Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regression models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

NASA's Functional Task Test: High Intensity Exercise Improves the Heart Rate Response to a Stand Test Following 70 Days of Bedrest

Cardiovascular adaptations due to spaceflight are modeled with 6deg head-down tilt bed rest (BR) and result in decreased orthostatic tolerance. We investigated if high-intensity resistive and aerobic exercise with and without testosterone supplementation would improve the heart rate (HR) response to a 3.5-min stand test and how quickly these changes recovered following BR. During 70 days of BR male subjects performed no exercise (Control, n=10), high intensity supine resistive and aerobic exercise (Exercise, n=9), or supine exercise plus supplemental testosterone (Exercise+T, n=8; 100 mg i.m., weekly in 2-week on/off cycles). We measured HR for 2 min while subjects were prone and for 3 min after standing twice before and 0, 1, 6, and 11 days after BR. Mixed-effects linear regression models were used to evaluate group, time, and interaction effects. Compared to pre-bed rest, prone HR was elevated on BR+0 and BR+1 in Control, but not Exercise or Exercise+T groups, and standing HR was greater in all 3 groups. The increase in prone and standing HR in Control subjects was greater than either Exercise or Exercise+T groups and all groups recovered by BR+6. The change in HR from prone to standing more than doubled on BR+0 in all groups, but was significantly less in the Exericse+T group compared to the Control, but not Exercise group. Exercise reduces, but does not prevent the increase in HR observed in response to standing. The significantly lower HR response in the Exercise+T group requires further investigation to determine physiologic significance.

Laurie, Steven S.↗
NASA NTRS2005

Three-Dimensional Aeroelastic and Aerothermoelastic Behavior in Hypersonic Flow

The aeroelastic and aerothermoelastic behavior of three-dimensional configurations in hypersonic flow regime are studied. The aeroelastic behavior of a low aspect ratio wing, representative of a fin or control surface on a generic hypersonic vehicle, is examined using third order piston theory, Euler and Navier-Stokes aerodynamics. The sensitivity of the aeroelastic behavior generated using Euler and Navier-Stokes aerodynamics to parameters governing temporal accuracy is also examined. Also, a refined aerothermoelastic model, which incorporates the heat transfer between the fluid and structure using CFD generated aerodynamic heating, is used to examine the aerothermoelastic behavior of the low aspect ratio wing in the hypersonic regime. Finally, the hypersonic aeroelastic behavior of a generic hypersonic vehicle with a lifting-body type fuselage and canted fins is studied using piston theory and Euler aerodynamics for the range of 2.5 less than or equal to M less than or equal to 28, at altitudes ranging from 10,000 feet to 80,000 feet. This analysis includes a study on optimal mesh selection for use with Euler aerodynamics. In addition to the aeroelastic and aerothermoelastic results presented, three time domain flutter identification techniques are compared, namely the moving block approach, the least squares curve fitting method, and a system identification technique using an Auto-Regressive model of the aeroelastic system. In general, the three methods agree well. The system identification technique, however, provided quick damping and frequency estimations with minimal response record length, and therefore o ers significant reductions in computational cost. In the present case, the computational cost was reduced by 75%. The aeroelastic and aerothermoelastic results presented illustrate the applicability of the CFL3D code for the hypersonic flight regime.

McNamara, Jack J.↗
NASA NTRS2016

Assessing the Transferability of Statistical Predictive Models for Leaf Area Index Between Two Airborne Discrete Return LiDAR Sensor Designs Within Multiple Intensely Managed Loblolly Pine Forest Locations in the South-Eastern USA

Leaf area is an important forest structural variable which serves as the primary means of mass and energy exchange within vegetated ecosystems. The objective of the current study was to determine if leaf area index (LAI) could be estimated accurately and consistently in five intensively managed pine plantation forests using two multiple-return airborne LiDAR datasets. Field measurements of LAI were made using the LiCOR LAI2000 and LAI2200 instruments within 116 plots were established of varying size and within a variety of stand conditions (i.e. stand age, nutrient regime and stem density) in North Carolina and Virginia in 2008 and 2013. A number of common LiDAR return height and intensity distribution metrics were calculated (e.g. average return height), in addition to ten indices, with two additional variants, utilized in the surrounding literature which have been used to estimate LAI and fractional cover, were calculated from return heights and intensity, for each plot extent. Each of the indices was assessed for correlation with each other, and was used as independent variables in linear regression analysis with field LAI as the dependent variable. All LiDAR derived metrics were also entered into a forward stepwise linear regression. The results from each of the indices varied from an R2 of 0.33 (S.E. 0.87) to 0.89 (S.E. 0.36). Those indices calculated using ratios of all returns produced the strongest correlations, such as the Above and Below Ratio Index (ABRI) and Laser Penetration Index 1 (LPI1). The regression model produced from a combination of three metrics did not improve correlations greatly (R2 0.90; S.E. 0.35). The results indicate that LAI can be predicted over a range of intensively managed pine plantation forest environments accurately when using different LiDAR sensor designs. Those indices which incorporated counts of specific return numbers (e.g. first returns) or return intensity correlated poorly with field measurements. There were disparities between the number of different types of returns and intensity values when comparing the results from two LiDAR sensors, indicating that predictive models developed using such metrics are not transferable between datasets with different acquisition parameters. Each of the indices were significantly correlated with one another, with one exception (LAI proxy), in particular those indices calculated from all returns, which indicates similarities in information content for those indices. It can then be argued that LiDAR indices have reached a similar stage in development to those calculated from optical-spectral sensors, but which offer a number of advantages, such as the reduction or removal of saturation issues in areas of high biomass.

Sumnall, Matthew↗
NASA NTRS2020

Response of Surface Shortwave Cloud Radiative Effect to Greenhouse Gases and Aerosols and Its Impact on Summer Maximum Temperature

Shortwave cloud radiative effects (SWCREs), defined as the difference of the shortwave radiative flux between all-sky and clear-sky conditions at the surface, have been reported to play an important role in influencing the Earth's energy budget and temperature extremes. In this study, we employed a set of global climate models to examine the SWCRE responses to CO2, black carbon (BC) aerosols, and sulfate aerosols in boreal summer over the Northern Hemisphere. We found that CO2 causes positive SWCRE changes over most of the NH, and BC causes similar positive responses over North America, Europe, and eastern China but negative SWCRE over India and tropical Africa. When normalized by effective radiative forcing, the SWCRE from BC is roughly 3–5 times larger than that from CO2. SWCRE change is mainly due to cloud cover changes resulting from changes in relative humidity (RH) and, to a lesser extent, changes in cloud liquid water, circulation, dynamics, and stability. The SWCRE response to sulfate aerosols, however, is negligible compared to that for CO2 and BC because part of the radiation scattered by clouds under all-sky conditions will also be scattered by aerosols under clear-sky conditions. Using a multilinear regression model, it is found that mean daily maximum temperature (Tmax) increases by 0.15 and 0.13 K per watt per square meter (W m−2) increase in local SWCRE under the CO2 and BC experiment, respectively. When domain-averaged, the contribution of SWCRE change to summer mean Tmax changes was 10 %–30 % under CO2 forcing and 30 %–50 % under BC forcing, varying by region, which can have important implications for extreme climatic events and socioeconomic activities.

surface shortwave cloud radiative effect↗
NASA NTRS2019

Calibration and Data Analysis Recommendations for Three-Component Moment Balances

Fundamental characteristics of design, calibration, and application of three-component moment balances are investigated in great detail. These balances are typically used to determine loads on control surfaces, canards, or other parts that are attached to a wind tunnel model. First, three different descriptions of the load state of a moment balance are reviewed. Then, load transformations between different load formats and the combined load diagram for two of the three load components are discussed. An error analysis showed that it is critical to maximize the product of the distance between the bending moment gages and their sensitivities in order to minimize the overall error in the normal force prediction. In addition, it is important to apply a sufficient number of calibration loadings near the first bending moment gage. Then, unwanted near-linear dependencies between the two bending moment gage outputs can be avoided. The error in the bending moment prediction is also investigated that results from the elastic deformation of the metric part of the balance under load. Finally, the application of the Non-Iterative Method to three-component moment balance calibration data is described in order to obtain regression models that can be used to predict loads from measured outputs during a wind tunnel test.

Strain-Gage Balance↗
NASA NTRS1989

Continental shelf fish production estimation from CZCS chlorophyll data

A method for ocean fish production estimation was proposed for development. The method was to use data acquired with the Coastal Zone Color Scanner, and processed into chlorophyll concentrations by the GSFC ocean Sciences Division, in combination with fish production and primary production data acquired from different ocean areas. A linear relation exits between annual fish production and annual phytoplankton carbon production for a wide range of coastal ocean environments. The uses of several existing algorithms which relate primary production to CZCS chlorophyll data as input to the fish production regression model is proposed. A question relating phytoplankton production to CZCS chlorophyll was obtained by Eppley (1984) using chlorophyll data obtained from field samples, equivalent to chlorophyll data obtained from CZCS imagery, and primary production data obtained from ship-board observations on a wide variety of coastal and open ocean environments. This equation was modified with additional data and was successfully tested using CZCS data and field chlorophyll and phytoplankton production data obtained from northeastern North American continental shelf waters and Atlantic open ocean waters. The modified Eppley (1984) relation also estimated phytoplankton annual carbon production in the Sargasso Sea within the confidence limits of a mean value obtained from the Eppley (1984) equation for oceanic waters that provide about 90 percent of total ocean primary production. The modified Eppley production formula applied to CZCS chlorophyll data obtained from several northeastern North American coastal environments gave phytoplankton annual carbon production values similar to the values used in the fish production regression equation.

Iverson, Richard L.↗
NASA NTRS2008

Radiometric Modeling and Calibration of the Geostationary Imaging Fourier Transform Spectrometer (GIFTS)Ground Based Measurement Experiment

The ultimate remote sensing benefits of the high resolution Infrared radiance spectrometers will be realized with their geostationary satellite implementation in the form of imaging spectrometers. This will enable dynamic features of the atmosphere s thermodynamic fields and pollutant and greenhouse gas constituents to be observed for revolutionary improvements in weather forecasts and more accurate air quality and climate predictions. As an important step toward realizing this application objective, the Geostationary Imaging Fourier Transform Spectrometer (GIFTS) Engineering Demonstration Unit (EDU) was successfully developed under the NASA New Millennium Program, 2000-2006. The GIFTS-EDU instrument employs three focal plane arrays (FPAs), which gather measurements across the long-wave IR (LWIR), short/mid-wave IR (SMWIR), and visible spectral bands. The GIFTS calibration is achieved using internal blackbody calibration references at ambient (260 K) and hot (286 K) temperatures. In this paper, we introduce a refined calibration technique that utilizes Principle Component (PC) analysis to compensate for instrument distortions and artifacts, therefore, enhancing the absolute calibration accuracy. This method is applied to data collected during the GIFTS Ground Based Measurement (GBM) experiment, together with simultaneous observations by the accurately calibrated AERI (Atmospheric Emitted Radiance Interferometer), both simultaneously zenith viewing the sky through the same external scene mirror at ten-minute intervals throughout a cloudless day at Logan Utah on September 13, 2006. The accurately calibrated GIFTS radiances are produced using the first four PC scores in the GIFTS-AERI regression model. Temperature and moisture profiles retrieved from the PC-calibrated GIFTS radiances are verified against radiosonde measurements collected throughout the GIFTS sky measurement period. Using the GIFTS GBM calibration model, we compute the calibrated radiances from data collected during the moon tracking and viewing experiment events. From which, we derive the lunar surface temperature and emissivity associated with the moon viewing measurements.

Tian, Jialin↗
NASA NTRS2022

Patterns and Controls on Island-Wide Aboveground Biomass Accumulation in Second-Growth Forests of Puerto Rico

Understanding the heterogeneity of biomass accumulation in second-growth tropical forests following land use abandonment is important for informing ecosystem carbon models and forest restoration efforts. There is an urgent need for a broad sample of second-growth forests to enhance our knowledge of carbon accumulation in human-dominated landscapes, especially for older forests. Puerto Rico has predominantly second-growth forests, ranging in age from approximately 25 to more than 80 years. We used an island-wide sample of airborne lidar from the NASA Goddard Lidar, Hyperspectral, and Thermal (G-LiHT) Airborne Imager collected on March 2017, forest inventory data, and data on forest age, precipitation, soils, and land use to estimate aboveground biomass stocks in moist and wet, second-growth tropical forests. Biomass accumulation rates in Puerto Rico were lower, on average, than in other Neotropical forests. Median biomass across >16,700 ha of older second-growth forests was 105 Mg ha−1, and sampled biomass rarely surpassed 250 Mg ha−1. Differences in biomass by age were large and persistent across different substrates and land uses, with a plateau in the pattern of island-wide biomass accumulation after about 33 years. A spatial regression model showed that multiple factors were related to biomass accumulation, including time since abandonment, geologic substrate, past land use as coffee or pasture, precipitation, topographic wetness index, and slope. Our findings have important consequences for the total carbon storage and expected climate mitigation benefits of large-scale reforestation efforts, and highlight the value of airborne lidar for quantifying biomass variability in complex tropical landscapes.

Sebastián Martinuzzi↗
NASA NTRS2017

Evaluating Soil Moisture Retrievals from ESA's SMOS and NASA's SMAP Brightness Temperature Datasets

Two satellites are currently monitoring surface soil moisture (SM) using L-band observations: SMOS (Soil Moisture and Ocean Salinity), a joint ESA (European Space Agency), CNES (Centre national d'tudes spatiales), and CDTI (the Spanish government agency with responsibility for space) satellite launched on November 2, 2009 and SMAP (Soil Moisture Active Passive), a National Aeronautics and Space Administration (NASA) satellite successfully launched in January 2015. In this study, we used a multilinear regression approach to retrieve SM from SMAP data to create a global dataset of SM, which is consistent with SM data retrieved from SMOS. This was achieved by calibrating coefficients of the regression model using the CATDS (Centre Aval de Traitement des Donnes) SMOS Level 3 SM and the horizontally and vertically polarized brightness temperatures (TB) at 40 deg incidence angle, over the 2013 - 2014 period. Next, this model was applied to SMAP L3 TB data from Apr 2015 to Jul 2016. The retrieved SM from SMAP (referred to here as SMAP_Reg) was compared to: (i) the operational SMAP L3 SM (SMAP_SCA), retrieved using the baseline Single Channel retrieval Algorithm (SCA); and (ii) the operational SMOSL3 SM, derived from the multiangular inversion of the L-MEB model (L-MEB algorithm) (SMOSL3). This inter-comparison was made against in situ soil moisture measurements from more than 400 sites spread over the globe, which are used here as a reference soil moisture dataset. The in situ observations were obtained from the International Soil Moisture Network (ISMN; https:ismn.geo.tuwien.ac.at) in North of America (PBO_H2O, SCAN, SNOTEL, iRON, and USCRN), in Australia (Oznet), Africa (DAHRA), and in Europe (REMEDHUS, SMOSMANIA, FMI, and RSMN). The agreement was analyzed in terms of four classical statistical criteria: Root Mean Squared Error (RMSE),Bias, Unbiased RMSE (UnbRMSE), and correlation coefficient (R). Results of the comparison of these various products with in situ observations show that the performance of both SMAP products i.e. SMAP_SCA and SMAP_Reg is 48 similar and marginally better to that of the SMOSL3 product particularly over the PBO_H2O, SCAN, and USCRN sites. However, SMOSL3 SM was closer to the in situ observations over the DAHRA and Oznet sites. We found that the correlation between all three datasets and in situ measurements is best (R 0.80) over the Oznet sites and worst (R 0.58) over the SNOTEL sites for SMAP_SCA and over the DAHRA and SMOSMANIA sites (R 0.51 and R 0.45 for SMAP_Reg and SMOSL3, respectively). The Bias values showed that all products are generally dry, except over RSMN, DAHRA, and Oznet (and FMI for SMAP_SCA). Finally, our analysis provided interesting insights that can be useful to improve the consistency between SMAP and SMOS datasets.

SMOS↗
NASA NTRS1973

Investigation using data from ERTS to develop and implement utilization of living marine resources

The author has identified the following significant results. The feasibility of utilizing ERTS-1 data in conjunction with aerial remote sensing and sea truth information to predict the distribution of menhaden in the Mississippi Sound during a specific time frame has been demonstrated by employing a number of uniquely designed empirical regression models. The construction of these models was made possible through innovative statistical routines specifically developed to meet the stated objectives.

Stevenson, W. H.↗
NASA NTRS1973

Statistical Evaluation of Time Series Analysis Techniques

The performance of a modified version of NASA's multivariate spectrum analysis program is discussed. A multiple regression model was used to make the revisions. Performance improvements were documented and compared to the standard fast Fourier transform by Monte Carlo techniques.

Benignus, V. A.↗
NASA NTRS1973

Critical configurations (determinantal loci) for range and range difference satellite networks

The observational modes of Geometric Satellite Geodesy are discussed. The geometrical analysis of the problem yielded a regression model for the adjustment of the observations along with a suitable and convenient metric for the least-squares criterion. The determinantal loci (critical configurations) for range networks are analyzed. An attempt is made to apply elements of the theory of variants for this purpose. The use of continuously measured range differences for loci determination is proposed.

Tsimis, E.↗
NASA NTRS1974

Reflectance of vegetation, soil, and water

The author has identified the following significant results. The majority of the rangelands of Hidalgo County, Texas are used in cow-calf operations. Continuous year-long grazing is practiced on about 60% of the acreage and some type of deferred system on the rest. Mechanical brush control is used more than chemical control. Ground surveys gave representative estimates for 15 vegetable crops produced in Hidalgo County. ERTS-1 data were used to estimate the acreage of citrus in the county. Combined Kubleka Munk and regression models, that included a term for shadow areas, gave a higher correlation of composite canopy reflectance with ground truth than either model alone.

Wiegand, C. L.↗
NASA NTRS1976

Passenger comfort during terminal-area flight maneuvers

A series of flight experiments was conducted to obtain passenger subjective responses to closely controlled and repeatable flight maneuvers. In 8 test flights, reactions were obtained from 30 passenger subjects to a wide range of terminal-area maneuvers, including descents, turns, decelerations, and combinations thereof. Analysis of the passenger rating variance indicated that the objective of a repeatable flight passenger environment was achieved. Multiple linear regression models developed from the test data were used to define maneuver motion boundaries for specified degrees of passenger acceptance.

Schoonover, W. E., Jr.↗
NASA NTRS1975

The LANDSAT-1 multispectral scanner as a tool in the classification of inland lakes

Relationships between LANDSAT-1 multispectral scanner (MSS) data and the trophic status of a group of lakes in the north-northeastern part of the United States were studied by predicting the magnitudes of two trophic state indicators, estimating lake position on a multivariate trophic scale, and automatically classifying lakes according to their trophic state. Initially, the principal component ordination was employed with 100 lakes. MSS data for some 20 lakes was then extracted from computer-compatible tapes (CCT) using a binary marking technique. The output was in the form of descriptive statistics and photographic concatenations. Color ratios were incorporated into regression models for the prediction of Secchi disc transparency, chlorophyll a, and lake position on the tropic scale. Results indicate that the LANDSAT-1 system, although handicapped by low spectral and spatial resolutions as well as excessive cloud cover, can be used as a supplemental data source in lake survey programs.

Boland, D. H. P.↗
NASA NTRS1976

Ocean color spectra measured off the Oregon coast - Characteristic vectors

The ocean color spectrum is defined as the ratio of the spectrum of light upwelled from the sea to the spectrum of light incident on the sea surface. Ocean color spectra, observed from an airplane flown over waters off Oregon, are analyzed. The original spectra are resolved into fifty-five wavelength bands, each 5 nm wide. The shapes of these spectra are parameterized by, and shown to be accurately recoverable from, their first four principal components. These components are the scalar projections of each spectrum on the first four characteristic vectors of the sample covariance matrix. Regression equations are found with which phytoplankton pigment concentration and water transparency may be estimated as linear functions of the principal components. Pigment concentration estimates thus obtained are imprecise. The poor fit is at least partly due to the inappropriateness of the linear regression model and the neglect of other optically important substances typically present in sea water.

Mueller, J. L.↗
NASA NTRS1978

Dynamics of cell degradation

The use of chemical and physical data as a supplement to linear regression models in the prediction of cell failure is discussed. Principal factors to be considered are the positive thickness and weight, and the negative thickness. A model for cell degradation and failure in accelerated life test cells is presented and predictions based on a teardown analysis are included.

Mcdermott, P. P.↗
NASA NTRS1978

LACIE (Large Area Crop Inventory Experiment) Programme

Large Area Crop Inventory Experiment was a three year experiment conducted jointly by the United States Department of Agriculture, NASA, and NOAA (National Oceanic and Atmospheric Administration) to determine if global wheat production can be forecast from LANDSAT data to within 90% of actual yield for each observed 9 years out of 10. Data for the third crop year (1976-1977) was compiled. The proportional area of cultivated land devoted to wheat was estimated based on a statistical sampling of LANDSAT data. Yield is presently estimated by NOAA using regression models developed from historical weather and yield information. Results are discussed.

Whitman, R. I.↗