SEARCH · Engineering Papers

Results for “reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Properties of interstellar dust in reflection nebulae

Observations of interstellar dust in reflection nebulae are the closest analog in the interstellar medium to studies of cometary dust in our solar system. The presence of a bright star near the reflection nebula dust provides the opportunity to study both the reflection and emission characteristics of interstellar dust. At 0.1 to 1 micrometer, the reflection nebula emission is due to starlight scattered by dust. The albedo and scattering phase function of the dust is determined from observations of the scattered light. At 50 to 200 micrometers, thermal emission from the dust in equilibrium with the stellar radiation field is observed. The derived dust temperature determines the relative values of the absorption coefficient of the dust at wavelengths where the stellar energy is absorbed and at far infrared wavelengths where the absorbed energy is reradiated. These emission mechanisms directly relate to those seen in the near and mid infrared spectra of comets. In a reflection nebula the dust is observed at much larger distances from the star than in our solar system, so that the equilibrium dust temperature is 50 K rather than 300 K. Thus, in reflection nebulae, thermal emission from dust is emitted at 50 to 200 micrometer.

Sellgren, Kristin↗

NASA NTRS1990

Measuring and modeling near-surface reflected and emitted radiation fluxes at the FIFE site

Information is presented pertaining to the measurement and estimation of reflected and emitted components of the radiation balance. Information is included about reflectance and transmittance of solar radiation from and through the leaves of some grass and forb prairie species, bidirectional reflectance from a prairie canopy is discussed and measured and estimated fluxes are described of incoming and outgoing longwave and shortwave radiation. Results of the study showed only very small differences in reflectances and transmittances for the adaxial and abaxial surfaces of grass species in the visible and infrared wavebands, but some differences in the infrared wavebands were noted for the forbs. Reflectance from the prairie canopy changed as a function of solar and view zenith angles in the solar principal plane with definite asymmetry about nadir. The surface temperature of prairie canopies was found to vary by as much as 5 C depending on view zenith and azimuth position and on the solar azimuth. Aerodynamic temperature calculated from measured sensible heat fluxes ranged from 0 to 3 C higher than nadir-viewed temperatures. Models were developed to estimate incoming and reflected shortwave radiation from data collected with a Barnes Modular Multiband Radiometer. Several algorithms for estimating incoming longwave radiation were evaluated and compared to actual measures of that parameter. Net radiation was calculated using the estimated components of the shortwave radiation streams, determined from the algorithms developed, and from the longwave radiation streams provided by the Brunt, modified Deacon, and the Stefan-Boltzmann models. Estimates of net radiation were compared to measured values and found to be within the measurement error of the net radiometers used in the study.

Blad, Blaine L.↗

NASA NTRS1990

Reflectivities of uniform and broken stratiform clouds: An update

The reflectivities of uniform and broken stratiform clouds obtained from the NOAA-9 and NOAA-10 overpasses collected during the FIRE Marine Stratocumulus Intensive Field Observations (IFO) were compared, and these reflectivities were compared with those obtained through radiative transfer calculation performed for plane-parallel cloud models. The objective was to determine the extent to which plane-parallel radiative transfer calculations could reproduce the reflectivities observed for uniform clouds and to determine the extent to which finite cloud effects cause broken clouds to reflect differently than uniform clouds. The latter study is to provide guidance in the parameterization of finite cloud effects in general circulation climate models as well as to assess the ability of plane-parallel theory, which is used by ISCCP to retrieve cloud properties, to treat the reflectivities of broken clouds. Some results from this study were reported at the last FIRE Science Team meeting and some were reported elsewhere (Coakley and Briegleb, 1989). Improvements since the previous reports include: (1) the analysis of additional satellite passes, and (2) a modification to the analysis which helps to show the significance of the differences in reflectivities for uniform and broken clouds.

Coakley, James A., Jr.↗

NASA NTRS1990

Satellite-derived reflectance of snow-covered surfaces in northern Minnesota

The reflectance of snow-covered surfaces in Minnesota is analyzed using Landsat-5 Thematic Mapper satellite data. Calculations are performed for satellite-derived reflectances integrated over the spectral region (0.45-0.9 micron). Corrections are applied for atmospheric effects and integrated reflectances (R1) are compared over agricultural and forested areas and over a lake using TM scenes acquired in November 1984 and January 1985. Integrated reflectances are then mapped and inter- and intra-scene comparisons of surface reflectance are compared. Temporal analysis of reflectance changes can then be performed rapidly and efficiently using color-coded images. It is noted that the average R1 within the November 1984 subscene was 0.429 + or - 0.176, whereas R1 within the January 1985 subscene was 0.669 + or - 0.236.

Hall, D. K.↗

NASA NTRS1991

Spectral reflectance of thin snow

A radiative transfer model was used to calculate the spectral reflectance of thin snow overlying dark soil. Model results show that directional hemispherical reflectance depends on density, grain size, and solar and viewing geometries. Measurements of thin snow spectral Bidirectional Reflectance Distribution Function (BRDF) show that the reflectance in the visible wavelengths is reduced when the sensor is near nadir yet, at a viewing zenith of 75 degrees the same snowpack will appear to be optically thick. If the snow is sufficiently thin and snow grains are large, the spectral signature of the substrate may influence snow reflectance. This phenomenon was also detected in reflectance data collected using the ground based PIDAS (Portable Instantaneous Display and Analysis Spectrometer). Concurrent airborne data from the AVIRIS instrument (Advanced Visible/Infrared Imaging Spectrometer) show effects of thin snow and mixed pixels for areas of thin and patchy spring snow.

Nolin, Anne W.↗

NASA NTRS1992

Spectral infrared hemispherical reflectance measurements for LDEF tray clamps

This paper describes infrared hemispherical reflectance measurements (2-15 microns) that were made on 58 chromic acid anodized tray clamps retrieved from the LDEF spacecraft. These clamps were used for maintaining the experiments in place and were located at various locations about the spacecraft. Changes in reflectance of the tray clamps at these locations were compared with atomic oxygen fluxes at the same locations. A decrease in absorption band depth was seen for the surfaces exposed to space indicating that there was some surface layer erosion. In all of the surfaces measured, little evidence of contamination was observed and none of the samples showed evidence of the brown nicotine stain that was so prominent in other experiments. Total emissivity values were calculated for both exposed and unexposed tray clamp surfaces. Only small differences, usually less than 1 percent, were observed. The spectral reflectances were measured using a hemi-ellipsoidal mirror reflectometer matched with an interferometer spectrometer. The rapid scanning capability of the interferometer allowed the reflectance measurements to be made in a timely fashion. The ellipsoidal mirror has its two foci separated by 2 inches and located on the major axis. A blackbody source was located at one focus while the tray clamp samples were located at the conjugate focus. The blackbody radiation was modulated and then focused by the ellipsoid onto the tray clamps. Radiation reflected from the tray clamp was sampled by the interferometer by viewing through a hole in the ellipsoid. A gold mirror (reflectance approximately 98 percent) was used as the reference surface.

Wood, Bobby E.↗

NASA NTRS1991

Reflectance model for quantifying chlorophyll a in the presence of productivity degradation products

A reflectance model developed to estimate chlorophyll a concentrations in the presence of marine colored dissolved organic matter, pheopigments, detritus, and bacteria is presented. Nomograms and lookup tables are generated to describe the effects of different mixtures of chlorophyll a and these degradation products on the R(412):R(443) and R(443):R(565) remote-sensing reflectance or irradiance reflectance ratios. These are used to simulate the accuracy of potential ocean color satellite algorithms, assuming that atmospheric effects have been removed. For the California Current upwelling and offshore regions, with chlorophyll a not greater than 1.3 mg/cu m, the average error for chlorophyll a retrievals derived from irradiance reflectance data for degradation product-rich areas was reduced from +/-61 percent to +/-23 percent by application of an algorithm using two reflectance ratios rather than the commonly used algorithm applying a single reflectance ratio.

Carder, K. L.↗

NASA NTRS1992

Identification of a far-red reflectance response to ectomycorrhizae in slash pine

Spectral reflectances were measured for the canopies of Pinus elliottii seedlings that were inoculated versus noninoculated with the ectomycorrhizal fungus Pisolithus tinctorius. Reflectances of the less vigorous, noninoculated seedlings increased substantially at visible and near-IR wavelengths compared to the more vigorous, inoculated seedlings. An algorithm was developed to indicate the spectral regions in which reflectance was most sensitive to ectomycorrhizae. The reflectance curve of the more vigorous seedlings was used as a standard of comparison. The spectral regions defined by this algorithm are denoted as regions of maximum reflectance sensitivity. Far-red and near-IR photography filtered to the region of maximum sensitivity (700 nm) were used to enable visualization of a 'blue shift' reflectance response to decreased vigor in the noninoculated seedlings in response to these differences of mycorrhizal development.

Cibula, W. G.↗

NASA NTRS1992

A new scheme of force reflecting control

A new scheme of force reflecting control has been developed that incorporates position-error-based force reflection and robot compliance control. The operator is provided with a kinesthetic force feedback which is proportional to the position error between the operator-commanded and the actual position of the robot arm. Robot compliance control, which increases the effective compliance of the robot, is implemented by low pass filtering the outputs of the force/torque sensor mounted on the base of robot hand and using these signals to alter the operator's position command. This position-error-based force reflection scheme combined with shared compliance control has been implemented successfully to the Advanced Teleoperation system consisting of dissimilar master-slave arms. Stability measurements have demonstrated unprecedentedly high force reflection gains of up to 2 or 3, even though the slave arm is much stiffer than operator's hand holding the force reflecting hand controller. Peg-in-hole experiments were performed with eight different operating modes to evaluate the new force-reflecting control scheme. Best task performance resulted with this new control scheme.

Kim, Won S.↗

NASA NTRS1992

The x ray reflectivity of the AXAF VETA-I optics

The x-ray reflectivity of the VETA-I optic, the outermost shell of the AXAF x-ray telescope, with a bare Zerodur surface, is measured and compared with theoretical predictions. Measurements made at energies of 0.28, 0.9, 1.5, 2.1, and 2.3 keV are compared with predictions based on ray trace calculations. The data were obtained at the x-ray calibrations facility at Marshall Space Flight Center with an electron impact x-ray source located 528 m from the grazing incidence mirror. The source used photoelectric absorption filters to eliminate bremsstrahlung continuum. The mirror has a diameter of 1.2 m and a focal length of 10 m. The incident and reflected x-ray flux are detected using two proportional counters, one located in the incident beam of x-rays at the entrance aperture of the VETA-I, and the other in the focal plane behind an aperture of variable size. Results on the variation of the reflectivity with energy as well as the absolute value of the reflectivity are presented. We also present a synchrotron reflectivity measurement with high energy resolution over the range 0.26 to 1.8 keV on a flat Zerodur sample, done at NSLS. We present evidence for contamination of the flat by a thin layer of carbon on the surface, and the possibility of alteration of the surface composition of the VETA-I mirror perhaps by the polishing technique. The overall agreement between the measured and calculated effective area of VETA-I is between 2.6 percent and 10 percent, depending on which model for the surface composition is adopted. Measurements at individual energies deviate from the best-fitting calculation to 0.3 to 0.8 percent, averaging 0.6 percent at energies below the high energy cutoff of the mirror reflectivity, and are as high as 20.7 percent at the cutoff. We also discuss the approach to the final preflight calibration of the full AXAF flight mirror.

Kellogg, Edwin M.↗

NASA NTRS1992

Surface reflectance retrieval from satellite and aircraft sensors - Results of sensors and algorithm comparisons during FIFE

Visible to shortwave infrared radiometric data collected by a number of remote sensing instruments on aircraft and satellite platforms were compared over common areas in the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) site on August 4, 1989, to assess their radiometric consistency and the adequacy of atmospheric correction algorithms. The instruments in the study included the Landsat 5 Thematic Mapper (TM), the SPOT 1 high-resolution visible (HRV) 1 sensor, the NS001 Thematic Mapper simulator, and the modular multispectral radiometers (MMRs). Atmospheric correction routines analyzed were an algorithm developed for FIFE, LOWTRAN 7, and 5S. A comparison between corresponding bands of the SPOT 1 HRV 1 and the Landsat 5 TM sensors indicated that the two instruments were radiometrically consistent to within about 5 percent. Retrieved surface reflectance factors using the FIFE algorithm over one site under clear atmospheric conditions indicated a capability to determine near-nadir surface reflectance factors to within about 0.01 at a reflectance of 0.06 in the visible (0.4-0.7 microns) and about 0.30 in the near infrared (0.7-1.2 microns) for all but the NS001 sensor. All three atmospheric correction procedures produced absolute reflectances to within 0.005 in the visible and near infrared. In the shortwave infrared (1.2-2.5 microns) region the three algorithms differed in the retrieved surface reflectances primarily owing to differences in predicted gaseous absorption. Although uncertainties in the measured surface reflectance in the shortwave infrared precluded definitive results, the 5S code appeared to predict gaseous transmission marginally more accurately than LOWTRAN 7.

Markham, B. L.↗

NASA NTRS1992

A simple analytical function for bidirectional reflectance

A simple bidirectional reflectance model based on physical scattering laws is developed to calculate the bidirectional reflectance of a wide variety of surfaces. Chandrasekhar's radiative transfer solution, obtained for the anisotropically scattering semi-infinite medium, is used to compute the multiple-scattered radiances. However, since the radiative transfer solution does not take architectural effects into consideration, we adopt Hapke's (1986) approach and add an empirical term to explain the hot-spot phenomenon and use Cox and Munk's (1954) formulation to take into account the specular reflection. The physical parameters of the model are retrieved from bidirectional reflectance measurements. For each surface, only one set of model parameters is needed for application to all illumination and viewing geometries. The validity of the model is established by comparing the computed and measured reflectances for sets of viewing and illumination angles that were not included in the inversion algorithm. Good agreement is shown between the model-computed and the observed reflectances for dense prairie vegetation canopies, a sparse desert scrub community, a plowed agricultural field, and an alkali flat.

Ahmad, Suraiya P.↗

NASA NTRS1993

Discrete ordinates solutions of nongray radiative transfer with diffusely reflecting walls

Nongray gas radiation in a plane parallel slab bounded by gray, diffusely reflecting walls is studied using the discrete ordinates method. The spectral equation of transfer is averaged over a narrow wavenumber interval preserving the spectral correlation effect. The governing equations are derived by considering the history of multiple reflections between two reflecting wails. A closure approximation is applied so that only a finite number of reflections have to be explicitly included. The closure solutions express the physics of the problem to a very high degree and show relatively little error. Numerical solutions are obtained by applying a statistical narrow-band model for gas properties and a discrete ordinates code. The net radiative wail heat fluxes and the radiative source distributions are obtained for different temperature profiles. A zeroth-degree formulation, where no wall reflection is handled explicitly, is sufficient to predict the radiative transfer accurately for most cases considered, when compared with increasingly accurate solutions based on explicitly tracing a larger number of wail reflections without any closure approximation applied.

Menart, J. A.↗

NASA NTRS1993

Near-specular reflection of ions at quasi-parallel shocks

One-dimensional hybrid simulations and a semianalytical model of the shock front are employed to investigate the source regions in the incident ion phase space of reflected and transmitted ions, the relative importance of the electric and magnetic forces in the reflection of incident ions, and how these characteristics change in time. The phase space origin of reflected particles and the fraction of incident ions that reflect are found to depend on the electromagnetic field structure of the shock front at the time the ions encounter it. The reflection fraction is maximized when the electric field along the shock normal (Ex) and the noncoplanar magnetic field (By) are at their maximum values. When Ex and By are large, the reflection process produces a beam that is cooler, more dense, and closer to specular than when they are small.

Mckean, M. E.↗

NASA NTRS1992

Alfven wave reflection and heating in coronal holes - Theory and observation

We present evidence for significant reflection of Alfven waves in an isothermal, hydrostatic model corona and that heating in coronal holes is provided by Alfven waves. For Alfven waves with periods of 5 min, upward propagating waves are reflected if the temperature is less than 10 exp 6 K, but escape into the solar wind if the temperature is greater than 10 exp 6 K. This sensitive temperature dependence may provide the self-limiting mechanism that has been suspected to exist because the reflected waves result in heating which raises the temperature which, in turn, decreases the reflection. The reflection occurs mostly inside of about 6 solar radii, depending on temperature, wave period, and magnetic field strength and geometry. The importance of this process has often been overlooked due to a poor choice of coronal Alfven speed and temperature. SOHO is well-suited to measure whether the required properties for reflection exist. Solar Probe, however, is the only definitive experiment to show if the waves actually exist to the degree necessary.

Suess, S. T.↗

NASA NTRS1992

High-flux source of low-energy neutral beams using reflection of ions from metals

Reflection of low-energy ions from surfaces can be applied as a method of producing high-flux beams of low-energy neutral particles, and is an important effect in several areas of plasma technology, such as in the edge region of fusion devices. We have developed a beam source based on acceleration and reflection of ions from a magnetically confined coaxial RF plasma source. The beam provides a large enough flux to allow the energy distribution of the reflected neutrals to be measured despite the inefficiency of detection, by means of an electrostatic cylindrical mirror analyzer coupled with a quadrupole mass spectrometer. Energy distributions have been measured for oxygen, nitrogen, and inert gas ions incident with from 15 to 70 eV reflected from amorphous metal surfaces of several compositions. For ions of lighter atomic mass than the reflecting metal, reflected beams have peaked energy distributions; beams with the peak at 4-32 eV have been measured. The energy and mass dependences of the energy distributions as well as measurements of absolute flux, and angular distribution and divergence are reported. Applications of the neutral beams produced are described.

Cuthbertson, John W.↗

NASA NTRS1992

Grazing incidence X-ray reflectivity - Studies for the AXAF observatory

The energy bandwidth and total throughput of a grazing incidence optics system is a strong function of the X-ray reflectivity of the surface coating. In support of the Advanced X-ray Astrophysics Facility (AXAF), studies are underway to evaluate and characterize the reflectivity of potential AXAF coatings. Here we report on results obtained for Au, Ir, and Ni coatings produced by electron-beam evaporation, evaporation with ion-assist, and sputtering. Effects of coating thickness and deposition angle have been evaluated at 6.4 and 8.1 keV; the highest reflectivities are those of the thinner, about 200 A vs about 700 A, coatings. While considerable variations exist, the best Ir samples have higher reflectivity than any of the Au coatings. Data results have been compared with models for theoretical reflectivity, particularly with regard to the effective density of the coatings. Independent measurements of the coating densities have been carried out for comparison with the reflectivity results.

Slane, P.↗

NASA NTRS1992

LAI inversion from optical reflectance using a neural network trained with a multiple scattering model

The inversion of the leaf area index (LAI) canopy parameter from optical spectral reflectance measurements is obtained using a backpropagation artificial neural network trained using input-output pairs generated by a multiple scattering reflectance model. The problem of LAI estimation over sparse canopies (LAI < 1.0) with varying soil reflectance backgrounds is particularly difficult. Standard multiple regression methods applied to canopies within a single homogeneous soil type yield good results but perform unacceptably when applied across soil boundaries, resulting in absolute percentage errors of >1000 percent for low LAI. Minimization methods applied to merit functions constructed from differences between measured reflectances and predicted reflectances using multiple-scattering models are unacceptably sensitive to a good initial guess for the desired parameter. In contrast, the neural network reported generally yields absolute percentage errors of <30 percent when weighting coefficients trained on one soil type were applied to predicted canopy reflectance at a different soil background.

Smith, James A.↗