments provide novel insights into nanoscale thermal and electronic transport in incompressible 2D gases, highlighting the roles of magnetoexcitons and chiral edge states in the thermo-optoelectric dynamics of the Dirac quantum Hall state. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗
DOE OSTI2020

Adapting the Electron Beam from SEM as a Quantitative Heating Source for Nanoscale Thermal Metrology

The electron beam (e-beam) in the scanning electron microscopy (SEM) provides an appealing mobile heating source for thermal metrology with spatial resolution of ~1 nm, but the lack of systematic quantification of the e-beam heating power limits such application development. Here, we systemically study e-beam heating in LPCVD silicon nitride (SiN x ) thin-films with thickness ranging from 200 to 500 nm from both experiments and complementary Monte Carlo simulations using the CASINO software package. There is good agreement about the thickness-dependent e-beam energy absorption of thin-film between modeling predictions and experiments. Using the absorption results, we then demonstrate adapting the e-beam as a quantitative heating source by measuring the thickness-dependent thermal conductivity of SiN x thin-films, with the results validated to within 7% by a separate Joule heating experiment. The results described here will open a new avenue for using SEM e-beams as a mobile heating source for advanced nanoscale thermal metrology development.

42 ENGINEERING↗
DOE OSTI2020

Thermal effects on the electronic properties of sodium electride under high pressures

Sodium is a simple metal at ambient conditions, while it transits to an electride phase at pressures above ~160 GPa along the room temperature isotherm. Here we explore the thermal effects on the electronic properties of the $hP4$ phase of sodium along the $ρ$ = 5.872 g/cm 3 isochore. We quantitatively classify this phase as an insulator based on the criterion of nearsightedness of the one-particle density matrix. Ab initio calculations suggest that the band gap of this insulator decreases with increasing temperature along the isochore, primarily because of ionic distortions; culminating in an insulator-to-metal transition upon melting at $T_m \approx 2100$ $\hbox{K}$. This transition is accompanied by residual electronic localization (in d orbitals) in the form of dynamic electron bubbles and a change in hybridization form $p–d$ to $s–p$ upon melting. This transition is explored by tracking the electronic and electro-optical properties along the isochore under consideration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Automotive Power Electronics and Electric Machine Thermal Management

The transition to modular and scalable electrified vehicle transportation requires technologies to improve power density within cost and reliability constraints to maximize vehicle platform flexibility. Key research challenges arise due to the limited packaging space, coolant distribution, electrical connections, and ambient temperatures. Challenges include thermal management for compact power-dense electric machines and the associated power electronics for power management within the vehicle. High-temperature silicon and wide-bandgap (WBG) based power electronics systems are of interest to enable compact and efficient electric drive systems. The higher temperatures present packaging challenges for thermal management and reliability. In this work, we provide an overview of research for thermal characteristics of materials, packages and thermal management approaches for enabling compact power dense automotive electric drive systems.

DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Electronically driven collapse of the bulk modulus in δ -plutonium

Plutonium metal exhibits an anomalously large softening of its bulk modulus at elevated temperatures that is made all the more extraordinary by the finding that it occurs irrespective of whether the thermal expansion coefficient is positive, negative, or zero—representing an extreme departure from conventional Grüneisen scaling. We show here that the cause of this softening is the compressibility of plutonium’s thermally excited electronic configurations, which has thus far not been considered in thermodynamic models. We show that when compressible electronic configurations are thermally activated, they invariably give rise to a softening of the bulk modulus regardless of the sign of their contribution to the thermal expansion. The electronically driven softening of the bulk modulus is shown to be in good agreement with elastic moduli measurements performed on the gallium-stabilized δ phase of plutonium over a range of temperatures and compositions and is shown to grow rapidly at small concentrations of gallium and at high temperatures, where it becomes extremely sensitive to hydrostatic pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Field reversal in low pressure, unmagnetized radio frequency capacitively coupled argon plasma discharges

In general, the radio frequency (rf) electric field within a sheath points toward the metal electrode in low pressure, unmagnetized rf electropositive capacitively coupled plasma (CCP) glow discharges. This is due to the large ratio of electron to ion mobility and the formation of an ion sheath. In this work, we studied, using fully kinetic particle-in-cell simulations, a reversed electric field induced by the strong secondary electron emission during the phase of sheath collapse in a high-voltage rf-driven low pressure CCP glow discharge. We explored the transition behavior of the formation of field reversal as a function of driving voltage amplitude and found that field reversal starts to form at around 750 V, for a discharge with an electrode spacing of 4 cm at 10 mTorr argon pressure driven at 13.56 MHz. Accordingly, the energy distribution function of electrons incident on the electrode shows peaks from around 3 to 10 eV while varying the driving voltage from 150 to 2000 V, showing potentially beneficial effects in plasma material processing where relatively directional electrons are preferred to solely thermal diffusion electrons.

Physics↗
DOE OSTI2021

Thermal effects mediating the flow induced by laser-induced optical breakdown

Here, a short focused laser pulse can generate a hot plasma, which expands then contracts and can eject a hot jet, the speed and direction of which is sensitive to the details of the plasma kernel. The coupling of thermal and chemical nonequilibrium plasma mechanisms with this hydrodynamic development is assessed with detailed simulations of a two-temperature, three-species plasma model. Time scales for electron recombination, thermal relaxation, and diffusion are compared to that of the plasma expansion to anticipate conditions in which these mechanisms might affect the vorticity generation that leads to the ultimate flow pattern. The effect of these mechanisms are analyzed through comparison with corresponding inert-gas and equilibrium models. Thermal-nonequilibrium effects are found to be weak due to rapid relaxation of the heavy-particle and electronic temperatures. In contrast, chemical equilibration occurs at a rate comparable to the expansion and thereby enhance both it and subsequent hydrodynamic mechanisms as the energy stored in ion formation during the preceding breakdown is released by electron recombination. Thermal conduction, enhanced by high-temperature free electrons, weakens the ejection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Thermal Modeling and Limitations for Power Electronics Embedded in Medium-Voltage Cables

As next-generation energy technologies gain traction and power demand increases, the existing electrical infrastructure faces significant stress, prompting innovative solutions to enhance the grid's capacity and lifespan. This work explores the possibility of embedding medium-voltage (MV) power electronics directly inline with the cable, and the resulting thermal challenges. Since the majority of power distribution cables installed in the U.S. are passively cooled, the work focuses primarily on passive cooling, with an emphasis on the limitations of axial heat spreading within the cable. To date, literature on axial spreading of high incident heat loads on cables and cable environments is limited, typically reporting cases with <10 W of incident heat load. This work will explore the considerations, limits, and tradeoffs of cable-embedded heat loads significantly larger than the cable losses. Both external and internal effects are modeled analytically in nondimensional terms via a Biot number analysis, allowing fundamental limits and tradeoffs to be derived. The work culminates in the design and experimental validation of a cable-embedded thermal system capable of passively dissipating 300 W of heat from a coaxial SiC mosfet switch module over a length of 20 cm, thus validating the possibility of MV cable-embedded power electronics from a thermal standpoint.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Multi-Task Learning of Scanning Electron Microscopy and Synthetic Thermal Tomography Images for Detection of Defects in Additively Manufactured Metals

One of the key challenges in laser powder bed fusion (LPBF) additive manufacturing of metals is the appearance of microscopic pores in 3D-printed metallic structures. Quality control in LPBF can be accomplished with non-destructive imaging of the actual 3D-printed structures. Thermal tomography (TT) is a promising non-contact, non-destructive imaging method, which allows for the visualization of subsurface defects in arbitrary-sized metallic structures. However, because imaging is based on heat diffusion, TT images suffer from blurring, which increases with depth. We have been investigating the enhancement of TT imaging capability using machine learning. In this work, we introduce a novel multi-task learning (MTL) approach, which simultaneously performs the classification of synthetic TT images, and segmentation of experimental scanning electron microscopy (SEM) images. Synthetic TT images are obtained from computer simulations of metallic structures with subsurface elliptical-shaped defects, while experimental SEM images are obtained from imaging of LPBF-printed stainless-steel coupons. MTL network is implemented as a shared U-net encoder between the classification and the segmentation tasks. Results of this study show that the MTL network performs better in both the classification of synthetic TT images and the segmentation of SEM images tasks, as compared to the conventional approach when the individual tasks are performed independently of each other.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Gamma Irradiation of NaCl-UCl 3 Salt for the Molten Chloride Fast Reactor

This report documents the results of the gamma ray irradiation of NaCl-UCl 3 eutectic salt in the Advanced Test Reactor (ATR) spent fuel pool gamma tube and subsequent analysis of capsules utilizing the Gas Assay Sample and Recharge (GASR) system. NaCl-UCl 3 salt capsules at four different temperatures, 75C, 150C, 300C and 600C, were irradiated shortly after the core internal changeout (CIC) of the ATR, beginning April 28 th of 2021, and ending on August 18 th of 2021. Re-positioning of the fuel elements in the spent fuel pool to move more fresh fuel elements around the gamma tube occurred on May 11 th of 2021, resulting in an approximate 20% increase in the dose rate and consequently the total absorbed dose. In total, the salt-filled capsules underwent 2638 hours of gamma irradiation from the adjacent freshly discharged ATR spent fuel. Capsule internal pressure measurements were taken via the Gas Assay Sample and Recharge (GASR) system in the INL Hot Fuels Examination Facility (HFEF) following completion of the irradiation. Based on the GASR analysis results, the primary conclusion from this experiment to-date is that radiolytic generation of chlorine gas is insignificant for the dose rates and total absorbed dose that these samples experienced. To elucidate more detailed effects of radiolysis on NaCl-UCl 3 eutectic salts and reach a more definitive conclusion, further advanced analyses such as electron microscopy, simultaneous thermal analysis, and electron paramagnetic resonance are recommended to analyze the capsule wall and salt samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Mapping Thermoelectric Transport in a Multicomponent Alloy Space

Abstract Interest in high entropy alloy thermoelectric materials is predicated on achieving ultralow lattice thermal conductivity κ L through large compositional disorder. However, here it is shown that for a given mechanism, such as mass contrast phonon scattering, κ L will be minimized along the binary alloy with highest mass contrast, such that adding an intermediate mass atom to increase atomic disorder can increase thermal conductivity. Only when each component adds an independent scattering mechanism (such as adding strain fluctuation to an existing mass fluctuation) is there a benefit. In addition, both charge carriers and heat‐carrying phonons are known to experience scattering due to alloying effects, leading to a trade‐off in thermoelectric performance. Analytic transport models are applied, based on perturbation and effective medium theories, to predict how alloy scattering will affect the thermal and electronic transport across the full compositional range of several pseudo‐ternary and pseudo‐quaternary alloy systems. To do so, a multicomponent extension is demonstrated to both thermal and electronic binary alloy scattering models based on the virtual crystal approximation. Finally, it is shown that common functional forms used in computational thermodynamics can be applied to this problem to further generalize the scattering behavior that is modeled.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Morphological-informed Thermal Property Prediction in the Engineering Domain

Using first-principle, atomic scale methods to predict thermal carrier (electron and phonon) behavior at nanoscale yields highly resolved thermal properties. Density functional theory simulations can model myriad effects on the transport of phonons and electrons (e.g., phonon and electron coupling, electron correlation, defect presence, carrier scattering), and yield thermal properties for small geometric domains such as thermal and electrical conductivity, or heat capacity. While these thermal properties are accurate in atomistic and nanoscopic systems, they must be scaled up to the microstructural domain to be a useful predictor for experimental basis, as the microscale is where myriad changes and physical phenomenon occur within a material (e.g., grain boundaries, precipitate aggregations, interfaces, defect clusters). My talk will discuss the necessity of thermal property predictions for nuclear fuels applications and more. Additionally I will discuss the necessity in developing multi-physics, multi-scale methods for future applications in predictions for not only nuclear fuels, but other materials applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing the thermal decomposition of plutonium (III) oxalate with IR and Raman spectroscopy, X-ray diffraction, and electron microscopy

The thermal decomposition of Pu(III) oxalate was analyzed by Raman microspectroscopy, infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. These data show that crystalline Pu 2 (C 2 O 4 ) 3 •9H 2 O progressively loses water and oxalate ligands as it is heated, which leads to a decrease in long-range lattice ordering, though minimal changes are observed in gross crystalline morphology. The onset of PuO 2 formation was observed between 200 - 250 °C. Thermal decomposition of oxalate ligands leads to the formation of CO 2 and plutonium oxalate-carbonate moieties, which had not been observed in previously published thermogravimetric measurements of Pu(III) oxalate. Formation of plutonium oxalate-carbonate moieties is believed to be associated with a change in the plutonium oxidation state from 3+ to 4+, which occurs prior to PuO 2 formation. The data provided herein demonstrate the rich spectroscopic nature of a rather underexplored, and technologically relevant, plutonium system. Ideally these results will further future investigations into the Pu(III) oxalate system both experimentally and computationally.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Collisionless cooling of perpendicular electron temperature in the thermal quench of a magnetized plasma

Thermal quench of a nearly collisionless plasma against an isolated cooling boundary or region is an undesirable off-normal event in magnetic fusion experiments, but an ubiquitous process of cosmological importance in astrophysical plasmas. Parallel transport theory of ambipolar-constrained tail electron loss is known to predict rapid cooling of the parallel electron temperature $T_{e\Vert}$ although $T_{e\Vert}$ is difficult to diagnose in actual experiments. Instead direct experimental measurements can readily track the perpendicular electron temperature $T_{e\bot}$ via electron cyclotron emission. The physics underlying the observed fast drop in $T_{e\bot}$ requires a resolution. Here two collisionless mechanisms, dilutional cooling by infalling cold electrons and wave-particle interaction by two families of whistler instabilities, are shown to enable fast $T_{e\bot}$ cooling that closely tracks the mostly collisionless crash of $T_{e\Vert}$. These findings motivate both experimental validation and reexamination of a broad class of plasma cooling problems in laboratory, space, and astrophysical settings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Disordered hyperuniform solid state materials

Disordered hyperuniform (DHU) states are recently discovered exotic states of condensed matter. DHU systems are similar to liquids or glasses in that they are statistically isotropic and lack conventional long-range translational and orientational order. On the other hand, they completely suppress normalized infinite-wavelength density fluctuations like crystals and, in this sense, possess a hidden long-range correlation. Very recently, there have been several exciting discoveries of disordered hyperuniformity in solid-state materials, including amorphous carbon nanotubes, amorphous 2D silica, amorphous graphene, defected transition metal dichalcogenides, defected pentagonal 2D materials, and medium/high-entropy alloys. It has been found that the DHU states of these materials often possess a significantly lower energy than other disorder models and can lead to unique electronic and thermal transport properties, which results from mechanisms distinct from those identified for their crystalline counterparts. For example, DHU states can enhance electronic transport in 2D amorphous silica; DHU medium/high-entropy alloys realize the Vegard's law and possess enhanced electronic bandgaps and thermal transport at low temperatures. These unique properties open up many promising potential device applications in optoelectronics and thermoelectrics. Here, we provide a focused review on these important new developments of hyperuniformity in solid-state materials, taking an applied and “materials” perspective, which complements the existing reviews on hyperuniformity in physical systems and photonic materials. As a result, future directions and outlook are also provided, with a focus on the design and discovery of DHU quantum materials for quantum information science and engineering.

2D materials↗
DOE OSTI2024

Thermal conductivity suppression in uranium-doped thorium dioxide due to phonon-spin interactions

In this work, impact of low level of uranium (U) atom substitution on thermal conductivity of thorium dioxide (ThO 2 ) is investigated. ThO 2 is an electronic insulator with a wide optical band-gap and no unpaired electrons whose thermal transport is governed by phonons. U-substitution introduces unpaired f-electrons resulting in paramagnetic behavior of U-ThO 2 at room temperature, which significantly suppresses its thermal conductivity. A single crystal of U-ThO 2 with graded composition of U is grown using a hydrothermal synthesis method, and thermal conductivity measurements are performed in regions with uniform composition of U at levels of 0%, 6%, 9% and 16%. Measured thermal conductivity profiles over 77–300 K temperature range are analyzed using an analytical expression for phonon-mediated thermal transport based on Klemens-Callaway model. Temperature dependent thermal conductivity is found to deviate significantly from the Rayleigh scattering trend expected for a simple substitutional point defect with a small perturbation to mass and interatomic forces. With the resonant scattering term, observed large suppression of thermal conductivity at low temperatures can be closely reproduced. Additionally, the extracted phonon-spin coupling constants imply a nonlinear relation of phonon-spin interaction intensity with respect to U doping percentage. Our study reveals how phonon-spin scattering contributed by unpaired f-electrons in U atoms influences thermal transport in the U-ThO 2 system.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced Electron Correlation and Significantly Suppressed Thermal Conductivity in Dirac Nodal-Line Metal Nanowires by Chemical Doping

Enhancing electron correlation in a weakly interacting topological system has great potential to promote correlated topological states of matter with extraordinary quantum properties. Here, the enhancement of electron correlation in a prototypical topological metal, namely iridium dioxide (IrO 2 ), via doping with 3d transition metal vanadium is demonstrated. Single-crystalline vanadium-doped IrO 2 nanowires are synthesized through chemical vapor deposition where the nanowire yield and morphology are improved by creating rough surfaces on substrates. Vanadium doping leads to a dramatic decrease in Raman intensity without notable peak broadening, signifying the enhancement of electron correlation. The enhanced electron correlation is further evidenced by transport studies where the electrical resistivity is greatly increased and follows an unusual $\sqrt{T}$ dependence on the temperature (T). The lattice thermal conductivity is suppressed by an order of magnitude via doping even at room temperature where phonon-impurity scattering becomes less important. Density functional theory calculations suggest that the remarkable reduction of thermal conductivity arises from the complex phonon dispersion and reduced energy gap between phonon branches, which greatly enhances phase space for phonon–phonon Umklapp scattering. This work demonstrates a unique system combining 3d and 5d transition metals in isostructural materials to enrich the system with various types of interactions.

36 MATERIALS SCIENCE↗