Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ring model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Compare low-gain 1D and 3D models toward a storage ring-based X-ray free-electron-laser oscillator

Fourth-generation diffraction-limited synchrotron light sources (DL-SLS) present a compelling platform for advanced light source applications due to their ultra-low emittance (around tens of picometers), sub-micrometer beam stability, and high repetition rates (greater than 1 MHz). Despite these advantages, fundamental limitations, such as long bunch durations (tens of picoseconds), large relative energy spread (~10⁻³), and low peak current (<300 A), have hindered their effectiveness in free-electron laser (FEL) applications. Using a low-gain three-dimensional (3D) model based on NSLS-II upgrade lattice parameters, we demonstrate that a 6% single-pass gain is achievable with an optimized transverse gradient undulator (TGU). Concurrently, recent advances in X-ray optics—specifically, a four-mirror bow-tie resonator utilizing diamond mirrors and beryllium compound refractive lenses (CRLs)—enable total round-trip losses below 4% and an output coupling efficiency near 1%, rendering a Storage Ring based X-ray FEL oscillator (XFELO) a realistic possibility. In the 3D framework, the TGU effectively mitigates the detrimental effects of large energy spread by spatially dispersing the beam, leading to enhanced gain relative to conventional one-dimensional (1D) models. We establish both analytical and numerical connections between the 1D and 3D descriptions, leveraging GENESIS simulations to map equivalent gain conditions. While 1D resonance is defined in the energy domain, the 3D TGU system shifts the resonance dependence to transverse gradient and dispersion parameters. Once optimized, this framework allows predictive modeling using 1D formulas, which can then be validated through full 3D simulations.

43 PARTICLE ACCELERATORS↗
NASA NTRS1990

Five stellar occultations by Neptune - Further observations of ring arcs

Diffraction model fits to the light curves obtained during April 18, 1984 and August 20, 1985 stellar occultations that revealed incomplete rings, or 'arcs' around Neptune, are found to indicate arc radial widths of 8-26 km, and normal optical depths of 0.07-0.14. On the basis of the Neptune pole direction ascertained from Voyager navigation analyses, it is confirmed that the arc observed on August 20, 1985, together with the Hubbard et al. (1986) and Covault et al. (1986) arcs, seem to match the radius of the outermost ring found in Voyager images analyzed by Smith et al. (1989).

Nicholson, Philip D.↗
NASA NTRS2008

Plasma Sheet Circulation Pathways

Global simulations of Earth's magnetosphere in the solar wind compute the pathways of plasma circulation through the plasma sheet. We address the pathways that supply and drain the plasma sheet, by coupling single fluid simulations with Global Ion Kinetic simulations of the outer magnetosphere and the Comprehensive Ring Current Model of the inner magnetosphere, including plasmaspheric plasmas. We find that the plasma sheet is supplied with solar wind plasmas via the magnetospheric flanks, and that this supply is most effective for northward IMF. For southward IMF, the innermost plasma sheet and ring current region are directly supplied from the flanks, with an asymmetry of single particle entry favoring the dawn flank. The central plasma sheet (near midnight) is supplied, as expected, from the lobes and polar cusps, but the near-Earth supply consists mainly of slowly moving ionospheric outflows for typical conditions. Work with the recently developed multi-fluid LFM simulation shows transport via plasma "fingers" extending Earthward from the flanks, suggestive of an interchange instability. We investigate this with solar wind ion trajectories, seeking to understand the fingering mechanisms and effects on transport rates.

Moore, Thomas E.↗
NASA NTRS1985

Parabolic harmonics in magnetospheric modeling - The main dipole and the ring current

A new representation is developed for that portion of the magnetospheric magnetic field which is produced by currents on the magnetopause or outside it. For a magnetopause which is a paraboloid of rotation and which confines all field lines of magnetospheric sources, the fields due to magnetopause currents are derived for two sources, a dipole and a two-parameter model of the ring current, each arbitrarily inclined to the earth-sun line. Methods are also developed for accomodating changes in the size of the magnetospheric cavity and for using nonparaboloidal boundaries, open at the nightside. Neutral points and polar cusps are derived, and in agreement with observations it is found that a growth of the ring current shifts them equatorward. By extrapolation from these results, it is argued that the observation of such shifts during magnetic storms may help resolve the relative importance of two processes proposed for magnetic storms.

Stern, D. P.↗
DOE OSTI2020

The Effects of Field Line Curvature (FLC) Scattering on Ring Current Dynamics and Isotropic Boundary

Abstract In the ring current dynamics, various loss mechanisms contribute to the ring current decay, including losses to the upper atmosphere through particle precipitation. This study implements the field line curvature (FLC) scattering mechanism in a kinetic ring current model and investigates its role in precipitating ions into the ionosphere during the 17 March 2013 storm. Simulation results indicate that (1) the FLC scattering process exerts on energetic ions on the nightside where the magnetospheric configuration is more stretching. It is more effective on heavy ions (e.g., O + ). These ion losses thereafter lead to a faster recovery of the ring current. (2) The FLC‐associated ion precipitation mainly occurs in the outer region (L > 5 for protons and L > 4.5 for oxygen ions) on the nightside. The O + precipitation takes places in a wider region than protons although its intensity is much lower. Comparisons with POES observations suggest that more proton precipitation is needed in the inner region. This is probably caused by the less stretched configuration in the simulation that prevents more precipitation. It may also imply that other loss process is required in the model such as wave‐particle interactions. (3) The storm time precipitating proton flux of tens of keV due to the FLC scattering sometimes becomes comparable to that of electrons on the nightside, although electrons usually dominate the ionospheric energy deposition from the midnight eastward toward the dayside. (4) The FLC scattering process seems to be capable of explaining the formation of isotropic boundary in the ionosphere during the investigated event.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1980

A model of the origin of the Jovian ring

Assuming that the micron-sized particles making up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. This leads to a well-defined size distribution for the ejecta, whose optical properties can be compared with observation. The (most likely silicate) ejecta material maximum diameter is estimated to be 0.1 micron, and most likely the result of Io volcanic activity. The impact model's determination of ejecta size distribution in turn determines the structure of the ring, with the largest ejecta forming the bright ring, medium-sized ejecta forming a disk that extends to the Jovian atmosphere, and small ejecta forming a faint halo whose structure is dominated by electromagnetic forces.

Gruen, E.↗
NASA NTRS2010

Simulation and 'TWINS Observations of the 22 July 2009 Storm

TWINS is the first mission to perform stereo imaging of the Earth's ring current. The magnetic storm on 22 July 2009 is the largest storm observed since TWINS began routine stereo imaging in June 2008. On 22 July 2009, the Dst dropped to nearly -80nT at 7:00 and 10:00 UT. During the main phase and at the peak of the storm, TWINS 1 and 2 were near apogee and moving from pre-dawn to post-dawn local time. The energetic neutral atom (ENA) imagers on the 2 spacecraft captured the storm intensification and the formation of the partial ring current. The peak of the ENA emissions was seen in the midnight-to-dawn local-time sector. The development of this storm has been simulated using the Comprehensive Ring Current Model (CRCM) to understand and interpret the observed signatures. We perform CRCM runs with constant and time-varying magnetic field. The model calculations are validated by comparing the simulated ENA and ion flux intensities with TWINS ENA images and in-situ ion data from THEMIS satellites. Simulation with static magnetic field produces a strong shielding electric field that skews the ion drift trajectories toward dawn. The model's corresponding peak ENA emissions are always eastward than those in the observed TWINS images. On the other hand, simulation with a dynamic magnetic field gives better spatial agreements with both ENA and insitu particle data, suggesting that temporal variations of the geomagnetic field exert a significant influence upon global ring current ion dynamics.

Fok, Mei-Ching↗
NASA NTRS2023

Investigating Potential Causes for the Prediction of Spurious Magnetopause Crossings at Geosynchronous Orbit in MHD Simulations

During intense geomagnetic storms, the magnetopause can move in as far as geosynchronous orbit, leaving the satellites in that orbit out in the magnetosheath. Spacecraft operators turn to numerical models to predict the response of the magnetopause to solar wind conditions, but the predictions of the models are not always accurate. This study investigates four storms with a magnetopause crossing by at least one GOES satellite, using four magnetohydrodynamic models at NASA's Community Coordinated Modeling Center to simulate the events, and analyzes the results to investigate the reasons for errors in the predictions. Two main reasons can explain most of the erroneous predictions. First, the solar wind input to the simulations often contains features measured near the L1 point that did not eventually arrive at Earth; incorrect predictions during such periods are due to the solar wind input rather than to the models themselves. Second, while the models do well when the primary driver of magnetopause motion is a variation in the solar wind density, they tend to overpredict or underpredict the integrated Birkeland currents and their effects during times of strong negative interplanetary magnetic field (IMF) Bz, leading to poorer prediction capability. Coupling the MHD codes to a ring current model, when such a coupling is available, generally will improve the predictions but will not always entirely correct them. More work is needed to fully characterize the response of each code under strong southward IMF conditions as it relates to prediction of magnetopause location.

magnetopause↗
NASA NTRS1981

Saturn's rings - Infrared brightness variation with solar elevation

The main subject of the discussed investigation is the infrared brightness variation of the A, B, and C rings, as a function of solar elevation. Existing models for the B ring are not entirely satisfactory. A description is presented of a model applicable to all three rings. This model and other existing models are compared with the available data. Particular attention is given to the 20-micrometer observations of Saturn's rings. It is found that the brightness variation of the A and B rings with solar elevation angle can be well modeled by an optically thick monolayer of particles, or equivalently, a flat sheet, emitting on one side only. This points to a temperature contrast between the two sides of the ring plane. The infrared brightness of the C ring increases as the solar elevation angle with respect to the ring plane decreases.

Froidevaux, L.↗
NASA NTRS2011

Simulation and Twins Observations of the 22 July 2009 Storm

TWINS is the first mission to perform stereo imaging of the Earth's ring current. The magnetic storm on 22 July 2009 was at the time the largest storm observed since TWINS began routine stereo imaging in June 2008. On 22 July 2009, the Dst dropped to nearly .80 nT at 0700 and 1000 UT. During the main phase, and at the peak of the storm, TWINS 1 and 2 were near apogee and moving between predawn and postdawn local time. The energetic neutral atom (ENA) imagers on the two spacecraft captured the storm intensification and the formation of the partial ring current. The peak of the high-altitude ENA emissions was seen in the midnight-to-dawn local time sector. The development of this storm has been simulated using the comprehensive ring current model (CRCM) to understand and interpret the observed signatures. We perform CRCM runs with constant and time-varying magnetic field. The model calculations are validated by comparing the simulated ENA and ion flux intensities with TWINS ENA images and in situ ion data from a THEMIS satellite. Simulation with a static magnetic field produces a strong shielding electric field that skews the ion drift trajectories toward dawn. The model's corresponding peak ENA emissions are always more eastward than those in the observed TWINS images. On the other hand, the simulation with a dynamic magnetic field gives better spatial agreement with both ENA and in situ particle data, suggesting that temporal variations of the geomagnetic field exert a significant influence upon global ring current ion dynamics.

Fok, M.-C.↗
NASA NTRS1979

The vertical structure and thickness of Saturn's rings

An explanation for the vertical structure and thickness of Saturn's rings compatible with observational data is presented. The model of the rings as being many particles thick is shown to be possible, with random particle motions preventing the complete flattening of the system and a gaussian distribution of particle density with vertical displacement. The model prediction of a maximum ring thickness of tens of meters, however, is in conflict with observations of ring thickness of at least 0.8 km at ring-plane passage. It is shown that perturbations to ring particle orbits caused by the sun and Saturn's large satellites may produce long- and short-period coherent vertical ring displacements and a nonlinear displacement of the ring plane from the equatorial plane with radial distance, leading to an apparent edge-on thickness of a few hundred meters.

Cuzzi, J. N.↗
NASA NTRS2011

Kinetic Simulation and Energetic Neutral Atom Imaging of the Magnetosphere

Advanced simulation tools and measurement techniques have been developed to study the dynamic magnetosphere and its response to drivers in the solar wind. The Comprehensive Ring Current Model (CRCM) is a kinetic code that solves the 3D distribution in space, energy and pitch-angle information of energetic ions and electrons. Energetic Neutral Atom (ENA) imagers have been carried in past and current satellite missions. Global morphology of energetic ions were revealed by the observed ENA images. We have combined simulation and ENA analysis techniques to study the development of ring current ions during magnetic storms and substorms. We identify the timing and location of particle injection and loss. We examine the evolution of ion energy and pitch-angle distribution during different phases of a storm. In this talk we will discuss the findings from our ring current studies and how our simulation and ENA analysis tools can be applied to the upcoming TRIO-CINAMA mission.

Fok, Mei-Ching H.↗
NASA NTRS2009

Modeling of the 22 July 2009 Storm

The magnetic storm on 22 July 2009 is the greatest storm observed since the summer of 2008 when TWINS began its stereo imaging of the magnetosphere, On 22 July 2009, the Dst dropped to nearly -80 nT at 07:00 and 10:00 UT. During the main phase and at the peak of the storm, TWINS 1 and 2 were near apogee and moving from pre-dawn to post-dawn local time. The energetic neutral atom (ENA) Imagers on the 2 spacecraft captured the storm intensification and the formation of the partial ring current. The development of this storm has been simulated using the Comprehensive Ring Current Model (CRCM) to understand and interpret the observed signatures. The CRCM reproduced the double-dip in the Dst index and the simulated ENA flux intensities agree very well with the TWINS images. However, the peak of ion flux predicted by the model is always eastward of the observed maximum by TWINS. This discrepancy posts a challenge to reexamine the physical models employed in the CRCM.

Fok, Mei-Ching↗
NASA NTRS1974

Spinning mode sound propagation in ducts with acoustic treatment

Recent acoustic data have shown larger noise attenuations than predicted for acoustically treated aircraft engine inlets without splitter rings. These data have stimulated a more detailed theoretical study of the acoustic propagation of spinning modes in acoustically treated open circular ducts. In addition, the suppressor with splitter rings was modeled by using the rectangular approximation to the annular duct. The theoretical models were used to determine optimum impedance and maximum attenuation for several spinning lobe numbers from 0 to 50. It is found that for circular ducts the maximum possible attenuation and the optimum wall impedance are strong functions of the lobe number. For annular ducts the attenuation and optimum wall impedance are insensitive to the spinning lobe number for well cut-on modes. The results help explain why suppressors with splitter rings have been quite effective in spite of the lack of detailed information on the noise-source modal structure. Conversely, effective use of outer-wall treatment alone will require expanded knowledge of the noise-source structure. Approximate solutions are presented to help interpret the more exact theoretical results.

Rice, E. J.↗
NASA NTRS1975

Spinning mode sound propagation in ducts with acoustic treatment

Recent acoustic data show larger noise attenuations than predicted for acoustically treated aircraft engine inlets without splitter rings. A theoretical study of the acoustic propagation of spinning modes in acoustically treated open circular ducts is presented, and a suppressor with splitter rings was modeled by using the rectangular approximation to the annular duct. Theoretical models were used to determine optimum impedance and maximum attenuation for several spinning lobe numbers from 0 to 50. Results of the analysis indicate that for circular ducts the maximum possible attenuation and the optimum wall impedance are strong functions of the lobe number, and for annular ducts the attenuation and optimum wall impedance are insensitive to the spinning lobe number for well cut-on modes. These results explain why suppressors with splitter rings were quite effective in spite of the lack of detailed information on the noise source modal structure. Conversely, effective use of outer wall treatment alone will require expanded knowledge of the noise source structure. Approximate solutions are presented to help interpret the more exact theoretical results.

Rice, E. J.↗
NASA NTRS1974

Spinning mode sound propagation in ducts with acoustic treatment

A detailed theoretical study of the acoustic propagation of spinning modes in acoustically treated open circular ducts is described. The suppressor with splitter rings was modeled by using the rectangular approximation to the annular duct. The theoretical models were used to determine optimum impedance and maximum attenuation for several spinning lobe numbers from 0 to 50. Some interesting results of the analysis are that for circular ducts the maximum possible attenuation and the optimum wall impedance are strong functions of the lobe number. For annular ducts the attenuation and optimum wall impedance are insensitive to the spinning lobe number for well cut-on modes. The above results help explain why suppressors with splitter rings were quite effective in spite of the lack of detailed information on the noise source modal structure.

Rice, E. J.↗
DOE OSTI2025

Advancements in NEAMS Tool Capabilities for Multiphysics Simulation of Fast Reactor Core Bowing and Identification of Validation Test Data

Under the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program, an integrated multiphysics approach is being developed to model the core bowing phenomena important to liquid metal-cooled fast reactors. Core bowing is an important passive safety mechanism in liquid metal-cooled fast reactors and involves Multiphysics effects including radiation transport, fluid flow, heat transfer, and mechanical response to temperature and flux gradients. This report summarizes recent progress on developing a multiphysics, MOOSE-based workflow to predict core bowing and associated reactivity feedback. Last year, thermal fluids and mechanics were coupled on a multi-assembly benchmark problem based on ABR-1000 design. This year, the reactor physics code Griffin was assessed for readiness of core bowing calculations. Preliminary integration of Griffin’s ring-heterogeneous model with thermal fluids and thermal mechanics solvers was performed. Specifically, thermal-mechanics and reactor physics were coupled for single- and multi-assembly problems, and reactor physics and subchannel methods were coupled for a single assembly model. Finally, the workflow of all three physics was preliminarily demonstrated on a single assembly model. Caveats and future development needed have been identified. To supplement the multiphysics demonstration, verification and assessment efforts of thermos-mechanical capabilities for modeling thermo-mechanical core bowing behavior were continued by analyzing IAEA Verification Problem 5 which includes radiation swelling and creep. Additionally, a small core reactor physics benchmark defined by Japan Atomic Energy Agency (JAEA) was performed to assess neutronics models for estimating reactivity feedback. Finally, Fast Flux Test Facility (FFTF) validation test data for core bowing phenomena has been identified and summarized, with a recommended path forward for validation once this capability is mature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Constraining the Dynamo Layers in Jupiter and Saturn with Observations and Scaling Laws

The dipole-dominated magnetic fields of Jupiter and Saturn provide evidence for active dynamos operating within their deep interiors, yet the depth of the convecting dynamo layers remains poorly constrained. While magnetic field observations, gravity data, and interior models each provide partial insight, they have not been combined into a single, self-consistent picture of the internal structure. Here, we develop a framework that links observed magnetic field strength with intrinsic heat flux and gravity-constrained interior structure using energy-based dynamo scaling laws. By relating the axial magnetic field strength to the convective power, we infer the radial thickness of the dynamo-generating region for both Jupiter and Saturn. The constants of proportionality in the scaling relations are derived using independent constraints from Earth observations, Jupiter observations, and numerical dynamo simulations. Applied to Jupiter, this framework shows how the inferred dynamo layer thickness is coupled to the outer boundary of the dynamo region. Thinner dynamo layers are predicted when the outer boundary shifts to shallower depths, and no solutions are possible when the outer boundary is less than 73% of Jupiter’s radius. These results constrain plausible geometries for future numerical dynamo simulations. Extending the analysis to Saturn, we find a thick, deep-seated dynamo layer with an outer radius at 42% of the radius to be most plausible. An alternative solution with an inner radius of the dynamo region at 60% of the planetary radius, as suggested by ring seismology models, requires a very thin dynamo layer, occupying only 2%–3% of the total radius.

Geosciences↗