Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Cooling histories of lunar rocks based on opaque mineral geothermometers

The application of experimentally derived data on (1) the Zr partitioning between coexisting ilmenite and ulvospinel and (2) the Ti partitioning between coexisting troilite and ilmenite has allowed the discernment of differences in subsolidus cooling histories of lunar rocks - e.g., the Apollo 15 Type I Mare basalts. The rocks which show Zr partitionings reequilibrated to lower temperature (i.e., below 950 C), as a result of slow cooling, also show evidence for subsolidus reduction of ulvospinel to ilmenite + native Fe. It is suggested that the presence of ulvospinel reduction is not evidence a priori that these rocks have undergone more reducing conditions than the other Apollo 15 Mare basalts; it may only indicate that the cooling rates were slower in that subsolidus temperature range (i.e., much less than 900 C) where oxygen fugacity values were favorable for ulvospinel reduction. The rocks with higher temperature Zr partitionings and no ulvospinel reduction may have cooled under the same fugacity conditions but at a faster rate.

Taylor, L. A.↗
NASA NTRS1973

Elastic wave velocities of Apollo 14, 15, and 16 rocks

Elastic wave velocities of two Apollo 14 rocks, 14053 and 14321, three Apollo 15 rocks, 15058, 15415, and 15545, and one Apollo 16 rock 60315 have been determined at pressures up to 10 kb. For sample 14321, the variation of the compressional wave velocities with temperature has been measured over the temperature range from 27 to 200 C. Overall elastic properties of these samples except sample 15415 are very similar to those of Apollo 11, 12, and 14 rocks and are concordant with Toksoz et al.'s (1972) interpretation that lunar upper crust is of basaltic composition. Temperature derivative of the P wave velocity for sample 14321 is a half to one order of magnitude larger than that for single crystalline minerals. This suggests that the seismic velocity in the lunar crust may be affected significantly by the temperature distribution.

Mizutani, H.↗
NASA NTRS1973

Crater populations on lunar rocks

Approximately 10,000 microcraters were investigated using binocular microscope techniques on fifteen Apollo 16 rocks: crystalline rocks 60315, 60335, 61156, 62235, 62295, and 68415; breccias 60016, 61015, 61175, 66075, and 69935; and glass surfaces 60015, 60095, 60135, and 64455. Diameter measurements of the central glass-lined pits and surrounding spall zones were made. Ratios of spall to pit diameters may range from 3.0 to 4.5 for different rock surfaces. Crater size distributions obtained for production surfaces confirm and extend to larger crater sizes data published previously. The crater size distribution on lunar rocks in the pit diameter range, 10 to 1000 microns, is shown to depend on the average angle of impact which is a function of the exposure geometry. In contrast to results of earlier studies, a wide range of crater densities was observed on relatively heavily cratered surfaces.

Neukum, G.↗
NASA NTRS1974

Excess europium content in Precambrian sedimentary rocks and continental evolution

It is proposed that the europium excess in Precambrian sedimentary rocks, relative to those of younger age, is derived from volcanic rocks of ancient island arcs, which were the source materials for the sediments. Precambrian sedimentary rocks and present-day volcanic rocks of island arcs have similar REE patterns, total REE abundances, and excess Eu, relative to the North American shale composite. The present upper crustal REE pattern, as exemplified by that of sediments, is depleted in Eu, relative to chondrites. This depletion is considered to be a consequence of development of a granodioritic upper crust by partial melting in the lower crust, which selectively retains europium.

Jakes, P.↗
NASA NTRS1974

Ultra sound absorption measurements in rock samples at low temperatures

A new technique, comparable with the reverberation method in room acoustics, is described. It allows Q-measurements at rock samples of arbitrary shape in the frequency range of 50 to 600 kHz in vacuum (.1 mtorr) and at low temperatures (+20 to -180 C). The method was developed in particular to investigate rock samples under lunar conditions. Ultrasound absorption has been measured at volcanics, breccia, gabbros, feldspar and quartz of different grain size and texture yielding the following results: evacuation raises Q mainly through lowering the humidity in the rock. In a dry compact rock, the effect of evacuation is small. With decreasing temperature, Q generally increases. Between +20 and -30 C, Q does not change much. With further decrease of temperature in many cases distinct anomalies appear, where Q becomes frequency dependent.

Herminghaus, C.↗
NASA NTRS1974

Water and carbon in rusty lunar rock 66095

The reported study of the lunar rock 66095 included the determination of hydrogen, carbon, and oxygen isotope ratios. One group of experiments with rock 66095 and meteoritic rust involved the examination of the O-18 content of the oxygen in the ferric oxide found on the rock and the determination of the O-18 content in the oxygen of the adsorbed or hydration water. It is suggested that the enrichment of the rock 66095 in volatile materials is caused by volcanic or fumarolic activity. Water released by such activity may be juvenile lunar water.

Friedman, I.↗
NASA NTRS1974

Measurement of density and porosity of lunar rocks based on samples of Luna 16 automatic lunar station

Three fragments of holocrystalline igneous rocks of the gabbro type, weighing 30 to 50 mg each, were investigated. The density of the fragments was established with a mercury pycnometer and was found to be 3.05 to 3.12 g/cu cm, with a relative error not more than 2 percent. The porosity was found for the difference between the volumes determined with the mercury and with the gas techniques; for all three samples together it was 13 percent, and the error of determination was 70 percent owing to the small volumes. It can be anticipated that the porosity of the rock in bulk will be higher than the value obtained based on small fragments. The porosity of lunar rocks can markedly affect the isostatic distribution of rocks and must be taken into account when developing models of lunar structure.

Volynets, V. F.↗
NASA NTRS1974

Rock melting technology and geothermal drilling

National awareness of the potential future shortages in energy resources has heightened interest in exploration and utilization of a variety of geothermal energy (GTE) reservoirs. The status of conventional drilling of GTE wells is reviewed briefly and problem areas which lead to higher drilling costs are identified and R and D directions toward solution are suggested. In the immediate future, an expanded program of drilling in GTE formations can benefit from improvements in drilling equipment and technology normally associated with oil or gas wells. Over a longer time period, the new rock-melting drill bits being developed as a part of the Los Alamos Scientific Laboratory's Subterrene Program offer new solutions to a number of problems which frequently hamper GTE drilling, including the most basic problem - high temperature. Two of the most favorable characteristics of rock-melting penetrators are their ability to operate effectively in hot rock and produce glass linings around the hole as an integral part of the drilling process. The technical advantages to be gained by use of rock-melting penetrators are discussed in relation to the basic needs for GTE wells.

Rowley, J. C.↗
NASA NTRS1974

The dissection and consortium allocation of Apollo 17 lunar rocks from the boulder at station 7

The Apollo 17 astronauts removed four rocks samples to represent each of the lithologies they recognized in the boulder at station 7: sample 77215 from an off-white meter-sized block; sample 77075 from one of the thin dikes that cross the off-white block; 77115 from the blue-gray rock adjacent to the off-white block and apparently continuous with thin dikes that cross the block; sample 77135 of the tan-gray or green-gray vesicular rock adjacent to the blue-gray (77115) rock. A consortium of investigators has been organized to study the samples. Each sample shows a number of lithologic types in terms of clasts (or xenoliths) and matrices. A table shows how subsamples have been allocated for consortium study. Maps and photographs show the relations between subsample locations and lithologies for the two more dissected samples, 77115 and 77135.

Butler, P.↗
NASA NTRS1974

Igneous rocks from Apollo 16 rake samples

Results are reported for a study of seven holocrystalline feldspathic rocks (including a spinel troctolite and six melt rocks) and one mare basalt clast from the Apollo-16 rake samples. The composition and grain structure of each rock is described in detail. Only the spinel troctolite is considered a good candidate for a primary igneous cumulate formed during the original differentiation of the lunar crust. It is shown that the melt rocks probably resulted from shock melting followed by rapid crystallization of heterogeneous highland material and that compositional variations are probably due to mixing of various amounts of heterogeneous cumulates and KREEP components. It is suggested that the mare basalt clast may have been derived from Mare Fecunditatis, although the nearest mare to the Apollo-16 site is Nectaris.

Dowty, E.↗
NASA NTRS1974

Formational history of lunar rocks - Applications of experimental geochemistry of the opaque minerals

Experimental data on the cooling histories of lunar rocks are presented along with a descriptive mineralogy of certain opaque minerals in Apollo 17 samples. Lunar rocks having Zr partitionings of coexisting ilmenite and ulvospinel indicative of high-temperature equilibrium (above 1000 C) appear to have cooled rapidly to temperatures below 800-900 C. The Ti content of troilite coexisting with ilmenite can be used to differentiate rock fragments which are mineralogically and texturally similar. It is found that Cr and Mg partitionings between coexisting armalcolite and ilmenite vary notably between rocks so that they can be used to distinguish otherwise similar samples. The spinels are analyzed as varieties of chromian ulvospinel and titanian chromite.

Taylor, L. A.↗
NASA NTRS1974

Opaque mineralogy - Apollo 17, rock 75035

Rock 75035 is a medium-grained, holocrystalline, subophitic ilmenite basalt collected from the rim of Camelot Crater, and is believed to represent the subfloor basalts of the Taurus-Littrow valley. The rock consists of the major minerals pyroxene (45%), plagioclase (31%), and ilmenite (17%). Minor minerals include cristobalite (about 5%), troilite, native Fe, tranquillityite, baddeleyite, zirconolite, and rare ulvospinel. No olivine or armalcolite was observed in the specimen 75035,76. Mineralogically and chemically, as well as in age, this rock is similar to others collected from Camelot and other stations during the Apollo 17 mission. These rocks are almost identical to the Type B ilmenite basalts of Mare Tranquillitatis.

Meyer, H. O. A.↗
NASA NTRS1974

Beta-FeOOH, akaganeite, in lunar rocks

Experiments were conducted to determine the nature of the alteration process in lunar rocks. Mixtures of 10 wt.% Fe + 10 wt.% FeCl2 + 80 wt.% basalt (terrestrial) were pelletized and allowed to set for 48 hrs at 25 C, at 40% and at 100% relative humidity. The end products were examined by reflected-light microscopy and by X-ray diffraction. The degree of reaction appears to depend upon the amount of FeCl2, the availability of water and the Ni content of the metallic Fe. The experiments showed the extremely rapid rate at which the oxyhydration can occur in air and that the product is beta-FeOOH. The data from the FeOOH mineral in rock 66095 were compared with those obtained from synthetic beta-FeOOH and found to be identical. The 'rust' in the Apollo 16 rocks could result from oxyhydration of the samples, caused by water vapor contamination, all or part of which occurred in the Apollo spacecraft and/or upon return to earth. The akageneite (beta-FeOOH) in lunar rocks could be entirely of terrestrial origin as originally suggested by Taylor et al. (1973).

Taylor, L. A.↗
NASA NTRS1974

The contamination of lunar highland rocks by KREEP - Interpretation by mixing models

A mixing model method was used to determine the component abundance in the Apollo 16 and 17 soils. This method uses the chemical composition of the soils for up to 30 elements and a weighted least-squares mixing model technique. Elements included in the calculations are: Si, Ti, Al, Ca, Fe, Mg, P, Cr, Mn, Na, K, Rb, Ba, U, Th, La, Ce, Sm, Eu, Sr, Yb, Y, Sc, V, Zr, Nb, Co, Ni, Li, Au, and Ir. The method was used to examine the possibility that some of the highland rocks such as VHA and low-K Fra Mauro basalt are mixtures. The results of the mixing model calculations show that it is possible that these rocks are mixtures of KREEP, troctolite, 'anorthosites', and a meteoritic component. The Rb-Sr systematics are consistent with such a model for the genesis of the highland rocks. KREEP has high relative concentrations of Rb, U, and radiogenic Sr and Pb and its model age of about 4.4 AE dominates the model age of all the 'contaminated' highland rocks.

Schonfeld, E.↗
NASA NTRS1974

Micrometeoroid abrasion of lunar rocks - A Monte Carlo simulation

A Monte Carlo computer model simulating the randomness of the impact process both in space and in time is developed in order to provide insight into lunar rock erosion by single particle abrasion and into bombardment history of fractional surface areas of lunar rocks. Microcrater frequencies derived from lunar rocks are used to calculate magnitude and probability of each cratering event, and experimental cratering results are employed to determine the eroded volumina for individual crater sizes. It is shown that a fractional surface area of a lunar rock sample may have a completely different bombardment history, and that the exposure histories and actual erosion depths of the surfaces vary accordingly and are highly heterogeneous. A minimum erosion rate of 0.3 to 0.6 mm for the past one million years is obtained.

Hoerz, F.↗
NASA NTRS1975

Rocks 60618 and 65785 - Evidence for admixture of KREEP in lunar impact melts

We present evidence to support the hypothesis that the fine-grained, basaltic-textured portions of rocks 60618 and 65785 were produced by impact melting of the coarse-grained spinel-olivine anorthosite (60618) and spinel troctolite (65785) portions, coupled with admixture of approximately 33% and 63%, respectively, material of alkalic high-alumina basalt (KREEP) composition. The abundance of impact-modified rocks at the Apollo 16 site with compositional similarities to the impact melts reported here, suggests that the relations observed in these rocks are indicative of widespread impact mixing with KREEP in rocks of the lunar highlands.

Keil, K.↗
NASA NTRS1976

Textural remanence - A new model of lunar rock magnetism

In reexamining the accumulated magnetic data on lunar rocks, several common patterns of magnetic behavior are recognized. Their joint occurrence strongly suggests a new model of lunar rock magnetism, which is based on partial preferred textural alignment of the spontaneous moments of magnetic grains without requiring the existence of ancient lunar magnetic fields. This magnetic fabric, mimetic to locally oriented petrofabric, gives rise to an apparent 'textural remanent magnetization'. In order to account for the observed intensity of 'stable remanence' in lunar rocks, only a minute fraction (0.001 to 0.00001) of the single-domain iron grains present need be preferentially aligned. Several mechanisms operating on the lunar surface, including shock and diurnal thermal cycling, appear adequate for producing the required type and degree of magnetic alignment in all lunar rock classes. The model is supported by a wide variety of direct and indirect evidence, and its predictions (e.g., regarding anisotropic susceptibility and remanence acquisition) can be experimentally tested.

Brecher, A.↗
NASA NTRS1976

Atmospheric rare gases in lunar rock 60015

Aliquots of lunar rock 60015 were subjected to various types of exposure and handling designed to produce terrestrial contamination, in order to test the possibility of a terrestrial origin for the terrestrial-like trapped Xe reported for lunar rock samples. Crushing the rock produced up to order-of-magnitude increases in the abundances of Ar, Kr, and Xe relative to the millimeter-sized chips of 60015 previously analyzed. Contrary to expectations for atmospheric contamination, high temperatures (above 1000 C) were necessary to remove about 75% of the trapped Kr and Xe, and the rare-gas elemental abundance ratios differed from those in terrestrial samples believed to have occluded atmospheric gases. It is concluded, on the basis of similar temperature-release profiles and elemental-fractionation patterns, that the trapped Xe observed in all these 60015 analyses is atmospheric contamination. Such a conclusion cannot unequivocally be drawn for other lunar rocks containing terrestrial-like Xe, but the present results demonstrate that arguments based on high extraction temperatures and elemental abundance ratios cannot be useful to rule out rare-gas atmospheric contamination in such samples.

Niemeyer, S.↗