Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resource selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Research reactor QA standard selection, survey and benchmarking

In June of 2012, the Nuclear Quality and Requirements Department at SNL TA-V conducted a survey of research facilities in the U.S. and internationally to determine 1) how they chose to implement QA and SQA and 2) to serve as a starting point for further questions. The results, collected in July 2012, were a broad spectrum of locations, standard selection, and regulating bodies in the U.S. and internationally. The results showed that standard selection, regulating agency, and resources allocated to implement QA (beyond a certain minimum) did not appear to have an impact on self-reported QA program effectiveness. The single greatest indicator of self reported QA program quality effectiveness appeared to be the number of different techniques used to verify QA program effectiveness. The responses to the survey are detailed in the following report, along with a list of suggested follow-on questions for specific facilities.

Pratt, Richard J.↗
DOE OSTI2024

Biodegradable Temperature & pH Sensors VIASTIMULI-Responsive Polymers

Soil sensors play a key role in agriculture, and for good reason; knowledge about soil conditions enables farmers to make informed decisions about resource expenditure and crop selection for areas of land. On an industrial agriculture scale, though, this is difficult; the average U.S. farm is approximately 500 acres. To put that in perspective, if you’ve driven past Concannon Winery, all that land is only about 200 acres. This is why modern state-of-the-art soil sensors need to be equipped to not only collect precise and accurate data, but also to transmit that data large distances.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Evaluation of black and white microfilm system

Microfilms and processes suitable for microscopying black-and-white films from the Earth Resources Aircraft Program were selected. A further purpose was to chose duplication materials which are suitable for multiple generation copies for economical dissemination to satisfy index and reference purposes. The basic requirements are that the gamma of the negative film and the overall system gamma of the multistage duplication process should be near unity, and that there should be sufficient resolution to reproduce the major salient image features of the original 9 1/2-inch format film.

Gooding, R. A.↗
NASA NTRS1976

Catalogue of satellite photography of the active volcanoes of the world

A catalogue is presented of active volcanoes as viewed from Earth-orbiting satellites. The listing was prepared of photographs, which have been screened for quality, selected from the earth resources technology satellite (ERTS) and Skylab, Apollo and Gemini spacecraft. There is photography of nearly every active volcano in the world; the photographs are particularly useful for regional studies of volcanic fields.

Heiken, G.↗
NASA NTRS1996

Lessons learned: DC-X

The DC-X was conceived and developed specifically to lay the ground work for significantly lowering the cost of space operations. The system design was based on an initial set of program goals and a finite, limited set of resources. The goal in its simplest terms was to demonstrate vertical landing after rotation of the vehicle from a nose-first to an engines-first altitude. Finite resources actually drove the selection of a robust design to reduce fabrication and preflight testing costs. The result was a system with a large amount of flexibility which allowed expansion of the test goals as the system, and test program, evolved. The use of the vehicle flight computer interfacing with the ground control system for flight crew training was also not an initial concept. However, by defining an architecture for the system control modes which allowed additions and modifications as learning progressed, the 6 DOF codes used for flight controls software development were transported to the operating system to be used in a simulated flight mode. Flight data reduction was also greatly improved as the program progressed, and the data needs and presentation were refined. The software, avionics hardware, and the FOCC system development proceeded ahead of the vehicle, primarily because most of the hardware elements were existing at the outset of the program. The Built-in-Test (BIT) for avionics and propulsion systems were adequate. Particularly the flight readiness system which verified the vehicle health after engine start and before throttle-up for flight.

Steinmeyer, D. A.↗
NASA NTRS1994

Electrochemical Technology for Oxygen Removal and Measurement in the CELSS Test Facility, Engineering Development Unit

The Life Support Flight Program is evaluating regenerative technologies, including those that utilize higher plants, as a means to reduce resupply over long duration space missions. Constructed to assist in the evaluation process is the CELSS Test Facility Engineering Development Unit (CTF-EDU) an environmentally closed (less than 1% mass and thermal leakage) technology test bed. This ground based fully functional prototype is currently configured to support crop growth, utilizing the power, volume and mass resources allocated for two space station racks. Sub-system technologies were selected considering their impact on available resources, their ability to minimize integration issues, and their degree of modularity. Gas specific mass handling is a key sub-system technology for both biological and physical/chemical life support technologies. The CTF-EDU requires such a system to accommodate non-linear oxygen production from crops, by enabling the control system to change and sustain partial pressure set points in the growth volume. Electrochemical cells are one of the technologies that were examined for oxygen handling in the CTF-EDU. They have been additionally considered to meet other regenerative life support functions, such as oxygen generation, the production of potable water from composite waste streams, and for having the potential to integrate life support functions with those of propulsion and energy storage. An oxygen removal system based on an electrochemical cell was chosen for the EDU due to it's low power, volume and mass requirements (10W, 0.000027 cu m, 4.5 kg) and because of the minimal number of integration considerations. Unlike it's competitors, the system doesn't require post treatments of its byproducts, or heat and power intensive regenerations, that also mandate system redundancy or cycling. The EDUs oxygen removal system only requires two resources, which are already essential to controlled plant growth: electricity and water. Additionally, the amount of oxygen that is removed from the EDU is directly proportional to the cell input current via Faraday's constant, potentially allowing for a mol/electron measurement of photosynthetic rate. The currently operative oxygen removal system has maintained reduced oxygen set points within the EDU, and preparation is underway to verify of the accuracy of electrochemical measurement of oxygen production and hence, photosynthesis. This paper examines the working principles of the electrochemical cell, outlines the overall design of the oxygen removal system and its integration with other EDU subsystems, and summarizes test results obtained over crop growth cycles in the CTF-EDU.

Drews, Michael E.↗
NASA NTRS2005

Space-Based Telemetry and Range Safety Project Ku-Band and Ka-Band Phased Array Antenna

The National Aeronautics and Space Administration Space-Based Telemetry and Range Safety study is a multiphase project to increase data rates and flexibility and decrease costs by using space-based communications assets for telemetry during launches and landings. Phase 1 used standard S-band antennas with the Tracking and Data Relay Satellite System to obtain a baseline performance. The selection process and available resources for Phase 2 resulted in a Ku-band phased array antenna system. Several development efforts are under way for a Ka-band phased array antenna system for Phase 3. Each phase includes test flights to demonstrate performance and capabilities. Successful completion of this project will result in a set of communications requirements for the next generation of launch vehicles.

Whiteman, Donald E.↗
NASA NTRS2003

Microsystems Fabrication Laboratory-New Class 100 Cleanroom Completed and Certified

A new Microsystems Fabrication Laboratory (MFL), a Class 100 cleanroom fabrication facility, was completed and certified in 2002 at the NASA Glenn Research Center. This facility, to be used by Glenn's Instrumentation and Controls Division, was designed and built as part of the NASA Construction of Facilities Program. The design, construction, and certification phases were managed by personnel from Glenn s Facilities and Test Engineering Division. Because of time constraints and the need for specialized cleanroom expertise, this 1000 ft2 laboratory was completed using a design-build procurement. Facility Planning & Resources (Pittsburgh, PA) was selected as the prime contractor and provided the architectural design and project management. A major subcontractor, AdvanceTEC, LLC (Richmond, VA), provided the mechanical and electrical design and performed the construction services. Throughout this fast-track project, Facilities and Test Engineering Division personnel provided overall project management and worked closely with the contractors to ensure that the customers needs were addressed and that the impact of the project implementation was minimized.

Borato, Frances M.↗
NASA NTRS2005

Ku- and Ka-Band Phased Array Antenna for the Space-Based Telemetry and Range Safety Project

The National Aeronautics and Space Administration Space-Based Telemetry and Range Safety study is a multiphase project to increase data rates and flexibility and decrease costs by using space-based communications assets for telemetry during launches and landings. Phase 1 used standard S-band antennas with the Tracking and Data Relay Satellite System to obtain a baseline performance. The selection process and available resources for Phase 2 resulted in a Ku-band phased array antenna system. Several development efforts are under way for a Ka-band phased array antenna system for Phase 3. Each phase includes test flights to demonstrate performance and capabilities. Successful completion of this project will result in a set of communications requirements for the next generation of launch vehicles.

Whiteman, Donald E.↗
NASA NTRS2009

NASA Global Precipitation Mission Ground Validation Implementation

The Global Precipitation Mission (GPM; core-satellite launch 2013) will provide Ka/Ku-band dual-frequency precipitation radar (DPR) and accompanying passive microwave radiometer-diagnosed precipitation estimates over a latitude range of 65 N to 65 S. The extended latitudinal domain of GPM coverage combined with requirements to detect (and in the case of liquid, estimate) liquid and frozen precipitation rates for values ranging from several hundred to just a few tenths of a millimeter per hour present new challenges to the development of physically-based satellite precipitation retrieval algorithms. On regional scales select national and international resources such as existing calibrated radar and rain gauge networks can provide basic datasets that enable direct statistical validation of GPM core-satellite reflectivitys and core/constellation rain rate measurements. Near-term planned field campaign involvements include Finland/Baltic Sea (fall 2010; joint CloudSat,GPM, and European study of precipitation in low-altitude melting layers and snowfall in the vicinity of the Helsinki testbed), central Oklahoma (spring 2011; joint with DOE ARM- precipitation retrievals over a mid-latitude continental land surface), and the Great Lakes region (winter 2011-12, snowfall retrieval).

Petersen, Walter A.↗
DOE OSTI2022

The DSA Toolkit Shines Light Into Dark and Stormy Archives

Web archive collections are created with a particular purpose in mind. A curator selects seeds, or original resources, which are then captured by an archiving system and stored as archived web pages, or mementos. The systems that build web archive collections are often configured to revisit the same original resource multiple times. This is incredibly useful for understanding an unfolding news story or the evolution of an organization. Unfortunately, over time, some of these original resources can go off-topic and no longer suit the purpose for which the collection was originally created. They can go off-topic due to web site redesigns, changes in domain ownership, financial issues, hacking, technical problems, or because their content has moved on from the original topic. Even though they are off-topic, the archiving system will still capture them, thus it becomes imperative to anyone performing research on these collections to identify these off-topic mementos. Hence, we present the Off-Topic Memento Toolkit, which allows users to detect off-topic mementos within web archive collections. The mementos identified by this toolkit can then be separately removed from a collection or merely excluded from downstream analysis. The following similarity measures are available: byte count, word count, cosine similarity, Jaccard distance, Sørensen-Dice distance, Simhash using raw text content, Simhash using term frequency, and Latent Semantic Indexing via the gensim library. We document the implementation of each of these similarity measures. We possess a gold standard dataset generated by manual analysis, which contains both off-topic and on-topic mementos. Using this gold standard dataset, we establish a default threshold corresponding to the best F1 score for each measure. We also provide an overview of potential future directions that the toolkit may take.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Data and Tools for Energy Planning and Analysis

The National Renewable Energy Laboratory (NREL) creates widely used data and tools to facilitate energy system planning and analysis. These software tools have been developed for complex research problems and perfected over real-world applications and laboratory validations. Some tools are award winners, others are open-source data explorers, and all are rigorously designed to empower decision-makers with accurate and accessible information. This software selection shows how NREL resources can help stakeholders achieve a clean, just, and resilient energy transformation.

data↗
DOE OSTI2022

Habitat use by female desert tortoises suggests tradeoffs between resource use and risk avoidance

Animals may select habitat to maximize the benefits of foraging on growth and reproduction, while balancing competing factors like the risk of predation or mortality from other sources. Variation in the distribution of food resources may lead animals to forage at times or in places that carry greater predation risk, with individuals in poor quality habitats expected to take greater risks while foraging. We studied Mojave desert tortoises ( Gopherus agassizii ) in habitats with variable forage availability to determine if risk aversion in their selection of habitat relative was related to abundance of forage. As a measure of risk, we examined tortoise surface activity and mortality. We also compared tortoise body size and body condition between habitats with ample forage plants and those with less forage plants. Tortoises from low forage habitats selected areas where more annual plants were nutritious herbaceous flowering plants but did not favor areas of greater perennial shrub cover that could shelter them or their burrows. In contrast, tortoises occupying high forage habitats showed no preference for forage characteristics, but used burrows associated with more abundant and larger perennial shrubs. Tortoises in high forage habitats were larger and active above ground more often but did not have better body condition. Mortality was four times higher for females occupying low forage habitat than those in high forage habitat. Our results are consistent with the idea that tortoises may minimize mortality risk where food resources are high, but may accept some tradeoff of greater mortality risk in order to forage optimally when food resources are limiting.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Optimizing Labor Resources at Manufacturing Enterprises

Attention focuses on the selection of mathematical models and the formulation of algorithms for organizational decision making in optimizing labor resources at manufacturing enterprises. Examples of labor optimization are presented.

42 ENGINEERING↗
DOE OSTI2023

Material Design Strategies for Recovery of Critical Resources from Water

Population growth, urbanization, and decarbonization efforts are collectively straining the supply of limited resources that are necessary to produce batteries, electronics, chemicals, fertilizers, and other important products. Securing the supply chains of these critical resources via the development of separation technologies for their recovery represents a major global challenge to ensure stability and security. Surface water, groundwater, and wastewater are emerging as potential new sources to bolster these supply chains. Recently, a variety of material-based technologies have been developed and employed for separations and resource recovery in water. Judicious selection and design of these materials to tune their properties for targeting specific solutes is central to realizing the potential of water as a source for critical resources. Here, the materials that are developed for membranes, sorbents, catalysts, electrodes, and interfacial solar steam generators that demonstrate promise for applications in critical resource recovery are reviewed. In addition, a critical perspective is offered on the grand challenges and key research directions that need to be addressed to improve their practical viability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Elemental characterization of crystalline silicotitanate following Hanford tank waste processing

To expedite vitrification of low activity waste at the Hanford Site, a Tank-Side Cesium Removal system is being evaluated. This method utilizes an inorganic ion exchange (IX) media, crystalline silicotitanate (CST), to remove 99.9% of the 137Cs from tank waste supernate. Laboratory scale testing of the ion exchange process has been conducted by Pacific Northwest National Laboratory to evaluate Cs removal with CST in supernates collected from Hanford tanks 241-AP-107 and 241-AW-102 under prototypic plant operating conditions. In an effort to understand the selectivity and partitioning of other analytes toward CST, specifically Resource Conservation and Recovery Act (RCRA) hazardous metals, selected +2 cations, and transuranic elements, a method for the complete dissolution of CST and Cs removal from the digestate was applied to the spent CST post-processing Hanford tank waste. The CST was shown to adsorb a relevant fraction of Ca, Cd, Pb, Sr, and potentially Fe by IX and/or other mechanisms. The spent CST also adsorbed actinides, including U, Pu, Np, and Am. This work discusses digestion of CST and removal of Cs from the digestate allowing effective analysis and provides insight as to what analytes may be competing for IX sites on the CST media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Evaluation of Distributed Power Apportioning with Net Load Management Engine in Microgrids Using Power Hardware-in-the-Loop Simulation

This article presents the performance evaluation of ratio consensus-based distributed power apportioning engine along with centralized net load management (NLM) engine that ensures viable and stable operation of an islanded microgrid. Managing net load variability in a microgrid with high penetrations of uncertain renewable generation and ever-changing load demands is a crucial need in order to ensure viable and stable operation of the microgrid. Centralized “dispatch-rule”-based and/or multi-agent-based distributed control of distributed energy resources (DERs) in microgrid are well accepted for microgrid by adapting ANSI/ISA-95-based hierarchical control architecture. In the application where microgrid network has large geographical span with multiple DERs dispersed in the network, high penetration of uncertain renewable energy resources, and ever-changing load demands, a judicious selection of techniques/solutions for managing net-load resources for maintaining viability and stability is required. With this motivation, this article proposes a novel solution to mitigate the challenges by incorporating a mixed centralized NLM engine and distributed power apportioning control of DERs and loads. A power-hardware-in-the-loop (PHIL) -based experiment is conducted with the centralized NLM engine and the distributed power apportioning engine along with two commercial inverters. The experimental results validates the efficacy of the proposed method in ensuring viability and stability of a microgrid.

hardware-in-the-loop simulation↗