Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “suitability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Theoretical analysis of a refrigerant injection-enhanced air source heat pump with thermal energy storage for extended cold-climate and defrosting operations

This study investigates a conceptual refrigerant injection-enhanced air source heat pump with integrated thermal energy storage (ITES-ASHP) that combines two-phase flash tank injection with phase change material (PCM) thermal energy storage (TES) to extend cold-climate operation and maintain indoor heating during defrost. A steady-state, mode-based thermodynamic cycle model is developed to evaluate heating and defrosting modes with and without refrigerant injection and TES integration over an outdoor temperature range of 8 to −25 °C. The framework is applied to refrigerants R-290, R-454B, R-410 A, and R-32. A parametric study is conducted for an 18-kW system rated for an outdoor temperature of 8 °C, with the compressor frequency scheduled to 150 Hz. The optimal PCM phase-change temperature is identified as 20 °C for R-290, R-454B, and R-410 A, and 15 °C for R-32. At the design condition of −25 °C outdoor temperature, the proposed concept achieves a combined COP of 2.22 for R-290, corresponding to a 60% increase relative to the theoretical single-stage baseline for combined heating and defrosting operation. Safety screening based on compressor discharge temperature (≤ 120 °C) and injection quality (≥ 0.65), together with performance evaluation, indicates that R-290 is the most suitable candidate, followed by R-410 A and R-454B. Under the assumptions and constraints used here, R-32 is found to be less suitable due to excessive discharge temperatures and a higher risk of wet compression.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Large-scale production of 88 Y and 88 Zr/ 88 Y generators: A proof of concept study for a 70 MeV H – cyclotron

Here, the large-scale production of 88 Y with proton-induced reactions has been investigated from the perspective of new generation 70 MeV H – cyclotrons. Tandem target configurations are presented for both the direct production of 88 Y as well as for producing 88 Zr/ 88 Y generators. Based on the relevant excitation functions, physical yields have been derived for 88 Y production with Y 2 O 3 /SrCO 3 tandem targets and 88 Zr production with Zr/Y 2 O 3 tandem targets. Yields are presented for optimized targets (i.e. optimum yield) as well as for balanced thermal loads on the individual targets. Liquid 88 Zr/ 88 Y generators have been produced using both natural Zr and Nb target materials, the former for dedicated productions and the latter as a byproduct by processing spent irradiated Nb capsules which normally would constitute radioactive waste. These stock solutions, which contain both the target material and 88 Zr precursor, are retained virtually unchanged after processing except for the removal of 88 Y on AG MP-50 macroporous cation-exchange resin. Methods are presented for the preparation of Nb stock solutions in hydrofluoric acid and Zr stock solutions in sulfuric acid. It is shown that multi-Ci productions of 88 Y are feasible at a 70 MeV cyclotron facility, suitable for the needs of fracking applications. In addition, 88 Zr/ 88 Y generators can provide 88 Y with very high specific activity, suitable for labelling of biomolecules.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Assessment of a tomography-informed polyhedral discrete element modelling approach for complex-shaped granular woody biomass in stress consolidation

The design of handling equipment for granular biomass primarily requires experiments. Discrete element models (DEM) can provide designers with detailed insight into the behaviour of granular materials. However, granular biomass comprising complex-shaped particles is difficult to model with DEM. A tomography-informed DEM approach and an exhaustive assessment of the ability of the approach to predict the bulk behaviour of milled pines using experimental data is presented. Nano-CT scan was conducted to obtain 3D particle surface geometries as the basis for particle shape approximation by a polyhedral model and a sphero-polyhedral model. These models were applied in the simulation of a compressibility test. Our parametric study showed that particle Young's modulus and restitution coefficient are the two main properties influencing the simulated bulk behaviour of the DEM particles and that the level of approximating DEM particle shape for real particles is critical for accurately replicating the bulk behaviour of milled pines. The polyhedral model demonstrated better suitability than its sphero-polyhedral counterpart for modelling pine particles. The polyhedral model calibrated in a compressibility test was then applied in the simulations of a friction test without additional parameter tuning. Interlocking was dominant in the shear of bulk pine particles. Remarkably, the polyhedral model predicted the frictional behaviour of the pine particles when compared to the experimental results. The limitations of the model, as well as possible ways for enhancement, are discussed. This work provided novel insights into the suitability of complex-shaped DEM models for granular woody biomass.

Biomass flow↗
DOE OSTI2023

Coal-based graphene oxide-like materials: A comprehensive review

Coal is the most abundant energy and hydrocarbon resource in the United States which has been primarily used for power generation. With the increasing retirement of coal power plants and transition to a low-carbon emission economy, the future use of coal will likely shift to a feedstock source for production of valuable materials for different applications. In this review, the latest research reported on production of graphene-like materials in a powder form from coal is compiled and discussed. Here, this review includes: 1) brief background information on graphene and related materials (GRM); 2) relevant material, resource, economic, and socioeconomic information regarding suitability of coal as a potential feedstock for production of GRM; 3) a summary of common approaches for coal upgrading for preparation of more suitable precursors for production of GRM; 4) a compilation and analysis of the reported routes and methods for preparation of GRM from coal and coal derivatives; and 5) reported potential applications of coal-based GRM.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The synergistic effects of central core size and end group engineering on performance of narrow bandgap nonfullerene acceptors

Understanding the relationship between the molecular structure and photoelectric properties of fused-ring non-fullerene acceptors (NFAs) is of far-reaching significance to the development of organic solar cells (OSCs). Herein, six NFAs based on multiple thiophenes (4 T, 6 T and 8 T) are employed to systematically probe the synergistic effects of extending central core size and terminal fluorination. The absorption results manifest that the molecular absorption is comprehensively affected by molecular crystallinity, planarity, conjugation length and intramolecular electron push–pull effect, simultaneously. The intensity of electron push–pull effect is not only related to the electron-donating ability of central core and the electron-withdrawing ability of end group, but also may be related to the distance between the positive and negative centers. The extension of central core leads to the more planar backbone and stronger crystallinity of NFAs, and less energy loss (E loss ) in its based OSC. Compared with the extension of central core, terminal fluorination has a greater impact on molecular photoelectric properties. The terminal fluorination significantly enhances the push–pull effect, lowers the energy levels, and slightly increases the vibrational relaxation. As a result, the strongest crystallinity and coplanarity of 8TIC-4F lead to a low vibrational relaxation of 0.18 eV, which makes PTB7-Th:8TIC-4F device exhibit a small E loss of 0.51 eV and a high efficiency of 10.4%. In addition, the fluorinated 6TIC-4F with suitable core size exhibits suitable energy level, absorption, crystallization, and phase separation morphology, making its as-cast device up to 11.61% efficiency. Finally, to the best of the authors’ knowledge, the PCE of 11.61% for PTB7-Th:6TIC-4F based device without any treatment is one of the highest values reported for the NAFs with over 1000 nm absorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A systematic multicriteria-based approach to support product portfolio selection in microalgae biorefineries

Here this work proposes and applies a sequential approach of objective methods to aid the decision-making process for the deployment of microalgae biorefineries. The strategy combines Multicriteria Decision Analysis (MCDA) and weight assignment methods to simultaneously consider technical, economic, and environmental criteria to (1) outrank the best bioproduct options from different biomass fractions present in microalgae biomass at different ratios (namely carbohydrates, lipids, and protein) and (2) define the most suitable biorefining pathways associated with specific pairings of microalgae strains and cultivation conditions. The first part of the assessment identified succinic acid, acrylic acid, and citric acid as the top-ranked bioproducts from carbohydrates, polyurethane from lipids, and thermoplastic extrusion co-feed from protein. The second step of the analysis determined that, when production of a hydrocarbon fuel is desired, the compositional profile of a strain is paramount in defining the biorefining setup that should be pursued. In summary, microalgae lipids should be sent to the production of hydrocarbon fuels if the ratio between neutral lipids and fermentable carbohydrates is higher than roughly 1, with carbohydrates and protein being converted to the higher-value products noted above. Finally, this result was corroborated through process simulations, which indicated superior economic and environmental metrics when strains are paired with suitable conversion pathways identified through MCDA based on their compositional profiles. The outcomes of this work provide clear, objective, guidelines for establishing the best biorefining approach for a large suite of biochemical compositions as a screening method prior to employing detailed process simulations alongside rigorous techno-economic and life-cycle assessments.

09 BIOMASS FUELS↗
DOE OSTI2021

Assessment the leaching characteristics and long-term leaching behavior of some radionuclides from synthesized zeolite cement matrix

Highlights: • Synthesis and characterization of zeolite cement synthesized from fly ash • Leaching tests were used to assess the release rate of {sup 85}Sr and {sup 60}Co radionuclides. • Simple mathematical models were used to detect leaching mechanisms. • Long-term leaching behavior of {sup 85}Sr and {sup 60}Co from cementitious matrix was assessed. The development of cementitious materials remains a vital goal to produce valuable products with good mechanical, physical and chemical properties suitable for the safe disposal of concentrated radionuclides resulted from the treatment of contaminated solutions. In this paper, zeolite cement with good properties was laboratory synthesized from industrial by-products fly ash and characterized using various characterization techniques. The leaching characteristics of strontium and cobalt radionuclides from the synthesized zeolite cement were scrutinized conforming with the standard leaching methodology of International Atomic Energy Authority (IAEA). A mechanical strength assessment was executed to characterize the extent of immobilization process of the solidified matrices. The cumulative leaching fraction (φ) of the two studied radionuclides was found to be less than 5% in all examined conditions, which implies the applicability of the IAEA-recommended methodology for estimating the diffusion coefficient. The experimental leaching data were regressed nonlinearly to various mathematical kinetic models to assess the controlling leaching mechanism and to determine the leaching parameters. The regression results indicated that strontium ({sup 85}Sr) and cobalt ({sup 60}Co) leaching resulted from two succeeding mechanisms: as first order kinetic reaction, and then diffusion. The calculated values of leachability indices signify that the performance of each of the studied matrices is within an acceptable range. A simplified mathematical model, rooted in the first order reaction and diffusion mechanisms, was simulated to predict the radionuclides leaching rates from zeolite cement matrices. By comparing the synthesized zeolite cement with other cementitious materials, it can be concluded that the synthesized material can be classified as an efficient material suitable to immobilize {sup 85}Sr and {sup 60}Co from radioactive wastes. The acquired findings demonstrated that the studied immobilized waste matrices have acceptable mechanical effectiveness.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Analysis of persistent contaminants and personal care products by dispersive liquid-liquid microextraction using hydrophobic magnetic deep eutectic solvents

Here, in this work, hydrophobic magnetic deep eutectic solvents (HMDESs) were used in the development of a simple and rapid dispersive liquid-liquid microextraction (DLLME) approach coupled to high performance liquid chromatography with UV detection (HPLC-UV) for the determination of ten organic contaminants including five polycyclic aromatic hydrocarbons, four UV filters, and a pesticide from water at trace levels. The HMDESs were prepared by mixing a hydrogen bond acceptor, metal halide salt, and hydrogen bond donor in suitable molar ratios. Two HMDESs, 2 tetraoctylammonium bromide ([N 8888 + ][Br - ]): cobalt chloride (CoCl 2 ): 4 octanoic acid (OA) and 3 trioctylphosphine oxide (TOPO): neodymium chloride (NdCl 3 ): 3 OA, offered the highest analyte extraction efficiency overall and were chosen as suitable solvents for validation of the microextraction method. Under optimized extraction conditions, the method required 30 µL of HMDES as extraction solvent, acetone (87.5 µL) as disperser solvent, a NaCl concentration of 30% (w/v), and an extraction time of 120 s at 20°C. Enrichment factors of the analytes ranged from 44.6 for 3-(4-methylbenzylindene) camphor to 66.0 for 2-ethylhexyl-4-(dimethyl)aminobenzoate. The method provided low limits of detection (LODs) ranging from 0.5 to 4.5 µg L -1 , and acceptable precision, with RSD values lower than 9.6%. Furthermore, the validated method was successfully applied for tap and lake water analysis, resulting in relative recoveries of spiked samples ranging between 94.7 and 119.2%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Physics-Informed Machine Learning Models for Predicting the Progress of Reactive-Mixing

This paper presents a physics-informed machine learning (ML) framework to construct reduced-order models (ROMs) for reactive-transport quantities of interest (QoIs) based on high-fidelity numerical simu-lations. QoIs include species decay, product yield, and degree of mixing. The ROMs for QoIs are applied to quantify and understand how the chemical species evolve over time. First, high-resolution datasets for constructing ROMs are generated by solving anisotropic reaction-di?usion equations using a non-negative finite element formulation for di?erent input parameters. The reactive-mixing model input parameters are: time-scale associated with flipping of velocity, spatial-scale controlling small/large vortex structures of velocity, perturbation parameter of the vortex-based velocity, anisotropic dispersion strength/contrast, and molecular diffusion. Second, random forests, F-test, and mutual information criterion are used to evaluate the importance of model inputs/features with respect to QoIs. We observed that anisotropic dispersion strength/contrast is the most important feature and time-scale associated with flipping of velocity is the least important feature. Third, Support Vector Machines (SVM) and Support Vector Regression (SVR) are used to construct ROMs based on the model inputs. The constructed SVR-ROMs are then used to predict scaling of QoIs. We also present estimates and inequalities on the QoIs, which inform that the species decay, mix, and produce in an exponential fashion. These inequalities also inform that a radial basis function is the most suitable kernel for the SVM/SVR models for QoIs. It is observed that R2-score for SVR-ROMs on unseen data is greater than 0.9, implying that the SVR-ROMs are able to predict the reaction-diffusion system state reasonably well. Finally, in terms of the computational cost, the proposed SVM-ROMs are O(107) times faster than running a high-fidelity finite element simulation for evaluating QoIs. This makes the proposed ML-based ROMs attractive for reactive-transport sensing and real-time monitoring applications as they are significantly faster yet reasonably accurate.

Mudunuru, Maruti K.↗
DOE OSTI2021

Kink-antikink collisions and multi-bounce resonance windows in higher-order field theories

In this work, we study collisions of coherent structures in higher-order field-theoretic models, such as the Φ 8 , Φ 10 and Φ 12 ones. The main distinguishing feature, of the example models considered herein, is that the collision arises due to the long-range interacting algebraic tails of these solitary waves. We extend the approach to suitably initialize the relevant kinks, in the additional presence of finite initial velocity, in order to minimize the dispersive wave radiation potentially created by their slow spatial decay. We find that, when suitably initialized, these models still feature the multi-bounce resonance windows earlier found in models in which the kinks bear exponential tails, such as the Φ 4 and Φ 6 field theories among others. Also present is the self-similar structure of the associated windows with three- and more-bounce windows at the edges of two- and lower-bounce ones. Moreover, phenomenological but highly accurate (and predictive), scaling relations are derived for the dependence of the time between consecutive collisions and, e.g., the difference in kinetic energy between the incoming one and the critical one for one-bounces. Such scalings are traced extensively over two-bounce collision windows throughout the three models, hinting at the possibility of an analytical theory in this direction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Evaluation of a nonlinear variational multiscale method for fluid transport problems

Diverse transport problems, especially those based on fluid flow models, are intrinsically multiscale and nonlinear, characteristics that often lead to intricate dynamics such as the development of instabilities and turbulence. Computational simulations that resolve all scales in these problems are often unfeasible, prompting to coarse-grained simulation strategies in which small-scale features are modeled instead of resolved. Variational Multiscale (VMS) methods, and particularly residual-based Large-Eddy Simulation (LES) approaches, have proven effective and robust for the coarse-grained simulation of complex transport problems. VMS methods avoid the assumption of separable nonlinearity and the reliance on empirical small-scale models by using a variational decomposition of scales together with a residual-based approximation of the small-scales. Evaluation of a nonlinear VMS approach, denoted as VMS n , is presented for the coarse-grained simulation of transient-advective-diffusive-reactive (TADR) transport problems arising from fluid flow models. In contrast to classical VMS approaches that neglect the effect of the small scales on the transport operator, VMS n treats the inter-dependence between large- and small-scales upfront. The treatment of inter-scale coupling involves the solution of a local algebraic nonlinear system describing the evolution of the small-scales. The VMS n approach is complemented with two algebraic approximations of the small-scales: one based on the main diagonal of the transport matrices and another that preserves transport fluxes and is suitable for generic TADR systems. The suitability of the VMS n approach for handling general TADR problems and regimes is evaluated with benchmark incompressible, compressible, and magnetohydrodynamic laminar flow problems, the incompressible Taylor-Green vortex flow, the turbulent free jet, and the two-temperature arc in crossflow. Furthermore, simulation results show that VMS n leads to minor improvements in accuracy with respect to the classical VMS for the laminar flow problems, but to significantly greater accuracy for the turbulent flows and the unsteady plasma flow problems, while using the same cohesive numerical formulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Simulating low-energy neutrino interactions with MARLEY

Monte Carlo event generators are a critical tool for the interpretation of data obtained by neutrino experiments. Several modern event generators are available which are well-suited to the GeV energy scale used in studies of accelerator neutrinos. However, theoretical modeling differences make their immediate application to lower energies difficult. In this paper, I present a new event generator, MARLEY, which is designed to better address the simulation needs of the low-energy (tens of MeV and below) neutrino community. The code is written in C++14 with an optional interface to the popular ROOT data analysis framework. The current release of MARLEY (version 1.2.0) emphasizes simulations of the reaction 40 Ar ( ν e , e − ) 40 K ⁎ but is extensible to other channels with suitable user input. This paper provides detailed documentation of MARLEY's implementation and usage, including guidance on how generated events may be analyzed and how MARLEY may be interfaced with external codes such as Geant4. Further information about MARLEY is available on the official website at http://www.marleygen.org. Program title:MARLEY 1.2.0 CPC Library link to program files:https://doi.org/10.17632/4v7zxnc8j3.1 Developer's respository link:http://github.com/MARLEY-MC/marley Code Ocean capsule:https://codeocean.com/capsule/9868179 Licensing provisions: GNU General Public License 3.0 Programming language: C++14 External routines/libraries used: GNU Scientific Library [1,2] (required), ROOT [3,4] (optional) Nature of problem: Simulation of neutrino-nucleus scattering events at energies of tens-of-MeV and below Solution method: Initial two-to-two scattering kinematics are sampled using the allowed approximation differential cross section and tables of precomputed nuclear matrix elements. Subsequent de-excitations of the remnant nucleus are simulated using a Monte Carlo implementation of the Hauser-Feshbach statistical model and tabulated γ-ray decay schemes for discrete nuclear levels. Additional comments including restrictions and unusual features: Input data are provided with the code that are suitable for producing simulations of the charged-current reaction 40 Ar ( ν e , e − ) 40 K ⁎ , coherent elastic neutrino-nucleus scattering on spin-zero target nuclei, and neutrino-electron elastic scattering on any atomic target. Preparation of new reaction input files (whose format is documented in Appendix B) would enable other reaction channels and nuclear targets to be handled by the existing code framework. Although there is no maximum neutrino energy enforced by the code itself, realistic neutrino-nucleus scattering events may be generated up to roughly 50 MeV. Above this energy, the effects of forbidden nuclear transitions, which are neglected in the current treatment of the cross sections (see section 2.1), become increasingly important.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A bi-layer barrier design for 122-type iron-based superconducting wires and tapes

Iron-based superconducting wires and tapes hold great promise for high-field magnet applications. A promising design for 122-type wires and tapes based on the powder-in-tube method is using silver and copper double-layer sheaths. For this design a heat treatment temperature below ~ 779 °C is required to prevent Ag-Cu liquid formation. However, this may be below the optimal heat treatment temperature for the critical current density, and still cannot prevent Ag-Cu interdiffusion occurring in the solid state. In this work we propose adding a niobium or tantalum or vanadium (or their alloys) barrier layer between the Ag and Cu to solve the Ag-Cu interdiffusion issue, given that the group-VB metals (vanadium, niobium, tantalum) are relatively inert to both Ag and Cu. To investigate the effectiveness of this design, BaFe 1.84 Co 0.16 As 2 wires and tapes with Ag/Cu and Ag/Ta/Cu sheaths, as well as Ba 0.6 K 0.4 Fe 2 As 2 wires and tapes with Ag/Cu and Ag/Nb/Cu sheaths, were fabricated. It was found that both the Ta and Nb layers kept integral after wire drawing, but after a large flat-rolling reduction the Ta layer broke while the Nb layer kept integral. In the tapes with Ag/Cu sheaths (without the Ta or Nb layer) Cu diffused through the Ag layer and into the powder cores during 740 °C heat treatment, while in the tapes with Ag/Nb/Cu sheaths the Nb layer effectively blocked Ag-Cu interdiffusion even at 900 °C. Further, this work demonstrates that Ta is a suitable barrier material for 122-type wires, while Nb is suitable for both wires and tapes. In this design using Ag/Nb (or Ta)/Cu sheaths, we can regard the outer Cu as the conductor matrix while the Ag and Nb (or Ta) serve as two layers of barriers that suppress reactions between the components. Thus, we call this design a “bi-layer barrier” design for 122-type wires and tapes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Evaluating performance of different generative adversarial networks for large-scale building power demand prediction

We report as an unsupervised-learning data-driven model, Generative Adversarial Networks (GANs) have recently attracted a lot of attention for various applications. There is potential to apply GANs for large-scale building power demand prediction, which is needed for power grid operation. However, there are many GAN variations and it is unclear which GAN is suitable for this application. To answer this question, this paper identifies five promising GANs (Original GAN, cGAN, SGAN, InfoGAN, and ACGAN) and evaluates their performance for predicting building power demand at a large scale. Physics-based building energy models are developed to generate training and reference data. A new evaluation indicator that combines accuracy and reproducibility is proposed to evaluate the performance of different GANs in predicting building power demand. The results show that SGAN and InfoGAN are not suitable because they cannot control the number of generated building samples for different building types. The prediction performance among the Original GAN, cGAN, and ACGAN can vary depending on training sample sizes and number of building types. If the training sample size is sufficiently large, Original GAN and cGAN can predict building power demand more accurately than ACGAN with the same number of samples. If training samples are limited, Original GAN provides better accuracy than cGAN and ACGAN. When the number of building types increase, the prediction accuracy increases for cGAN, decreases for ACGAN, and remains the same for Original GAN. As a result, cGAN and Original GAN are recommended for large-scale building power demand prediction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Spatial and temporal characterization of municipal solid waste based on resource recovery pathways

This study presents a two-year, quarterly assessment of MSW across four source sectors (residential, schools, restaurants, and grocery stores) from sixteen sites across five U.S. states. MSW was manually sorted into 27 categories and aggregated into pathway fractions: high-moisture (HM) organics, low-moisture (LM) organics, recyclable (RC) materials, and residuals for disposal. Organics represented 89 % of the MSW stream. The largest fraction was HM organics consisting of food waste (31 %) and yard waste (3 %), with large coefficient of variations (CV), 79 and 278 %, respectively, reflecting high seasonal and site variability that varied significantly (p < 0.01) across sampling periods. The HM fraction showed properties favorable for anaerobic digestion, with moisture content ranging from 56 to 95 % and volatile solids ranges of 86-95 %. In contrast, the LM and RC fractions remained more stable (plastics CV = 41 %; paper CV = 53 %) with heating values up to 26.9 MJ/kg across sources, reflecting suitability for gasification. Microstructural analysis revealed less porosity in residential waste sampled at the landfill, which can influence preprocessing efficiency and microbial accessibility. Pathway informed allocations showed that 35 % of MSW is suitable for anaerobic digestion, 36 % for gasification, and 18 % for recycling, leaving 11 % requiring landfill disposal. These results provide quantitative evidence to determine feedstock allocation, waste-to-energy system design, and the development of data-driven sustainability and resource recovery strategies within a circular bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2025

Enhancing building resilience in cold climates: Integrating heat pump technologies with renewable energy

As electrification advances and Cold Climate Heat Pump technology progresses, ensuring grid stability becomes increasingly critical for effective heating in cold climates. However, natural disasters, especially during winter, pose significant threats to grid stability, impacting the reliability of air-source heat pumps. Despite these challenges, the integration of renewable energy sources and storage solutions in heating systems has not been extensively studied within the context of resilience. Here, this paper delves into the literature on renewable-powered heat pumps to assess their potential in enhancing building resilience in U.S. cold climate zones, which are particularly susceptible to extreme weather and grid disruptions. By leveraging renewable sources—solar, geothermal, and water—in conjunction with heat pump technology and supported by thermal or battery storage, this approach aims to provide a dependable solution for maintaining indoor heating during grid failures. Our analysis begins with a review of various renewable energy sources suitable for heat pumps, followed by an exploration of their application in cold climate regions across the U.S., and discussions on potential integration strategies with heat pump systems. This study highlights the advantages and suitability of solar irradiance and geothermal resources, emphasizing the importance of tailored, site-specific assessments to maximize energy efficiency and resilience. Additionally, it outlines the economic and environmental considerations necessary for implementing such systems and identifies potential challenges and areas for future research to facilitate the broader integration of renewable energy in heating solutions for enhanced resilience.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Whole-tree dormant season nitrogen pools for different species receiving combinations of fertilization and irrigation after one short rotation

Our understanding of the accretion and distribution of tree tissue nitrogen (N) pools across a variety of species and genotypes suitable for short-rotation woody crop (SRWC) production in response to water and N availability remains limited. We measured dormant-season, rotation-length, whole-tree N pools for five tree genotypes from four species (two eastern cottonwood, Populus deltoides Bartr., genotypes; American sycamore, Platanus occidentalis L.; American sweetgum, Liquidambar styraciflua L.; and loblolly pine, Pinus taeda L.) receiving irrigation (I), fertilization (F), their combination (IF), or no resources manipulation (C). Our results demonstrate that foliar nitrogen concentration [N] responded to fertilization but was constrained within genotype-specific ranges and varied temporally. Tree genotypes differed in their composite and component tissue N content (N C ), and these differences mostly reflected tissue mass (i.e., larger components and trees resulted in higher N C ). Resource amendments (I, F, IF) resulted in up to 3.8-fold increases in N C compared with C, which were most pronounced for sycamore and sweetgum with F and IF treatments, respectively. By the end of the rotation, forest stands accumulated 73 to 452 kg N ha –1 in tree tissues with 40 – 78 % distributed aboveground and 22 – 60 % distributed belowground. A critical difference between genotypes was that all hardwoods exhibited larger belowground N distributions than the evergreen conifer. Our results stress the importance of belowground N pools and highlight differences among genotypes. Furthermore, our study underscores valuable information about N pools across genotypes suitable for SRWC production, which can be leveraged to inform fertilization plans and devise sustainable nutrient management as production expands across marginal lands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Assessment of oil and gas fields in California as potential CO 2 storage sites

California's total annual greenhouse gas (GHG) emissions (425.3 MtCO 2 e) in 2018 were about 6.4% of the US total (6,677 MtCO 2 e) and around 1% of global emissions. About 39% of 2018 GHG emissions in California were from the industrial and electrical sectors. Many of these emissions were from large stationary point sources and were suitable for carbon capture retrofit with subsequent storage of the captured carbon dioxide (CO 2 ) in geological formations. Previous studies of California found suitable geology and CO 2 storage resource. This study refines and furthers prior work using a three-stage screening process of oil fields, gas fields, and underground natural gas storage (UGS) sites by combining criteria from previous studies while excluding sites that pose technical risk or are located in regions with surface restrictions including sensitive habitats and dense populations. In the first stage, 129 CO 2 storage sites in California were identified using qualification criteria based upon formation properties including geological conditions and pore pressure. The second stage identified sensitive sites by applying conservative screens including seismic activity, faulting, population density, restricted lands, and sensitive habitats. During the third stage, 61 CO 2 potential storage sites were identified by subtraction of stage 2 areas from stage 1. The potential storage volume in the third stage ranged from 1.0 to 2.0 GtCO 2 . Finally, we applied a scoring system with seven parameters to rank the 61 potential sites based on subsurface technical criteria. The scored sites are classified as high priority, medium priority, and sites for future study. Prospective CO 2 storage sites with high and moderate priority were selected and linked to CO 2 sources. There are 14 prospective sites (above 20 MtCO 2 storage resource per site) with a total storage resource of 1024 MtCO 2 distributed in Northern and Southern California. Of these sites, there are 9 potential CO 2 -EOR sites and 1 depleted oil field with a total estimated CO 2 storage volume of ~800 MtCO 2 in the Southern San Joaquin and Ventura Basin. These 10 prospective sites with a storage resource greater than 20 MtCO 2 could potentially deliver more than 20 years of storage with an average injection rate of 40 MtCO 2 /year. The remaining 4 highly prospective sites are in Northern California. Additionally, study results suggest that saline formations should be re-evaluated in concert with storage in oil, gas, and natural gas storage reservoirs.

58 GEOSCIENCES↗