Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sliding control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Controlling Deformation in Al/Ti: How Interface Roughness and Orientation Drive Bimetal Mechanics

The microstructural characteristics and morphology of interfaces in metals can be crucial in governing the initiation of plasticity and early deformation mechanisms under extreme conditions. During high-strain-rate deformation, these interfaces significantly affect dislocation nucleation, twinning, and other mechanisms that directly impact material strength and failure. Despite their importance, a substantial knowledge gap remains between the observed macroscopic material behavior and the underlying role of bimetal interfaces in plasticity initiation. Here, to address this gap, large-scale molecular dynamics simulations are performed on Al/Ti bimetal structures to examine the effect of interface characteristics on the onset of plasticity under uniaxial compression. Specifically, this study investigates how interface roughness (flat vs waveform interfaces) modifies the initiation of plastic events in the microstructure. Atomistic simulations indicate that interface roughness (a microscopic behavior) reduces the stress required for dislocation nucleation, thereby reducing the peak stress relative to a flat interface. For the square interface, the step height strongly influences plasticity initiation by setting the separation of locally flat regions. Varying the interface rotation relative to the loading direction (macroscopic behavior) reveals that the peak stress for both flat and waveform interfaces initially decreases and then increases with rotation, accompanied by a shift in dominant mechanisms—from Al twinning (flat) to interface sliding and Ti-dominated phase transformation and twinning at lower angles. The change in the stress-strain slope during initial compression reflects how rotation alters the resolved shear stress and activates different slip systems. Overall, the study provides valuable insights into the role of bimetal interfaces in controlling plasticity initiation and early deformation pathways for Al/Ti under extreme loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sample Type Adaptable RNA depletion performance data [Slides]

Sequencing data was aligned to rRNA data sets QIIME_16S_MiDAS_4.8.1 and SILVA_138.1_LSURef_NR99 using BWA. RNA used was a composite (pool) of wastewater RNA samples collected at LANL between April 2022 and December 2022. RNA sample was split into four aliquots (STAR depletion and STAR depletion no-probe-control as well as RiboZero and RiboZero no-probe-control). All sequencing libraries were prepared from the depleted RNA samples using the same library prep method and sequenced on Illumina platforms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Tailorable Cellulose II Nanocrystals (CNC II) Prepared in Mildly Acidic Lithium Bromide Trihydrate (MALBTH)

Preparing cellulose II nanocrystals (CNC II) requires a polymorph transformation of natural cellulose I feedstocks. The transformation is usually achieved via a process such as mercerization or dissolution–regeneration. This study demonstrated a new method to prepare CNC II directly from bleached kraft pulp (BKP, a commercially available cellulose I feedstock) in a mildly acidic lithium bromide trihydrate (MALBTH) system, a concentrated (~61 wt%) solution of LiBr in water with a very low concentration (2.5 mM) of sulfuric acid. First, the BKP was treated in the MALBTH system to generate a cellulose II hydrolysis solid residue (CHR) with a yield of 64–86%, during which the selective hydrolysis of disordered cellulose and the polymorph transformation were completed simultaneously. Then, subsequent oxidation of the CHR by ammonium persulfate (APS, 0.1–0.6 M) resulted in the CNC II with high yield (up to 62%), high crystallinity (over 90%), rich surface carboxyl group (0.3–1.2 mmol g-1 cellulose), excellent colloidal stability (up to -59 mV zeta potential), and high thermal stability. The CNC II had a tunable length (26–57 nm), determined by the conditions of the MALBTH hydrolysis and the APS oxidation, but similar lateral dimension (8–10 nm). The characterization of the CHR by wide-angle X-ray diffraction and Fourier transform infrared spectroscopy verified the polymorphic transformation from cellulose I to II during the MALBTH treatment. The swelling of the BKP in the MALBTH enabled cellulose crystallites to slide and reassemble, which completed the rearrangement of cellulose chains from parallel to anti-parallel conformation (polymorph transformation from cellulose I to II). This study provided an efficient and green method to produce cellulose II nanocrystals with controllable aspect ratios via the simultaneous hydrolysis and polymorph transformation of cellulose I feedstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Ultraflexible Smart FLoating Offshore Wind Turbine (USFLOWT) (Final Report) [Slides]

In this final report, we summarize activities and results from the Ultraflexible Smart Floating Offshore Wind Turbine (USFLOWT) project. The project involved co-design of a 10-MW floating offshore wind system, especially the substructure. This substructure was based on the SpiderFLOAT, an ultra-compliant, ultralight, and modular system with actuators for smart platform control that was promising for control co-design. The project’s overall goal was to unlock the floating offshore wind market based on conditions on the North Atlantic coast of the United States. Tasks summarized in the report include Task 2.3 (including controller design for the turbine and the substructure and final design of the SpiderFLOAT), Task 2.4 (final design of the active can ballasting actuator), Task 2.5 (planning for a scale demonstrator), Task 3.1 (technology to market plan), and Task 3.3 (approval in principle). The report also summarizes project dissemination activities at a variety of venues including the lead author and/or presenter for each.

17 WIND ENERGY↗
DOE OSTI2025

Seeing is Believing: Autonomous Microscopy and the Data Revolution in Materials Science [Slides]

Machine intelligence has the potential to revolutionize materials science, enabling autonomous synthesis, self-driving characterization, and accelerated modeling. However, despite the promise, successful implementation of these methods in day-to-day research remains a challenge. This talk will delve into the reasons behind this, exploring how truly intelligent experiments are hindered by opaque experiment control, a lack of domain-specific models, and human-centric design. Through a focus on the characterization of next-generation microelectronics and energy storage materials, I will share insights from both successful and failed attempts to implement machine intelligence. We will then explore the next steps necessary to unlock the full potential of machine intelligence in materials science, creating a future where intelligent systems work seamlessly alongside researchers to drive innovation and discovery.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nuclear reactor core support system providing radial and axial support

A nuclear reactor core mechanical support bracket is disclosed. The support bracket includes a housing, a spring disposed internally within the housing, a shaft slidingly disposed within the housing, a shaft travel pin, and a flange. The shaft is configured to engage the spring to compress and decompress the spring as the shaft travels in and out of the housing. The shaft travel pin controls the travel of the shaft. The flange is configured to mount the nuclear reactor core mechanical support bracket to a canister of a nuclear reactor. The shaft includes an inset configured to interface with a nuclear reactor core component.

Aleshin, Yuriy↗
DOE OSTI2023

Micro-reactor core mechanical support

A nuclear reactor core mechanical support bracket is disclosed. The support bracket includes a housing, a spring disposed internally within the housing, a shaft slidingly disposed within the housing, a shaft travel pin, and a flange. The shaft is configured to engage the spring to compress and decompress the spring as the shaft travels in and out of the housing. The shaft travel pin controls the travel of the shaft. The flange is configured to mount the nuclear reactor core mechanical support bracket to a canister of a nuclear reactor. The shaft includes an inset configured to interface with a nuclear reactor core component.

Aleshin, Yuriy↗
DOE OSTI2024

Risk-based System Upgrade Planning for AOT-IC Presentation [Slides]

The number of deployed systems and different HW/SW form factors makes it difficult to maintain a complete understanding of their health which leads to a reduced level of certainty when assessing risk and trying to prioritize system upgrade efforts. AOT-IC must constantly plan and execute system upgrade and replacement projects to ensure the longevity of the control system. There are many more projects needed than the group can realistically accomplish given schedule and resource constraints. The group must prioritize their upgrade projects to choose only the highest priority projects to execute each year. Currently plans upgrade and replacement projects based on alignment with mission needs, group vision, resource availability, and qualitative risk assessments based on SME estimates. The group maintains a risk register. This is useful as a tool for shaping strategic planning but currently lacks the quantitative data and process needed to generate accurate risk assessments.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Fluid‐Driven Cohesive Strengthening: Critical Role of Reaction Kinetics as the Determinant for Frictional Stability

After an earthquake, faults in the Earth's crust lock up and slowly regain strength. This process, called fault healing, plays a key role in determining how often earthquakes happen and how large they can be. While scientists know that healing involves both mechanical friction and chemical changes in rocks, it has been unclear how these processes work together, especially over shorter timescales in laboratory settings. In our study, we ran controlled experiments on the mineral anhydrite under different fluid conditions. We found that the presence and pressure of water speeds up fault healing by triggering a chemical reaction that strengthens the fault over time. This strengthening makes the fault more resistant to sliding, which could delay future earthquakes—but also sets the stage for larger ones when they do occur. We propose a model that combines frictional and chemical processes to explain this water‐activated, time‐dependent healing. Importantly, our results show that even faults typically considered stable could still produce earthquakes if they undergo sufficient chemical healing. This has broad implications for understanding where and when earthquakes might strike, especially in fluid‐rich environments such as subduction zones and geoenergy settings.

Affinito, R [Pennsylvania State Univ., University ↗
DOE OSTI2024

Changing effects of external forcing on Atlantic–Pacific interactions

Recent studies have highlighted the increasingly dominant role of external forcing in driving Atlantic and Pacific Ocean variability during the second half of the 20th century. This paper provides insights into the underlying mechanisms driving interactions between modes of variability over the two basins. We define a set of possible drivers of these interactions and apply causal discovery to reanalysis data, two ensembles of pacemaker simulations where sea surface temperatures in either the tropical Pacific or the North Atlantic are nudged to observations, and a pre-industrial control run. We also utilize large-ensemble means of historical simulations from the Coupled Model Intercomparison Project Phase 6 (CMIP6) to quantify the effect of external forcing and improve the understanding of its impact. A causal analysis of the historical time series between 1950 and 2014 identifies a regime switch in the interactions between major modes of Atlantic and Pacific climate variability in both reanalysis and pacemaker simulations. A sliding window causal analysis reveals a decaying El Niño–Southern Oscillation (ENSO) effect on the Atlantic as the North Atlantic fluctuates towards an anomalously warm state. The causal networks also demonstrate that external forcing contributed to strengthening the Atlantic's negative-sign effect on ENSO since the mid-1980s, where warming tropical Atlantic sea surface temperatures induce a La Niña-like cooling in the equatorial Pacific during the following season through an intensification of the Pacific Walker circulation. The strengthening of this effect is not detected when the historical external forcing signal is removed in the Pacific pacemaker ensemble. The analysis of the pre-industrial control run supports the notion that the Atlantic and Pacific modes of natural climate variability exert contrasting impacts on each other even in the absence of anthropogenic forcing. The interactions are shown to be modulated by the (multi)decadal states of temperature anomalies of both basins with stronger connections when these states are “out of phase”. We show that causal discovery can detect previously documented connections and provides important potential for a deeper understanding of the mechanisms driving changes in regional and global climate variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper

Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have monitored the three-dimensional displacements of a fluid-driven fracture during water injections in a borehole at ~1.5 km depth in the crystalline rock of the Sanford Underground Research Facility (USA). The fracture initiates at 61% of the minimum horizontal stress by micro-shearing of the borehole on a foliation plane. As the fluid pressure increases further, borehole axial and radial displacements increase with injection time highlighting the opening and sliding of a new hydrofracture growing ~10 m away from the borehole, in accordance with the ambient normal stress regime and in alignment with the microseismicity. Our study reveals how fluid-driven fracture stimulation can be facilitated by a mixed-mode process controlled by the complex hydromechanical evolution of the growing fracture. The data presented in this submission refer to the SIMFIP measurements and analyses of the stimulation tests conducted on the 164 ft (50 m) notch of the Sanford Underground Research Facility (SURF), during the EGS-Collab test 1. In addition to the datafiles, there is the draft of a manuscript submitted to Geophysical Research Letters (GRL).

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

The ASD Scorpius Accelerator at the NNSS. Recruitment Slides for the University of Nevada, Reno [Slides]

The Scorpius Accelerator: Supports the maintenance of the US nuclear stockpile, helps the US not return to nuclear testing, is one of four diagnostics being installed 963 feet below ground, probes subcritical implosions of nuclear material, and supports the validation of LANL and LLNL computer codes. We are searching engineers and scientists with experienced in: Mechanical Engineering, Electrical Engineering, Pulsed Power, Plasma Physics, Controls, Diagnostics, and Fluids and pressure systems.

42 ENGINEERING↗
DOE OSTI2021

Radiation Dispersal Devices. A brief overview [Slides]

In this presentation I lump together the "classified RDD" - a dispersion of aerosolized radioactive material - with the nefarious use of radioactive materials. This can include other means of dispersal as well as an RED - a Radiological Exposure Device. This combination is because the threat is the nefarious use of radioactive material, and most of our concerns are in regards to the loss of control of the material, potential(s) for misuse, and detection.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

INECP Case Studies [Slides]

The following “INECP Case Studies” document contains two case studies: Corrosion-Resistant Valves and Case Study: Dual-Use Items for Gas Centrifuge. The content of both of these case studies was approved for unlimited release in 2013. The case studies have been reorganized or slightly altered to make them more easily presentable during virtual or in-person International Nonproliferation Export Control Program (INECP) programmatic trainings and engagements. The document also contains the original case studies with LA-UR release numbers. The original studies were included in the document as a reference for derivative classification and export control.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

Utility Perspective on Protection Challenges with High IBR Penetration [Slides]

Utilities have seen rapid increase in Solar, Wind, and Battery Energy Storage Resources that interconnect to their electric system through Inverters. Inverter-Based Resources (IBRs) have fault current characteristics that are unlike the fault current response of traditional rotating-machine-based generators, which is well known and repeatable. IBR’s non-traditional fault current behavior is due to the IBR control scheme, which is configured to provide a clean AC output but also protect the inverter’s sensitive power electronics devices from damage, one source of which is overcurrent. This results in low fault current magnitude, low or no negative sequence current injection, the variability of sequence component currents, the variability of voltage with respect to current angles, and the lack of inertia. The control scheme also results in a fault current response that can vary between manufactures and between models of the same manufacturer. High penetration of IBRs can adversely affect the protection schemes applied in areas with high penetration of IBRs. With the proliferation of IBRs, utilities are finding out that conventional protection schemes are not adequately equipped to protect the electric systems. This is mainly because the existing protection elements and practices have been designed based on the fault current response of conventional rotating machines. In several cases, the available literature does not provide any clear solution for the issues when the protection scheme does not operate properly near IBRs. This report identifies various protection challenges due to IBRs that industry is facing, from the utility perspective. Instead of facing on one issue, this report looks broadly on all the challenges that system protection has experienced with high penetration of IBRs. Based on the IBR response from various utilities during real fault events and gathering perspective from different utility SMEs via questionnaire, the report summarizes on gathered data and internal experiences.

14 SOLAR ENERGY↗
DOE OSTI2024

Utah FORGE 10-3726: Geothermal Multiset Straddle for High Temperature Applications - 2024 Annual Workshop Presentation

This is a presentation on the Geothermal Multiset Straddle (GMS) for High Temperature Applications by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of (1) an annular multiset isolation system; (2) a stimulation straddle isolation system; and (3) a multi open-close flow system, for geothermal environments. This is to enable effective zonal isolation and stimulation with multiset capabilities, to implement downhole controlled EGS in any location, and to extend the productive life of the well. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Intermetallic PtCo Catalysts with Enhanced Performance and Stability [Slides]

Pt-based catalysts need systematic modifications to be adapted to different applications (LDV or HDV). L1 0 -CoPt particles have been demonstrated as highly active and durable cathode materials for fuel cells. Colloidal synthesis can generate catalysts with highly uniform particles size but the removal of surfactants is challenging. Acid leaching warrants a Pt shell with certain thickness, which mitigates the Co leaching. Controlling the size of L1 0 -CoPt particles is a robust method to alter their catalytic behaviours and tailor the function of catalysts. Modifying the carbon features (e.g. porosity and graphitization) is an effective method to regulate the performance and stability of catalysts to adapt the catalysts to different applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Materials in Extremes [Slides]

Goals: Realization of advanced predictive models that capture aspects of processing structure-properties-performance (PSPP) in ways that build on scale bridging, data science, and transformational physics insights from experiments; Based on a robust and seamless integration of sample manufacturing, characterization (pre- and post-mortem), theory and simulation, and novel experiments; Ultimately we want to be able to reliably predict performance, and control the functionality of materials in extreme environments.

36 MATERIALS SCIENCE↗