Impact of Cycle Parameters on Moisture Removal Rate of a Sorption-based Dehumidification System
Explore the source record for details and available documents.
Ahmadi, Behnam↗
SEARCH · Engineering Papers
Results for “sorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental Study of an Energy-efficient Sorption-based Clothes Dryer
Explore the source record for details and available documents.
Ahmadi, Masoud↗
UNESE Data Analysis-Disko Elm Gas Transport Characteristics (NA-22 Quarterly Report)
Recently published papers have demonstrated the impact of sorption mechanisms on gas transport in the subsurface following an underground nuclear explosion. To include sorption processes in the multi-physics models of noble gas production and transport, researchers have conducted experiments of gas sorption in geologic materials and calibrated a linear (Henry’s law) sorption model for all gases in various geologic materials. As a part of Task #4, we requested the experimental data from Sandia Laboratories and derived a dual-mode (Henry’s absorption and Langmuir adsorption) sorption model. The derived model better describes the nonlinear sorption mechanism with much higher fitness with the experimental data. When gas concentrations are relatively low (in the conditions of field experiments or underground nuclear explosions) compared to those used sorption experiments, the nonlinear sorption model can be approximated as a linear sorption model. The equivalent Henry’s constant, which equals the product of Langmuir capacity and affinity, is systematically higher than the literature values. Further analyses and comparison of sorption models are planned in FY2020 Q4 and the sorption model will be coupled in models of nonisothermal multiphase transport for studying noble gas detectability.
58 GEOSCIENCES↗
Analysis of Organoiodide Adsorption Mechanisms
If the United States were to engage in the reprocessing of used nuclear fuel, radioactive iodine must be removed from multiple plant off-gas streams to comply with governing regulations. One of these streams is the vessel off-gas (VOG), which arises from the separations process and is expected to contain iodine in primarily organic iodine forms and at parts-per-billion concentrations. The relative lack of knowledge surrounding organic iodine removal from the VOG prompted the US Department of Energy’s Office of Nuclear Energy to initiate experimental efforts targeted at understanding organic iodide removal from prototypic VOG streams. At Oak Ridge National Laboratory (ORNL), this effort has focused on developing a comprehensive understanding of iodine removal from VOG streams by using silver-based sorbents. An important aspect of this testing is developing an understanding of how the sorption of methyl iodide (CH 3 I), the most studied organic iodide species to date, compares with the sorption of other volatile organic iodide species potentially present in the VOG. The work presented here reflects initial testing that will continue to be developed, and final results will be incorporated into an end-of-year report that details a multiyear testing campaign designed to understand iodine mitigation from VOG streams. The goal of these experiments was to determine whether similar reaction pathways govern both CH 3 I and iodobutane (C 4 H 9 I) sorption onto silver mordenite (AgZ), a common silver-based iodine sorbent. More specifically, the authors hypothesized that the sorption of C 4 H 9 I by AgZ will result in the formation of butanol (C 4 H9OH). Effluent monitoring of CH 3 I sorption testing has confirmed methanol production, but analogous monitoring of effluents from C 4 H 9 I sorption studies has not been performed. A series of tests was completed to test this hypothesis with the aim of detecting C 4 H 9 OH downstream of the AgZ bed. Test conditions varied the bed depth, gas stream humidity, and bed temperature post sorption. The effluent gas stream downstream of the AgZ bed was sampled by using gas-tight syringes, and these samples were analyzed by a gas chromatograph coupled to a mass spectrometer. Thin bed C 4 H 9 I tests conducted at -65 and 0°C dew points did not result in C 4 H 9 OH detection in the effluent. This suggests that the sorption mechanism and subsequent reactions could be different from those observed for CH 3 I. The sorption testing continues; additional results will be included in final end-of-year report and will increase the fundamental understanding of organic iodide sorption by AgZ from VOG streams.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Characterization of shale using Helium and Argon at high pressures
In order to estimate the shale gas in place and the eventual recovery during shale gas operations, one of the key requirements is to accurately characterize the shale’s petrophysical and transport properties such as porosity, permeability, diffusivity, and storage capacity. Despite the many efforts reported in the technical literature aiming to provide an improved understanding of the complex pore structures and the associated fluid flow in gas shales, complete characterization of organic-rich shale samples still poses a big challenge. Here, we have characterized mass transfer and sorption in shale at different length scales using Helium (He) and Argon (Ar) as probe gases. Thermogravimetric analysis (TGA) with a shale cube of ~1 cm 3 in size and gas expansion experiments with a full-diameter core (3.5” in diameter) were used to measure sorption kinetics/isotherms and mass transfer, respectively. Both samples are from the same depth/location in the Marcellus shale formation. The TGA steady-state technique was initially used to generate excess sorption isotherms for Ar, while dynamic TGA experiments were used to study its sorption kinetics. The TGA experiments demonstrate that Ar, which has a similar sorption potential as Methane, but is generally assumed to be inert, adsorbs onto the surfaces of the mesoporous and microporous regions of the shale samples according to a Langmuir-type behavior. Helium expansion experiments, on the full-diameter core, were used to measure the overall porosity, on the basis that He is a non-sorbing and inert gas as compared to Ar. The He expansion experiments, furthermore, allow us to delineate the mass transfer of gas across the inherent hierarchy of pore sizes, including macropores (macro- and microcracks), mesopores and micropores. Similar expansion experiments were also performed with Ar to study the combined impact of mass transfer and sorption. A triple-porosity model (TPM) was utilized to interpret the He expansion experiments with the shale core and to extract (estimate) relevant transport parameters. We report and compare here the diffusivities and permeabilities of the whole core for both He and Ar, as calculated from the modeling and fitting of the experimental data. On the premise that the shale cube is representative of the matrix region of the core, the Ar sorption kinetics from the cube experiments were subsequently combined with the transport parameters extracted from the He experiments to predict the behavior of the Ar expansion test with the full-diameter core. An excellent agreement is observed between the model predictions and the experimental data. The experimental observations and their interpretation indicate that one must be cautious when using Ar to estimate the true porosity and permeability of shales. In addition, we demonstrate that He and Ar probe gases, when used in tandem, can be employed effectively as a tool to characterize shales in terms of mass transfer and sorption dynamics across scales.
04 OIL SHALES AND TAR SANDS↗
M3SF-24LL010302052-Comprehensive Analysis of Radionuclide Interaction with Hydrothermally Altered Repository Materials
This progress report (Level 3 Milestone Number M3SF-24LL010302052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Work Package Number SF-24LL01030205. The research is focused on actinide and radionuclide sequestration in hydrothermally altered repository materials. In FY24, we completed a rigorous analysis of Se sorption to iron oxide phases using our L-SCIE sorption database. This effort explicitly accounts for surface titration behavior of oxide surfaces that was the subject of a recently published manuscript (Han et al., 2023). With this in mind, our Se sorption analysis now yields a more robust workflow for developing self-consistent surface complexation modeling approaches that can be adapted to specific SCM conceptual and numerical approaches (i.e. non-electrostatic, diffuse layer, triple layer models). In late FY24, we plan to publish the results of our comprehensive surface complexation modeling of Se(IV) and Se(VI) sorption to iron oxide mineral phases and provide a path forward to developing robust radionuclide sorption models for use in performance assessment. In FY24, we also submitted a manuscript summarizing our approach to integrating radionuclide sorption and coprecipitation phenomena and evaluation of radionuclide partitioning values across a range of radionuclides relevant to performance assessment. We demonstrated our approach in detail using Se sorption and coprecipitation with iron oxide minerals as a test case. This manuscript was recently accepted for publication in Applied Geochemistry (Balboni et al., Accepted). We also continued experiments to identify radionuclide interaction with hydrothermally altered crystalline repository and backfill materials. Recent research performed at Los Alamos National Laboratory (LANL) and Sandia National Laboratory (SNL) has provided key insights regarding the hydrothermal alteration behavior of bentonite backfill in the presence of repository materials (steel, concrete, etc.). We are now examining how mineral alteration affects retardation behavior of a suite of radionuclides of interest to repository performance assessment. These experiments also allow us to test the predictive ability of our component additivity approach to surface complexation and ion exchange. Our guiding hypothesis is that a robust surface complexation/ion exchange model and associated database, developed using our L-SCIE approach, can effectively predict changes in radionuclide sorption behavior resulting from the hydrothermal alteration of mineralogy in a repository near field. A short update of results to date is presented below.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Co-transport of water and p-xylene through carbon molecular sieve membranes
Carbon molecular sieve (CMS) materials are a potential candidate for scalable and high-performance reverse osmosis membranes due to their impressive chemical and thermal stabilities. Moreover, they have the potential to enable impressive rejections of small neutral solutes from water based on their known ability to separate small organic molecules. CMS has been extensively examined for gas and organic solvent separations, but the transport of organic and aqueous mixtures through CMS microstructures is poorly understood. In this work, we investigated the sorption, diffusion, and permeation behavior of organic compounds and water in poly(vinylidene fluoride)(PVDF)-derived CMS (PVDF-CMS). Experimental observations of diffusion, sorption, and permeation shows how the properties of penetrants such as polarity and molecular size affect the transport rates and selectivity. These basic transport and sorption parameters are utilized in sorption-diffusion models to permeation rates of water-organic mixtures in CMS membranes. The transport of water and p-xylene in CMS was experimentally confirmed to follow the sorption-diffusion mechanism. The sorption-diffusion model ideal permselectivity indicates that the CMS is p-xylene selective over water. Water/p-xylene mixture permeation experiments revealed an increased selectivity of p-xylene over water, thus providing tentative evidence for a competitive sorption-selective separation mechanism. Furthermore, this work suggests that CMS membranes exhibit organic-permeable separation properties in water/organic separations. The results presented here highlight the potential for the removal of dilute organics in water via CMS pervaporation membranes.
02 PETROLEUM↗
Plutonium reactive transport in fractured granite: Multi-species experiments and simulations
Plutonium (Pu) in the subsurface environment can transport in different oxidation states as an aqueous solute or as colloidal particles. The transport behavior of Pu is affected by the relative abundances of these species and can be difficult to predict when they simultaneously exist. This study investigates the concurrent transport of Pu intrinsic colloids, Pu(IV) (aq) and Pu(V-VI) (aq) through a combination of controlled experiments and semi-analytical dual-porosity transport modeling. Pu transport experiments were conducted in a fractured granite at high and low flow rates to elucidate sorption processes and their scaling behavior. In the experiments, Pu(IV) (aq) was the least mobile of the Pu species, Pu(V-VI) (aq) had intermediate mobility, and the colloidal Pu, which consisted mainly of precipitated and/or hydrolyzed Pu(IV), was the most mobile. The semi-analytical modeling revealed that the sorption of each Pu species was rate-limited, as the sorption could not be described by assuming local equilibrium in the experiments. The model was able to describe the sorption of the different Pu species that occurring either on fracture surfaces, in the pores of the rock matrix, or simultaneously in both locations. While equally good fits to the data could be achieved using any of these assumptions, a fracture-dominated process was considered to be the most plausible because it provided the most reasonable estimates of sorption rate constants. Importantly, a key result of this work is that the sorption rate constant of all Pu species tends to decrease with increasing time scales, which implies that Pu will tend to be more mobile at longer time scales than observations at shorter time scales suggest. This result has important implications for predicting the environmental impacts of Pu in the safety assessments of geologic repositories for radioactive waste disposal, and we explore potential mechanistic bases for upscaling the sorption rate constants to time and distance scales that cannot be practically evaluated in experiments.
58 GEOSCIENCES↗
Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling
With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive the refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudo-compression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus increases in this working capacity directly translate to a more compact and efficient cooling system. How-ever, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance, and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorb-ate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. Here this atomic level understanding of sorb-ate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we envision the capability to engineer designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structure–Transport Relationships of Water–Organic Solvent Co-transport in Carbon Molecular Sieve (CMS) Membranes
We explore the effects of the carbon molecular sieve (CMS) microstructure on the separation performance and transport mechanism of water–organic mixtures. Specifically, we utilize PIM-1 dense films and integrally skinned asymmetric hollow fiber membranes as polymer precursors for the CMS materials. The PIM-1 membranes were pyrolyzed under several different pyrolysis atmospheres (argon, carbon dioxide, and diluted hydrogen gas) and at multiple pyrolysis temperatures. Detailed gas physisorption measurements reveal that membranes pyrolyzed under 4% H 2 and CO 2 had broadened ultramicropore distributions (pore diameter <7 Å) compared to Ar pyrolysis, and pyrolysis under CO 2 increased ultramicropore volume and broadened micropore distributions at increased pyrolysis temperatures. Gravimetric water and p-xylene sorption and diffusion measurements reveal that the PIM-1-derived CMS materials are more hydrophilic than other CMS materials that have been previously studied, which leads to sorption-diffusion estimations showing water-selective permeation. Water permeation in the vapor phase, pervaporation, and liquid-phase hydraulic permeation reveal that the isobaric permeation modes (vapor permeation and pervaporation) are reasonably well predicted by the sorption-diffusion model, whereas the hydraulic permeation mode is significantly underpredicted (>250×). Conversely, the permeation of p-xylene is well predicted by the sorption-diffusion model in all cases. The collection of pore size analysis, vapor sorption and diffusion, and permeation in different modalities creates a picture of a combined transport mechanism in which water–under high transmembrane pressures–permeates via a Poiseuille-style mechanism, whereas p-xylene solutes in the mixture permeate via sorption-diffusion.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Molecular Structure of Adsorbed Water Phases in Silica Nanopores
The adsorption of water vapor in silica nanopores with different pore morphologies and surface hydrophilicities was studied to quantify the densities and thicknesses of the water sorption layers and deduce their molecular structures. Water adsorption to surface hydroxyls is described by a multilayer sorption model. At low pressure, the water adsorption isotherms are largely independent of pore size and the adsorbed amounts scale with the surface hydroxyl density. Adsorbed-phase densities corresponding to the adsorption of two water molecules per surface hydroxyl group are found in the first adsorbed water layer for a wide range of surface hydroxyl densities. The densities and layer thickness values found in narrow pores indicate that patchy adsorbed layers form if not enough water molecules exist for a full layer, which coexist with dry pore surface regions. This behavior indicates cooperative adsorption effects, i.e., a preference for the formation of hydrogen bonds between water molecules bound to surface hydroxyls. In narrow pores, pore condensation limits further growth of the sorption layer, and in larger pores and at the planar quartz surface, a second adsorbed water layer is formed, which can hold up to approximately 4 additional water molecules per surface hydroxyl group. The water molecules in these thicker adsorption layers arrange such that the sorption layer density is similar to the bulk water density. Pore confinement limitations on the sorption layers are observed in pores with radii of as large as 8 nm. Molecular dynamics modeling reveals two preferential orientations for water molecules adsorbing to surface hydroxyl groups and suggests an intralayer structuring in the adsorbed monolayer. Furthermore, adsorbed water molecules in the sorption layer are bonded to the surface hydroxyl group via the donation and acceptance of hydrogen bonds.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Membrane Adsorbents Comprising Self-Assembled Inorganic Nanocages (SINCs) for Super-fast Direct Air Capture Enabled by Passive Cooling
The objectives of the proposed project were to develop highly porous membrane adsorbents comprising CO 2 -philic polymers and self-assembled inorganic nanocages (SINCs) for rapid temperature swing adsorption using electricity-free solar heating and radiative cooling, enabling an economically viable approach for direct air capture (DAC). Our core technical activities combine three key innovations. (1) Highly porous flat-sheet membrane adsorbents contain CO 2 -philic amines that can be easily produced using a phase inversion method. (2) CO 2 -philic SINCs can be easily dispersed in the polymers with great stability (compared with the metal-organic frameworks or MOFs). (3) The adsorption and desorption are integrated with solar heating and radiative cooling for rapid continuous operation, in contrast to traditional long-cycle separate operation. The membrane adsorbents containing amines, polymers, and SINCs were produced using a one-step industrial process. The porous membranes coupled with porous SINCs offer low resistance for gas flow and fast CO 2 sorption/desorption cycles, while the incorporation of the additional amine groups provides high CO 2 sorption capacity. The key achievements are summarized below. (1) Membrane adsorbents with high PEI loading (>40%), high porosity of >80%, and low gasflow resistance were prepared in one step using commercially available, low-cost materials. (2) Membrane adsorbents based on Solupor and PEI show CO 2 sorption capacity of >1.5 mmol/g using air containing 400 ppm at a relative humidity of 15%. (3) Effect of the adsorbent compositions (such as PEI type, PEI content, SINC content, porosity) on the CO 2 sorption was systematically investigated. (4) Effect of the processing conditions (such as CO 2 content, temperature, and relative humidity) on the CO 2 sorption was systematically investigated; (5) The stability of the membrane adsorption against many cycles of sorption and desorption was studied. The higher molecular weight of PEI (PEI25k) shows better stability than PEI800. (6) Advanced materials with radiative cooling were developed, which can decrease the temperature by 5-7 °C compared to the ambient temperature. (7) Preliminary techno-economic analysis shows that our process may achieve a capture cost of $1,343/tonne CO 2 with a total OPEX cost of $1,112/tonne CO 2 . The adsorbent replacement cost accounted for 52% of the total OPEX cost. Membrane adsorbents with lower costs and longer operation life can significantly decrease the cost. The proposed project directly addresses the requirement of DE-FOA-0002188, i.e., novel materials with CO 2 adsorption capacity for direct air capture with integrated solar heating and radiative cooling to reduce the cost of the DAC. Our future work will focus on the development of low-cost adsorbents that can be stable at the sorption and desorption conditions for long term.
14 SOLAR ENERGY↗
Sorbent-based oxygen separation with YBC114 for energy storage systems
In our report we aimed to design, build, and evaluate an oxygen separation system to provide an inert sweep gas with low oxygen partial pressure (pO2) to redox-active thermochemical energy conversion reactors for a range of applications, including two-step redox cycles for thermochemical energy storage, water splitting, and carbon-dioxide splitting. The separation is based on an oxygen-selective sorbent, YBaCo4O7+δ (YBC114), which has excellent oxygen sorption and desorption properties demonstrated in our previous work. The oxygen separation performance of YBC114 was comprehensively studied by thermogravimetric analysis, sorption breakthrough experiments, and temperature swing sorption - desorption cycles. The results reveal that YBC114 can produce inert sweep gas with an oxygen concentration of less than 100 ppmv for at least 20 min during the thermal swing adsorption (TSA) cycle with the current sorption bed configuration, and the performance is consistent from cycle to cycle. The optimal sorption and desorption temperatures for the TSA process with YBC114 are determined to be 300 °C and 500 °C, respectively. Although challenges remain for the current separation system (e.g., high sorption temperature and slow kinetics), this study demonstrates the potential to use the oxygen-selective sorbent to produce an inert sweep gas, the feasibility of the oxygen separation concept, and guides new sorbent material development to make this application economically practical. A simple procedure is described for designing the YBC114 oxygen separation process.
42 ENGINEERING↗
Nanoporous weakly coordinating anionic frameworks (Final Technical Report)
Under this award, we synthesized and characterized new weakly coordinating, anionic covalent organic frameworks. The motivation was to expand the class of covalent organic frameworks though the introduction of the first weakly coordinating anionic ones. The significance of the weakly coordinating anionic character of these frameworks is associated with the character of the counter (metal) cations in their pores. Those counter-cations, due to the inability to effectively coordinate to the pore walls, have a “naked”, and thus highly electrophilic, Lewis acidic character. Such properties are expected to translate to a number of interesting physical properties that can be potentially used for a range of energy-relevant applications. One of these applications is gas adsorption, separation, and storage. The electrophilic, Lewis acidic character of the counter-cations are expected to strongly bind to gas molecules entering the pores leading to higher gas sorption capacities. Other applications include heterogeneous catalysis, ion exchange, and solid state ion conduction. Within the project we explored a range of chemical blocks, and tested synthesis conditions to polymerize these building blocks to form the target materials. In particular, we focused on materials with group 15 elements like phosphorus in the oxidation state +5 and the coordination number 6, that have a formal -1 charge. The synthesis of such materials is challenging because its success depends on the absence of residual monomeric and oligomeric side-products in the pores, and the absence of significant framework interpenetration. Crystalline forms of these materials require sufficient reversibility of the polymerization reaction (which is difficult to achieve because group 15 elements like P tend to make strong covalent bonds with neighbored elements), as well as suitable polymerization rates that prevent the formation of kinetically controlled products. We had success with the preparation of anionic porous organic frameworks with anionic building blocks containing P(V)O6 octahedra synthesized through Yamamoto coupling reactions. These materials are non-crystalline because of the irreversible nature of the Yamamoto coupling reaction, but show porosity. The porosity and surface area can be significantly increased by co-reaction with electrostatically neutral co-reactants. Very high porosity and surface areas can be achieved when the materials are washed with hydrochloric acid. This method is commonly used to free products from Yamamoto coupling reactions from by-products. Indeed, this method removed by products from the pores of our materials, however it also led to the hydrolysis of the PO6 octahedra to form pending phosphonic acid groups (-PO3H)-groups in the frameworks (PA-POFs) which was actually not desired. Nonetheless, these materials showed high CO2 sorption capacities. In addition, they show extremely high (actually record) sorption capacities for the removal of a range of common micropollutants such as bisphenol A (BPA) and 4-nitrophenol in water. BPA is a wide-spread organic pollutant and a known endocrine disruptor. The maximum adsorption capacity of BPA at equilibrium is found to be as high as 3,366 mg g-1 by Langmuir adsorption model, which is more than 10 times greater than peer materials. The polymer also rapidly removes various other organic micropollutants with more than 90% removal efficiencies. In addition, the PA-POF material can be regenerated at least five times by mild washing using methanol without significant loss in removal efficiency. This is significant advantage over commonly used activated carbon materials (that are in Brita water faucet filters, for example). Comparison studies showed that only materials with the phosphonate groups show extreme sorption although the number of PA group is actually small according to solid state NMR and EDX data. More research would be needed to investigate why this is (a possibility is that the phosphonate groups have a multiplying effect in which a PA-induced initial adsorption leads to the adsorption of much more adsorbate). The extreme sorption capabilities can also be visually seen when colored adsorbates such as 4-nitrophenol are used, as the adsorption of the nitrobenzene leads to the decoloration of the solution. We have produced three short videos that illustrate the sorption capabilities compared to two peer materials (activated carbon from dismantled Brita water filters, and a electrostatically neutral, chemically related, porous organic polymer, respectively).
36 MATERIALS SCIENCE↗
Molecular-Scale Understanding of Sulfate Exchange from Schwertmannite by Chromate Versus Arsenate
Schwertmannite effectively sorbs chromate (Cr(VI)), yet the sorption mechanisms remain elusive. We determined the Cr(VI) sorption mechanisms on schwertmannite at pH 3.2 and 5 using combined macroscopic sorption experiments with molecularscale characterization and by comparing them to arsenate (As(V)) sorption. Cr(VI) adsorbs as bidentate-binuclear (BB) inner-sphere complexes through exchanging more sulfate and less >Fe–OH/OH 2 , with 0.59–0.71 sulfate released per Cr(VI) sorbed. While As(V) also forms BB complexes, it exchanges sulfate and >Fe–OH/OH 2 equally with 0.49–0.52 sulfate released per As(V) sorbed. At high As(V) loadings, As(V) precipitates as amorphous FeAsO 4 , particularly at low pH. The abovementioned differences between Cr(VI) and As(V) can be related to their different ionic radii and binding strength. Moreover, Cr(VI) and As(V) preferentially exchange sulfate innersphere complexes, increasing the proportion of sulfate outer-sphere complexes in schwertmannite. In turn, the concentration of sulfate outer-sphere complexes increases and then decreases with increasing Cr(VI) loading. Results suggest that an oxyanion, which would form inner-sphere complexes on a mineral surface, preferentially exchanges inner-spherically bound oxyanions than outerspherically bound ones on the surface, even though both are exchanged. Furthermore, this study improves our understanding of the sorption of oxyanions on schwertmannite and their capabilities to template schwertmannite formation and stabilize its structure.
54 ENVIRONMENTAL SCIENCES↗
Community Data Mining Approach for Surface Complexation Database Development
This paper presents a comprehensive data-to-model workflow, including a findable, accessible, interoperable, reusable (FAIR) community sorption database (newly developed LLNL Surface Complexation/Ion Exchange (L-SCIE) database) along with a data fitting workflow to efficiently optimize surface complexation reaction constants with multiple surface complexation model (SCM) constructs. This workflow serves as a universal framework to mine, compile, and analyze large numbers of published sorption data as well as to estimate reaction constants for parameterizing reactive transport models. Here the framework includes (1) data digitization from published papers, (2) data unification including unit conversions, and (3) data-model integration and reaction constant estimation using geochemical software PHREEQC coupled with the universal parameter estimation code PEST. We demonstrate our approach using an analysis of U(VI) sorption to quartz based on a first L-SCIE implementation, concluding that a multisite SCM construct with carbonate surface species yielded the best fit to community data. Surface complexation reaction constants extracted from this approach captured all available sorption data available in the literature and provided insight into previously published reaction constants and surface complexation model constructs. The L-SCIE sorption database presented herein allows for automating this approach across a wide range of metals and minerals and implementing novel machine learning approaches to reactive transport in the future.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Synergistic Enhancement of Lead and Selenate Uptake at the Barite (001)–Water Interface
The interactions of heavy metals with minerals influence the mobility and bioavailability of toxic elements in natural aqueous environments. The sorption of heavy metals on covalently bonded minerals is generally well described by surface complexation models (SCMs). However, understanding sorption on sparingly soluble minerals is challenging because of the dynamically evolving chemistry of sorbent surfaces. The interpretation can be even more complicated when multiple metal ions compete for sorption. In the present study, we observed synergistically enhanced uptake of lead and selenate on the barite (001) surface through two sorption mechanisms: lattice incorporation that dominates at lower coverages and two-dimensional monolayer growth that dominates at higher coverages. Further, we also observed a systematic increase in the sorption affinity with increasing co-sorbed ion coverages, different from the assumption of invariant binding constants for individual adsorption processes in classical SCMs. Computational simulations showed thermodynamically favorable co-incorporation of lead and selenate by simultaneously substituting for barium and sulfate in neighboring sites, resulting in the formation of molecular clusters that locally match the net dimension of the substrate lattice. These results emphasize the importance of ion–ion interactions at mineral–water interfaces that control the fate and transport of contaminants in the environment.
54 ENVIRONMENTAL SCIENCES↗