Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “site location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Area South of K7-516, SWMU 100 Operations, Maintenance, and Monitoring Report Kennedy Space Center, Florida

This Operations, Maintenance, and Monitoring Report documents groundwater interim measure activities from March 30, 2019 through December 31, 2019 at the Area South of K7-516 site located at Kennedy Space Center (KSC), Florida. An air sparge (AS) system consisting of 16 AS wells was installed along the Barge Canal in 2012 to be protective of the Outstanding Florida Waters (OFW). The AS system was expanded in 2015 by installing 40 AS wells to remediate the hot spot (HS) area. Additional expansion activities were performed in 2018 through the installation of eight additional AS wells along the Barge Canal. Currently 24 OFW and 40 HS AS wells are in operation. This report includes performance monitoring events for the OFW and HS areas, along with an annual Interim Groundwater Monitoring (IGWM) event in the Western Area. The 516S site has been designated Solid Waste Management Unit 100 under KSC’s Resource Conservation and Recovery Act Corrective Action program. This document was prepared by Tetra Tech, Inc., for the National Aeronautics and Space Administration under Indefinite Delivery Indefinite Quantity Contract 80KSC019D0011/80KSC019F0068. The OFW and HS AS systems are meeting the performance criteria and IM objectives of preventing contaminant migration and remediating groundwater within the treatment zone. Team consensus was reached to continue operation of the combined OFW and HS AS systems (Meeting Minute 2002-M02, Decisions 2002-D06, D09 and D04). Team consensus was also reached to continue semi-annual OFW performance monitoring and annual monitoring for the IGWM Western Area for the same wells sampled during 2019 events. In the eastern area, MW13, MW14, and MW15 will be reduced from semi-annual to annual frequency. For the HS Area, team consensus was reached to continue the current annual/biennial monitoring program (Meeting Minute 2002-M02, Decisions 2002-D02, D03, D05, D07 and D08).

Patrice L. Lehocky↗
NASA NTRSDate not supplied

Estimating Future Changes of Energy Demand for Heating and Cooling Buildings at NASA Centers GC23J-1198

With its unique and trusted earth observations, NASA is a critical source in informing decisions that will help achieve the U.S. goal of Net-Zero Greenhouse Gas (GHG) Emissions by 2050. NASA’s Prediction of Worldwide Energy Resource (POWER) project facilitates the use of NASA Earth Science data holdings within the energy, agricultural, and building heating/cooling design industries. POWER packages solar and meteorological data from several NASA projects in a user friendly GIS-enabled web services system (https://power.larc.nasa.gov). As part of the development of new data products to support the energy and building heating/cooling design communities, we estimate the changes in energy required to heat and cool buildings in the future climate at 14 different NASA site locations spread throughout the continental United States, as projected by CMIP6 climate models under different emissions scenarios. Bias-corrected downscaled time series of meteorological variables are taken from NASA Earth Exchange (NEX) Global Daily Downscaled Projections (GDDP-CMIP6) downscaled climate model data. The spread between the different model projections is accounted for by analyzing both the ensemble average of 22 CMIP6 models and 6 representative models with different climate sensitivities and different interannual variability. Changes in energy use are estimated in two ways. First, changes in the total annual heating and cooling degree days (HDD and CDD, respectively) are calculated relative to the current climate. This is done at all 14 sites. Second, the downscaled time series are used as inputs into RETScreen(R), a clean energy management decision tool, to give an estimate of heating/cooling energy use for a typical office building. We use this estimation method with model data at Langley Research Center. In the next 50 years, the annual total of HDD (CDD) is projected to decrease by 8-38% (increase by 5-28%) at all sites, with the increase in CDD typically a larger magnitude the decrease in HDD. For a typical small office building at Langley Research Center, the amount of energy needed to cool increases by 33-54% and the amount of energy to heat decreases by 29-40%. POWER is working to develop long term climate data services based on these results to include in future data products to provide to users.

Bradley M. Hegyi↗
DOE OSTI2023

Recent streamflow trends across permafrost basins of North America: Datasets

Climate change impacts, including changing temperatures, precipitation, and vegetation, are widely anticipated to cause major shifts to the permafrost with resulting impacts to hydro-ecosystems across the high latitudes of the globe. However, it is challenging to examine streamflow shifts in these regions owing to a paucity of data, discontinuity of records, and other issues related to data consistency and accuracy. We looked at recent changes in streamflow over 1976-2021 in watersheds affected by varying degrees of permafrost coverage to characterize trends and drivers for a range of watersheds across North America. Data sets are described in detail in the paper associated with this data set, Bennett et al. 2023, Front. Water - Water and Critical Zone, DOI: 10.3389/frwa.2023.1099660.These data contain CSV files of the streamflow, climate, and land surface characteristics for several sites located across the high latitude regions of North America. Both observed and reanalysis data products are provided. These files can be opened using Excel or a text editor, or they can be read, and analyzed in software tools such as Python or R. A brief description of the files is below, and more details can be found in the Methods section.rabpro_stats_north_select_74_55m.csv - This file describes the observed gages used in the analysis.GF31_23_metadat.csv - This file describes the 23 permafrost systems. Columns are as described in rabpro_stats_north_select_74_55m.csv above, with rabpro_id, the id used for the timeseries file mapping in GF31_23_time_series.csv.GF31_23_time_series.csv - This file contains the time series data for the stations described in GF31_23_metadat.csv.GF31_random_reaches_1583.csv - This file describes the 1583 randomly selected permafrost-dominant sites for machine learning analysis.era5_GF31_monthly_vars_random_reaches_1583.csv - This file contains the monthly ERA5 land data for the 1583 randomly selected permafrost-dominant sites.observed.zip: USGS and Hydat station data for the 74 gages analyzed in this study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1975-2022.streamflow_daily_GF31_infilled_1979_2022.csv - infilled daily streamflow data (infilled using GloFAS v 3.1) for 55 gages. Units are m3/sec. 1979-2022.glofas_23.zip - Glofas v3.1 file for the 23 permafrost-dominant gages in the study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1979-2021.glofas_1583.zip - Glofas v3.1 file for the 1583 randomly selected permafrost-dominant gages in the study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1979-2021.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2008

Laboratory and Airborne BRDF Analysis of Vegetation Leaves and Soil Samples

Laboratory-based Bidirectional Reflectance Distribution Function (BRDF) analysis of vegetation leaves, soil, and leaf litter samples is presented. The leaf litter and soil samples, numbered 1 and 2, were obtained from a site located in the savanna biome of South Africa (Skukuza: 25.0degS, 31.5degE). A third soil sample, number 3, was obtained from Etosha Pan, Namibia (19.20degS, 15.93degE, alt. 1100 m). In addition, BRDF of local fresh and dry leaves from tulip tree (Liriodendron tulipifera) and acacia tree (Acacia greggii) were studied. It is shown how the BRDF depends on the incident and scatter angles, sample size (i.e. crushed versus whole leaf,) soil samples fraction size, sample status (i.e. fresh versus dry leaves), vegetation species (poplar versus acacia), and vegetation s biochemical composition. As a demonstration of the application of the results of this study, airborne BRDF measurements acquired with NASA's Cloud Absorption Radiometer (CAR) over the same general site where the soil and leaf litter samples were obtained are compared to the laboratory results. Good agreement between laboratory and airborne measured BRDF is reported.

Georgiev, Georgi T.↗
NASA NTRS1980

Generalized shading analysis for paraboloidal collector fields

This paper presents the development and results of a generalized shading analysis for a field of point-focus parabolic dish concentrators. Shading of one concentrator by another with attendant loss of energy is a function of the position of the sun and the relative locations of the concentrators within the field. A method is presented for determining the annualized energy loss which includes a trade-off of system life-cycle energy as a function of concentrator spacing and field geometric layout. System energy output is computed on an annualized basis, employing 15 minute-increment environmental data tapes for the year 1976 at Barstow, California. For a land cost of $5000 per acre, lowest system energy cost occurs at about a 25 percent packing fraction (concentrator area/land area) for a typical 1-MWe dish-Stirling solar thermal power plant. Basic equations are given for computing the shading and concomitant energy loss as a function of concentrator center-to-center spacing, field layout site location.

Osborn, D. B.↗
DOE OSTI2021

SPRUCE Diurnal and Seasonal Patterns of Water Potential in S1 Bog and SPRUCE Experimental Plot Vegetation beginning in 2010

This data set reports on water potential from excised terminal shoots or leaves (Mainthemum only) of vegetation at the SPRUCE site located in the S1 bog. Pretreatment measurements were collected from outside plots within the S1 bog. Post treatments were collected from inside SPRUCE plots. Water potential was measured on the overstory canopy species, consisting of the evergreen Picea mariana (Mill.) B.S.P. (black spruce) and deciduous Larix laricina (Du Roi) K. Koch (tamarack) trees, and ericaceous shrubs < 1 m tall, consisting of the evergreen Rhododendron groenlandicum (Oeder) Kron & Judd (Labrador tea) and Chamaedaphne calyculata (L.) Moench. (leatherleaf). Some measurement campaigns also included the evergreen Kalmia polifolia, Wangenh. (bog laurel), the deciduous Vaccinium angustifolium (Aiton) (blueberry), and the herbaceous Maianthemum trifolium (L.) Sloboda (three-leaf false Solomon’s seal). This dataset contains one data file in comma-separated (*.csv) format. This is the second release of water potential data from the site with additional data from 2018 and 2019. These data cover 2010-06-22 to 2019-07-16. Further results will be added to this data set and released to the public periodically as quality assurance and publication of results are accomplished. There are 10 experimental plots in SPRUCE: five temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same five temperature treatments at elevated CO2 (+500 ppm). These data span the pre- and post-treatment periods when enclosed plots were exposed to warming and elevated carbon dioxide (CO2) within the SPRUCE experiment. The pretreatment samples were collected from south end of the S1 bog prior to SPRUCE boardwalk construction, then throughout the bog once the boardwalks were completed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

TCL3 UTM (UAS Traffic Management) Flight Tests, Airspace Operations Laboratory (AOL) Report

The Technology Capability Level-3 (TCL3) flight tests were conducted at six different test sites located across the USA from March to May of 2018. The campaign resulted in over 830 data collection flights using 28 different aircraft and involving 20 flight crews. Flights not only varied in duration, but also in the environments and terrains over which they flew. The TCL3 tests highlighted four different types of tests: three tests focused on Communication, Navigation and Surveillance (CNS); six tests focused on Sense and Avoid (SAA) technologies; six tests focused on USS Data and Information Exchange (DAT); and five tests focused on exploring fundamental Concepts of the project (CON). This document presents data collected during the TCL3 tests that informed the operator’s experiences—the quality of the unmanned aerial system (UAS) Service Supplier (USS) information that the operator was provided with, the usefulness of this information, and the usability of the automation, both while airborne and on the ground. It is intended to complement the reports written by the test sites and the quantitative reports and presentations of the UAS Traffic Management (UTM) project. With the goal of instructing what the minimum information requirements and/or best practices might be in TCL3 operations, the driving enquiry was: How do you get the information you need, when you need it, to successfully fly a UAS in UTM airspace? This enquiry touches on two requirements for displays, which are to provide adequate situation awareness (SA) and to share information through a USS. The six test sites participating in the TCL3 tests flew a subset of the 20 tests (outlined above), with most sites working on a subset of each of the four types: Communications, Navigation and Surveillance (CNS); DAT; CON; and Sense and Avoid (SAA). The, mainly qualitative, data addressed in this report was collected by the AOL (Airspace Operations Laboratory) both on-site and remotely for each test. The data consists of the contents of end-of-day debriefs, end-of-day surveys, observer notes, and flight test information, all submitted as part of the Data Management Plan (DMP).

Martin, Lynne↗
NASA NTRS2019

Uncertainty in Soil Moisture Retrievals: an Ensemble Approach Using SMOS L-Band Microwave Data

The uncertainty of soil moisture (SM) retrievals from satellite brightness temperature (TB) observations depends primarily on the choice of radiative transfer model (RTM) parameters, prior SM information and TB inputs. This paper studies the sensitivity of several (quasi-)operational and experimental SM retrieval products from the Soil Moisture Ocean Salinity (SMOS) mission to these choices at 11 reference sites, located in 7 watersheds across the United States (US). Different literature-based RTM parameter sets cause large biases between retrievals. Whereas typical RTM parameter sets are calibrated for SM retrievals, it is shown that a parameter set carefully optimized for TB forward modeling can also be used for retrieving SM. It is also shown that the inclusion of dynamic prior SM estimates in a Bayesian retrieval scheme can strongly improve SM retrievals, regardless of the choice of RTM parameters, and that the use of multi-angular and multi-polarization TB does not necessarily lead to superior retrievals compared to retrievals based on TB data at a single incidence angle and polarization. The second part of this paper evaluates ensemble uncertainty metrics for SM retrievals obtained by propagating a wide range of RTM parameters through the RTM. As expected for bounded variables, the spread in the ensemble SM retrievals is smallest for wet and dry SM values and highest for intermediate SM values. After removal of the strong long-term mean bias associated with the RTM parameter values for individual ensemble members, the remaining anomaly ensemble SM spread of 0.037 cu m/cu m approximates the actual time series unbiased root-mean-square-difference of 0.042 cu m/cu m between ensemble mean retrievals and in situ reference data across the reference sites. However, the temporal variability in the anomaly ensemble spread reveals higher-order biases in the retrieval error, which should be accounted for when characterizing retrieval error.

Jan Quets↗
DOE OSTI2022

Separation of CO 2 from Flue Gas and Potential for Geologic Sequestration

The objectives of this study were to review various methods reported in the literature for the separation and geologic sequestration of carbon dioxide and evaluate the potential of TVA fossil fuel-burning plant locations for onsite geologic sequestration of CO 2 from stack emissions. Several conventional and nonconventional technologies for the separation of CO 2 from flue gas, including absorption, adsorption, cryogenic distillation, membranes, hydrate formation and dissociation, and ammonia carbonation, have been reviewed in terms of separation mechanisms, flow diagrams, and costs. Most of the technologies that have been reviewed are still at the research and development stage. Critical information needed to assess and compare these technologies is still lacking. In addition, information on some of the technologies that have been tested at a pilot or industrial scale has not been fully disclosed in the open literature. Because of this lack of data, it is difficult to make a critical assessment of each of the separation technologies. Based on limited information, it was concluded that the most promising methods are membrane separation and the Mitsubishi process for chemical absorption. Both processes involve separating CO 2 at high temperature, minimizing the cost for cooling prior to separation. Physical and chemical geologic formations of CO 2 were also reviewed. It was concluded that due to the geologic time scale of CO 2 sequestration periods, relatively safe conditions, general proximity to CO 2 sources, and extensive knowledge of underground conditions, sequestration of CO 2 in underground aquifers and coal beds is a very promising method of mitigating greenhouse gas emissions. The cost is predicted to be relatively low and the suitable sites are numerous for this application, with many of these sites located close to the plants.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS2014

Current Ground Test Options for Nuclear Thermal Propulsion (NTP)

About 20 different NTP engines/ reactors were tested from 1959 to 1972 as part of the Rover and Nuclear Engine for Rocket Vehicle Application (NERVA) program. Most were tested in open air at test cell A or test cell C, at the Nevada Test Site (NTS). Even after serious engine breakdowns of the reactor (e.g., Phoebus 1A), the test cells were cleaned up for other engine tests. The engine test stand (ETS) was made for high altitude (approximately 1 psia) testing of an NTP engine with a flight configuration, but still had the exhaust released to open air. The Rover/NERVA program became aware of new environmental regulations which would prohibit the release of any significant quantity of radioactive particulates and noble gases into the open air. The nuclear furnace (NF-1) was the last reactor tested before the program was cancelled in 1973, but successfully demonstrated a scrubber concept on how to filter the NTP exhaust. The NF-1 was demonstrated in the summer of 1972. The NF-1 used a 44MW reactor and operated each run for approximately 90 minutes. The system cooled the hot hydrogen exhaust from the engine with a water spray before entering a particle filter. The exhaust then passed through a series of heat exchangers and water separators to help remove water from the exhaust and further reduce the exhaust temperatures. The exhaust was next prepared for the charcoal trap by passing through a dryer and effluent cooler to bring exhaust temperatures close to liquid nitrogen. At those low temperatures, most of the noble gases (e.g., Xe and Kr made from fission products) get captured in the charcoal trap. The filtered hydrogen is finally passed through a flare stack and released to the air. The concept was overall successful but did show a La plating on some surfaces and had multiple recommendations for improvement. The most recent detailed study on the NTP scrubber concept was performed by the ARES Corporation in 2006. The concept is based on a 50,000 lbf thrust engine (approximately 1 GW) with a maximum burn time of 1 hour. The concept utilized lessons learned from NF-1. The strategy breaks down the exhaust into parallel paths to allow flexibility with engine size and mass flow of exhaust. Similar to NF-1, the exhaust is slowed down, cooled, filtered of particulates, filtered of noble gases, and then the clean hydrogen is flared to open air. Another concept proposed by Steve Howe (currently Director of the Center for Space Nuclear Research) to simplify the NTP exhaust filtering is to run the hydrogen exhaust into boreholes underground to filter the exhaust. The two borehole site locations proposed are at the NTS and at the Idaho National Laboratory (INL). At NTS, the boreholes are 8' diameter and 1200' deep. The permeability of hydrogen through the soil and its buoyancy will allow it to rise up through the soil and allow the filtering of noble gases and radioactive particulates. The exhaust needs to be cooled to 600C before entering the borehole to avoid soil glazing. Preliminary analysis shows a small buildup of back pressure with time which depends on permeability. Noble gases entering the borehole walls deep can take a long time before reaching the surface. Other factors affecting permeability include borehole pressure, water saturation, and turbulence. Also, a possible need to pump out contaminated water collected at the bottom of the borehole. At INL, the borehole concept is slightly different. The underground borehole has openings to the soil at special depths which have impermeable interbeds above the water table and below the surface to allow the exhaust to travel horizontal between the impermeable layers. Preliminary results indicate better permeability than at NTS. The last option is total containment of the exhaust during the test run. The concept involves slowing down the flow to subsonic in a water cooled diffuser. The hydrogen is burned off in an oxygen rich afterburner with the only products being steam, oxygen, and some noble gases. A heat exchanger and water spray pulls heat from the steam and lowers the temperature for condensation. The optimum ratio between the two is being investigated, with a goal to minimize the total volume of the water hold tanks. A water tank farm collects the contaminated water. The amount of water produced from burning the hydrogen is approximately 100,000 gallons (not including cooling water) for a 25k lbf engine operating for 50 minutes. Residual gases (e.g., oxygen and some noble gases) can be captured at cryogenic levels with a liquid nitrogen cooled dewar. After a few weeks post-test, the radiation levels can drop to more favorable levels before slowly draining each capture tank and using existing filters. With today's environmental regulations, the NTP exhaust is filtered to meet 10 mrem/year exposure to the general public (at a DOE site) or 100 mrem/year (via NRC when tested elsewhere), when natural background radiation exposure to the general public is 300- 600 mrem per year. The current society feels more comfortable with filtering even lower to as low as reasonably achievable (ALARA).

Gerrish, Harold P., Jr.↗
DOE OSTI2021

Trade-offs of forest management scenarios on forest carbon exchange and threatened and endangered species habitat

Management of forest lands under climate warming poses challenges to managers, some of which are difficult to predict. Examining the trade-offs associated with forest stewardship choices is essential to avoid consequences with loss of natural capital. We utilized LANDIS-II process model simulations for three forested sites located in disparate parts of the United States with the purpose of understanding the trade-offs imposed by management choices under climate warming and associated wildfire. There were only small trade-offs that emerged from the simulations, between habitat area for threatened and endangered species (TES), net ecosystem exchange for CO2 (NEE), and risk of wildfire. Stand management in the form of thinning and prescribed burning typically increased NEE while simultaneously increasing habitat for TES, while reducing the risk of wildfire. These benefits were also observed under a climate warming scenario; however, the benefits were greatly outweighed by the negative impacts f warming on both TES habitat and NEE. Balancing these ecosystem services via thinning and burning treatments is a strategic approach to mitigate risks of wildfire both currently and under a warming future climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Relationship between isotope ratios in precipitation and stream water across watersheds of the National Ecological Observation Network

The timescales associated with precipitation moving through watersheds reveal processes that are critical to understanding many hydrologic systems. Measurements of environmental stable water isotope ratios (δ 2 H and δ 18 O) have been used as tracers to study hydrologic timescales by examining how long it takes for incoming precipitation tracers become stream discharge, yet limited measurements both spatially and temporally have bounded macroscale evaluations so far. Here in this observation driven study across North American biomes within the National Ecological Observation Network (NEON), we examined δ 18 O and δ 2 H stable water isotope in precipitation (δP) and stream water (δQ) at 26 co-located sites. With an average 54 precipitation samples and 139 stream water samples per site collected over 2014–2022, assessment of local meteoric water lines and local stream water lines showed geographic variation across North America. Taking the ratio of estimated seasonal amplitudes of δP and δQ to calculate young water fractions (F yw ), showed a Fyw range from 1% to 93% with most sites having F yw below 20%. Calculate d mean transit times (MTT) based on a gamma convolution model showed a MTT range from 0.10 to 13.2 years, with half of the sites having MTT estimates lower than 2 years. Significant correlations were found between the F yw and watershed area, longest flow length, and the longest flow length/slope. Significant correlations were found between MTT and site latitude, longitude, slope, clay fraction, temperature, precipitation magnitude, and precipitation frequency. The significant correlations between water timescale metrics and the environmental characteristics we report share some similarities with those reported in prior studies, demonstrating that these quantities are primarily driven by site or area specific factors. The analysis of isotope data presented here provides important constraints on isotope variation in North American biomes and the timescales of water movement through NEON study sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Anthromes and forest carbon responses to global change

Human effects on ecosystems date back thousands of years, and anthropogenic biomes—anthromes—broadly incorporate the effects of human population density and land use on ecosystems. Forests are integral to the global carbon cycle, containing large biomass carbon stocks, yet their responses to land use and climate change are uncertain but critical to informing climate change mitigation strategies, ecosystem management, and Earth system modeling. Using an anthromes perspective and the site locations from the Global Forest Carbon (ForC) Database, we compare intensively used, cultured, and wildland forest lands in tropical and extratropical regions. We summarize recent past (1900-present) patterns of land use intensification, and we use a feedback analysis of Earth system models from the Coupled Model Intercomparison Project Phase 6 to estimate the sensitivity of forest carbon stocks to CO 2 and temperature change for different anthromes among regions. Modeled global forest carbon stock responses are positive for CO 2 increase but neutral to negative for temperature increase. Across anthromes (intensively used, cultured, and wildland forest areas), modeled forest carbon stock responses of temperate and boreal forests are less variable than those of tropical forests. Tropical wildland forest areas appear especially sensitive to CO 2 and temperature change, with the negative temperature response highlighting the potential vulnerability of the globally significant carbon stock in tropical forests. The net effect of anthropogenic activities—including land-use intensification and environmental change and their interactions with natural forest dynamics—will shape future forest carbon stock changes. These interactive effects will likely be strongest in tropical wildlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Elucidating the Role of Hydrogen at c‐In 2 O 3 /a‐In 2 O 3− x Interface

Ab initio molecular dynamics simulations and hybrid functional electronic structure calculations are employed to determine the formation, the structural and electronic properties, and the dynamics of covalent (In—OH) and ionic (In—H—In) hydrogen defects at crystalline-In 2 O 3 /amorphous-In 2 O 3−x interface. This comprehensive computational study considers (i) various interstitial and substitutional hydrogen site locations within the crystalline, amorphous, and interfacial regions; (ii) several oxygen-to-hydrogen ratios; and (iii) possible defect charged states. The results reveal hydrogen's inability to fully passivate the undercoordinated under-shared in atoms in amorphous highly substoichiometric oxide, giving rise to the formation of deep electron traps even in net-charge neutral structures. These trap defects are found to be sensitive to photoexcitation, in contrast to In—OH with H's electronic states located below the valence band and to In—H—In, where H is found to maintain its charge state upon illumination. Nevertheless, H plays a critical role in photoinduced conductivity and its relaxation by promoting In—O coordination transformations at the interfacial region, including deterioration of the crystalline layer. Finally, the results help identify mobile H species and metastable H defect complexes (such as In—H—H—In, In—OH–H—In, and In—OH–O—In) that are responsible for long relaxation times of the conductivity decay.

H defects↗
DOE OSTI2024

Evaluation of a practical approach for field scale moisture flow modeling in heterogeneous media at a semiarid site

Abstract A practical approach for modeling field‐scale moisture flow in a highly heterogeneous unsaturated medium is described in this study. The validity of this approach is demonstrated through comparison of the numerical simulations with field observations at a semiarid site located in southcentral Washington State. The methodology is based on upscaling the core scale hydraulic properties and combining power‐law and tensorial connectivity‐tortuosity (PA‐TCT) approaches to derive macroscopic anisotropy parameters for each hydrostratigraphic unit (HSU) identified in the field. Each heterogeneous HSU is approximated by an equivalent homogeneous medium (EHM) model for which PA‐TCT parameters are used in the flow simulations. The available field data on moisture content and matric potential are compared with steady‐state flow simulations based on the mean form of Richards' equation. While the homogenization or averaging of heterogeneities, embedded in the EHM modeling approximation, cannot capture all of the field‐scale variability, the simulated steady‐state moisture and matric potential profiles capture well the central tendency of the field data. This approach is deemed practical for assessing the fate and transport of contaminants in highly heterogeneous unsaturated media at the transport scale of hundreds of meters.

Khaleel, Raziuddin↗
DOE OSTI2022

Statistical framework to assess long-term spatio-temporal climate changes: East River mountainous watershed case study

Abstract Evaluation of long-term temporal and spatial climatic change in mountainous regions is a critical challenge because of the interactive effects of multiple land and climatic factors and processes. Here we present the application of the statistical framework to the assessment of changes of climatic conditions, using data from 17 meteorological stations across the East River watershed near Crested Butte, Colorado, USA, and spanning the period from 1966 to 2021. The framework is developed based on (1) a time-series analysis of daily, monthly, and yearly averaged meteorological parameters (temperature, relative humidity, precipitation, wind speed, etc.), (2) evaluation and time series analysis of potential evapotranspiration (ET o ), actual evapotranspiration (ET), aridity index (AI), standard precipitation index (SPI) and standard precipitation-evapotranspiration index (SPEI), and (3) a temporal-spatial climatic zonation of the studied area based on the hierarchical clustering and PCA analysis of the SPEI, because the SPEI can be considered an integrative characteristic of the changes of climatic conditions. The Budyko model, with the application of the Penman–Monteith equation for the estimation of ET o , was used to determine the ET. The time series analysis of the AI is used to identify the periods with energy limited and water limited conditions. Hierarchical clustering of site locations for the three temporal segments of the SPEI showed a significant temporal-spatial shifts, indicating that dynamic climatic processes drive zonation patterns. Therefore, the watershed climatic zonation requires periodic re-evaluation based on the structural time series analysis of meteorological and water balance data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Modeling receptor flexibility in the structure-based design of KRAS G12C inhibitors

KRAS has long been referred to as an ‘undruggable’ target due to its high affinity for its cognate ligands (GDP and GTP) and its lack of readily exploited allosteric binding pockets. Recent progress in the development of covalent inhibitors of KRAS G12C has revealed that occupancy of an allosteric binding site located between the α3-helix and switch-II loop of KRAS G12C —sometimes referred to as the ‘switch-II pocket’—holds great potential in the design of direct inhibitors of KRAS G12C . In studying diverse switch-II pocket binders during the development of sotorasib (AMG 510), the first FDA-approved inhibitor of KRAS G12C , we found the dramatic conformational flexibility of the switch-II pocket posing significant challenges toward the structure-based design of inhibitors. Here, we present our computational approaches for dealing with receptor flexibility in the prediction of ligand binding pose and binding affinity. For binding pose prediction, we modified the covalent docking program CovDock to allow for protein conformational mobility. This new docking approach, termed as FlexCovDock, improves success rates from 55 to 89% for binding pose prediction on a dataset of 10 cross-docking cases and has been prospectively validated across diverse ligand chemotypes. For binding affinity prediction, we found standard free energy perturbation (FEP) methods could not adequately handle the significant conformational change of the switch-II loop. We developed a new computational strategy to accelerate conformational transitions through the use of targeted protein mutations. Using this methodology, the mean unsigned error (MUE) of binding affinity prediction were reduced from 1.44 to 0.89 kcal/mol on a set of 14 compounds. These approaches were of significant use in facilitating the structure-based design of KRAS G12C inhibitors and are anticipated to be of further use in the design of covalent (and noncovalent) inhibitors of other conformationally labile protein targets.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Unsupervised Azimuth Estimation of Solar Arrays in Low-Resolution Satellite Imagery through Semantic Segmentation and Hough Transform

This paper explains the use of a convolutional neural network (CNN) to segment solar panels in a satellite image containing solar arrays, and extract associated metadata from the arrays. A novel unsupervised technique is introduced to estimate the azimuth of each individual solar panel from the predicted mask of the convolutional neural network. This pipeline was developed with the aim of extracting necessary metadata for a solar installation, using only a set of latitude–longitude coordinates. Azimuth prediction results for 669 individual solar installations associated with 387 sites located across the United States are provided. A mean average error and median average error of 21.65 degrees and 1.0 degrees were obtained, respectively, when predicting the azimuth of the solar fleet data set, with about 80% of the results within an error of zero degrees of the ground truth azimuth value and about 85% within an error of 25 degrees. The predicted azimuth was then used to estimate the energy conversion of the solar arrays. Results show a 90.9 and 90.6 R-squared value for estimating alternating current (AC) and direct current (DC) energy, respectively, and a mean absolute percentage error (MAPE) of 1.70% in estimating the alternating current (AC) energy using the fully automated algorithm.

14 SOLAR ENERGY↗